I have the l latest iMac with the Lion OS. Can it be used as a secondary monitor to a PC laptop? If so, how is this accomplished?
I have the l latest iMac with the Lion OS. Can it be used as a secondary monitor to a PC laptop? If so, how is this accomplished?
This is called Target Display mode, unfortunately this isn't possible with a current iMac unless the PC Laptop has a Thunderbolt outpout port which I'm certain it does not. Please read both Target Display Mode Mid 2011 iMacs & if you are interested Target Display Mode 2009 & 2010 iMacs.
Similar Messages
-
I have an older model iMac with Snow Leopard. Can I download the icloud? and if so from where can I do that?
iCloud requires OS X 10.7.2 or later, so you have to upgrade to OS X Mountain Lion or Lion.
First, see if your Mac is supported > http://www.apple.com/osx/specs If it's supported, open App Store and purchase Mountain Lion. While Mountain Lion is downloading, you can make a backup of your data.
When the download finishes, the installer will show up, so follow the steps to upgrade Mac OS X. After upgrading, you will be able to log in iCloud in System Preferences > iCloud.
Also, see if your programmes are supported > http://www.roaringapps.com -
if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???
Log a bug with Apple, with whatever details you can provide. In the interrim, consider acquiring a router; either a repurposed x86 box running open-source networking or gateway software, or a commercial device.
-
I want to know what to expect in terms of moving from one OS to another. Having been a Windows guy until last summer, my only experience is going from one version of Windows to another, which is usually a fairly costly purchase. I will want to go to Lion, but as a retired teacher, my income is fixed. I am not looking for a specific price, I am sure that is unknown, but I would just like to know help Apple does these things so I won't be sadly surprised.
Historically Apple has sold OS X upgrades via DVD media however with the advent of the Mac Apple Store that throws another possibility into the mix. That's about as much as I can say as these forums don't allow us to speculate about future products. As for the cost historically Apple has priced OS X upgrades between $29-$129, the last upgrade (Snow Leopard) was only $29 but that was an exception. Again we cannot speculate on these forums about that. The good news is that Apple is unlike Microsoft which makes OS upgrades expensive and complicated. The choice with OS X is do you want a server version (most users don't need one) or a single computer license. The users that buy server versions tend to have a number of Macs they manage from a server, most consumers don't have this issue.
Keep reading the news, as you know Apple has announced a Summer release for Lion.
Upgrades on OS X are usually very simple. I've upgraded from Tiger to Leopard to Snow Leopard and each transition has been very easy. With any major OS upgrade there are some basic rules to follow, for example always, always, always backup prior to any update. When Lion is released to the general public post again for what to do to prepare or even do a Google search on "How to prepare for OS X upgrade" and you will find a number of articles that will provide some suggestions and valuable insight. You can also re-post here and users will be happy to assist. -
Using 3.1Ghz i5 iMac 2011 with 6970M and OSX Lion 10.7, I'm having this temperature issue on the GPU diode where it was hovering around 80C on just normal task (browsing web). From iStat I noticed that the Graphic Module was taking full 33W even though I was just browsing.
But I did have a secondary display running at 1920x1080 via the thunderbolt port. The moment I disconnect it the Graphic Module drop to 15W and the GPU diod drop to around 60C.
So was it caused by the thunderbolt? Why does running external monitor taxing the GPU so much?Try resetting the SMC and see if that helps. On occasion it takes 2-3 resets for it to "take."
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
What iMac version (at home) do I need to use it as external monitor for a lenovo laptop (business)
Hi Apple Fan's
I have a lenovo (T400) for business and would like to use an iMac at home as external monitor.
I saw a lot of topics but no final response if it's possible with one of the (older) iMacs.
Is there an iMac (not needed to be version 2011) that can do this?
thanks for your help!
regards from Switzerland
PatrickThe only iMac models that support direct input as a monitor from a non-Mac computer are the 27-inch iMac (Late 2009 or Mid 2010) and those accept only DisplayPort input. See:
http://support.apple.com/kb/HT3924
The 2011 iMac will support only another Mac with a Thunderbolt port.
Regards. -
Has anyone used the new 5K imac with AE CC and is it a big improvment speed wise or not?
I am thinking about getting the 5K imac with the i7 4.4 GHz quad-core and AMD Radeon R9 M295X 4GB GDDR5, but my big concern is that the video card is not Nvidia and does not use cuda core.
I currently have a late 2012 imac with the 3.4 Intel Core i7 and a Nvidia GeFroce GTX 680MX 2048 MB and sometimes it is very slow when working with a lot of effects or layers.
1. If you have any experience with the 5K imac, please let me know how you like it?
2. Was Apple going to the AMD video card a good or bad thing?
3. Do you think I would benefit any speed gain with the new 5K imac and by what percentage.The AMD video card is not a good hardware selection with the current media content creation software. Open CL is still lagging behind CUDA in performance and the CPU's did not change with the new Imac. So basically it's a new Imac with a updated video card and 5K screen. Not something I would suggest for Adobe if you already have an Nvidia solution.
