I have the form auto-fill as am add on. How do you turn it on when a form comes up for eg., a contribution?
Before I got Firefox, I would always click on a button once and my form would be filled out for contributions. I want to do the same with Firefox but have to fill out each form in staid of using auto-fill. How do you turn it on. I have the add-on it just does not seem to work.
That does sound messy and unexpected. Generally, property nodes should force an actual update synchronously. Are you sure the two are actually consecutive? Are they connected with an error wire or a reference? Can you upload a VI which demonstrates this?
If that doesn't help, you could try using defer panel updates. The ideal would probably be to call it once before and once after, but you might need to place it in between as well.
Try to take over the world!
Similar Messages
-
How do you go to marker when there is a wait for mouse click between the markers?
I cant seem to get by the wait for mouse click, when using go to (marker)
I have a game that I have 2 push buttons one is
on mouseUp me
go to frame 9
end
on mouseUp me
go to frame 29
end
There is a wait to click in between these 2 frames and when I click on the 2nd button to go to frame 29 it stops at the wait to click?
I have tried all these below and cant get past the click to wait?????
go
go to frame
go to marker
_movie.go
_movie.marker
_nextMarker=Think this issue is resolved but to ensure the full answer is available, here it is.
First, it's a bad idea to use the Tempo channel at all. You can use a script to do anything that you can do there. I have Lingo alternates to the Tempo channel at:
http://www.deansdirectortutorials.com/Lingo/tempoLingo.htm
(think I need to update this page though)
So - DO NOT USE the Tempo Channel setting - Wait for Mouse Click or Key Press.
The above setting creates a type of pause that interferes with other interactivity.
Instead - use a 'Hold on Frame' behavior (from the Library Palette - Navigation category) or it could be written as:
on exitFrame
go the frame
end
Once you have the above behaviour in you desired frame, you can attach a sprite behaviour to your buttons / links. A good one to use is the ‘Jump to Marker Button’ behaviour in the Controls category of the Library Palette. You can attach this behavior to different sprites and just change the marker setting of the behavior, removing the need to have individual hard-coded scripts for each button.
Next – DO NOT link to frame numbers. Always link to a marker. You may insert or remove frames. This would cause your incorrect links since the frame number would no longer the right point.
Next – the following all do the same thing:
go to frame “markername”
go to “markername”
go “markername”
So, you can leave out ‘frame’ or even ‘to’ as they are not needed. I still use ‘go to’ as it feels more natural to me (just history).
or you could use:
_movie.go("dean")
Don’t use
go to marker “markername”
I think that did work at some point but not anymore.
marker can be used as follows:
go marker (-1)
Where -1 is the amount of markers back (could be forward as well).
Well, that gives the detailed answer to your question.
Dean -
Ringback Tones - "Please enjoy the music while your party is reached." How do you turn this off???
How do you disable the ringback tone feature that says, Please enjoy the music while your party is reached?
sgoodman606 lets take a look and see what options are available! What device make/model do you have? Are you using the default or a purchased ringback tone?
AshleyS_VZW
Follow us on Twitter @VZWSupport -
I know have a document and data storage on my iTunes. how do you get rid of it
i know have a document and data storage on my iTunes. how do you get rid of it
Very helpful, ty.
FYI for others. I also had to disable the Default Tab 1.0 addon. -
Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.
As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
How do I reset a company owned iPad if I don't have the former users iTunes account password
How do I reset a company owned iPad if I don't have the former users iTunes account password
You'll need to contact Apple directly with proof of ownership of the device for the company, and have them remove it.
Otherwise it cannot be done directly. -
I somehow deleted a folder filled with bookmarks from Safari. I have the same folder on my Firefox application. How do I transfer the folder on Firefox over to Safari?
I found the post under the "More Like This" window at the top right of the Discussions page:
Essentially, it led me to:
In my case I didn't want to import all of my bookmarks, just a folder.
What I did was: In Firefox: Bookmarks > Organize
Select the file folder of bookmarks I wanted to move to Safari
Under the "star"icon in toolbar, select Export HTML
Select location to save the file, then SAVE
Open Safari,
Import Bookmark.... -
How do you turn off the auto select behavior when working with shape layers?
How do you turn off the auto select behavior when working with shape layers?
I am using either of the path selection tools to select only some of the paths on the layer. I have the proper layer targeted. I have the selection too auto select option turned off.
If another layer has a path in that area, that layer becomes auto targeted and I get the wrong path. Turning off the layer is the only way to avoid this but then I have to turn on the layer back on between making my selection and transforming to use the other layer as guide. Is there any way to stop this auto select? Locking the other layer does not stop the auto select, just prevents editing.As far as i know the move tool options don't have any effect on the path selection tools.
