I have just tried to instal the latest version of itunes, it failed and i have amessage that says ' an application has made an attempt to load the C routine library incorrectly@ also error 7 windows 1114. I have totally uninstalled itunes and cannot eve
I have just tried to instal the latest version of itunes. It failed and I got a message saying ' An application has made an attempt to load the C runtime library incorrectly' I completely uninstalled itunes and tried to install an earlier version and got the same message. So I can no longer access my itunes files. Help
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates
Similar Messages
-
can't re load itunes either
Hi sharonstampsalot,
Welcome to the Support Communities!
The article below may be able to help you with this.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
I hope this information helps ....
- Judy -
how do i sort out error r6034 on my windows vista when i try to start itunes ???
the message box is from microsoft visual c++runtime library, it says an application has made an attempt to load the C runtime library incorrectly, P;ease contact the application's support team for more information.Hey deepakmenonfrompune,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M. -
How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info
Hey Debbiered1,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Take care,
Delgadoh -
I updated the Itunes on my computer and it begin having problems. I tryed a new installation and there is a message saying an application has made an attempt to load C runtime library incorrectly. What shoul I do?
Hello rvalle3,
The following article can help get iTunes updated and running again.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen -
Need to add something in the message!
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99928) -
When im trying to download itunes it keeps saying R6034 application has made an attempt to load the C runtime library incorrectly error 7 windows error 1114
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forum.
Regards. -
When I finished backing up my iphone 5 to my hp pavilion laptop I got an error message R6034. Itunes shut down and I have not been able to reinstall it. The error message says an application has made an attempt to load the C runtime library incorrectly. My computer is more than 5 years old and I have never had this problem before. I tried unsuccessfully to reinstall itunes. Any ideas?
bdaumenHello iTunes_Bad_Update,
The following article provides information and troubleshooting steps that can help get iTunes back up and running.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen -
I updated itunes. Now it doesn't run. I keep getting -" Runtime error Program Files (x86)...itunes helper R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact support team."
Well how do you do that without owning a MAC? This error pops up every time I start my computer. The other pop up says Error 7 (Windows error 1114)
I have uninstalled itunes and re-installed it (I still get the pop up after itunes was uninstalled.)
I can't find a restore point before the latest update. And I can't run itunes on my Windows 7 computer. Any advice out there?Do the following:
Uninstall from Windows the following five programs: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support. You do this from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Download the latest version of iTunes from Apple and note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator, just Right click iTunes installer and Run as Administrator. -
I tried to install the latest version of iTunes on my Windows PC, but the installation failed and I have the error message "Runtime Error R6034 An application has made an attempt to load the C runtime library incorrectly." When I then tried to run iTunes (assuming that, since the new install failed, my older version was still OK) I got the message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114". I tried then uninstalling iTunes and reinstalling it fresh, but encountered the same problems. Help!
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
I upgraded to the latest iTunes 11.1.4, after a prompt from the iTunes store. But will not open after the upgrade. One of three error messages told me to reinstall. I did. Restarted and scanned. But no help there. So I unistalled and re installed from Apples' website. The installation was okay as usual but still will not open. Keep getting the same error messages. '' Runtime Error R6034, '' '' An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.'' That's the error messages I get when I try to open the New installed iTunes 11.1.4. Right now there is no iTunes on any of my PCs. Installed but will not open. Please Help.Thanks.
Jonas.
3 Windows PCs. Safari 5.1.5 ( One Laptop with Vista. Two Windows 7 64 bit on All in One Sony desktop PCs. )Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
my itunes will not open! is giving me error7(windows error 1114) RUNING TIME ERROR, PROGRAM FILES\ITUNESHELPER.EXE R6034 An application has made an attempt to load the C runtime library incorrectly. I must contact the application support team for imformation and i tried downloading itunes like 10 times and is saying the same thing. Please help! i need to sync my ipads and ipods thank you!
Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086
-
I tried downloading the new update for my desktop PC I get the following error messages:
Visual C++ Runtime library
R6034
an application has made an attempt to load the C runtime library incorrectly Error 7 Windows Error 1114Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99907) -
Just did the iTunes update that iTunes said was available, now iTunes won't open. I just keep getting a Runtime Error message.
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
Is anyone else having this problem?
I tried to re-install and got the following message: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)
Does this mean I have now lost everything?I just had the same error:
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says. I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
Good luck! -
I am trying to run the latest Itunes update and I am getting 2 error messages:
Runtime error!
Program:C:\program files(x86)\itunes\itunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly
Please contact the applications support team for more information.
second message:
Itunes was not installed correctly, please reinstall Itunes.
Error 7( Windows error 1114)Hi 623connor,
Thanks for using Apple Support Communities. I would recommend trying a thorough reinstall of iTunes as described here:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Cheers,
- Ari
Maybe you are looking for
-
How to update the dunning level and dunning details: BAPI/FM??
Hi All, I need to update the dunning history details(dunning level) for a contract account. I am using the table FKKMAKO(dunning header). Let me know if there is a Function module/BAPI/ any other way to update the dunning history details Regards Shiv
-
Hi I want to procure same material from same vendor for different plants with different unit of measure.I tried maintaining different unit of measure in inforecord but it is not posible... How to maintian differnet unit of measure with plant level fo
-
HP Officejet 6500A Printer will not connect to WPA wireless network.
An HP Network Configuartion Report from my printer states that the printer's Authentication Type is WPA-PSK. My router is WPA2 or WPA and won't connect to the printer. What is the solution to this problem?
-
WebDynpro Does Not Recognize the Data Type
I've had this problem happen to me before, but I can't remember how to resolve it. Basically, there is an SAP tutorial on the GeoMap that says to create a contect attribute with a type of com.sap.ide.webdynpro.uielementdefinitions.GeoObject When I go
-
I down loaded iBank to my computer but have decided not to use it. How do I delete it from my Mac