I have the BOR object selfitem not delegated to any subtype

i use the above one in a task
if i create a new subtype,delegate it to this and use it an another task does it effect the first one.

Hii Kittu,
Let me add few words about delegate.
Once u make a subtype of a standard BO and make it a delegate type, It actually carries all the properties(Methods,Attribute, Events..) of standard BO(or what ever u have made as object type in delegation).
Now may be u r using ur Standard BO at some where.[As per ur query]
So when u make changes in the z-object, this will be reflected in the standard one, thats what is the delegation all about...
But, but but , You can not change the existing (rather enherited properties) of standard BO.
So add properties in z-object as per ur requirementas per ur requirement.
Now once u use it, it will not affect the older ones...
Hope it helps u...
<b>"Dont forget to reward points"</b>
Regards,
Ashish

Similar Messages

[Solved] The requested object does not exist. (Exception from HRESULT: 0x80010114)

I have a 8 node cluster with Hyper-V, which will be 10 nodes when it's finally done.
Recently I've been try to add nodes and though that went fine, after about a week I could not open the Failover Cluster Manager anymore.
After some checking I found out that the latest added node was giving problems.
VM's on the node still run and function properly, but most Powershell commands result in a "The requested object does not exist. (Exception from HRESULT: 0x80010114)".
I can suspend the node with Suspend-ClusterNode, but draining roles was unsuccesful in one case.
In the other there were no VM's on the node so suspending went fine.
What I did find out was that when I tried to ping the node from another, proper functioning node, it took a while before the pinging started. It felt like the interface had to come back online on the problem node.
After that, I could add the cluster to the Failover Cluster Manager. However, Powershell commands still give a 0x80010114 error or a CIM error for when I use Get-NetAdapter.
A reboot resolves the problem, but only for about a week.
I know there is a topic with the same title already, but the wbemtest en rollup update "answer" is totally unclear to me why I should change something with wbemtest, or why to install updates that to me have nothing to do with this problem.
Before I did the ping test from a functioning node I pinged my DC and another node from the problem node just fine.
No waiting at all.
The cluster has three networks. Management (host only), Live Migration and iSCSI (also a VMSwitch for certain VM's).
I have no idea where to look. Evenviewer doesn't give me anything I can work with that I can find...

Hi,
Are you using the HP servers? It seems is the HP Nic team service was causing the issue, please try to
disabled the HP NIC team service from services and restarted the WMI service.
The related third party information:
Advisory: (Revision) HP ProLiant Servers - Systems Running Microsoft Windows Server 2012 or 2012 R2 May Experience a Memory Leak Up To 5 Mb/ Hour for Some NIC Teaming Configurations
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c04209163-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&ac.admitted=1401176219136.876444892.199480143
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

PowerPivot: data no longer available due to "the server object is not connected."

Hi,
I'm using Excel 2013 for building a PowerPivot model. Currently 2 table are inserted (txt files) which are related by a unique customer ID.
At for me random moments the connections with the files gets lost and no data is shown. Nevertheless, the number of rows and column headers are still visible. If I go the 'existing connections' and choose 'refresh' I got the following errror: "We couldn't
refresh the connection, please go to existing connections and verify the connect to the file or server". If I try to edit the data ('edit connection') I see immediatly a preview of the date. But when I choose save I receive the following error: "unhandeld
exception has occured in a component in your application ... The server object is not connected."
Remarkebly I never had this problem with the same data in Excel 2010. Anyone an idea what could cause this problem and a way to work around this?
Thanks in advance,
Rolf

I have the same error after installed Dec.9 updates, and then other thread suggest me remove them. it worked.
Good luck.

