I have one contact that i have been texting for months. About 5 hours ago, when I send a text I get an error message that the text couldnt be sent.  However, when I send a picture with a text message, then it goes through to the contact.  Why am I getting

I have one contact that I've been texting for months,  about 5 hours ago, I started receiving an error that the text was not sent.  However, if I text a picture and then text with the picture the message goes through.  Why am I getting this error?

You can also try out few things >
1) check if the ipod constantly appears in mycomputer section .
- if it does try changing the drive letter of the ipod and try to format the ipod drive(Right click format)
2) if its not comin up in mycomputer then.. there has to be problem with the USB drivers in your computer
you can try
http://docs.info.apple.com/article.html?artnum=304508
The best way to check whether the ipod is faulty or the computer is creating the problem is,
connect the ipod to a different computer which has itunes on it(If possible)

Similar Messages

  • I have a 5s which has been working fine until about a week ago when any calender event added to my phone will not sync with my enterprise server. Any calender event entered on my PC (enterprise) does show on my phone. Mail is working fine both ways,ideas?

    i have a 5s which has been working fine until about a week ago when any calender event added to my phone will not sync with my enterprise server. Any calender event entered on my PC (enterprise) does show on my phone. Mail is working fine both ways,ideas?Iphne 5s and enterprise

    See my reply to this message:
    https://discussions.apple.com/thread/2557520?start=15&tstart=0
    The problem is that the POP3 client is not issuing a DELE command to remove the email from the server.

  • When i take a picture with my iphone and then forward the picture in an email (regardless of picture size) it will not send - any thoughts????? Thanks.

    When I take a picture with my iPhone and then forward the picture to an emaila ddress (regardless of picture size) it will not send the email with the pciture enclosed - any thoughts on how to fix ?????
    Thanks -

    The collum to the right listed similar problems.  The solution appears to be that under smtp outgoing settings the user name and password are listed as optional.  I have not plugged in the information and it seems to be working.  However from my office it always allowed the relaying.  The true test will be when I try to respond later from the road.
    Thank you for your help.

  • I am getting the error message "could not copy to requested location" to a drive i have been using for over a year... when I do the same thing to another drive - it works just fine. why?

    i am getting the error message "could not copy to requested location" to a drive i have been using for over a year... when I do the same thing to another drive - it works just fine. why?

    Possibly the drive is full
    Possibly the permissions are not set to WRITE permission
    Possibly there has been a "user mistake" and you think you are copying to a drive you have been using for over a year but something has accidentally changed and you're copying to a different location

  • I have updated to iOS8. Now cannot connect to BT speaker I have been using for months. BT discovers it but will not pair. Help please

    I have updated to iOS8. Now cannot connect to BT speaker that I have been using for months. BT discovers it but will not pair. I have tried switching both off & on but nothing helps.

    I am sure the BT speaker not the problem because it works fine with iOS8 on my iPad!
    ... And no I am not trying to connect both at once.  To be sure I have switched the iPad off completely and switched the speaker off & on but still with the same failure to pair.  The iPhone sees the speaker but then gives me the pairing unsuccessful message when asked to connect.

  • The wifi i have been using for months quit working yesterday. any ideas how to fix this?

    the wifi i have been using for months quit working yesterday. any ideas how to fix this?
    HELP!!!

    Is your Wi-Fi visible?
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    iOS: Troubleshooting Wi-Fi networks and connections
    Did you check your router?
    iOS: Recommended settings for Wi-Fi routers and access points

  • HT204266 I have been billed for an in app purchase I didn't make how do I get a refund please

    I have been billed for an in app purchase I didn't make how do I get a refund please

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Thunderbird will not allow me to use a group email I have been using for months, why and how do I do it please?

    I set up a group email for people that I send an email to at least once a month, I updated Thunderbird when the update came up and now when I have gone to send the email it has told me that it must be in the form of name@host, not my Groups name. How do I fix this problem without having to put each individual email address in each month

    This has been reported as [https://bugzilla.mozilla.org/show_bug.cgi?id=1060901 Bug #1060901]. If you have an account on Bugzilla, please consider voting for that issue.
    Several other people have sent in the same support request as you, noting this happened after they upgraded to version 31.1.
    The exact error message is: XXXX is not a valid e-mail address because it is not of the form user@host. You must correct it before sending the e-mail.
    '''This happens when your mailing list description includes several words separated by spaces.'''
    Although not ideal, these workarounds should let you use your mailing lists until a proper fix is implemented:
    * While composing an email open the address book and select the list you are trying to send to, highlight all the names in the list and drag them to the To: box. This uses your existing data without modifying it.
    * Replacing the blanks " " between the words in such lists' descriptions with an underscore "_". This requires modifying your mailing list(s) description(s).

  • Games I have been playing for months suddenly told me to update my Flash Player, but . . .

    A few days ago, games I have been successfully playing for months on Club Pogo suddenly tells me my Flash Player needs to be updated to the most current version.  But upon clicking the link and being brought to the Install Abobe Flash Player page, it tells me I already have the most current version for my operating system installed. 
    I've tired uninstalling and reinstalling it and I've checked for software updates for both Safari and Flash Player, but nothing seems to be working.
    I am quite frustrated and I have no idea what to do next.  Any help would be greatly appreciated.

    Nothing you can do; your OS version does not support any newer Flash Player versions.

  • My .mac email account stopped receiving messages about 4 hours ago; I can send successfully.  Is Apple having a "mail" problem, or do you have suggestions for me.  I have checked the setup and have also deleted and re-added the account.  Thank you

    Not working on Mac Air (Mountain Lion), iPad 3 (iOS6) or iPhone 4S(iOS6); was working until 4 hours ago.

