I have one query about table entries.
i have one query about table entries.
suppose for particular table we maintained 5 entries in dev server. actaully in the dev we have only these 5 entries.
In production we have 200 entries actually.
If we move the cts from dev to production ,we will get 205 entries right
please help me in this.
If i understood correctly, It is a Z table and you have done some changes in DEV system. If you move this to Production, it wont effect the production entries.
There are 2 different ways you can trnasport a Table. 1. with Table entries 2. Without table entries.
If you transport with Table entries then the DEV entries in this case 5 will be moved to PRODUCTION totaling 205.
If you transport without table entries, then in Production you will find only 200 entries.
Similar Messages
-
Query about calendar entries - Asha 311
Just purchased an Asha 311 and need some info. about the calendar entries that I made (a To-do list).
To the right of the entry there appears a gray-scale dot, which, when touched, turns green. The entry vanishes to the bottom of the list. Touch the green dot and the entry re-dates itself to two weeks after the original date and re-positions itself accordingly.
Please let me know the significance of this gray-turned-green icon and how I can prevent my calendar entries vanishing and re-positioning themselves to the wrong dates.
Thanks in advance.
CLYDEHi CLYDE1963,
Welcome to the Nokia Support Discussions!
This is a normal behavior of the phone. We suggest not to tap the gray-scale dot since it will notify you if you have already set the time and tone for it. If you will do it again, it means that the entry has been finished or has been done.
Hope this helps. -
can use exists instead of IN operator. or is there any optional to that query. please suggest me.
lakshman.Yes you can, but it doesn't means that you will have a better performance, it depends on where is the predicate of your query.
If the selective predicate is in the subquery, then use IN. If the selective predicate is in the parent query, then use EXISTS.
Best Regards -
Query about oldest entry in a Collection/List
Hi,
I need to access the oldest entry from a List. something on the lines of removeEldestEntry from LinkedHashMap ... but I need to work with the entry before deleting it. any hints or pointers will be greatly appreciatedA list is not nessasarly in the order that you put them in (see List.add( int, E ). If however you list is, see List.remove(int), and use element 0.
-
I have One Question about java security
In java.security file, there are many option...
(Ex) java.security
# Class to instantiate as the system Policy. This is the name of the class
# that will be used as the Policy object.
policy.provider=sun.security.provider.PolicyFile
but, I can't understand where "sun.security.provider.PolicyFile" class is located.
please, tell me where this class located, and How can I customized this PolicyFile<waving the magic wand>
abracadabra
</waving the magic wand>
check up the rt.jar file and u will c the classes.
have fun -
I hava one question about deployment
Hi friend
Can I deploy ejb by using command line,not deploytool?
How I can do this?
byeHai can you tell me how to deploy using deployment tool.First i want to know about how to create deploymentdescripter using/without using deployment wizard.I am using weblogic server6.1.
kindly help
srinivask -
Query about multiple connection pools under one database
Hi,
I have s query about connection pool, now we have a requirement,
we have two schemas in one db, some data store in one schema, some in another schema,
all tables are the same, but data is different, we want to retrive all data under two schemas,
so we need two connection pools under one database,
I have set two system DSN, and each connection pool was mapping to one DSN,
but after I importing tables into RPD, when I view data, there is a dialog let me select connection pool. so If this, when we drag columns in answer, it will definitely get wrong.
so how to realize this function about multiple connection pools under one database and we can get data normally.Hi,
Try this step
1)Better to create two different DSN for the same database with different user id and password
2)now create multiple connection pool in the same database in u r RPD physical layer .
also refer this link : for imporving performance
http://obiee101.blogspot.com/2009/01/obiee-multiple-connection-pools.html
http://gerardnico.com/wiki/dat/obiee/connection_pool
Thanks
Deva -
QUERYING TWO TABLE BUT not rquired 99% of the time
I have two tables EMPLOYEE AND DEPARTMENT.
Most of the time I require to query only employee table (99% of the time),but there are times when I have to
query department table to get details about department
select e.emp_id,e.emp_age,e.department_desc from employee e,department d where e.department_id = d.deparmemnt_id and e.department_id = 1;
The problem is 99% of the time I dont need the join,that is 99% of the time I jsut need select * from employee because department_id is almost most of the time greater than 1.Wondering how can write just one query that will do the trick.
Thanks
Mthis?
SQL> SELECT e.empno,e.ename,CASE WHEN e.DEPTNO=10 THEN
2 (SELECT d.dname FROM DEPT d WHERE d.DEPTNO=e.DEPTNO) END Depratment_name
3 FROM EMP e;
EMPNO ENAME DEPRATMENT_NAM
7369 SMITH
7499 ALLEN
7521 WARD
7566 JONES
7654 MARTIN
7698 BLAKE
7782 CLARK ACCOUNTING
7788 SCOTT
7839 KING ACCOUNTING
7844 TURNER
7876 ADAMS
7900 JAMES
7902 FORD
7934 MILLER ACCOUNTING
12 1
156 1
16 rows selected. -
Running a BEx report with more than one query in Background
I am having a workbook with 2 queries .This workbook needs to be executed at a particular time every day and then save this file to a application server location .
