I have to guess where the comma is the @ sign is and various signals now tell what am i doing wrong on the apple usb keyboard

Hello
This can be verry usefull
http://support.apple.com/kb/HT2841?locale=en_US
How to identify keyboard localizations
HTH
Pierre

Similar Messages

Disappointed with my new Ipad. Cannot get youtube videos to run. Videos run great on my Dell and Acer A210 tablet. What am I doing wrong on the Ipad?

Cannot get my new IPad with Retina Display to run Youtube videos. The IPad did run two videos but then it refused to run another video. I have a Dell Inspiron and an Acer A210 Tablet that ran the same video I was trying to run on the IPad. The Ipad just keeps trying to load the video, but never runs it. Very disappointing since this is my first Apple product. Any solutions to this problem?

What app are you using for the YouTube videos on your iPad? If trying to view in Safari it is likely that the videos not running use Flash. This is quite common and the iPad will not run Flash.
I use the Jasmine app for YouTube and have experienced no problems viewing videos.

I have had my Apple TV for 3 days now and the movie I wanted to rent still hasn't loaded. What am I doing wrong?

I have had my Apple TV for 3 days now and the movie I wanted to rent still hasn't loaded. What am I doing wrong? The movie is only 1hr 33min but says it'll take over 4hrs to load.

AppleTV rentals are fixed size, and don't degrade quality if the connection is slow.
Minimum suggested requirements for 'instant' streaming are:
SD 2.5Mbps
720p HD 6 Mbps
1080pHD 8 Mbps
Any slower for the content quality selected (Settings iTunes store) and AppleTV has to partially download the movie in order to play through without rebuffering, and that can take anything from minutes to hours depending on internet speed and actual 'file size'.
The problem you see is usually related to slow intermet (very slow LAN connection from your router is rarely an issue but could be if AppleTV is not getting good signal).
On a computer use speedtest.net to test your internet speed.
When I has a 1 Mbs it would take 8-10 hours to download an SD title.
With 4.5 Mbps it take 15-30 minutes to play 720p movies, longer for 1080p.
A big flaw with AppleTV for those with slow connections is the limited hardware and memory - if you get bored waiting for the movie to start and use AppleTV say for YouTube. streaming from your computer iTunes or merely browsing the store trailers this can be enough to delete the portion of a rental already downloaded forcing it to restart each time you use it for something else.
If you turn out to have slow internet an alternative is to rent in iTunes on your computer, then once fully downloaded you can play on AppleTV under Computer>your iTunes>Rentals (only appears when a rental is on the computer ready to play). Alternatively lower rental quality settings from 1080p>720p>SD in future if you need faster starts.
I have also seen issues recently on some of my units where it starts downloading well, but for some reason freezes and refuses to fetch the rest unless I play from the start - this is usually after I've played and paused a rental a few minutes in and I've confirmed it just stops fetching more data sporadically - it never used to do this.
AC

No sound. Mute is not checked, volume all the way up on iTunes and on status bar. What am I doing wrong or missing? I restarted last night and it worked before that but not since, any one have any ideas?

No sound. Mute is not checked, volume all the way up on iTunes and on status bar. What am I doing wrong or missing? I restarted last night and it worked before that but not since, any one have any ideas?
Thanks, Rob

First off did you go to System Preferences > Sound > Output > And is the correct output selected?
Any red light coming out of the headphone jack? If so, you'll need to re-set the little switch in there by inserting a 3.5mm jack carefully in & out 20 odd times. Or grab a toothpick (non-conductive) and a flashlight.
Tried anything else that produces a sound? On restart do you get the chime? Perhaps check into Audio Midi Setup to ensure your output is selected correctly using the cog at the bottom left.

HELP - hi with apple Configurator why does it show with a yellow triangle on the right side of the screen what am i doing wrong for the ipads not syncing or whatever and how do i fix that?

HELP -- hi with apple Configurator why does it show with a yellow triangle on the right side of the screen what am i doing wrong for the ipads not syncing or whatever and how do i fix that? although i have looked online to try and figure it out and here is the website i found is this the stuff i need to do to fix this? is this site what i need to do to fix this? http://edtechstandish.wordpress.com/what-ive-learned-about-apple-configurator-so -far/ Thanks

Sorry but I don't know anything about this. But you might have better luck posting this question over ing the iPad in Business and Education forum here: https://discussions.apple.com/community/ipad/ipad_in_business_and_education?view =discussions.