Active Directory error message "the following object is not from a domain listed in the Select location forestB\username

Hello Community
    "forestA" is my forest it is a Windows 2008 Server Enterprise Edition
domain controller using Active Directory and the UI.
    In my forest ("forestA") trust relationship I created a "One-Way, Out-going"
forest trust with Forest-Wide authentication so that a different forest user(s) or
group(s) with a different admin in a forest named “forestB” can access the resources in my “forestA”
    But also forestB needs to create a "One-way, Incoming" forest trust so that
I can either add the user(s) or group(s) from “forestB” into to a "Global Security - Group"
in my "forestA" or I can
add user(s) as "domain user(s)" from “forestB” into my "forestA".
    The problem is that when I right click the global group in my forestA and then
properties, when I click "Members" and then the "Add" button when I type
"forestB\username" I get an error message from Active Directory stating:
    "the following object is not from a domain listed in the Select location
dialog box, and is therefore not valid: forestB\username".
    Am I doing something wrong when creating the one-way trust in my
“forestA” or is the one-way trust being created wrong by the other domain admin in the other “forestB”?
    Or could I possibly need to select "Change Domain" or "Change Domain Controller"
before adding the users or Groups to my forestA from forestB?
    That is why I am asking
how do you add an Active Directory user from one forest into another forest?
    Thank you
    Shabeaut

Hello Denis Cooper
    That is the end result.
    What I was trying to do was that I was trying to
bring in the user(s) and group(s) from “forestB” into
my “forestA” Global group.
    Later on I was going to add the user(s) or Global groups(s) that I brought into my dc in my forestA
into the domain local groups on my member servers in my forestA.
    So since the error message is:
"the following object is not from a domain listed in the Select location dialog box, and is therefore not valid: forestB\username".
Does your response
mean only Global group(s) from forestB not domain user(s) from forestB have
to been added to domain local groups in forestA?
Or is it also possible to add Global group(s) from “forestB” to Global group(s) in my “forestA” and if so
how without getting the above error message?
Thank you
    Shabeaut

How to include the ordinary program in the BOR object type program

Hi Guys, while i am trying to include a program in the BOR object type program. It is showing the following error:
"Statement 'INCLUDE Z_ERC_SEARCH_VALOFACT_MACRO .' is not permitted in BOR".
then, i tried to add "<" and ">" to enclose it, but it wants the access key to create it. anyone knows how to add the ordinary program in the BOR object type program.

It's correct that we CAN'T insert our INCLUDES in BOR program. We CAN only use TYPE-POOLS there. So you can create Type Group with TYPES, CONSTANTS and DEFINE statements, and then use them in BOR programs.
Using DEFINE you can construct MACROs with parameters and call your code there. It's limited, and not the easiest way, but some things can be achieved this way. Also forget about using Code Patterns while editing Type Group.
Note: Use TYPE-POOLS statement after INCLUDE statement in BOR program .
Best regards,
Tomas.

Error:[The specified object was not found in the store] when trying to read another mail box using Delegate access

Hi all,
I need to create service to access all unread mails of other mailbox's every time in Exchange server 2013, for that i trying to use Delegate access.
but i am not succeed. I am getting Error Every time : [The specified object was not found in the store]
error shows in FolderId in
var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
List<DelegateUser> newDelegates = new List<DelegateUser>();
DelegateUser emailDelegate = new DelegateUser("[email protected]");
emailDelegate.Permissions.InboxFolderPermissionLevel = DelegateFolderPermissionLevel.Editor;
newDelegates.Add(emailDelegate);
Mailbox mailbox = new Mailbox("[email protected]");
Collection<DelegateUserResponse> response = service.AddDelegates(mailbox, MeetingRequestsDeliveryScope.DelegatesAndSendInformationToMe, newDelegates); var userMailbox = new Mailbox(useremail);
var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
var itemView = new ItemView(20);
var userItems = service.FindItems(folderId, itemView);
i changed my code in many ways by adding new Delegate User with different folder permissions.
but i am getting same Error, Please help me.

