I have two iMacs wired to an airport. I have just updated both to Lion. I am unable to share the printer or scanner with the other machine. Any suggestions

I have two iMacs wired to an Airport. I have just updated both to Lion. I am unable to share my printer or scanner now. Any suggestions

I have the exact same problem, Grace Period is ignored when setting it in Profile Manager for an iPhone.
I'll try to verify that this is also a problem with iPad's.
/ Andreas

Similar Messages

HT3500 i have a mac pro and have connected to my wireless canon printer. I was able to print but now the printer comes up with the paper in the tray is the wrong size. but the paper is A4. does any one know what is wrong.

I have connected to my wireless canon printer but it wont let me print from my mac pro. printer comes up with the message that the paper size doesnt match the printer settings. I have tried to change the settings on the printer but that didnt work. can anyone help

Well... no help was found here.. so I abandoned the wireless- ness of my printer. I bought a
small 10 port hub because only 2 USB ports really isn't enough with wireless mouse, wireless internet
and any kind of printer. I also bought a long USB cable. I now print--wired since this can be done
as an alternative to wireless with this printer. Because I don't want a cable "hanging around"
when the printer is not in use, I simple disconnect it and reconnect when I want to print.
It's a temporary solution others may find helpful as well. Apparently there's been a lot of
confusion and problems getting this printer set up wirelessly with our MacBooks.
Shame on HP for not helping us out!

My iBooks just deleted a handful of my pdfs without a sync on my iphone 4s with new OS7. Any suggestions? I have not backed up or updated anything since just in case.

My iBooks just deleted a handful of my pdfs upon opening, without a sync, on my iphone 4s with new OS7. Any suggestions? I have not backed up or updated anything since just in case.

Happened to me on an iPad after updaing to iOS 7.0. All PDF's synced to iBooks disapperaed. I just connected to iTunes & synced them back...they all then were shown as new. Noticed I had to re-select them all, in iTunes, in order to sync them back.

My IPad screen is dark and will not turn on. I have charged the battery and nothing. I have tried to reset the device as well with no luck. Any suggestions?

My IPad screen is dark and will not turn on. I have charged the battery and no luck. I have tried to restart it multiple times with no luck. During the restart, the screen will flicker like it is trying to restart but the silver apple never shows. Any suggestions?

Please tell me that it has NEVER been jailbroke. If it has never been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

HT1150 I have an iBook G4. My epson stylus printer is not fixable so I went to Best Buy and bought an XP400. It is all set up but I can't get the printer to communicate with the computer. Have tried everything I know and it won't work. Any ideas?

I have an iBook G4. My epson stylus printer is not fixable so I went to Best buy and bought an XP 400 (Epson). When I went to set it up it wouldn't talk to my computer. So it looks great but won't print After 2 days and many phone calls I am disgruntled to say the least. Any suggestions?

I would imagine the drivers supplied with the printer will not be compatible with your existing operating system.
Download the older drivers for your OS here, and then try the install again.
Epson Print Drivers

My two iMacs frequently go offline when I have our iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices no problem. Any thoughts on this?

My two iMacs frequently go offline when I have my iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices the offline problem stops. Any thoughts on this?

.....doesn't that seems to suggest the modem?
That is what I have suggested....twice now. From posts above:
My opinion would be that it is likely not the ISP, unless you have complete loss of Internet service for all devices at the same time......it is the Comtrend device....
and
I believe that the problem lies with the modem, and not the ISP signal.
Your ISP will likely have a different opinion, though. Please keep us posted on your progress.

I have two iMac 24" how can i run them as one machine

im trying to figure out how to connect my two 24" to opertar as one machine if any one has the answer please help thanks

Are you referring to use the display of one with the other Mac or are you referring to use the hardware of both computers into one?
If you are referring to this first option, you have to use an application like ScreenRecycler, because only 27-inch iMacs and iMacs with Thunderbolt can be used as an external display officially.
If you are referring to my last option, you can't do it

We have two IMac computers. Do I need to purchase two upgrades to Lion or can I use one upgrade on bo†h on my computers?

I have two IMac computers. Both running the latest version on Snow Leopard. To upgrade to Lion, do I need to purchase two upgrades or can I use one purchase for bo†h computers?
Thanks,
Alice

As I understand the as yet unconfirmed rumor by me, is that once you pay for a single copy of Lion, every computer you have that's authorized under your Apple ID can download it, no limit on number.

I have 2? How do I sync selected photos from my IPad to my IMac w/o losing all photos on my IPad and getting the phoos o my IMac. ou see I have two IMacs with different sets of photos. Also want to convert all Apple works docs to pages docs on my IMac.

I have 2? How do I sync selected photos from my IPad to my IMac w/o losing all photos on my IPad which will be replaced with the photos on my IMac.You see I have two IMacs with different sets of photos. Also want to convert all Apple works docs to pages docs on my IMac. Is there and app available to do the former. many thanks. b

The iPad and related software is designed to sync with only one computer. I suggest transferring the photos from one of your iMacs to the other so that all photos are on one Mac. Same for all other files you want to sync over.
To get those AppleWorks files to the iPad you'll have to determine if Pages will open them. If it will then use the file sharing feature of iTunes to copy them to Pages on your pad.
If Pages will not open the AppleWorks files directly you'll have to save them in some format that Pages will read. These include but may not be limited to Pages and Word formats.

