I have two graphics cards in my PC . after I had to reinstall windows again has been slower pc and stuff not play 4k footage . Can you help me find out about it " Raks " graphics card has stopped working ?
I have two graphics cards in my PC . after I had to reinstall windows again has been slower pc and stuff not play 4k footage . Can you help me find out about it " Raks " graphics card has stopped working ?
I'm not aware of any, not to say that there aren't any issues.
it may have nothing to do with ntpd, there are a lot of things running.
ntpd just happen to make the log entry at the same time as the panic.
I would check to see if there are any updates available for you system.
if this is the first time that this has happened. it may be (pick one):
cosmic rays
sun spots
the trilateral commission
if this happens more frequently and that traces look the same, then
there may be a real problem that needs to be looked into further.
Similar Messages
-
TS1363 hi my iphone 4s has cashed and will not turn on ? can you help
hi two days ago my iphone 4s crashed and now will not turn back on ?can you help
Press and hold both the Home and Power buttons until it restarts.
-
I have an ipad3 which has been spontaneously restarting and is not connecting well to either mobile service or wireless networks. It has become unusable. Is there a software update to fix this issue?
I have tried removing and reinserting the sim card - I am not even being asked to put in the sim pin to unlock the sim
I have reset the network settings and reconnected to my wireless network. I can get onto the wireless network but the ipad does not connect to my carrier even though my mobile phone (same carrier) has great service.
It seems to me that due to the connecton issue the ipad then restarts itself so I cant even use it for the local apps that do not require any connection to run because every few minutes the unit reboots.
heading to an istore tomorrow to have it looked at but wondered if there is a software upate or setting I can change myself to fix this isse.
not happy after the cost of the unit and ony had a few days use before the issues started!Thanks Alan,
in the end it was replaced at the Apple iStore, they restored factory settings and it was still playing up for them too. Weird but the replacement is working perfectly!! -
IPhone 5
I have an app that appeared to need to be updated. I clicked to update three days ago. It has started to update and will not finish. How can I delete the app while its in the middle of updating?Locked on an update can mean a couple of different things. So there are a number of things to try, but start with these.
If you have a "waiting" icon, try tapping on the icon and see if you can pause the update/download. Of it pauses, tap on it again and see if it will resume.
Try holding down on the icon until all of the icons on the screen wiggle. If the X to delete pops up on the waiting/stalled app - tap the X to delete the app. Tao,the home button and the apps will stop wiggling.
You can also try this and see if the downloads will resume. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
i tried to update my ipod but then it didnt work saying that an unknown error has occured, now itunes is not recognising that an ipod has been plugged in and the picture that comes up when you first get it (an arrow leading to the itunes sign) is on my screen, i dont know what to do?
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software. -
every time i sync my i phon to the itunes there is a message show to me when i tranzfer some pic or music itune had stop working because there is a problem and the widows close the porgrame can you help me please
It means that you need the latest version of Mountain Lion or Mavericks to run Logic Pro X.
-
Since upgrading my Mac book pro with Yosemite, I have problems with my Xerox Work Centre 3045 printer. The printer works normally but it does not recognise scanner, I can not scan anything. Can you help?
Open Disk Utility and select your hard drive, then Repair Permissions, it will probably return a very large number of errors, primarily printer and library errors, so run it a second time. Then restart the MacBook Pro. If it still will not scan, try using Image Capture from Finder > Applications and see if that will work. If not, contact Xerox about updated drivers.
-
Hello, we have both Creative Cloud membership and Creative Cloud for team. Can you help me with the difference and if i need to have both? We have 9 employees that are using it. Just not sure if i'm paying for something i don't need.
Thank youPlease refer to Creative Cloud Help | Creative Cloud / Common Questions
CC is for retail use with 20 GB of storage space, CCT is where number of seats are purchased & assigned by one program admin where each seat gets 100GB of storage space.
You can not have both the CC & team in one account as it will only provide you added storage space of 120 GB but you can activate the CC any of them or either of them twice as CC is based on Adobe ID.
