I have windows and since the newest update to itunes, it just freezes pretty much when ever i try to do anything with it.  Does anyone know how to fix this problem?

Every time i try to do anything with itunes it freezes after a few seconds and i have to force it to close.  Does anyone know how to fix this problem?  Im aweful with computers and have tried everything i know of.

Hey newyearnorma,
Thanks for using Apple Support Communities.
It sounds like iTunes has been freezing on you, take a look at this article to troubleshoot.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Have a nice day,
Mario

Similar Messages

  • HT5312 Every time I do all the steps to reset the questions the only problem I have is that I noticed in the link to reset them using an email the email in the link don't match the one I created my account with. Does anyone know how to fix this problem?

    Every time I do all the steps to reset the questions the only problem I have is that I noticed in the link to reset them using an email the email in the link don't match the one I created my account with. Does anyone know how to fix this problem?

    You won't be able to change your rescue email address until you can answer your questions, you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to upadte your rescue email address for potential future use

  • My ipad is not being recognized by the new iTunes update that just came  out about a week ago it worked fine till the update I have windows 8.1 does anyone know how to fix this problem and I just bought my ipad mini about a month ago

    My ipad mini is not being recognized by the new iTunes update that just came  out about a week ago it worked fine till the update I have windows 8.1 does anyone know how to fix this problem and I just bought my ipad mini

    I found this is another thread - same issue.
    Re: iTunes has stopped working. Why? 
    Sep 11, 2013 6:07 AM (in response to thurdy)
    Resolved!
    After contacting Apple, I received a reply from their engineers:
    Copy QTMovieWin.dll from:  C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    to: C:\Program Files (x86)\iTunes
    And that did the trick.
    Message was edited by: Stryder777

  • I have been watching videos from my ipad via ATV2 with no problems.  As of yesterday my videos just keep loading and don't play.  I don't think I have done anything differently.  Does anyone know how to fix this.  I have tried unplugging it

    Hi, I have been watching videos from my ipad via ATV2 with no problems for over a year.  As of yesterday my videos just keep loading and don't play.  I don't think I have done anything differently.  Does anyone know how to fix this.  I have tried unplugging it waiting 30secs and then plugging it back in.  I have tried restarting, updating and reseting but nothing is working.  It's quite frustrating!!!! Any suggestions????

    I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

  • I downloaded the 64 bit version of itunes and plugged in my ipod touch but a sign pops up and says i need the right software for the ipod to connect which is 64 bit.  Does anyone know how to fix this problem?

    I downloaded the 64 bit version of itunes and plugged in my ipod touch but a sign pops up and says i need the right software for the ipod to connect which is 64 bit.  Does anyone know how to fix this problem?

    Hi alexanderfrommilton,
    First try reinstalling itunes.

  • Since upgrading to IOS 8.1.2, I cannot send/receive emails from either of my Apple or Verizon email accounts.  Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

    Since upgrading to IOS 8.1.2 on my iPad3, I cannot send/receive emails from either of my Apple or Verizon email accounts.  I confirmed that my internet connection is working. Does anyone know how to fix this problem or how to go back to IOS 8.1.1?

    Hi Milrclan,
    Thanks for contributing to the Apple Support Communities. 
    If you're not able to send or receive email from the mail accounts on your iPad after updating iOS, start with these troubleshooting tips:
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Best Regards,
    Jeremy 

  • My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

    My UR12 Steinberg interface is recognized by Yosemite but I can't get any output from the device, does anyone know how to fix this problem? Thanks in advance

    Apparently it's related to the Firefox plug in.
    This isn't exactly a solution but more of a way to avoid opening PDFs with Firefox's plug in.
    1. Highlight "Tools" from the Menu Bar in the top left of the screen (or click "Options" if using the Firefox Compact Menu)
    2. Select to "Options
    3. Select "Applications"
    4. Look for "Adobe Acrobat Document" under Content Type and to the right under Action select "Use Adobe Reader (default)" instead of the using Adobe Acrobat in Firefox
    5. Open a test PDF. It should open in it's own window now.
    Again, not a complete solution but something that'll at least let you scroll with PDFs open.
    More info here: http://forums.mozillazine.org/viewtopic.php?f=38&t=2171033

  • I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

    I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?

