I have MacBook Pro and updated to OS Maverick. Now it says my iPhoto is not supported. Any suggestions?
I have MacBook Pro and updated to OS Maverick. Now it says my iPhoto is not supported. Any suggestions?
It should be made clearer that the iLife components are different for Mavericks:iLife: System requirements
Similar Messages
-
Apple put a new hard drive into my MacBook Pro and updated it from Lion to Maverick. They did not put iPhoto and iWeb on it but I did have it in Lion. They also didn't put Pages, Keynote or Numbers back on it until I argued with them. Of course, I didn't have my data backed up. My hard drive was destroyed when I tried to install the update of Mavericks myself. I should not have to buy iWeb and iPhoto when I already had them. Suggestions?
cwhargrave,
have you tried looking in the App Store, to see if you can redownload iWeb and iPhoto there gratis?
If you haven’t done so already, you should purchase an external hard drive to act as a Time Machine backup destination, so that you’ll have an option to rollback to a working environment if a new OS installation is troublesome. -
i bought macbook pro and update my osx, i already have the codes and install mountain lion and its been 2 days now and still downloading mode
Disable anti virus software.
Apps such as Little Snitch, Net Nanny, and Hands Off can prevent apps from downloading including Mountain Lion as well as third party download managers.
Keep in mind, for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
If you need to reinstall OS X or repair the the startup disk using Mountain Lion Recovery, that requires broadband access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation. -
Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas?Maverick and Your System message
I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
Any ideas? -
I have macbook pro and am on OS X Yosemite 10.10.2 . I am having lot of warning message on my browser that my computer is infected with malware/spyware and use mackeeper. How do I solve this issue . This is happening more on chrome and Safari browser
There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware. Follow Apple Support's instructions to remove it.
If you have trouble following those instructions, see below.
Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
com.something.daemon.plist
and
com.something.helper.plist
Here something is a variable string of characters, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes it's a meaningless string such as "e8dec5ae7fc75c28" rather than a word. Sometimes the string is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
com.something.agent.plist
where the string something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
something
where something is the same string you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name; it doesn't vary. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
I just bought a new macbook pro and my CS6 migrated, but now when I open existing documents, it launches a free trial version. There doesn't appear to be a way to enter my serial number or communicate that I simply have a new computer. HELP! There is no customer support for this. I can't believe what a poor service company Adobe is!!
The problem was that you migrated CS6. Unfortunately, migration doesn't work because it doesn't move all the files.
First, you'll need to use the Adobe Cleaner Tool to remove the components that were installed:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Second, you should install a clean copy of CS6. Here is a link:
Other downloads -
I have Macbook Pro and Adobe CC. 3D won't work.. I can open the 3D panel options but clicking ok or even choosing preview brings up an error message [can't]
My friend has exact same Mac and CC and he has the same problem. We both have up to date Yosemite and CC versions.
Any ideas?Hi,
Could you please confirm the CC application you are using.
It would be great if you post a screenshot of the problem.
Regards,
Sumit Singh -
Hello, I have MacBook Pro and whenever I start Aperature 3 it stays on for about 5 minutes then it shuts down with an error of shutting down unexpected... anything??
Also does anyone know how to take something from one picture and add it to another in aperature?
Thank you!!!I had the exact same problem. Here is what an Apple Support person told me to do - and it worked like a charm!
Go to your APPLICATIONS Folder. Find a folder within that folder called TOOLBARS. Remove the ENTIRE folder. Once you remove that folder, your Aperture should work perfectly.
There is something in that folder that you don't need that messes with Aperture. Try it. Mine worked perfectly! -
Hi,
I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
So please suggest proper direction to use it and provide link to install any driver.
Thanks
Tauheed AhmadYes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and 3.0 knowledge. They handsUp that reason I posted my problem in this forum.
So is there any better solution to use any mediator between these USB version handling, Please let me know.
Thanks
Tauheed -
Photoshop elements 10 will not migrate to my new macbook pro/retina display. There is no CD/DVD player on this machine. Any suggestions on how to get Elements onto my machine? Yes, I have the disk(s). Am I going to have to buy an external CD/DVD player to load this one program:(
I have ordered a USB3 BluRay/DVD/CD player/burner and will use that both with my iMac ( in which the Superdrive seems to be failing ) and the MBPro Retina I just bought .
-
Brand new iPhone 4 (unlocked), got it activated yesterday, and speakers doesn't work, did restore back to factory settings, not luck, any suggestions. This iPhone was purchased in US, currently in India, will Apple support in India?