That error means you don't have rights to the Mailbox your trying to access. In Exchange by default the only user that has access to mailbox is the owner of the Mailbox, Exchange Administration rights does not grant you access to another users mailbox. You
need to either specifically grant rights to each mailbox using Add-MailboxPermissions or use EWS impersonation where you can impersonate the owner of the Mailbox see
http://msdn.microsoft.com/en-us/library/bb204095(EXCHG.140).aspx and
http://msdn.microsoft.com/en-us/library/office/dd633680(v=exchg.80).aspx
Cheers
Glen

An error occured while opening the connection: Object reference not set to

After I uninstalled Oracle Developer Tools for Visual Studio .NET 10.1.0.4 and installed Oracle Developer Tools for Visual Studio .NET with Oracle10g Release 2 ODAC 10.2.0.2.21 I got the error message below when I want to connect to my 10g database using Oracle Explorer.
Error:
An error occured while opening the connection: Object reference not set to an instance of an object
I use OracleConnection to open also cannot be done. But I use Oracle SQL Developer I can connect to orcl that I cannot connect using ODAC 10.2.0.2.21 in my laptop.
Please help me.
Ming Man

Sorry my mistake, I double checked, the one I uninstalled is ODAC 10.2.0.2.20 and not ODAC 10.1.0.4.
But I have that error.
Ming Man

Where to call the BOR objects in the wokr flow builder

where do we call the BOR objects in the workflow builder
suppose we need to trigger the even bus7015 or some thing like that in the workflow to find if the manger is terminated or not
where do we call a bor object in work flow.

<img src="https://weblogs.sdn.sap.com/weblogs/images/37984/ChangeWF.JPG">
Second icon from the right...looks like a silver hat with a red brim.

How to transfer my container element to the bor object

Hello
I am quite new to workflow. I have created a workflow with a task and in this task I have a container element that is an Id for a campaign element and I can see that the container is filled correctly. In my task I call a BOR object amd a method and I want to transfer my campaign Id to this method, but when I debug I can see the ID is getting into the bor object. How do I get the id into the bor object
Thanks
Claus

Hi Claus
After binding from task to method. You will get the data in the method parameters but to transfer the data from parameter to method you need to use this code in your method.
SWC_GET_ELEMENT CONTAINER 'CONTAINER NAME' VARIABLE NAME.
SWC_SET_ELEMENT CONTAINER 'CONTAINER NAME' VARIABLE NAME.
Use this statement to get the data to the method container.
Regards
vijay

