I have some B/W video cameras(analog) are they supported by Labview

i have some B/W video cameras that I wanted to use with LabView but they are not in the list of supported cameras under LabView, but they are still very new and they work great and they are small and light weight which are two important things that I need. Can I still use these? Or should I look into buying some new ones? The website for these cameras is www.x10.com, model number SC21A, thanks.

Hi magnusrules,
The National Instruments Framegrabbers can adquire video formats like RS-170 or CCIR, it depends on the model of the framegrabber. Here is information about the analog video signals:
http://zone.ni.com/devzone/conceptd.nsf/webmain/0c19487aa97d229c8625685e00803830
I saw the datasheet, but I did not find the type of signal. It says RCA, so maybe this can be of some help:
http://digital.ni.com/public.nsf/websearch/A247A92A91FDEFAE86256BA50051F28B?OpenDocument
http://sine.ni.com/nips/cds/view/p/lang/es/nid/11356
Since the camera has a RCA connector, and it's BW, it could be RS-170, but we need to confirm it with the manufacturer.
Tania Lozoya

Similar Messages

Macbook pro fails to read sd card with movies recorded on it, any ideas? I can view them in the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it.

My macbook pro is failing to read a new sd card with movies recorded on it. Any ideas please? A previously used SD card has downloaded without problems. I have tried using a card reader as well as downloading from the video camera itself, neither works.
I can view the latest recordings on the video camera so know they are there somewhere. I am now thinking I should have formatted or initialised the new card before using it but didn't think of that at the time. Obviously don't want to do this now as it will wipe the movies.

Hi and Welcome to the Forums!
From everything you've described, you've done everything possible. Hence, I recommend you seek out your warranty support.
Good luck and let us know.
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I found out that I have some lost contacts on my iphone 5s, they dont appear when I search but if the contact calls me I see their name. How can I get those contacts to be on the list?

I found out that I have some lost contacts on my iphone 5s, they dont appear when I search but if the contact calls me I see their name. How can I get those contacts to be on the list?

You could check settings > mail contacts and calandars and see if there are any accounts (like icloud gmail yahoo) listed and if they have contacts on. Its possible if contacts were synced to one of these accounts that turning them back on will recover the missing contacts.

After i updated my firefox from 3.16 to 4.0.1, have some websites i can't load, and they showed: " database error" but b4 i never got this problem. Can someone tell me why ?

after i updated my firefox from 3.16 to 4.0.1, have some websites i can't load, and they showed: " database error" but b4 i never got this problem. Can someone tell me why ?

Nothing is working and I can't find the Roboform toolbar. Your lack of direct support is really irritating- a live chat at least would be helpful.

We have some 3rd generations iPod touches that are note syncing with the computer we have. The original computer that the ipods was synced to is gone. We downloaded the itunes to the new computer and logged on as the same account and it won't sync.

We have some 3rd generations iPod touches that are note syncing with the computer we have. The original computer that the ipods was synced to is gone. We downloaded the itunes to the new computer and logged on as the same account and it won't sync the applications we have.

An iPod can pn;y sync wiht one iTunes kibrary and the new computer is a new iTunes library:
- Transfer iTunes purchases to the computer by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- Transfer other music by using a third-party probgram like one of those dicussed here:
Copy music from Ipod to new computer...: Apple Support Communities
- Connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup

When I import video clips, why are they only recognized as audio clip? [was:Question]

When I import video clips, why are they only recognized as audio clip?