What am I doing wrong with the _ visibility property?

I have an object that is a movie clip, and I want this object to disappear when you click on him, but also the button that makes the object to appear to make also the object to disappear.Either way, when you click on the object or on the button the second time, the same object to disappear. I managed to do that, but the first time when you click the button in order to make the object appear it dosen't work, you have to click twice.What am I doing wrong? The object it's a movie clip named frez1, and the button is named fr1. I put this codes in the main timeline:   for the movie clip :           frez1.onPress = function(){                                      _root.frez1.gotoAndStop(2);                                      _root.frez1.gotoAndStop(1);                                           } for the button:          frez1._visible = false;                                     fr1.onRelease = function(){                                  frez1._visible = !frez1._visible;                              }   The button and the object are on different layers. Thank you for your help.

Oh sorry, only now I have seen how it has been displayed. The codes are like this: for the movie clip: frez1.onPress = function(){
                                                                                                                                                            _root.frez1.gotoAndStop(2);
                                                                                                                                                            _root.frez1.gotoAndStop(1);
                                                                                                                                  for the button:   frez1._visible = false;
                                                                                                                                                         fr1.onRelease = function(){
                                                                                                                                                         frez1._visible = !frez1._visible;
Yes the movie clip switching between frames and 1-2 it is turning him invisible.
So in order to make him go between this two frames I have to put the visibity property and not the root ?
Thank you

Since I've upgraded to Maverick the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

Since I've upgraded to Maverick on my Macbook Pro the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

I have over 250G backed up and I really don't want to reset everything and start again.
Not sure what you mean here.
A reset will not affect any of the data on the Time Capsule hard drive. You would have to perform a completely separate and very deliberate Erase Disk operation for that to occur.
I'm not recommending that you perform a default reset, but it is an option if there is really nothing else to try.
I don't know if what you are seeing is a Mavericks issue or not, since I refuse to use any new software until at least the first major update with fixes comes along.
Another user may be able to offer more input on Mavericks.

I recently purchased a MacBook Pro Retina Display. In addition, I picked up a USB Superdrive. It appears the Superdrive does not want to accept my discs and just ejects them. What am I doing wrong?

I recently purchased a MacBook Pro Retina Display. In addition, I picked up a USB Superdrive. It appears the Superdrive does not want to accept my discs and just ejects them. What am I doing wrong?

You should also ask this in the MacBook Pro forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

II am exporting a song to disc. The mix down is playing back in a different key. What am I doing wrong, or how do I get Garage bane to mix down in the key the song in which the song is recorded?

I am exporting a song to disc. The mix down is playing back in a different key. What am I doing wrong, or how do I get Garage bane to mix down in the key the song in which the song is recorded?

Three basic steps to get you started:
You set the tempo and Rhythm when creating your project:
Launch GarageBand and and select "New Project" from the panel: Pick a suitable template, for example "Song Writing":
Then, in the next panel that opens "New Project from Template" select a folder and a name to store the project and set the basic parameters: Song key, tempo, signature; for example for a song in C-major, 4/4, 100 beats per minute set it like this.
If you later want to speed up the song or slow it down, use the LED display at the bottom of the window. Click on the leftmost icon to change it to show the metronom for "Project View" like this. Then you can change the basic settings:
Regards
Léonie
P.S. The GarageBand Help - accessible from the main menu bar "Help > GarageBand Help" or ⌘? is quite good and should get you started easily.

I'm reading a pdf in ibook and it takes up the whole screen so I can't manage it... what am I doing wrong?

I'm reading a pdf in ibook and it takes up the whole screen so I can't manage it... what am I doing wrong?

its ok now...

Cannot home share the game app purchased at iTunes store. Home sharing music works. Home sharing books works. But, when I try to copy the game app, it says my computer is not authorized. What am I doing wrong?

Cannot home share the game app purchased at iTunes store. Home sharing music works. Home sharing books works. But, when I try to copy the game app, it says my computer is not authorized. What am I doing wrong?

