I have recently upgraded to 7.0.2 and can no longer charge my iphone 4 as i recieve the message this accessory may not be supported, any advice would be appreciated
i have recently upgraded to 7.0.2 and can no longer charge my iphone 4 as i recieve the message this accessory may not be supported, any advice would be appreciated
i have also tried 4 different chargers both official apple and non official
i have tried this but still not working i found a way of fixing it by restoring the phone but this has now put my phone in recovery mode and when i try to fix it i get an error 14 which i have no clue what it means
Similar Messages
-
For Christmas, my older sister got me a portable charger for my iPod. I'm not sure if it was capable with apple products, but it charged my iPod when I used it. My brother came upstairs and took my portable charger from me, so I went to go use my wall charger. The wall charger I have has always worked and it charges my mom's iPhone, so the problem I have isn't my charger. After I plugged my iPod in my charger, a message popped up saying "This accessory may not be supported". I was confused because this never has happened before, so I tried my portable charger after I got the message. The portable charger didn't charge my iPod anymore apparently after I tried my charger. All this happened the day after Christmas, so it's almost been a month without my iPod charging properly. My iPod does charge, but only when I plug it in halfway and am about to turn it all the way off. The only way I get it to charge is when I plug it in real fast as soon as I turn my iPod completely off. I've also restarted my iPod, cleaned out the charging area, asked people at stores that work with technology, and etc, so if someone could help me resolve this problem that would be legit because I use my iPod on a daily basis.
That message is usually due to a bad cable.
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
If you can’t charge your iPhone, iPad, or iPod touch
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
or send it in to Apple. See:
Service Answer Center - iPod -
Please lmk ASAP.
Does the charger actually chafe the phone?
I have same thing with one of mine I got from the market.
But as it still does the job I just ignore the alert
My stereo has a similar issue where it doesn't charge but still plays music so it suits me still
Hope that eases your mind. -
Hi all,
I have CC subscription, and have recently upgraded photoshop to CC 2014, how can I uninstall the OLD photoshop CC version?
Many thanks
MarkI usually keep my old versions until I'm certain I no longer need them.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Nancy O. -
I have recently purchased a new Logitech Webcam and can't seem to get it working on the site that I
I recently purchased a new Logitech Webcam and can't get it working on the site that I use. I can see myself on the small screen but can't get it to transmit to the person I am camming with. Can someone help me with this, it is very frustrating to say the least, I have tried everything I know how to do.
Thank YouI used to use Internet Explorer, but can't get on it now so I use Google Chrome.
Thank You: Donald Smith
Mike M <[email protected]> wrote:
Mike M http://forums.adobe.com/people/C+F+McBlob created the discussion
"Re: I have recently purchased a new Logitech Webcam and can't seem to get it working on the site that I"
To view the discussion, visit: http://forums.adobe.com/message/6318810#6318810 -
I am not computer savvy. I have a second generation itouch and have never had any problems with it until now. When I try to play certain songs, it will not play the song and skip to the next song selection. When I try to play certain videos, the message "This movie could not be played" appears. I contacted a tech spec who said it was possibly a format problem. How do i fix this?
This might sound weird, but here's an idea which worked for me re music that was newly added to itunes and showed up in my ipod but wouldn't play - I simply played the tracks in itunes first, just a second of time or so will do it, not the whole track, then connect the ipod and sync again and this time they played - hope this helps.
-
Since I upgraded to iTunes 10.7, I can no longer sync my iPhones nor my iPad.
For all devices, iTunes says "could not back up ... because a session could not be started".
I'm on w7x64, updated.
I have already tried to re-install, reboot, stop/restart Apple mobile devices service, without success.
Thanks!I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users. -
I just downloaded iTunes 9 and i do not want to upgrade any further, so when i plug in my iPhone iPhoto recognizes it as a iPhone/camera but iTunes does not recognize it. any help would be appreciated.
ThanksThank you so much. Guess i just have to upgrade now.
-
I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
Help!If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be. -
I Wish to connect my 6 year old Apple 20" Cinema Display to an orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm
The FireWire cable is just for the FireWire ports on the display. The display will run without it.
-
I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn
I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.
-
Hi. Unfortunately my ethernet card was not working anymore. This is the message "This computer does not appear to have any PCI Ethernet card. How can I fix it?
i would try an SMC reset, the following article tells how to do this:
http://support.apple.com/kb/HT3964
if it still gives that message, you need to take it to apple store or apple service provider to have a new card installed. the apple site gives listings of providers and stores in your area:
https://locate.apple.com -
Have version 6.1 on my iPhone5 and can't download videos to You Tube. Get error message Cannot publish. Help
update to the latest iOS version.
-
I am trying to pair my new mouse to my mac i get the message this device does not have the necessary
i am trying to pair my new magic mouse to my macbook pro and i get the message "this device does not have the necessary services".
Hi Barry
Thanks for the advice.
I have solved the problem by senting up a new bluetooth device.
Should have read the directions.
Many thanks
John -
I upgraded to PhotoShop CC 2014 and can no longer access my NIK Collection. It worked fine in PhotoShop CC? What can I do?
Contact Nik/Google for updated plugins that work in the new version of Photoshop.
Maybe you are looking for
-
Any hope for Powermac G4 400 mhz?
I have GB running on a Powermac G4 400 mhz and, not surprisingly, it gives me the "disk too slow" message after more than 3 or 4 tracks. Without investing too much $, is there any hope for upgrading this to a more workable solution for GB, or would I
-
How create plugins in java and access then from the app
How can I create plugins for a Java app. And how do I need in my app to access those plugins??
-
How do I reduce the size of page/script ?
There are no zoom in zoom out capabilities. No 100 or 125 or 150 settings on the lower right hand corner of screen.
-
Change the content in Benefits participation area
HI, In the benefits participation area under show benefits general links. There is some text. I want to change the text. I did not find the text in home page frame work service. How can I change the text to some other. Is it comes from Web Dynpro or
-
Physical change of oracle 9i DB to either oracle 9i or 10g.
Hi all, I want to change physical location of oracle 9i DB to either oracle 9i or oracle 10g. please do suggest the way to do it without data loss. thanks in advance.