I have three iphones that synchronize with outlook 2010,each with a different profile.Two of them, running ios4.3 succesfully update contacts with the apropriate profile of windows/outlook (which is open at the time). The third iphone using ios 5.1 will a
I have three iphones that synchronize with outlook 2010,each with a different profile.Two of them, running ios4.3 succesfully update contacts with the apropriate profile of windows/outlook (which is open at the time). The third iphone using ios 5.1 will always sync contacts with the admin account, regardless of the win/outlook account being open.
I have three iphones that synchronize with outlook 2010,each with a different profile.Two of them, running ios4.3 succesfully update contacts with the apropriate profile of windows/outlook (which is open at the time). The third iphone using ios 5.1 will always sync contacts with the admin account, regardless of the win/outlook account being open.
Similar Messages
-
G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already, nothing ,.. Ppc g4 Mac
Should I check the memory cards themselves? Reseat them?
Yes.
Memtest X or Rember to test the RAM.
Reseat is also good.
The iPhone 4 doesn't like USB 1.1 much.
after the update the computer was working well, except for this freeze when ever I connect iPhone.
I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
Never an issue.
Can't say the same for USB 1.1.......
The above (previous post) linked PCI card is cheap enough.
Want cheaper, try this:
http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
OS X has native NEC chipset USB support. -
My iphone plus is bending, what does Apple offer regarding this issue?
I am trying to get to contact with Apple Customer Care, but not clear to me how to do it beside this channel of communication. I bought the phone from kosovar carrier which is under Slovenian ownership. This means that the original warranty comes from Slovenia, bit complicated but still I would like to get an urgent answer how to proceed with this issue, thanksMaybe i should have only asked if anyone is aware on apple's policy
regarding bending. I took the point that this seems not a proper forum to
pose Q's to apple thanks to both
On Wednesday, November 5, 2014, Apple Support Communities Updates < -
I have received notification that the "Complete My Album", Music Speaks by Candice Glover is now available to download. I have three devices that are all enabled to receive automatic downloads. My problem is the same on all three devices.
Only 0.05 minutes download on each song with the exception of the original song purchase: I Am Beautiful. What needs to be done to solve this problem?It seems that I have solved my issue by performing a full factory reset (erasing all content, something which I had hoped to avoid) restoring from an iCloud backup did not alleviate the issue, I had to set up as a new iPad.
Hopefully anyone else else who has this issue in the future will be able to find this. -
Its a 5S,I couldnt automatically connect to an already paired bluetooth device the next time.Have to forget that device then re establish each time.Am i missing any setting that does it ?Also if i turn on the bluetooth via settings and turn off it via control center,the settings page still reflects its on ,is that a bug in IOS ?
What kind of Bluetooth device?
When you turn it off in Control Center, are you looking at the Settings page? If so, you need to close control center for it to reflect the change. When you turn Bluetooth off in Control Center and look on the Status Bar, what do you see? Do you see the gray Bluetooth icon? If you have Settings closed and turn Bluetooth off on the Control Center and then open the Settings app, do you still see Bluetooth enabled? -
I dragged a copy of a photo onto my desktop from iPhoto, and it seems to be in some state of process/activity (vs. just being a copy of a photo on my desktop). I tried to delete/move to trash the photo, and I keep getting the following message: “DSC_0073.JPG” can’t be opened right now because it’s being used by another task, such as moving or copying an item or emptying the Trash. Try again when the current task is complete.
How do I delete this photo from my desktop?
Thanks!I ended up shutting down my system, and when I started it back up, I was able to drag the photo to the trash and delete it (I did get a message warning that my deleting the photo might negatively affect the application that was "using" it, but I deleted it anyway...it worked...and I'm hoping I didn't adversely affect another application!).
Thanks so much for your help! -
Hi, since I've bought the iphone, my facetime never works, I just can't activate the facetime in settings, when I put it on, after some time, the phone shows the message: activation unsuccesful. Do you guys know what should I do?
Where are you, what network are you on and where did you get the phone?
If you are on an unsupported network, Facetime may never be able to activate. If the phone originated in a different country, facetime is probably trying to send an International text message to activate. If you don't have International text messaging, it will fail. -
I have three dvds that play in a dvd player. One of the three plays in my imac but the other two say they are blank. How do I get my imac to read these other two dvds?