The file name has to dynamic, as everday a new file has to be created with some date stamp.
Please let me know the steps/ ideas to achieve thisSudhakar,
are you sure that it has to b a workbook ? running queries independently can be done .. am not sure if a workbook can be scheduled to run...
One alternative is to use APD - have the queries run and populate two ODS and then have these ODS in a multiprovider and have one query output for the same - seems to be a very longworkaround...
Another option is to have the queries executed in an ABAP programme and then have the results in an internal table and push both the result sets into an excel sheet ad save it in the application server.
For reading queries in ABAP there is a functionmodule for the same .. something like RSDRI_INFOPROV_READ .. I am not too sure of the name but there is a function module for sure..
Hope it helps..
Arun
Assign points if it helps.. -
Query in Table Maintanance Generator
Hi,
I have a query in table maintanance generator. In tables Extract and Total we have all the entries. Is it possible to get the entry which we made in the record. I mean i need the record in this i made the changes. I cant use above tqo tables because special characters are coming. Any body can suggest.
Regards,
MaheedharMaheedhar,
You will have to modify the program/code that was generated from the table maintenance generator to fit your requirements.
You can accomplish this by digging through the transport that you created, or by debugging through SM30 when you add a new entry or hit the save button. You should be able to find a place to add your custom logic.
Note: If you modify this code, anytime in the future if someone re-generates this table maintenance, your custom code will be over-written.
Thanks,
David -
Hi experts,
I have one query regarding search help. I have created a elementary search help which is having two fields.Now my requirement is that in the selection screen when I will enter any value in one field and i will press F4 in other field the list should contain only the values corresponding to the first field.
e.g.two fields comp code and name of company. When I will select the company code and press F4 in the second field the companies corresponding to the particular code should appear. Should I write a particular exit for that.
Experts please help me.
I will reward points accordingly.
Thanks in advance,
Abir.hi abir,
no neeed for that.
here i am fetching zones under a country.
so first user enters a country.
eg india.
then on the zone field f4 help, only the zones of india shulod come.
chk how i did it.
*& Form F_GET_ZONE_DESC
THIS SUB ROUTINE WILL FETCH THE ZONE DESCRIPTION
--> p1 F_GET_ZONE_DESC
<-- p2 F_GET_ZONE_DESC
FORM f_get_zone_desc .
CLEAR int_ret.
IF wf_country_code IS INITIAL.
*--MESSAGE IS 'Country Not Selected'.
MESSAGE s016(zm050).
ELSE.
*--THIS WILL FETCH THE ZONE CODES INTO THE INTERNAL TABLE'INT_ZONE_CODE'
*--WITH RESPECT TO A COUNTRY CODE.
SELECT zonecode zone_desc
FROM zmpets_zone
INTO TABLE int_zone_code
WHERE land1 = wf_country_code
AND loekz NE 'X'.
IF sy-subrc NE 0.
*MESSAGE IS 'No Zone Available In <COUNTRY_NAME>
MESSAGE s019(zm050) WITH wf_country_desc.
ELSE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
retfield = 'WF_ZONE_CODE'
PVALKEY = ' '
DYNPPROG = ' '
DYNPNR = ' '
DYNPROFIELD = ' '
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
value_org = 'S'
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
MARK_TAB =
IMPORTING
USER_RESET =
TABLES
value_tab = int_zone_code
FIELD_TAB =
return_tab = int_ret
DYNPFLD_MAPPING =
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE int_ret INDEX 1." INTO INT_RET.
wf_zone_code = int_ret-fieldval.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " F_GET_ZONE_DESC
rgds
anver
if helped mark points -
Query about licensing Jdeveloper
Dear Friends,
I have a query about licensing of Jdeveloper development tool. I understand that Jdeveloper is Free tool.That is we do not require license to use Jdeveloper for development as well as production.
Recent I heard that Jdeveloper is free only if we purchase Oracle Application Server. Is it correct ? Does one need to purchase Jdeveloper license if it is being deployed on any other App. server eg. Jboss etc ?
Can anyone throw light on the same ?
Many thanks,
VaijHi,
JDeveloper is free! Oracle ADF - the binding layer - ADF BC, and ADF Faces need an OracleAs licence
Frank -
About table display functionalities
Hi all,
I have to deal with one question about table display :
- I'd like to remove the orange color when we select a row. I tried to change the selectionChangeBehaviour properties but it only freeze the colored row to the first position.
Does someone has an idea?
Thank you.
RegardsHi,
If we set selectionMode property to none then it disables the lead selection. Try it once that whether it meets your requirement.
Regards,
Siva -
hi,
i have one query regarding one scenario which demands automatic deliver of mail to concerned person whenever there is no stock available for any material in the system..My interest is to notify the warehouse incharge about the status of items whether it is being totally utilised so that proper and immediate action could take place...As soon as the material Qty becomes zero,this should happen...Please guide me briefly for the same...
