I HAVE THE 2011 MACBOOK PRO AND SINCE I HAVE UPGRADED TO LION MY LAPTOP IS RUNNING HOT. ANY SOLUTIONS?
DOES ANYONE ELSE HAVE THE SAME ISSUE? SINCE INSTALLING LION MY MACBOOK PRO IS BEEN RUNNING MUCH HOTTER. I HAVE DOWNLOADED THE FAN SMC FAN CONTROL TO ASSIST BUT THIS IS ANNOYING? WHEN IS TO HOT TO HOT?
Check this thread: https://discussions.apple.com/message/15882483#15882483
Read the whole thing, because there are some updates near the end. Also, I'll be adding more to it a little later tonight or tomorrow.
Similar Messages
-
I have Late 2011 Macbook Pro and zxcv keys are not working?
I have late 2011 Macbook Pro and the zxcv keys are no longer working. Once I connect USB keyboard I can utilize these keys. Do anyone have solution?
How did you try to use Acitivty Monitor?
Open Activity Monitor, choose "All processes" from the list, and sort processes by CPU usage. More likely than not, there will be task using up good bit of CPU.
You could also try resetting SMC:
http://support.apple.com/kb/HT3964 -
I am looking at a hard copy of Final Cut Pro X online that says it is version 10.0.8 I have the latest macbook Pro and I am wondering if that software is compatible with my laptop? Do Hard Copies of Pro X even exist? Is it stupid to try and buy this?
Online where exactly? Post a URL. The application is only legally available for purchase as a direct download from the App Store. Or are you talking about the trial version?
-
I have a 2011 MacBook Pro and the battery has died what kind of battery do I need?
What kind or battery does my late model 2011 MacBook Pro need?
The one that your Apple Store or your Apple Authorized Service Provider will install. MBPs from 2010 on forward do not come with user-replaceable batteries and special tools are needed to remove the one within. Plus whatever one you get outside of the official channel will cost the same if new, so there is no sense in going solo on this.
-
Please help me out I really don't like the Mountain Lion software, the old one i had was much better and I can't seem to figure out how to get back to the one I use to have.
if you plan on doing an internet recovery install of your old os which is Lion - keep in mind that everything will be erased in your hard drive. your files are gone - unless you have made copies of them in another drive.
you will have to reinstall everything over again. if you're prepared to do that, then click on the link below to learn on how to start internet recovery since booting through your recovery partition will reinstall Mountaln Lion.
Force Lion to Start Internet Recovery.
Now, if you have a early 2011 Macbook Pro - then it came with Snow Leopard - use your install disk to reinstall. -
I tried googling several solutions, but so far nothing seems to work. Everytime i start up my laptop i press CMND+R to make it go to the repair disk utility but instead it takes me as if i have to install lion when i had Snow Leopard 10.6.8. When i do go to the repair disk utility, on the eft hand side shows two hardrives one is Untitled and another is Hitachi, i tried downloading snow leopard 10.6.8 onto a Re-writable disc using my windows computer. When i insterted it onto the disc drive it came out under SUPER DRIVE and everytime i double click on the CD it says something about attaching images/ I also forgot to mention that the MAC OSX 10.6.8 Update shows on the left hand side on the bottom in DMG format. I dont know what else to do, please help?
DestroyGalaxies wrote:
a flashing folder came on with a question mark in the middle of it
This is the firmware telling you it can't find a bootable OS X volume.
Usually to solve this all you do is hold the option key down on the built in keyboard while booting the computer, this enters Startup Manager and then you choose OS X to boot, then in System Preferences > Startup Disk you change it to the boot volume and it tells the firmware.
Everytime i start up my laptop i press CMND+R to make it go to the repair disk utility but instead it takes me as if i have to install lion when i had Snow Leopard 10.6.8.
What you have is a 10.7 or 10.8 Recovery HD from when 10.7 or 10. was on the machine previously.
The Macintosh HD partition only was erased and 10.6 installed on it, without erasing the entire drive like what should have occured to remove the Recovery HD partition.
So you have a mucked up machine.
i tried downloading snow leopard 10.6.8 onto a Re-writable disc using my windows computer.
Well there goes your problem there, your downloading illegal copies of Snow Leopard from a untrusted location.
10.6 is not available for download, except from pirate sites. You likely have malware or a compromised system.
I dont know what else to do, please help?
What you need to do is call Apple via phone, tell them the make of your machine and order the appropriate 10.6 disks, they are inexpensive now. Some machines that came with 10.6.3+ origianlly need machine specific disks, other wise pre-10.6.3 Intel Macs can use the 10.6.3 white retail disks.
Once you have the disks, you need to backup your personal information off the computer to a external storage drive using the emergency quick copy method, then disconnect it to prevent mistakes.
Most commonly used backup methods
Next follow this proceedure and make sure to select the ENTIRE drive on the far left with the drive makers name and size, this will erase the entire drive, then install 10.6 from the disk
How to erase and install Snow Leopard 10.6
When finished setup the machine and log onto the Internet and use Software Update to get current on 10.6.8
Don't use pirated software, it's likely been compromised in some fashion. -
I wake the computer from sleep and then it freezes either within 5 minutes or it could take an hour.