I've been struggling with a similar issue myself and just figured it out. Some of my content had been purchased with an older Apple ID that I don't use any more. When I authorized my second computer, I only authorized it for my new Apple ID, not my old one. When I tried to copy my library to the new computer, many songs, apps, etc. reported the error "could not be copied because this computer is not authorized". It drove me crazy because I knew the computer was authorized and much of my library came over just fine.
Finally I selected some of the problem items, selected "Get Info" from the menus, and saw that they were all purchased by my old Apple ID. I then authorized my old Apple ID on my new computer, and all of my files are copying correctly now.
Would be great if the message said something like "...because this computer is not authorized for Apple ID [email protected]"

I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... What am I doing wrong?

I am trying to extend my airport extreme signal to another airport extreme can this be done? I have tried several time using the automated set up but it keeps failing... I have selected every possible security/password encryption level... What am I doing wrong? If it os possible where can I find step by step instructions? Please & Thank you!

The challenge with the older round AirPort Extremes are that they are "g" wireless devices.
When you configure them for WDS, the speed on the wireless network is cut in half...and probably will not have the bandwidth required to stream video reliably from either AirPort Extreme since both are affected by the WDS setup.
There is not an "automated" setup for WDS. You have to do this manually on both AirPort Extremes. Unfortunately, it is not an easy configuration and it's easy to make a mistake and hard to recover without starting all over again.
Apple's instructions for WDS are here if you want to give it a try.
http://support.apple.com/kb/HT4262
It is possible that it might work. Keep us posted on your progress
Adding a single AirPort Express will unfortunately not help. You have to have "n" wireless devices at all router points.

With iOS 6 on my 4th gen iTouch I am finding I no have to delete the playlist from my iTouch, not the when I sync. Now the paylist is being deleted from my library as well. What am I doing wrong?

With the new iOS 6 I have to use on my old iTouch (4th gen) instead of deleting a playlist thru the sync, I was instructed to delete it on the device. Now when I sync I am finding the playlist has been deleted from the library as well. I just want it off teh device, not erased. What am I doing wrong?

See these previous discussions:
Waiting applications: Apple Support Communities
Downloading apps stuck on waiting...: Apple Support Communities

I received an itunes store gift certificate. When I try to redeem it, the screen says Session Timeout. I have entered and reentered the certificate code, but Session Timeout comes up each time. What am I doing wrong?

I received an iTunes gift certificate for Christmas. When I try to redeem it, a window comes up saying "Session Timeout." I have signed out, signed back in, tried again, and when I enter the code and press Redeem, the "Session Timeout--Your session has timed out. Try again." message pops up. What am I doing wrong?

Clic here: iTunes: Advanced iTunes Store troubleshooting
Then click: Expand All Sections
Then scroll down to error 5002.

An mp3 file on my computer will not import to itunes by either the drag-and-drop or the Add File to Library method. Can't figure out what I'm doing wrong. My OS is Windows 7.

I purchased an mp3 from a private website on my laptop. The itunes library i sync ipod to is on my desktop, so i copied the mp3 onto a flash drive and then into my desktop in the Downloads folder and Desktop folder as well as the itunes music folder, 3 places. I opened itunes on the desktop and read the instructions for importing music that's already in my computer. Neither the drag-and-drop or the Add File to Library method works. I've tried both ways over and over. Cannot figure out what the problem is. I do note that the name of the mp3 file doesn't show the .mp3 extension, it appears as simply it's title, Eating Healthy, without any extension at all. Could the filename be the problem, or do you have any other idea what I'm doing wrong? My OS is Windows 7, using IE9. Thanks.
ADDENDUM AFTER READING ANOTHER DISCUSSION HERE: I have now tried right clicking the song in Windows Explorer and choosing Open With, clicking itunes. The mp3 plays in itunes but does not add to the library.

I don't have a Recently Added playlist. However, I discovered that the file I had named Eating Healthy was given the name You Can Enjoy Eating Healthy when it copied to iTunes. I'm guessing iTunes pulled the full name of the piece from the internet. Upshot--the mp3 did transfer to iTunes on all 3 tries, but I was looking in my alphabetized list under E, not Y, so I didn't see it there. Thanks for your help.

I have to guess where the comma is the @ sign is and various signals now tell what am i doing wrong on the apple usb keyboard

Similar Messages

Maybe you are looking for