I have submitted build by xcode 6.1 but in itunes account shows us Apps and app updates submitted to the App Store must be built with Xcode 5.1.1 or later, and iOS 7 or later SDK after clicking the submit for review.

I have submitted build by xcode 6.1 but in itunes account shows us Apps and app updates submitted to the App Store must be built with Xcode 5.1.1 or later, and iOS 7 or later SDK after clicking the submit for review.
Please tell me the solution as soon as possible and i am able to remove the build.

You have used Xcode 6.1 and it is a valid version, so you should not have any problem. Anyway, if there is any problem, Apple will contact with you to fix it before your app is published.

Similar Messages

  • Apps and app updates submitted to the App Store must be built with Xcode 5.1.1 or later, and iOS 7 or later SDK.

    Hi Guys,
    i am receiving this error since last 3 days please help me resolve this.
    i am already using XCode 5.1.1 and iOS 7 SDK i have regenerated my app store provisioning profile twice after this issue.
    my app gets validated by Xcode and also gets uploaded successfully through Application Loader (i.e. latest one 2.9.1 i believe)
    but in itunes connect when i try to submit my app for review i receive this error.
    "Apps and app updates submitted to the App Store must be built with Xcode 5.1.1 or later, and iOS 7 or later SDK."

    I'm getting the same error as well, using Xcode 6.1 (6A1042b) on OSX 10.9.5.  My project settings in Xcode have “Deployment Target” as “7.0” and “Base SDK” as “Latest iOS (iOS 8.1)”.  I uploaded the app via Xcode, not with the application loader and I've tried re-generating my distribution provisioning profile.
    This is an update to an existing app which was previously built against iOS 6.0 sdk but all attempts to submit the update now produce the error message "Apps and app updates submitted to the App Store must be built with Xcode 5.1.1 or later, and iOS 7 or later SDK."

  • App Store must be built with Xcode 5.1.1 or later !

    I just upload a new binary to one of my apps to iTunes but I got the following error when I submit for review:
    Apps and app updates submitted to the App Store must be built with Xcode 5.1.1 or later, and iOS 7 SDK.

    This is the STATUS HISTORY of my app in iTunes Conect:
    September 09, 2014 17:45
    Waiting For Review
    September 09, 2014 17:21
    Prepare for Upload
    September 09, 2014 15:33
    Invalid Binary
    September 09, 2014 12:58
    Waiting For Review
    September 09, 2014 12:09   
    Prepare for Upload

  • Starting February 1, new apps and app updates submitted to the App Store must be built with Xcode 5

    Apple send out this message:
    "Starting February 1, new apps and app updates submitted to the App Store must be built with Xcode 5 and iOS 7 SDK. Learn more about building apps for iOS 7."
    A few questions about this to Adobe:
    - Which AIR SDK version is prepared for this ?
    - Do we need to recompile all ANE's ?
    Cheers.

    Hi All,
    The issue has been fixed and the build 4.0.0.1619 is available at
    http://labsdownload.adobe.com/pub/labs/flashruntimes/air/air4-0_sdk_mac.tbz2 for mac and http://labsdownload.adobe.com/pub/labs/flashruntimes/air/air4-0_sdk_win.zip for window. Please let us know if you will face any issues.
    Regards,
    Nimit

  • New apps and app updates submitted to the App Store must be built with Xcode 5

    I just received an email from Apple Developer saying that:
    "Starting February 1, new apps and app updates submitted to the App Store must be built with Xcode 5 and iOS 7 SDK."
    Does anyone has any idea how will this impact on those who build iOS apps using Flash cc?

    Hi All,
    The issue has been fixed and the build 4.0.0.1619 is available at
    http://labsdownload.adobe.com/pub/labs/flashruntimes/air/air4-0_sdk_mac.tbz2 for mac and http://labsdownload.adobe.com/pub/labs/flashruntimes/air/air4-0_sdk_win.zip for window. Please let us know if you will face any issues.
    Regards,
    Nimit

  • This bundle is invalid - New apps and app updates submitted to the App Store must be built with public (GM) versions of Xcode 5.1.1 or higher and iOS 7 SDK. Do not submit apps built with beta software

    Does anyone can help me on this issue from Apple Developer?
    This bundle is invalid - New apps and app updates submitted to the App Store must be built with public (GM) versions of Xcode 5.1.1 or higher and iOS 7 SDK. Do not submit apps built with beta software
    Is there a new Flash CC - Adobe AIR SDK to solve this?
    Best

    Looks like there's some hope:
    Re: App Store must be built with Xcode 5.1.1 or later !

  • ERROR ITMS-9000:"This bundle is invalid. New apps and app updates submitted to the App Store must be built with public (GM) versions of Xcode 5.1.1

    I submitted my IPA file to Itunes Connect using Application Loader and got the error message below. I have AIR SDK 13.0.0.111 and using Flash Builder 4.6.
    Please help. Thank you in advance.
    ERROR ITMS-9000: "This bundle is invalid. New apps and app updates submitted to the App Store must be built with public (GM) versions of Xcode 5.1.1 or higher and IOS 7 SDK. Do not submit apps built with beta software." ...