My iMac is very picky about any dirt or smudges on the DVD.
-
Hi all,
I have PDF files that I put on my Mac iBook application, how do I sync them with other devices?Hello there, Dhamin.
The following Knowledge Base article has some great information on this very topic:
iBooks: Viewing, syncing, saving, and printing PDFs on iPhone, iPad, and iPod touch
http://support.apple.com/kb/HT4227
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro -
When I add a new bookmark, and the (star) Page Bookmarked window appears - is there any way to expand the size of that window so that I can see my entire list of folders when adding a new bookmark to an existing folder? The endless scrolling technique is far too tedious when trying to add a new bookmark, because the window is simply too tiny. Is there maybe a plug-in that will let me grab the corner of that window and re-size it? Thanks!
I suggest you install the "Add Bookmark to Here2" extension, then you can expand the the list but you will not see the bookmark itself in the list if that is what you wanted. At the top you have three major folders you can select one of them and scroll up and down. Below that you have your most recently used folders and you can select one of them instead and scroll up and down. You can see the folder the bookmark is in -- they get added to the bottom
If you really want to see the bookmark within the folder the same extension allows you to bring the bookmark to the folder from say the bookmarks sidebar that is why it is named as such. I use it but mainly i use the dialog.
Please continue reading about bookmarks and some related extensions at
* http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
* https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/
* http://dmcritchie.mvps.org/firefox/firefox.htm#addbookmarkhere2
* http://dmcritchie.mvps.org/firefox/kws.htm
If you are not using tags at all, you can remove a whole lot of confusion by removing them from the dialog via the extension. -
I have installed HP2035n. But when i try to open the embedded web server, i get the error "Firefox doesn't know how to open this address, because the protocol (fe80) isn't associated with any program." What is the possible solution?
I typed in the IPv6 address of the printer in the address feild of firefox.Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Do a malware check with some malware scanning programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked -
I have Firefox pinned to the Task bar in Windows 7. when I open firefox I get an extra firefox icon in my task bar while having firefox open. It used to show as being open on the icon that is pinned to the task bar
# Click the pinned icon to launch Firefox.
# Right-click the pinned icon and choose "Unpin this program from taskbar".
# Right-click the Firefox icon and choose "Pin this program to taskbar". -
TS1702 I have three apps that I tried to update and now they are stuck in waiting how do I fix this
I have three apps that I tried to update and now they are frozen any ideas on how I can fix this
You can try any or all of these suggestions that have worked for others in the past .... But ... YMMV.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad. -
i'm updating my iphone4 to ios7 then my phone suddenly won't open. it only appears the itunes logo. what does that mean?
It means your phone is in recovery mode and you will need to restore it:
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Cheers,
GB -
i am trying to updat to 5.0 i have the latest version of itunes but it bring up the error 3194 and i have tried everything that it suggested includeing removing itues and reinstalling it i did get an error when it updated but dont know why and what for
sorry i was typing fast and didnt check spelling and stuff
Maybe you are looking for
-
Embedded PDF object .postMessage doesn't work with Reader DC on IE
In our application, we have PDFs embedded in the browser with an object tag such as this: <object id="pdfObject" width="100%" height="100%" type="application/pdf" data="#{url}"></object> There are HTML/Javascript controls on the page which communicat
-
AAE proxy to file configuration using IE
Hi, I am using PI 7.1 Ehp1 and working on ABAP prxy to File scenarios and does not involved any mapping or ESR object. I used Integrated Configuration for the same to bypass the IE. So it should use AAE processing for sender and receiver procssing.
-
Import PO Receipts using custom conversion.
I am importing PO Receipts through a custom conversion by populating the PO Interface tables and running the receving Transaction processor. But when I look for the receipt in the application, I cannot find it. The receipts correspond to existing App
-
hi, I have a score with different time signatures: 3/8, 4/4, 7/7, 5/16, etc. Every time I press command+Z logic erases nearly all of my time signatures (and the last action I wanted to "undo" it isn't of course the addition of the time signatures log
-
Premiere Pro CS4 won't boot - keeps crashing when trying to load VST plug-ins
This problem has been a thorn in my side for ages - after a recent software update to some of my VST plug-ins, Premiere Pro will no longer boot. I have to re-name the VSTPlugins folder to a different name. It used to be that it would scan the VSTPl