Thanks and Regards,
GauravGaurav,
Instead of starting the workflow and checking the start condition. If you can find a UserExit/Badi/Ench., use that to validate the stock and if it satisfies then go ahead and start the workflow.. If it only a mail to the concerned person, you can even send a mail using function modules(SO_NEW_DOCUMENT_SEND_API1 or similar one) .
Thanks,
Sudhir. -
I have one query below to tune.
Here one table USER_RETAILER_MAP and its column BELONGS_TO having value only 'Y' and 'N'.
Created bitmap index but i am not getting any cost difference.
Please share your idea ,how to tune and what process should follow.
SQL> explain plan for
2 SELECT a.user_id,
3 a.user_nm,
4 2 AS max_level
5 FROM gss_user a
6 WHERE a.user_id NOT IN (SELECT user_id
7 FROM user_retailer_map
8 WHERE retailer_id IN (SELECT b.retailer_id
9 FROM user_retailer_map b,
10 retailer c
11 WHERE
12 b.retailer_id = c.retailer_id
13 AND b.user_id = :a
14 AND c.status = 'ACTIVE'
15 AND b.managed_by = 'Y')
16 AND belongs_to = 'Y')
17 AND Upper(a.status) = 'ACTIVE'
18 AND a.user_id IN (SELECT user_id
19 FROM user_hierarchy
20 WHERE parent_user_id = :b)
21 AND a.gmac_dealer_user_flg = 'D'
22 ORDER BY Upper(user_nm) ASC
23 ;
Explained.
SQL> @utlxpls
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 1 | 91 | 65 |
| 1 | SORT ORDER BY | | 1 | 91 | 65 |
|* 2 | HASH JOIN ANTI | | 1 | 91 | 63 |
| 3 | NESTED LOOPS SEMI | | 7 | 504 | 9 |
|* 4 | TABLE ACCESS FULL | GSS_USER | 33 | 1254 | 9 |
|* 5 | INDEX UNIQUE SCAN | XPKGSS_USER_HIERARCHY | 7 | 238 | |
| 6 | VIEW | VW_NSO_1 | 212 | 4028 | 53 |
|* 7 | HASH JOIN | | 212 | 15476 | 53 |
|* 8 | HASH JOIN | | 15 | 675 | 9 |
| 9 | TABLE ACCESS BY INDEX ROWID| USER_RETAILER_MAP | 15 | 420 | 4 |
|* 10 | INDEX RANGE SCAN | INDX_USERID_MNGBY | 15 | | 1 |
|* 11 | INDEX FAST FULL SCAN | INDX_RETAILE | 1594 | 27098 | 4 |
|* 12 | TABLE ACCESS FULL | USER_RETAILER_MAP | 22885 | 625K| 43 |
Predicate Information (identified by operation id):
2 - access("A"."USER_ID"="VW_NSO_1"."$nso_col_1")
4 - filter(UPPER("A"."STATUS")='ACTIVE' AND "A"."GMAC_DEALER_USER_FLG"='D')
5 - access("A"."USER_ID"="USER_HIERARCHY"."USER_ID" AND "USER_HIERARCHY"."PARENT_USER
_ID"=:Z)
7 - access("USER_RETAILER_MAP"."RETAILER_ID"="B"."RETAILER_ID")
8 - access("B"."RETAILER_ID"="C"."RETAILER_ID")
10 - access("B"."USER_ID"=:Z AND "B"."MANAGED_BY"='Y')
11 - filter("C"."STATUS"='ACTIVE')
12 - filter("USER_RETAILER_MAP"."BELONGS_TO"='Y')
}How to post a SQL statement tuning request...
HOW TO: Post a SQL statement tuning request - template posting
Maybe you are looking for
-
Error message: There was a problem connecting to MobilMe. The request timed out.
I've never had an account with MobilMe. MobilMe is not listed as an account in iPhoto. All software on iMac is up to date. I'm running OSX 10.6.8. While working in iPhoto, editing or trying to upload photos to FaceBook from iPhoto I get the error
-
Disable auto sign in at start-up for Lync client 2013
Hi, I want to stop the Lync client from signing in automatically at start-up. Is there a way to do so? We are using Lync client 2013. Thanks in advance
-
Problem sharing iMovie project to theater
I'm trying to share an iMovie project to the theater on my computer, not to iCloud. Project is complete, I am not signed in to iCloud. After clicking on the correct project to select it, when I click on "Share" then select theater I get the annoying
-
I had a dozen photos to be used as clips in FCP7, the next day I re-opened the project but all the photos had dis-connected somehow, I re-connected them but all f the photos were softer. I re-loaded the photos which became doubles, and the re-loaded
-
Web template migration (3.5 - 7.0) & stylesheet is not found/used
Hey, we just made some web template migrations from 3.5 to 7.0. After the migration was done successfully, the migrated stylesheet link is not working anymore. This came apparent by opening the web template in the browser where the standard colours a