    Hi!
    I'm also using Air SDK 15 and I'm getting  Invalid Bundle Error:
    Adobe Air iOS Invalid Bundle
    The bundle does not support the minimum version os specified in info.plisthttp://stackoverflow.com/questions/26047837/adobe-air-ios-invalid-bundle-the-bundle-does-n ot-support-the-minimum-version-os
    Really need help
    Michael

  • IOS app Validate : Error bundle is invalid.New apps and app updates submitted to the app store must be built with public?

    I am using Xcode 5.1 with SDK 7.1
    I tried to validate  new version in appstore.But its failed.Error message:"Bundle is invalid.New apps and app updates submitted to the app store must be built with public?"
    On Apirl 18  ,I can submit last version

    It would help if you posted your problem in the form of a question.
    What version of Xcode are you using?

  • IOS app submission bundle is invalid.New apps and app updates submitted to the app store must be built with public?

    Hi,
    I am using Xcode 4.6 with SDK 6.0. I tried to upload new binary in appstore.But its failed.Error message:"Bundle is invalid.New apps and app updates submitted to the app store must be built with public?"

    Hi,
    I'm using xcode 5.1, sdk 7.1 target 7.1 and still have the issue.
    It is an update of an app built 2 years ago.
    thanks
    Jozo
    can the problem be deprecations (in app purchase code)?

  • This bundle is invalid new apps and app updates submitted to the app store must be built with public

    this bundle is invalid new apps and app updates submitted to the app store must be built with public

    It would help if you posted your problem in the form of a question.
    What version of Xcode are you using?

  • I have no video on my iPhone 5 but in iTunes is shows video is taking up 3.8mb

    I have no video on my iPhone 5 but in iTunes is shows video is taking up 3.8mb

    Also try:
    1. Resetting the SMC > Resetting the System Management Controller
    2. Resetting the PRAM > Resetting your Mac's PRAM and NVRAM
    Then perhaps while you have it off and disconnected from the power, give the output jack a quick shot of electronic cleaner, then run a jack plug in and out a few times and follow up with a short blast of dry air.
    Message was edited by: den.thed
    Didn't see your 9:49pm reply until after I posted.
    Hey that's great... Your welcome!

  • Nothing happens after clicking on submit for wifi password

    i am trying to set up apple tv.....entering password for wifi...i clicked on the submit button,  apple tv blinked once, but nothing has happened...

    Hi there vashongirl,
    You may find the troubleshooting steps in the article below helpful.
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS4546
    -Griff W. 

  • I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7. Please confirm. iPhone

    I have installed iOS7 on my iPhone4. I am able to add/edit contacts by clicking the "contact" icon. But when I am trying to do the same after clicking the "phone" icon, it is not displaying the keypad. I believe it is a bug in iOS7.
    Please confirm.
    iPhone 4, iOS 7

    Hello jayanand,
    You may need to force close all open apps, then restart the phone. If necessary, you may need to reset the phone after that.
    iOS: Force an app to close
    http://support.apple.com/kb/HT5137
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Cheers,
    Allen

  • After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2.  After clicking the download button, the screen just turns dark and is frozen.  Any idea what is happening?

    After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2.  After clicking the download button, the screen just turns dark and is frozen.  Any idea what is happening?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Plugin: Seems to be a basic screen and a more elaborate one after clicking the adobe logo...

    I use Adobe Acrobat 8.1.  I prefer to use the version 11 reader plugin.  There are two differing "screens".  1. comes up with the document and when you hover the mouse at the center bottom third of the screen, a dialogue appears allowing basic operations.  Clicking on the logo brings up a second screen which is more elaborate..  I would love to know what these screens are called in AdobeSpeak... Now...
    After setting the adobe acrobat 8.1 as the system default, the reader plugin in chrome is still version 11.0.05.3 per the plugin section, however where before there were two screens available, the second screen appears and there seems no way to set it to the first simplier one.  No toggle to go back to it.
    I am pretty certain that the plugin is not the one from 8.1.
    I went into the general preferences and set the default to the adobe reader 11 and this gave me the simple first screen, once again.  For acrobat 8, I used folder options to make it the system default for .pdf files.  I use several programs that rely on the default system pdf program, 8.1 my choice, so this is important to me.
    So I guess the relevant question is how, if I only see the more intricate second screen in google chrome, can I set it up so that the simple one with the hovering tool bar is available and not the more elaborate one that come up after clicking the Adobe Logo at the far right of the hovering tool bar?

    ...This is the hovering tool bar.  click the adobe icon on the right side and
    you get this...
    click the diagonal double arrow head and you return.
    However when 8.1 installs, the plugin says that its 11.0.05.3 but the
    plugin which looks a lot like the the directly above is not exactly the same.
    It is not 8.1 plugin, for sure.  The plugin list says its the 11.0.05.3  and its
    not the chrome version.  There is no hovering tool bar when the doc first comes
    up.  The question is how to revert a setup to be like the top two pics without
    having the reader take over the default of the system through the preference
    -> general option.
    This is not that important.  It just seems like the two photos above are
    replaced by... a third which has sign in, tools and comment at the bottom of the
    screen.  A might strange.

Maybe you are looking for