You might try clicking on one of the path points or on the path itself with one of path selection tools and if you want to select multiple points
you can shift click with the Direct Selection Tool or Alt click to select the entire path.
more path shortcuts:
http://help.adobe.com/en_US/photoshop/cs/using/WSDA7A5830-33A2-4fde-AD86-AD9873DF9FB7a.htm l
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7391a.h tml -
How do you turn off the auto grid?
How do you turn off the auto grid? I read in a forum that the solution is "View- show- turn off grid". But the weird thing is I had to have that website open to even get the alternative up under "View". If I didn´t, there were other alternatives there. Why?
The second problem is, when I finally got the "Turn off auto grid" alternative up, it will not be unchecked…. I´m working on a mac.
Thank you in advance!
JeanetteView > Snap To > None.
Nancy O. -
can you have multiple Apple TV's in the same house and network? If so how do you know which one to pick from your Idevice?
Yes, there are even defaults for naming them, such as LivingRoom, Bedroom, etc, or you can even enter your own name with the remote for each AppleTV.
-
How can two users work on iMovie? My husband is working on a memorial video for a family member who passed, I plan to edit but he had to take his computer to work. I have the iMovie project on a zip drive. How do I get it to open in my imovie?
You will need an external drive that is formatted as MAC OS EXTENDED (journaled).
Move the Project, Events, and any photos and music to the external drive by following the instructions in this post.
https://discussions.apple.com/docs/DOC-4141
Be sure to use CONSOLIDATE MEDIA to get the photos and music. Then plug this drive into your computer and you will be able to edit. -
I have the new iPad . I don't know how my sister's apple ID was set. I have all under my iTunes account but when i need to update my apps, a different apple ID come up! how do i change that?
Hi maggieanntb, your sister's Apple ID came up because an app(s) was downloaded using her account. To prevent that from happening, you would have to delete the app(s) that were downloaded on her's, and re-download them using your own Apple ID.
-
I have an old app in my updates but no longer have the app on iTunes and iPhone 4s. How can i remove it? It is beyond annoying, as it constantly has the badge noticfication but can't update the app as it is no longer avaliable. Help!!!
Unfortunately the app isn't avaliable in the Australian store only avaliable to download in the UK store, very confussing as it is definitely not in my iTunes or on my iPhone. I don't understand how or why it managed to get to updates. I just want to delete it or at least get rid of the notification badge for it.
-
TS2755 How do I turn of imessage when i no longer have the iphone!?
How do I turn of imessage when i no longer have the iphone it was activated on? so frustrating dont get any messages from iphone friends also it seems like there is no solution to this problem and to make it worse apple cant help without a serial number!!
please
Allan Sampson
wjosten
can you do something about my message, to much personnal info. Possible to make it diseappear ? -
I am re-installing itunes on a PC Win 7 and have the message: "apple mobile device failed to start verify that you have sufficient privilegesto start system services" what does this mean? how do I check and rectify? I am already logged onto the PC as administrator
I am having this same problem. I took Kappy advice on restarting the Apple Mobile Device Service, however that did not work. I got this message in a pop up window that came up immediately.
Windows could not start the Apple Mobil Device Service on local computer.
Error 1053 The service did not respond to the start or control request in a timely fashion.
I have already uninstalled itunes, all the related programs and I cannot reinstall, this Apple Mobil Device message stops the install.
Can anyone please help?
Maybe you are looking for
-
does anyone know where I can download the patchsets for either of these products. I tried metalink and technet and I cannot find either ..
-
Process order creation problem
I am creating a process order . while creating the process order system is throwing error as Auto batch numbering not set up for material type XXXX in plant xxxx . System is not allowing to create process order. How to resolve the issue.
-
PO should be send to vendor (PDF)as soon it is approved and print hard copy
Hi, I have 2 requirements as below 1) The PO should be send to the vendor in PDF as soon as it is released to the e mail id of the vendor maintained in the vendor master. Also a hard copy of the PO should get printed. 2)if the PO does not require a
-
I use GB since a long time, but today i have massive problems after i installed some new free loops from the web. But i don't know if are the new loops directly the problem. I can use any loop and the problem comes again and again. Please take first
-
Dear all My clients wants to map the consumable artilces in SAP *Requirement from tha client : client wants to procure consumable articles , for which Stock and value should update at Warehouse level and not at Plant level. THEY WILL RAISE PO only a