Eric
ADK -
I have a late 2009 iMac, with the default Nvidia 9400 Graphics card.
I was wondering what my options are for upgrading. I use Windows 7 via Bootcamp, so I need a card that is compatible/has available drivers.
This is for gaming. On the lowest settings of "Call of Duty 4", I get about 100 FPS... Was hoping to be able to play on higher resolution w/o the fps lag.
I'm not good with the hardware part of computers at all, but know how to get around the OS.In most cases the graphics cards in iMacs are Not upgradeable. They are usually soldered to the logic board. RAM is considered, along with harddrives, the only component that is upgradeable in an iMac, unlike in PC's. So basically you would need to sell your unit and purchase an iMac with a more powerful graphics card.
Hope this helps -
The apple coloured ball keeps appearing in photo elements 13 but not in any other programme including premier elements and organiser. I have the latest IMac with ample storage and ram
I believe I have solved the problem. I have 16mb ram so I went into photo
preferences and raised to 75% what is available for photo
I also reduced the cache from 6 to 2. The last two sessions the coloured
ball has not appeared. Hope this might be usefull to others
Rgds J McBride
On Sun, Jan 25, 2015 at 7:15 PM, Barbara B. <[email protected]> -
I have a 27 inch iMac with maverick os. my current version of iMovie (10.0.6) will not open older projects i created in iMovie 9.0.9. I can find the projects and they have a ".rcproject" file extension
Thank you GeeD. I'm still stymied.
I have moved the Event and Project Folders to the "top-layer of the drive" as the instructions state, right alongside the System Folder, Users Folder and Applications Folders.
When I open iMovie 10.0.8, the Events and Projects Folders are empty:
When I select File/Update Projects and Events, I get an alert box that says iMovie couldn't find any:
Not knowing exactly what is meant by the "top layer" in the instructions, I moved the Events and Project folders back inside the "Movies" folder where I found them (but then not where I would call the "top" layer, but rather "iMac/Users/Home/Movies/iMovieProjects". Then I tried to "Update Projects and Events" and received the same alert: "iMovie could not find any projects or events to update."
Then I tried to update iMovie 9.0 (iMovie '11 version 9.0 (1073)) to version 9.0.9 .
[As an aside, the nomenclature of iMovie drives me nuts. The latest version is 10.0.8, which us newer than iMovie '11.]
Back to the update of version 9.0 to 9.0.9.
Presumably because I have version 10.0.8 installed, I got this alert box:
So, I cannot update version 9.0
and I cannot "Update" the Events and Projects created in version 9.0. -
i have an imac g4 purchased Dec 2003 runnung OS 10.5.8. It runs fine with airport off, but when I turn airport on it freezes with the black page, "restart by holding power key . . ." I swapped the airport extreme card with the one in my ibook G4 (purchased same date and running same OS). No change in operation.
I am running wifi from verizon. Recently changed from mifi2200 to jetpak 4620 in a 3G location. Ibook running fine, desktop freezes. If I can boot desktop in safe mode and get airport turned off in time. then I can reboot regularly and imac runs flawlessly with no wireless.Have run disk utilities and TechTool Pro rebuild etc, but nothing has worked. How do I fine the culprit?the power logix thing was really sad. apple changed so much after 10.4.8 that there wasn't a viable way to patch the software.
That statement is precisely why I don't believe in blindly updating the OS, especially in a non-standard machine.
We can't expect third parties to support us forever, and it is shameful to break something that works fine, except that we updated the OS....
I think that any upgrade or modification to a machine or the OS greatly increases the risk of trouble or incompatibility with current configuration and "new" system files.
After all, the component or software could only be tested as far as the current OS version when the component or software was released.
Beyond that, we are all "beta testing".
Following a beta tester protocol, and applying updates to a cloned system drive first, is a prudent way to approach updates, and not only for older, heavily modified machines.
After 10.4.8 and moreso with Leopard, the focus is primarily on Intel architecture, not PPC architecture.
Like it or not, we are all updating to the abyss of the extinction of our machines, unless we can be satisfied with the last stable version of OS that works well with our hardware and software.
I wish they would include the latest pkgs at least with software update.
Yes, having individual packages, rather than lump "OS X 10.x.x" updates would be nice.
This way, one could update as one sees fit. That is to say, for example, fix the Quicktime, but leave my Network alone, etc., etc.
In all fairness, Apple does provide for some breakdown of updates, but I believe there is much room for improvement, especially, as you point out, with regard to the core services portion of the OS.
Until then, I'll leave Software Update disabled....... -
I have a Bootcamp partition on my Imac with Mavericks which I can't delete because the Partition Layout in Disk Utility is greyed out and is stuck on 'Current'. What can I do? I was trying to install Windows 8.1 but apparently, this is not yet possible.