There are many threads on this forum regarding speaker not working issues. You might try searching them. Hopefully you'll find the answer you need.
BTW, the iPhone only has ONE speaker. -
Hi,
I have a macbook pro and when making outgoing calls on facetime I get to connecting but it never does connect, however I can receive incoming calls. Any suggestions please?Hey there kakitiga,
It sounds like you are trying to make a call with FaceTime, it never finishes connecting to the person you are trying to reach. I want to recommend the troubleshooting steps from this article named:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/ts4185
If you encounter issues making or receiving FaceTime calls, try the following:
Verify that FaceTime is enabled in FaceTime > Preferences.If the issue persists, or if you see the message "Waiting for Activation", try toggling FaceTime off and then on.
Verify that the Date, Time, and Time Zone are set correctly:
From the Apple () menu, choose System Preferences > Date & Time > Date & Time.
Enable "Set Automatically".
Click the Time Zone tab and confirm the closest city is correct.
Verify that both parties are connected to an active broadband Internet connection.
See Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection.
Consult Using FaceTime behind a firewall for necessary ports to open in firewalls, security software and routers.
If you encounter issues using a Wi-Fi network, use standard Wi-Fi network troubleshooting to resolve interference and other issues.
Verify the phone number or email address being used is the correct one activated for FaceTime.You can verify that you are using a valid Apple ID at appleid.apple.com. You can also create an Apple ID or reset your password from this website.
Verify that both parties have installed the latest software updates for their Mac and/or device. See:
Mac OS X: Updating your software
iOS: How to update your iPhone, iPad, or iPod touch
Thank you for using Apple Support Communities.
All the best,
Sterling -
I have a new mac book pro and the os x mavericks says I don't have this and it won't install. What do I do? Thank you.
If you have a new MacBook Pro, it should already have Mavericks (10.9). To verify, click the Apple logo in the top left corner and select "About this Mac". What does it state for version?
-
I have a macbook pro and i reformat my laptop. I don't have many of the appictons or even icloud no more. How do I get all these back in?
Your signature says you have 10.6.8 - is this correct? There is no iCloud on 10.6.8 - if you had upgraded to Lion, but then reformatted and used the disks which came with your Mac you would have installed an older system, presumably 10.6.8? You will need to go through the upgrade process again to get Lion, so that you can access iCloud.
As to the apps, those which were not part of the installed system (such as Mail, Safari, etc.) will have to be reinstalled either from the original installers or a backup, and your actual files will have to be restored from a backup. -
I own a MacBook Pro and an iMac. How can I copy my iPhoto library from my MacBook to the iMac?
I own a 13" MacBook Pro and a 27" iMac and I have different iPhoto libraries for each one of them.
How can I copy the iPhoto library from the MacBook to the iMac without losing the pictures I have on the iMac library?
Is it possible to merge the libraries?
Can I do this without using an external HDD? (e.g. connecting them through an ethernet cable?)
Thanks for your help!1. By eirher a: renaming one of the Libraries or b: copying them to another folder
2. If you have Aperture 3.3 or later and iPhoto 9.3 or later you can merge libraries with Aperture.
Otherwise the only way to merge Libraries is with the paid ($20) version of iPhoto Library Manager
3. Yes.
Maybe you are looking for
-
Taglib: class not found in jar-file
I've got the following problem: I whant to deploy a taglib to tomcat 5.0.25. If I point to the jsp which uses the taglib I got the following error: org.apache.jasper.JasperException: Unable to read TLD "META-INF/taglib.tld" from JAR file "file:/C:/Pr
-
WinXP SP3 desktop Installed: Acrobat Reader 9 and Acrobat 6.0 Professional Up until recently, when an update from MS and adobe were installed, Internet Explorer 7 has been displaying PDF files when clicking on a link to the document. I do not know wh
-
Hello people how can i connect mac pro imac as monitor whit mini display
hello people i have aproblem with my comp mac pro with 5770 ati card i want to use that to let the imac use as monitor oke please respons i am from the duth
-
Any way to get my name off ipod screen?
My 10 yr. old daughter received the silver 4g nano for her birthday. Ipods are new to us.... we finally figured out how to download songs and all on my computer, for some reason it says "Mindy's Ipod" on the screen (that's my name and not hers) she l
-
Ichiers raw non rennus par photoshop elements 6
bonjour, je viens d'acheter et d'installer photoshop elements 6 sous mac. malheureusement il ne reconnait pas mes fichiers raw pentax en .PEF. j'ai téléchargé camera raw dernière version car il était indiqué reconnaître le pentax K20D, mais je n'ai p