The method clone() from the type Object is not visible

Hi,
This is my 1st post here for a few years, i have just returned to java.
I am working through a java gaming book, and the "The method clone() from the type Object is not visible" appears, preventing the program from running. I understand "clone" as making a new copy of an object, allowing multiple different copies to be made.
The error occurs here
public Object clone() {
        // use reflection to create the correct subclass
        Constructor constructor = getClass().getConstructors()[0];
        try {
            return constructor.newInstance(new Object[] {
                (Animation)left.clone(),
                (Animation)right.clone(),
                (Animation)deadLeft.clone(),
                (Animation)deadRight.clone()
        catch (Exception ex) {
            // should never happen
            ex.printStackTrace();
            return null;
    }The whole code for this class is here
package tilegame.sprites;
import java.lang.reflect.Constructor;
import graphics.*;
    A Creature is a Sprite that is affected by gravity and can
    die. It has four Animations: moving left, moving right,
    dying on the left, and dying on the right.
public abstract class Creature extends Sprite {
        Amount of time to go from STATE_DYING to STATE_DEAD.
    private static final int DIE_TIME = 1000;
    public static final int STATE_NORMAL = 0;
    public static final int STATE_DYING = 1;
    public static final int STATE_DEAD = 2;
    private Animation left;
    private Animation right;
    private Animation deadLeft;
    private Animation deadRight;
    private int state;
    private long stateTime;
        Creates a new Creature with the specified Animations.
    public Creature(Animation left, Animation right,
        Animation deadLeft, Animation deadRight)
        super(right);
        this.left = left;
        this.right = right;
        this.deadLeft = deadLeft;
        this.deadRight = deadRight;
        state = STATE_NORMAL;
    public Object clone() {
        // use reflection to create the correct subclass
        Constructor constructor = getClass().getConstructors()[0];
        try {
            return constructor.newInstance(new Object[] {
                (Animation)left.clone(),
                (Animation)right.clone(),
                (Animation)deadLeft.clone(),
                (Animation)deadRight.clone()
        catch (Exception ex) {
            // should never happen
            ex.printStackTrace();
            return null;
        Gets the maximum speed of this Creature.
    public float getMaxSpeed() {
        return 0;
        Wakes up the creature when the Creature first appears
        on screen. Normally, the creature starts moving left.
    public void wakeUp() {
        if (getState() == STATE_NORMAL && getVelocityX() == 0) {
            setVelocityX(-getMaxSpeed());
        Gets the state of this Creature. The state is either
        STATE_NORMAL, STATE_DYING, or STATE_DEAD.
    public int getState() {
        return state;
        Sets the state of this Creature to STATE_NORMAL,
        STATE_DYING, or STATE_DEAD.
    public void setState(int state) {
        if (this.state != state) {
            this.state = state;
            stateTime = 0;
            if (state == STATE_DYING) {
                setVelocityX(0);
                setVelocityY(0);
        Checks if this creature is alive.
    public boolean isAlive() {
        return (state == STATE_NORMAL);
        Checks if this creature is flying.
    public boolean isFlying() {
        return false;
        Called before update() if the creature collided with a
        tile horizontally.
    public void collideHorizontal() {
        setVelocityX(-getVelocityX());
        Called before update() if the creature collided with a
        tile vertically.
    public void collideVertical() {
        setVelocityY(0);
        Updates the animaton for this creature.
    public void update(long elapsedTime) {
        // select the correct Animation
        Animation newAnim = anim;
        if (getVelocityX() < 0) {
            newAnim = left;
        else if (getVelocityX() > 0) {
            newAnim = right;
        if (state == STATE_DYING && newAnim == left) {
            newAnim = deadLeft;
        else if (state == STATE_DYING && newAnim == right) {
            newAnim = deadRight;
        // update the Animation
        if (anim != newAnim) {
            anim = newAnim;
            anim.start();
        else {
            anim.update(elapsedTime);
        // update to "dead" state
        stateTime += elapsedTime;
        if (state == STATE_DYING && stateTime >= DIE_TIME) {
            setState(STATE_DEAD);
}Any advice? Is it "protected"? Is the code out-of-date?
thankyou,
Lance 28

Lance28 wrote:
Any advice? Is it "protected"? Is the code out-of-date?Welcome to the wonderful world of Cloneable. In answer to your first question: Object's clone() method is protected.
A quote from Josh Bloch's "Effective Java" (Item 10):
"A class that implements Cloneable is expected to provide a properly functioning public clone() method. It is not, in general, possible to do so unless +all+ of the class's superclasses provide a well-behaved clone implementation, whether public or protected."
One way to check that would be to see if super.clone() works. Their method uses reflection to try and construct a valid Creature, but it relies on Animation's clone() method, which itself may be faulty. Bloch suggests the following pattern:public Object clone() throws CloneNotSupportedException {
   ThisClass copy = (ThisClass) super.clone();
   // do any additional initialization required...
   return copy
if that doesn't work, you +may+ be out of luck.
Another thing to note is that Object's clone() method returns a +shallow+ copy of the original object. If it contains any data structures (eg, Collections or arrays) that point to other objects, you may find that your cloned object is now sharing those with the original.
Good luck.