Try to repair disc permissions. Also see if MSOffice is compatible with Lion.
-
Can somebody please help me with this problem. Thanks.
Try resetting the SMC
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC. -
I have the new MacBook Pro from late 2011. "the one before the new ritina display" i have a cannon gl2 video camera which is mini dv. when i plug it into my mac via firwire 800 it does not show up in the iMovie. i have set the settings on the camera to vcr mode and changed it to av->dv out. when i click on the import from camera on imovie it doesnt even show my camera in it. it just gives me the option to import video from my facetime camera. the camera is turned on the wires are connected i know for fact that its a firewire and not a usb. i know what they each look like. i bought the firewire cable and it was marked down cause it was an opened and used item. would it be possible that it could be deffected and if that is not the reason what other options do i have?
I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
I would suggest trying a different firewire cable.
You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
Here is a link.
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
Other things to check:
Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import. -
I just verified that i have an early 2011 Macbook Pro and the airplay icon does not appear. i also have a 2013 Macbook Pro which shows the airplay icon. do i need to enable airplay on my early 2011 or is there an update that is needed? Confused.
To check your model go to About This Mac (by clicking on the Apple icon, top left) and then select more info. If you wish to use mirroring you will need one from 2011 or later running OSX 10.8 or later. The alternative would be to use 3rd party software like Airparrot.
About AirPlay Mirroring in OS X -
I just got the new macbook pro about 2 weeks ago, it has lion. When the new mountain lion comes this summer, can i just update it on my macbook pro since it isn't so old? And if i can update it, do i have to pay, or is it a free update?
I'm in the same position, the store said they didn't know of any new release, so i bought my macbook pro to find out about mountain lion. I really hope that i'm not going to pay for the upgrade. New to apple, also last month bought my Ipad 3, really thought that Airplay would have been on my book pro, nope, waste of time.........need that update to use it. Back i the box then, get the windows 7 ultimate pro back out until then.
-
i have a late 2011 macbook pro and i don't have the airplay icon on my menu. Everything is on the same network and i have a black mini apple Tv. it is either 2nd or 3rd generation. The airplay icon comes up in itunes it doesn't works with video just music. I want to mirror it on my apple tv. Will you please help me?
That's why, you will need to upgrade to 10.8
-
I hAVE A 2011 macbook pro, i've noticed that hardrive usage from 180 gig went up slowly to 260 gig after several months, and i didn't even install any software or saved anything at all that big? Why is that? Is it becasue of the many software updates that Apple sends? I already checked my files but i don't find anything that would cause that much of a big jump.
Hey hippie, this should help you figure out where your disk space is going http://pondini.org/OSX/DiskSpace.html
-
since upgrading phone to iOS 5. I have an old macbook pro and it is running snow leopard OS 10.6.8. I have a minimum of 40 recurring events per week, several of which change. I use the information to schedule future appointments based on those changes and it's causeing a major problem to not have the changes sync. Any help would be very much appreciated.
Did you try to replace the calendar info on the phone with the one on your Mac? You can find this option in iTunes/Info pane, Advanced section.
-
I recently updated? to Lion from 10.6.8(snow leopard), and things seem to be running slower. Has anyone had similar problems? I have Feb 2011 Macbook pro 13" 2.3 Ghz.
As Shootist pointed out, the system uses more power.
However, initially it will reindex the hard drive for spotlight, which will slow things down temporarily.
It also must rebuild caches that eventually will speed things up.
If it has completed indexing the hard drive (no dot pulsing in the spyglass), then there might be something wrong.
Start by booting into the Recovery HD (a partition created with Lion that has Disk Utility and reinstallation options) by holding down cmd-r when you restart. You can let go when the gray screen appears.
When it boots, select Disk Utility and Repair the drive.
If that doesn't speed things up, try re-installing the OS from the same Recovery HD. It won't delete any of your files, but it has helped some people whose Macs ran slow after installing Lion.
Also, how much memory do you have? Lion needs RAM so maxing your Mac out might also help.
Maybe you are looking for
-
Tool icons, navigation, elements need to be larger for those that want it
I have read through many forums from May 2012 right up through the current ones about this issue. There are a lot of Photoshop users who are complaining about the size of tool icons and other elements as being way too small. Then there are others who
-
Can't Debug Cloud Service w/Visual Studio
I have used the instructions on the following link to no avail. Trying to debug a web application. http://msdn.microsoft.com/en-us/library/ff683670.aspx#BK_Debugging_Cloud_Azure I am using SDK version 2.3 with Visual Studio 2013 Ultimate. Yes, remot
-
How to check GL & RG patchset level.
Hi, How to check GL & RG patchset level? Any script ? thanks
-
Nikon D2X - DNG vs NEF White Balance Mismatch
Folks, I was hoping someone might be able to help me with a frustrating White Balance issue. Specifically, I have found that my photos often have very different White Balance values -- for both Color Temperature as well as Tint -- when comparing the
-
Changing the background image?
If I associate a UIImageView that is being used for the background image in my view, In the header file: IBOutlet UIImageView *theBackground; @property (nonatomic, copy) UIImageView *theBackground; and @synthesize it, in the implementation file: @syn