I have two iMac's one running 10.6.8 and the other 10.8.2 What Apeture program should I purchase?

I have two iMac's one running 10.6.8 and the other 10.8.2 What Apeture program should I purchase?

You can currently only buy the current version Aperture 3.4.3 at the AppStore, and that version requires MacOS X 10.7.5. at least, see the release notes: Aperture 3.4.3
So you will not be able to install this version on your Snow leopard machine. Maybe you can buy a boxed retail version of an earlier release, compatible with Snow Leopard, but the newer version is faster and compatible with iCloud.
Do your iMacs both have the same processors and memory? You will wan to use your fastest mac with the best graphics card and the most RAM to run Aperture, also a large screen would be desirable.
Regards
Léonie

I have two imacs in different rooms and Safari started crashing immediately after opening on both machines. latest version is installed.Any ideas?

I have two iMacs in different rooms and Safari started crashing immediately after opening on both machines. latest version is installed.Any ideas?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

TS3048 I have two iMacs 6 feet apart. One has no problem connecting to the wireless mouse and wireless keyboard. The other can"t seem to find either device.

I have two Imacs 6 feet apart. One has no problem connecting to the wireless mouse and keyboard. The other indicates it can"t find it"s wireless mouse and keyboard.

Hello:
A Bluetooth device may only be connected to one thing at a time.
Barry

I have two iMac's on the same desk. Once iMac pairs with both keyboards and mice. The other pairs with the mouse, but I cannot get the keyboard to connect. How do I get a keyboard and mouse to connect to each iMac independently?

I have two iMac's on the same desk (about a foot apart). One iMac pairs with both keyboards and mice. The other pairs with the mouse only; I cannot get the keyboard to connect. How do I get a keyboard and mouse to connect to each iMac independently?

Antaeus00 wrote:
I tried sending a request for help,
But did you succeeed in sending a request for help?
Did you receive a response? How long has it been since you sent a request?
but I need someone with more authority to talk to.
There is no one with more authority than iTunes store support. We herem are only users.

I have an iMac with 10.4.11 and a Mac Air 10.6.7. Will the Extreme be compatable with the 10.4.11?

I have an iMac with 10.4.11 and a Mac Air 10.6.7. Will the Extreme be compatable with the 10.4.11?

10.4.11 Macs will have Kernel Panics when trying to use Dual Band Airport Extreme Base Station. There are a few forums here dealing with it. I just purchased an Airport Extreme Base Station and spent two days now figuring out why the old iMac G5 running 10.4.11 (Tiger) was Kernel Panicing. There is a way that I am testing now that seems to be working. I will post the link in a minute when I find it. Other solution is to upgrade to 10.5 .
Here is the post
Aug 22, 2010 2:09 PM (in response to Acin)
Greetings... I have just found a resolution to this problem, at lease if you're using one of the newer Dual Band Airport Extreme base stations. This fix was provided by an AppleCare representative named Rebecca, and I am deeply in her debt. To review: MY PROBLEM - After installing a new Dual Band Airport Extreme in July 2010, I began to have frequent kernel panics with my older laptops running Tiger (10.4.11). My newer Intel/Leopard MacBook Pro ran fine with the new base station, but these older Power PC Macs with Tiger just crashed again and again. Pulling the Airport Card was the only fix. I tried every conceivable software and network fix; nothing helped. THE SOLUTION - The AppleCare rep talked me through this, but I'm pretty sure this was the procedure. Please note that I cannot guarantee that I have not forgotten a step! But I am fairly sure this is it. (If an Apple specialist is reading, please check this!) Keep in mind, this will only work if you have a dual-band Airport base station. I performed this on a Mac Pro running OS 10.6.4, with Airport Utility version 5.5.1 and firmware 7.5. 1. Launch Airport Utility.
2. With the dual-band base station selected, click Manual Setup.
3. Click the Wireless tab.
4. Click the "Wireless Network Options" button near the bottom.
5. Check the box that says "5 GHz Network," then enter a new network name in the Name field. (Your existing network name appears there now. Just delete it and type a new one.)
6. Click Done. That dialogue will close.
7. Now click Update. The Airport base station will now take about a minute to reboot. Here's what happens when you perform these steps... The utility changes your existing Airport network to 2.5 Ghz, and then creates a new 5 Ghz network with the new name. (It will apply the same password to both.) You will use the 5 Ghz network, the new name, for any new wireless computers using Leopard or newer OS. You will use the 2.5 Ghz network (bearing the original network name) for the older laptops running Tiger. This fix worked immediately, no problems. The issue is that Tiger does not perform well with 5 Ghz networks, and this causes the kernel panics. I now have two old G4 laptops running Tiger, both using my new Airport base station with the 2.5 Ghz network and running perfectly. At the same time, my new machine is using the 5 Ghz network at the same time. It seems quite stable. Good luck, and I hope this info is useful.

We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help..

We have an older IMac (preIcloud) and just purchased a new Macbook Air. Our Iphones are set-up to synch with the IMAC and my calendars on the IMac & the phone look the same. But when I open ICal on the MacBook Air my calendar is missing items? Help.

Are you wanting to import iCal to the MacBook Air. Since iCloud doesn't work with 10.6 OSX you probably don't have any data in iCloud yet?

I have two iMacs wired to an airport. I have just updated both to Lion. I am unable to share the printer or scanner with the other machine. Any suggestions

Similar Messages

Maybe you are looking for