After REFRESH the cached object is not consistent with the database table

After REFRESH, the cached object is not consistent with the database table. Why?
I created a JDBC connection with the Oracle database (HR schema) using JDeveloper(10.1.3) and then I created an offline database (HR schema)
in JDeveloper from the existing database tables (HR schema). Then I made some updates to the JOBS database table using SQL*Plus.
Then I returned to the JDeveloper tool and refreshed the HR connection. But I found no any changes made to the offline database table JOBS in
JDeveloper.
How to make the JDeveloper's offline tables to be synchronized with the underling database tables?

qkc,
Once you create an offline table, it's just a copy of a table definition as of the point in time you brought it in from the database. Refreshing the connection, as you describe it, just refreshes the database browser, and not any offline objects. If you want to syncrhnonize the offline table, right-click the offline table and choose "Generate or Reconcile Objects" to reconcile the object to the database. I just tried this in 10.1.3.3 (not the latest 10.1.3, I know), and it works properly.
John

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
Thanks for any suggestions.

I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
Now I am back on my Mac. I meant the following: Batch Change the date for a large range of photos, that should have a date stepped in increments.
Select all Photos at once and use the command "Photos > Batch Change".
Then set the date for the first photo and select an increment, e.g. one minute.
Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date. This way it will be unnecessary to change the titles or filenames.

Adobe Photoshop CS4 message: "Licensing for this product has stopped working." I have the serial number but not the media. How do I use the software?

I recently tried to use Photoshop CS4 that I have on my computer but I get the message:"Licensing for this product has stopped working." I have the serial number but not the media. How can I use this version?

You can get the installer here: Download CS4 products
It will install as a fully functional 30 day trial. Entering your serial number will convert it to a permanent version, Standard or Extended, depending on what serial number you purchased.
If you still have the license problem. get back to me with your OS details and the error code.
Gene

I see that there are people that have the problem suddenly almeer notes disappear this is with me also happened and now comes the: If I put a backup that I have my back than notes for 30 seconds back and THEN THEY DISAPPEAR again!

i see that there are people that have the problem suddenly all notes disappear :
this is with me also happend and now comes it
when iputa backup that i have back than i kan see the notes voor 30 seconds and than the disappear again!

Hello,
Just to set your expectations...it's fine to "rant" about things here, but I do hope you are not expecting a formal reply from anyone at BlackBerry. For this site is not a channel for any formal communications with, escalations to, nor support from BlackBerry for any purpose whatsoever. Rather, it is a user-to-user community of volunteers who try to help each other out to the best of their abilities. Note this banner, please, posted at the top of nearly every page of the site:
Consequently, words posted such as "WHAT THE HECK IS WRONG WITH YOU?" are actually directed at the other kind volunteers of this site, who may not respond in the most kindly of fashions. Hopefully, we all can understand that your rant is directed at BlackBerry (though, by placing it here, it is misplaced), but I just wanted to gently caution you about such posts, as well as ensure that your expectation concerning replies is properly set. Also, for new members who join the site, it's always good to have responses to such posts, covering the intended use of the site so that those new members can better understand such things.
On the other hand, if you do desire assistance from other users for your issues, you might consider wording your requests in a manner that would motivate a kind volunteer to provide such.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hi, When I try to sync my iphone not all the music in my itunes library syncs successfuly even though I have a lot of space left and I have the 'sync all music' option selected. Any idea? Thanks

Hi, When I try to sync my iphone not all the music in my itunes library syncs successfuly even though I have a lot of space left and I have the 'sync all music' option selected. Any idea? Thanks

While you're correct in that Windows media won't sync to the iPhone (or any i-device), the OP states that all the music is in iTunes. If its in iTunes, it would no longer be in Windows media format since it would have been transcoded to whatever the user sets as their import preference (AAC, mp3, etc.), and once that is done then the media should be able to sync to the iPhone just fine.
To Steph, do the missing songs play OK in iTunes? If not then they could be corrupted in some way. If they play fine in iTunes but don't sync, are they unchecked in iTunes? They won't sync to your iPhone if it is set to ignore unchecked items. Finally, if these are iTunes purchases, are they protected format? (i.e. m4p files) If so, is your computer authorized to play them? (you'd know if you try to play them in iTunes, it would prompt you for the account password if not authorized)

I have the BOR object selfitem not delegated to any subtype

Similar Messages

Maybe you are looking for