I have just updated my phone its iphone 4 and when it was updated it demanded something like to restore an d mobile went off ,i dont wanna lose all my data so help me out what to do ,Thanks
i have just updated my phone its iphone 4 and when it was updated it demanded something like to restore an d mobile went off ,i dont wanna lose all my data so help me out what to do ,Thanks
yeah its really like that you mentined , so what to do now .
current situation is that i havent yet restored it,phone is off asking for connecting to itunes and after connecting it is demanding for restore, so where can i access to backup data ?
Similar Messages
-
i have macbook pro i got it from craiglist, when i was updating the oprating sestem its asking me for sestem unlocking pin? where can i get it from?
I would recommend wiping the system and reinstalling the OS for any used system. OS X does not have any "unlocking pin" of sorts so this may be from some third-party software on the system. The system does have a "firmware password" option that can be set to prevent booting to alternative boot environments (ie, external hard drives, safe mode, etc), but this will not prevent system updating.
-
I have a new iPhone and when it was activated at the store I had not saved my pictures. I there still a way that I can download the pictures from the old phone since it does not have service anymore?
No.
-
hello good morning would help me with something last night started to charge my iPhone and when it was fully charged the night off and the battery was consumed alone and without any battery dawned
Hi, had the same problem with my ipad.
First of all I would suggest to close all apps which might be opened (maybe one is working without that you know).
To close the apps press twice in a row the home button and keep a finger on the first app which appesars on the lower band until the entire row starts moving. then press the red MINUS on all oyur apps in order to close them all.
Then switch on and off your phone and see whether the battery is still draining.
if this continues try to keep you phone on a flight modus to see if this is due to internet connection.
maybe you should review some of your settings, as notifications, bluetooth, push services etc. (see specific topics on how to save battery).
If you still have not solved your problem try to restart you phone as a new one (after that you can re-download all your apps). 8do this by using itunes)
remind to save your data (e.g. pictures) prior to this operation. -
I have just required a second hand mac and when I try to download a song or import a cd to iTunes an error notice says that I am not priveledged to make changes? The preference settings and apple I'd seem to be ok. How do I fix this?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
i was in the process of jailbreaking and updating my ipod and when i was updating it,it went into recovery mode and now i cant get it out of recovery mode so what can i do??
Go elsewhere:
Jailbreaking voids the Apple warranty and also means that you will not get any support from Apple, including from this Apple forum. Jailbreaking can't be discussed in this Apple forum.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and other issues -
I am trying to update to Itunes 10.5 and when i click update a message comes up cannot find url..
I am trying to update to Itunes 10.5 and when i click update a message comes up cannot find url..any idea what this means
Easyest way is to uninstal itunes manualy and then download new itunes from apple.com .
-
I have just brought home my new IPhone 5 and realised I don't know how to use it as a phone. I have been used to a very simple phone before this!
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
-
I was loading the latest software update to "fix bugs and security issues" and my phone went into "recovery mode". I've never seen this before. I plugged it into iTunes as shown on the screen of my phone and it says "Iphone in recovery mode detected" and suggested resetting the phone to factory settings. I don't want to lose all my data so is there another way to fix it? All help will be appreciated!
Sorry, whatever data you had on your phone has been wipe off already, since your phone is in recovery mode.
You will need to restore your phone. Then if you have a backup, you can choose that backup to restore from, if you have no backup, your only option is to sync contents from iTunes. -
Hi, Everyone my Uncle gifted me a New Iphone 4 From Us which was At&t
I live in Saudi Arabia, Jeddah As iphone was not In Service So i used a Application SAM then when i connected to itunes iphones latest ios version was available ios 6.1.2 i updated and installed it so now i have to Activate Iphone and itunes is telling
We're sorry, we are unable to continue with your activation at this time.
Please try again later, or contact customer care.
what to do pls help if u nwThat would be the wireless number assigned by AT&T when the purchaser of the iPhone signed up as a customer with AT&T. If neither you nor your uncle ever activated the iPhone with AT&T, click the "non customer" button.