Regards
Rajshree -
I have iphone 4s and i want to unlock it can you help me ?
I have iphone 4s and i want to unlock it can you help me ?
Help is here, karason! Are you looking to unlock your phone for global use? If so, is it active on your Verizon Wireless account? You can review our unlocking policy here: http://vz.to/1v6UdcH
AndreaS_VZW
Follow us on Twitter @VZWSupport -
hi, i'm having great difficulties with my safari on my laptop it will not open at all and has been doing this for quite a long time now, can anybody help??!!!
What laptop? What operating system? What version of Safari?
-
Ever since I downloaded IOS 8 my IPad has been slower, stalling and now it completely crashed and I can't turn it on at all! It's the Ipad 2. Is there anyway I can do?
Hey Basketsopugs,
Thanks for the question. I understand you are experiencing issues with a third-party application after the iOS 7 update. The following article outlines the best procedure for troubleshooting this issue:
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Thanks,
Matt M. -
I have an iphone 4 n it is getting switched off automatically n switches on automatically , also it increases d volume by itself. Its a 1year old phone n the version is 4.3.2(8H7). Also the volume sign does not go off from the screen. Can anyone help me find out if its a hardware problem???
Do you have a case on your iPhone? It could be pressing the buttons on the iPhone and causing it to restart or behave unusually.
This Apple doc will help you find out if there is a hardware or software problem -> iPhone: Hardware troubleshooting
You can always contact Apple and setup service through Express Lane. -
I can't find it on my plan. But can ya help me find out if I still have m2m calling?
I can't find it on my plan. But can ya help me find out if I still have m2m calling?
What plan you have???
Most all plans have M2M which means Verizon to Verizon Wireless calls only. Not to other carriers subscribers. -
Why is my audio recording that has been burnt to CD-R not playing on other audio equipment - its says no file or cant play.
What is the correct steps for burning the CD. I followed the help guide and done excatly what is said.
Can someone please help?
Thnks.did you burn it as a CD for audio CD players....or as a data disk? big difference.
Also could be the media type (seen that issue endless times)....... try a diff. CD media. There are countless burn layers and CD blank media, no player or burner on earth can read or write to them all.
burn another blank CD to make sure it wasn't a bad CD,.......reject ratio on bad CD and DVD is about 5-15% depending on type.
Ive burned enough reject DVD and CD to fill a house -
Hi, i just want to know if theres any way to just stop the erase all data and settings for my iphone 3gs it has been 4 hours and it still havent finished yet, still showing the black screen with an apple icon. Im getting so frustrated, is there any way to just stop the process and roll back the changes made? Would it do any harm if i press on my home key and power button the same time? Thanks!
Something has gone wrong, on an iPhone 3Gs the erase all operation should be instantaneous. Disconnect your phone & force it into recovery mode:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, select "new".
Maybe you are looking for
-
JMX unregister MBean does not work?
Hi, I'm registering MBeans with the following code: final ObjectName name=new ObjectName("management:type=MyBean"); mBeanServer.registerMBean(name); When I run jconsole, I can see those MBeans being added to the registry (each call results in a new b
-
I am using windows 8.1 my itunes close down if i try and go into the itunes store. my icloud works for about 5 minnutes then stops. i have deleated itunes and cloud and reloaded both and they still fail.
-
Help needed in SQL performance - Using CASE in SQL statement versus 2 query
Hi, I have a requirement to find count from a bunch of tables. The SQL I have gives the count of all members. I have created 2 queries to find count of active and inactive members. The key difference is only the active dates. Each query takes 20 seco
-
Why do we create Sample Account
Hi, I am practicing creating GL account. Somewhere in the documentation it talks about creating Sample Accounts. Why do we create Sample Accounts? How is it used in real life scenarios?
-
Credit check status in MV45AFZZ
Dear All expert, I want to do update a custom table in MV45AFZZ when the order passed credit check. But I do not know , is there any indicator about the result of the credit check? I mean some field or table stored those kind of data. Many thanks in