Please do not post the same question twice http://forums.adobe.com/thread/1450571?tstart=0
If you are using Premiere Pro, you need http://forums.adobe.com/community/premiere?view=discussions
If Premiere Elements, you need http://forums.adobe.com/community/premiere_elements?view=discussions
If some other program, post the name of the program

TS2755 i have no messages in my phone but my storage is 90% full and in my usage it says i have 12MG in messages (saved) but i dont have any messages in my phone - where are they saved ? how can i delete them? please help

i have no messages in my phone but my storage is 90% full and in my usage it says i have 12MG in messages (saved) but i dont have any messages in my phone - where are they saved ? how can i delete them? please help

pamalushka54,
We want to make sure that we get your phone up and running. Can you look to see where you have the most stuff stored at. Settings>General>Usage>Storage.
This will tell you what exactly is using everything. Then you can delete things from there.
RobinD_VZWSupport
Follow us on twitter @VZWSupport

I have an old JVC video camera and wish to import videos however the driver only supports windows.

I have an old JVC digital camera and am trying to upload videos on to my Macbook pro. However the device is not recognised and the drivers only support windows.

I have an old JVC camera, i would like to transfer the video which is on mini DV cassette
It would help if you give us the exact model JVC camcorder you have.
That said, nearly all miniDV camcorders (including JVC miniDV cams) transfer video via Firewire (aka iLink or IEEE 1394), not USB. And no drivers are required, at least not on a Mac. If you have a more recent Mac that has a Thunderbolt port (no Firewire port), you can use an Apple Thunderbolt-Firewire adapter to connect your camcorder to your Mac (although you may also need a 4-pin to 9-pin FW cable).
Also, on miniDV camcorders that have both Firewire and USB connections, the USB connection is almost exclusively reserved for transferring still photos from the memory card in the camcorder, not video from the miniDV cassettes.

I have some software problems of running matlab script node in the LabVIEW program.

Hi there,
I wrote a simple matlab code, like x= 1, y = x*2. Then I tried to put them into matlab script node in LabVIEW.
However, when I ran the program, I couldn't run and Labiew show some error.
Then I tried the method talked before on this forum. Please see the following link.
http://forums.ni.com/ni/board/message?board.id=MathScript&thread.id=571
I followed the instruction and open the "command prompt," type some commands then I could run the program, and simultaneously, the LabVIEW program open "Matlab command line window" and run my labview code. However, if I didn't use the command prompt, the "matlab command window" will not be opened by running the labview program. It would just show some error. And even if I turn on the matlab program in advance, I still couldn't run the labview program.
Is there any effecient way to deal with this problem without using "command prompt?" Because I try another PC with both matlab and labview installed on it, I "can" run my simple matlab script node on it, and it will open the matlab command line window automatically by running my code. Therefore, I thought there might be some software linking problems in the previous PC I used . Do you have any ideas?
Thanks in advacne.

This board is for Mathscript, but you seem to have a matlab problem. You should probably post in the LabVIEW forum instead.
What is your LabVIEW version? What is you matlab version?
LabVIEW Champion . Do more with less code and in less time .

Lost email plus some folders after recovery. Where are they?

I had to do a system software recovery. The screen said it would not erase data files. However; afterwards, some of my data folders are now missing. As well as ALL my email.
I suspect that the files and folders are still on my computer because my drive has about the same amount of free space available. The question is; where would those files be? Are they hidden under my old user name? I used the default user name each time which is HP_Administrator. Would that mean that the old user account got deleted with the new?
system:
HP Pavilion Media Center TV m7334n Desktop PC
Windows xp
*recovery files are kept on drive D:
****updated question ****
Can windows xp user accounts get corrupted? If so, is the data for those accounts also corrupted? And could it possible be retrieved? And how?

Thanks. I searched drive C:, the only *.dbx files it found are the new ones just created.
Again, some of my data folders (some, not all) was deleted. But my free disk space is about the same. Leading me to believe my data is not gone, just hidden somewhere on drive C:, but where?

I Have an iPad 2 that is not sinced to anything and I don't use iTunes or icloud. I have only taken pictures using camera app. I have successfully deleted all pictures in the app, but my settings show 94 photos and 3 videos. Where are they?

why is my iPad showing that I have 94 pictures and 3 videos when my camera app shows zero? How do I locate the items the settings is indicating I have on the device? I have never sinced, I don't have any iTunes, and I don't use icloud.....