Note that jailbreaking often renders it impossible to get an iPhone officially unlocked, so don't be surprised if it fails. If it does, then you may have to buy a new iPhone, this time one that is officially unlocked.
Regards. -
I have just downloaded ios7 on my iphone and the terms and conditions is frozen?
Hi
I have just downloade ios7 on my iphone 4 and in my set-up, I can not seem to get past terms and coniditions, I read and select accept but nothing happens, Help, is this frozen for some reason?Check this post...
https://discussions.apple.com/message/23031158#23031158 -
I'm trying to restore my 3GS from a previous back-up point on my PC, but I can't remember the password and if I wrote it down I can't find it. I don't want to do a complete factory restore as I'll lose all my data (phone numbers etc) and I still won't be able to access the restore data. Can anyone help?
If you forgot the passcode for the lock screen, follow this article, connect in recovery mode iOS: Unable to update or restore and restore: iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
If you can't remember the password for your encrypted backup, you'll have to start all over again:
iTunes: About iOS backups
iTunes and encrypted backups
In the iTunes Summary screen, select "Encrypt iPhone backup" if you want to encrypt the information stored on your computer when iTunes makes a backup. Encrypted backups are indicated by a padlock icon, and a password is required to restore the information to iPhone. You may want to write down the password for your backup and store it in a safe place. If you use a Mac, when you set a password you can select to store the password in the keychain. With iOS 4 and later, you can transfer the iOS keychain backup to a new device if you encrypt the backup.
Warning: If you encrypt an iPhone backup in iTunes and then forget your password, you will not be able to restore from backup and your data will be unrecoverable. If you forget the password, you can continue to back up and use the device, however you will not be able to restore the encrypted backup to any device without the password. You do not need to enter the password for your backup each time you back up or sync.
If you cannot remember the password and want to start again, you must perform a full software restore and when iTunes prompts you to select the backup from which to restore, choose set up as a new device. -
Updated to 4.0 version and when it finished loading I got 4 identical Firefox icons on my desktop. I went back in time on my computer to go back to an order version and Firefox won't open or is very slow to open.
Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0: http://www.mozilla.com/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
* It may not be necessary to create a new profile, so first try if it works with your current profile and if not then create a new profile.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
I have just tried to update my iphone 4 to iso 6, it got almost all the way through then froze. the only screen i get now is with the itunes icon and picture of a usb cable end. I can turn it on and off but not reboot or do anything else. Further more the computor now does not recognise the phone being connected/disconnected. Help please!
Follow the troubleshooting steps shown in item #5 at the bottom of this article: http://support.apple.com/kb/TS1538, under "If the device is not recognized while in recovery mode".
-
hello all,
i have jus bougth a mac book pro, whenever i connect my data card to access internet i'm getting a warning saying " please restart your system by pressing the power button and switch on again". i can access for only few mins or secs then it again shows same warning. please do help me out with this problem.
Thanking you.Hi,
i had same issue some years back. sure my operator was different from yours. unfortunatly some of these 3rd party products dont spend much effort on a mac. My one had half a dozent programs, for each version of OSX one. When i called them up the gave me the correct version which worked. You may have not the right one. May try first the MAC and ensure it works fine without the card and that software.
Maybe you are looking for
-
Problem in SE80 - Objects are not showing up
Hi, Let say example zrad package has function groups and reports but those function group and reports not showing in se80 transation. If i enter the package name only the package name alone showing. Thanks & Regards, Gowri Sankar
-
Hi Gurus, I have a Table in database (53 Million records) Eg: Employee Table I Reverse Eng. Table and as i want only Records with Employee Id: 1 to 10 as a source to my target table. I applied the filter in the source datastore. And, able to do ma
-
Hi Jdev Team: what is the availability date for Jdev 3.0. We are starting a new project and I want to evaluate different options. thanks in advance :-) null
-
HT2375 key rig 49 does not work?
how to set up key rig 49 M audio keyboard with logic pro9?
-
Averaging values in 2-D Array in a circular area
I'm trying to average temperature values in a 2-D array, rectangular coordinates, over a circular area. Is there a sub-array function that works in polar coordinates, that I could utilize? Any suggestions would be much appreciated. Solved! Go to So