I was originally able to restore to my original Mac OSX partition using Boot Camp Assistant but then after entering Disk Utility and re-RAIDing the default RAID 1 to RAID 0 in the BootCamp partition (I suspect this is the cause of the problem but why was it defaulted to RAID 1 in the first place?!!!!), forever afterwards, I couldn't restore the single OSX partition.
Whenever I used BootCamp Assistant my choice to 'Install or remove Windows 7 or later version' was greyed out. Finally I went to Disk Utility to repartition but the Macintosh HD and BootCamp disk partition functions were also greyed out (even if I started up from Recovery mode holding down option, command and 'R' and choosing Disk Utility). BootCamp Assistant gives the error message 'The startup disk cannot be partitioned or restored to a single partition' with additional small script 'The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows', and DU gives the error message 'The full size of the Fusion drive is not available for repartitioning'.
What can I do to fix this problem? How can I make the Partition Layout button active in DU so I can change the partition to all OSX? I'm prepared to wipe off all my data etc to repartition and have backed up all to disk using Time Machine.My problem is fixed now, thank you. It was caused by my changing the Boot Camp partition's 'RAID1' to 'RAID0'. If I hadn't done that, Boot Camp would still have been able to 'restore' back to the one partition. It was fixed with the help of Applecare by using a terminal and typing a command to erase the IP of the Macintosh disk (not the volume) as well as the IP of the Bootcamp partition (if I remember correctly), but then I had to restore the OS and all my applications and data etc which I had previously backed up using Time Machine. I haven't taken note of the exact command terminology used. It would be wise to speak to Applecare about this if possible.
Two words of warning, 1. According to the cause of this problem, it might be wise, after reinstalling the ops system to reinstall all extra applications one by one, manually, in case a similar problem arises again. Then manually copy back all data. Or the Mac user could use the Time Machine backup and then uninstall all the added apps then re-install them one by one manually. 2. Beware as after all this the user might not have the 'Recovery partition'. There is a small recovery partition (a few 100 Mb is size) which comes with all later Macs. After all this is done this tiny partition might not be there anymore and the user might have to re-install Mavericks again to get it back, or just install the upcoming update of Mavericks due in a month or so. -
my iphone crashed during update now i have to restore but dont have my latest photos backed up ? i have a picture of itunes with the usb on my screen and cant go any further? is there a way to get it back without the update?
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
worth looking at for the future to understand backing up etc -
i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .
Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable. -
I have purchased a new iMac, with Safari 5.0.5, but it won't retain bookmarks, I thought I can download a new Safari from Apple. So I deleted Safari from the application folder.
Then I tried to download Safari from Firefox but after finish download, what I got was a dmg file, with a pkg icon (an opened box) and it can't be installed. Same with Google Chrome.
My question is: how can I download Safari? And will it retain bookmarks?Reinstall Safari from the Optional Installs.pkg on your Mac install disc that came with your iMac. Or in your case, you use Pacifist to extract the Safari app from the .dmg file.
To bookmark a webpage:
Go to the webpage you want to bookmark. If you use tabs, you can open multiple webpages in tabs to bookmark them as a collection.
Choose Bookmarks > Add Bookmark, or Bookmarks > “Add Bookmarks for These Tabs.”
Type a name for the bookmark or collection in the dialog that appears.
Specify where you want to keep the bookmark or collection. You can add it to the bookmarks bar, the Bookmarks menu, or to a collection if you have created any.
Click Add.
To add a bookmark quickly, click the Add button in the toolbar, or drag the webpage’s icon from the address field to the bookmarks bar.
To see your bookmarks, choose Bookmarks > Show All Bookmarks.
In the future, rather then deleting an app, come here and ask for help first. More times then not, you will save yourself time and trouble.
Maybe you are looking for
-
After Effects Immediately Crashes Each Time I Open It
Every time I try opening After Effects on my computer, it goes through loading the title screen, but as soon as the window for the program opens up, it crashes with no error. I've tried all of the error tutorials and even Downloaded Adobe Support Adv
-
Weblogic 10.3.4 stuck thread after attempting to passify ApplicationModule
Using ADF 11.1.1.4 Is there any reason that Weblogic should ever end up with a stuck thread when attempting to passify an application module. See the stack trace below. There is no indication of what business components if any were responsible. It go
-
Protecting some of the form fields
I have set up auto-populating of form fields in an Acrobat Pro 9.0 form. A selection from a drop down (a company name) auto-populates the address, phone number fields, etc. How can I lock or protect the address and phone fields so that someone can't
-
MB1B i need to check the stock overview & venodr stock
HI Experts, i need to send the stock to subcontractor..so PO reference mb1b 541 movement type i m sending the stock..here i want to see the stock overview as well as see the vendor stock also.. if there is any setting or threre to check the s
-
How to make message transfer to a topic from a business service synchrouns?
hi, I am posting a message to a JMS queue using a business service (say A) and then I am fetching that message from that queue and using a proxy service (B) and a business service (C) for transferring that message to a topic, now I want that my busin