Thanks so much! My grandaughters played games on the iPad over Xmas and one of their moms said shed restricted their access! Guess they forgot to enable again. Thank you again! Karla

I have jvc gy-hm100 video cam.I would like to know which format is best for final cut pro?

My camera has a every size of resoloution. From 1080-60/30 to 720-24.It is totally compatiable with FCP.What i would like to know is what format is recomended for music video's and film production.Any info is greatly apprec!!!! Thank you!
P.S. Ive been producing music for 15 years.Recording on Logic plat.Mastering and remixing every thing. I love mac!!! Now going into video i want to be just Pro with it as i have been with my music.I purchased the jvc because Mac Recomended it and how it plugs right in. FCP 7 is intense!

All the available formats are "OK" for FCP7, the more important question is what's good for the movies you want to make?
In my limited experience, music videos tend to favor 24p for it's "film-like" qualities. The 1080 vs. 720 decision is frequently based on intended use; if you're going to release on the web, 720 is fine and brings much less filesize and overhead to the edit.
My personal preference is towards high-bandwidth footage like the 35Mbps HQ Mode your camera offers because it behaves so nicely in Color. Many people advise staying away from interlaced (HDV) footage unless you totally need it for action scenes.
I think the last 4-5 music videos I've done were all 720p24 and were web released.
Hope this helps...

I have a panasonci hd video camera what cable do i need to hook up to my iMac desktop

I have a panasonic hd camera what cable do I need to hook up to my mac desktop

It depends on what Mac you have and what version of iMovie. You may need to use Firewire.
iMovie 11 - cameras supported:
http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
iMovie 9 - cameras supported:
http://support.apple.com/kb/HT3290?viewlocale=en_US
iMovie 8 Camcorders supported:
http://support.apple.com/kb/HT1014
Digital camera RAW formats supported by OS X Lion:
http://support.apple.com/kb/HT4757?viewlocale=en_US
Digital camera RAW formats supported by OS X Snow Leopard:
http://support.apple.com/kb/HT3825?viewlocale=en_US

HT1338 I have an imac with Mac OS X version 10.5.8. I have bought a Sony video camera which requires 10.6 or later. How do I upgrade?

I have an imac with OS x version 10.5.8
How do I upgrade?

I don't know.
What Mac do you have?
How much RAM does it have?
How much free disk space does it have?
Allan

My mcbook is not conecting to internet. I have some conection in Utorrent but pages are not being displayed in my browsers (chrome and firefox). If I reset the SMC i can get results from google but no other page loads. i get ERR_NAME_NOT_RESOLVED.

My Mcbook cant find the host. I get some conection because my Utorrent has some donwload activity, but when I attempt to open any page i just get a time out and ERR_NAME_NOT_RESOLVED. If i reset the SMC by removing the battery, google loads perfectly and it gives me search results without any problem. But when I click on any link, or attempt to enter a direct URL it gives me the error mentioned before.
I restarted the modem, changed the DNS, deactivate the firewall, conect the macbook via ethernet, change the IP, and nothing seems to work. This issue happened the first time i tried to conect to internet in a different country. Internet works fine in any other laptop or mobile device.
When using the assistant to run a diagnosis on the network, i get the first 4 items (wifi, wifi adjustments, network adjustments and internet provider) with a green light, and the other two (internet and server) with yelow lights (sometmes red light).
When i tried to connect the first time, i had a OS X 6.8 but i upgraded it to Maverick 10.9, since i had already donwnloaded it, and the result was the same.
anyone could help me please?

We usually advice first to Reload web page(s) and bypass the cache in case of such problem and then do a check for extensions to see if any are causing the problem.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Other possible causes can be zooming a page or having increased the minimum font size.
*http://kb.mozillazine.org/Websites_look_wrong

I have some B/W video cameras(analog) are they supported by Labview

Similar Messages

Maybe you are looking for