    Install ClamXav and run a scan with that. It should pick up any trojans.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • I am unable to send to an address that I have been using for a long time. All aspects have been investigated but with no solution ,has anyone encountered this problem before?

    I am unable to send to an address that I have been using for a long time. All aspects have been investigated but with no solution ,has anyone encountered this problem before?

    Hi Eric,
    The message seems to totally disappear. It is going to an AOL customer in UK. I changed their address to start with a lowercase letter & the message was returned to me by AOL as undeliverable, I then changed the first letter of the address beck to upper case, the same I have been using for years, but again it disappeared.
    I appreciate any help you can give me. Tks Gord.

  • Hello i have been trying to install i tunes 10 on to my pc but as i get to the end of installation it comes up with the message windows installer package failed contact support or vendor how do i solve this im running vista of an acer laptop many thanks

    hello i have been trying to install i tunes 10 on to my pc but as i get to the end of installation it comes up with the message windows installer package failed contact support or vendor how do i solve this im running vista of an acer laptop many thanks

    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2.  But no matter what I do or try, it doesn't work.  What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

    I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2.  But no matter what I do or try, it doesn't work.  What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good.  Once I disconnect the Express, everything is good again.
    I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension.  Most of the time I get an error trying to update the Express.  But when it seems to be set up perfect, the entire house can't get to the internet.  Just when it looks right, it is so wrong.
    If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it.  I'm left to the conclusion that the Express is faulty.  I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

    I finally got it working.  I was trying to set it up ethernet.  My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode.  So everything I initially tried always resulted in 'wireless'.  Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it.  So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
    So here's the weird part.  When I finally tried 'continue' (vice manual), I would get 4 options.  One would be 'ethernet' extended.  So I would select it, it gave me green lights, all looked good, and still the same problem.  This is when I got frustrated.  I thought I had exhausted all possible combinations.
    But somehow when trying continue again after another restore, I only got 3 options.  One was the same ethernet extended option (can't remember what the missing 4th one was).  And this time it worked - it gave me the big green circle with the checkmark saying it was successful.  I don't know what I did different, but I know now that it won't work if 4 options come up to choose from.  It will work if only 3 options come up.  And success if only verified by the big checkmark.  Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
    As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it.  Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with.  It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
    Thanks for the response.  I really do appreciate it.
    Aiport Extreme Gen5 - internet access and router
    Airport Express Gen2 - connected via ethernet, extending my wireless
    - configured while connect directly to the Extreme, but now on a switch (16-port hub)
    Using Airport 5.6.1
    1) Restore Defaults from Base Station menu
    2) Following restart, Select Continue
    3) Of the 3 option presented, select 'ethernet.... extend network...'
      - if 4 options are present, may not work
    4) Wait for the green circle with the big white checkmark.
    5) Connected Express to the switch where a cable went to other end of house - works.
    Dead-zone went from 2mbps to 24mbps.
    I probably spent 4 hours chasing my tail in anger.  The correct way took about 5 minutes total.
    Thanks again.

  • HT4059 I purchased an iBook and when I try to download it I get sent in a circle. Message pops up that it's already been purchased & I need to go to store to download but it never downloads, stays in pause mode. I have been charged for the book but can't

    I purchased an iBook and when I try to download it I get sent in a circle. Message pops up that it's already been purchased & I need to go to store to download but it never downloads, stays in pause mode. I have been charged for the book but can't retrieve it. I've successfully purchased books before without trouble.very frustrated

    Hi Peggs,
    Try this:
    Open your iBooks app on your iPad
    Select the Store Button at the top
    Select Purchased at the bottom
    You will see your AppleID on the right at the bottom, then Redeem, then Support
    Click on your Apple ID, and when the AppleID window comes up with the options, Sign Out
    Then Sign In again and try redownloading your book
    Hope this helps!
    Cheers,
    GB

  • I was downloading some songs when I lost my internet connection. There is no sign that these songs reached my iTunes but i have been charged for these songs anyway. What should I do?

    I was downloading some songs when I lost my internet connection. There is no sign that these songs reached my iTunes but i have been charged for these songs anyway. What should I do?

    It's possible that the message you got was to update the AirPort Express Base Station's (AX) firmware...and that something might have gone wrong during the upgrade.
    Let's start by performing a "factory default" reset on the AX to get it back to it's original "out-of-the-box" condition.
    Then, let's set it up to work with your cable modem...
    AirPort Express Base Station Setup (AX) w/High-Speed Cable Modem
    Modem/Router Power ReCycling (optional)
    - Power-off the Cable modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
    - Power-on the Cable modem; Wait at least 30 minutes.
    - Power-on the AX; Wait at least 5 minutes.
    - Power-on the computer(s)
    Setup the AX
    With the network components powered down, set up the AX, using the AirPort Admin Utility, either connect to the AX's wireless network or connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
    AirPort tab
    - Base Station Name: <whatever you wish or use the default>
    - AirPort Network Name: <whatever you wish or use the default>
    - Create a closed network (unchecked)
    - Wireless Security: Not enabled
    - Channel: Automatic
    - Mode: 802.11b/g Compatible
    Internet tab
    - Connect Using: Ethernet
    - Configure: Using DHCP
    - WAN Ethernet Port: Automatic
    Network tab
    - Distribute IP addresses (checked)
    - Share a single IP address (using DHCP & NAT) (enabled)
    Do not, at this point, set up any security (i.e., WEP/WPA encryption, closed network, etc.) to first make sure the AX is operating properly. Try to access the Internet wirelessly with your MacBook. If you're successful, go ahead and add any security features you wish.

Maybe you are looking for