    What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
    What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now?

  • My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?

    My iphone dosen't doesn't make key tone sounds anymore when I write a text message or when I want to dial a phone number I don't know how to fix this problem, I don't hear the clicking noise anymore does anyone know how to fix this problem?And all the sounds on my phone are on, even the keyboard clicks.

    Try restarting your iPhone by holding down the on/off and the home buttons at the same time until you see the Apple logo, double check the volume button just in case.  If you still can't hear the tones go into your settings>sounds and make sure the options are on. 

  • My phone app freezes and message app crashes. I tried restarting multiple times and the problem persists. Everytime i go to the phone app and press on a contact to call it just freezes up and does nothing. Does anyone know how to fix this problem?

    My phone app freezes and when i press on contact either it freezes or does nothing. Anyone know how to fix this problem? Also messaging app crashes. ANOTHER NEW PROBLEM: I can't receive calls either.

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
    If this does not help, setting it up as new device would be the next step:
    How to erase your iOS device and then set it up as a new device or restore it from backups

  • TS2326 I cannot make any calls or receive any calls since my last iOS update. Does anyone know how to fix this problem

    I cannot make any calls or receive calls from my iPhone after my last update. My phone advises callers I am unavailable and when I try to make calls it takes ages whilst it tries to connect then disabled itself and says call failed. Has anybody else had this problem or does anyone know how to fix it?

    Hi Milrclan,
    Thanks for contributing to the Apple Support Communities. 
    If you're not able to send or receive email from the mail accounts on your iPad after updating iOS, start with these troubleshooting tips:
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Best Regards,
    Jeremy 

  • My pad is asking for a passcode and the one I thought it was is not working and it disables the ipad. Does anyone know how to fix this problem ? Thanks

    Hi, I am looking for assistance on how to reset the passcode on my ipad. It is asking for a passcode & then I enter what I thought it was and it doesn't accept & disables the ipad for 15 mins. Any guidance would be greatly appreciated ast the call centre is currently closed. Thanks  Peter

    If You Are Locked Out, Have Forgotten Your Passcode, or Just Need to Restore Your Device
    1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. iOS- Understanding passcodes
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the
              Back Up option. If you have just backed up the device, it is not necessary
              to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup. If you do not have a
              backup to restore or have forgotten your restrictions passcode, then restore as New.
    If you are restoring to fix a forgotten Restrictions Code or as a New device, then skip Step 9 and restore as New.

  • I just updated ot Mac 10.9.1 and now my outgoing mail only sits in my outbox.  Does anyone know how to fix this problem?

    I just updated to OS 10.9.1 and now my e-mail messages (I use gmail) only sit in my outbox.  Has anyone solved this problem?

    Yes closing Mail and reopening it does then allow the message to go out but I can clearly see that is going to be rather difficult with sending abut 20-30 emails a day! One observation is that it seems to happen more often with attachments.

  • I almost always receive the message "[filename] file couldn't be opened" when opening an existing Pages file in iCloud. Does anyone know how to fix this?

    I am using a MacBook Pro running Yosemite 10.10.2, using Pages 5.5.2.
    I've tried signing off and on, and restarting my MacBook, which sometimes works, but the problem re-occurs. Same problem using Apple Numbers and iCloud.
    Opening local files seems to work more consistently.
    This issue has made Pages and iCloud fairly useless to me. Does anyone have any ideas how to correct this?
    Thanks.

    Hi Ibo,
    This is what just worked for me:
    In Finder, I've dragged all Pages files from the iCloud Drive to the Documents folder on my iMac. (Finder asks your confirmation to remove the files from iCloud; confirm that)
    Once they were on my local hard drive, the files could be opened again.
    It looks to me as if something has changed in iCloud quite recently, leading to this mess. Not the first time, I've had this before. Now it's back. Sigh. And, as you wrote, it renders iCloud fairly useless. Back to Dropbox I suppose.

  • I have a Canon Rebel T2i and can't connect it to my 2010 MacBook Pro (OS X Yosemite). Does anyone know how to fix this problem?

    Canon DSLR tethering problem with Yosemite

    Thanks, Kappy
    I was fooling around with Lightroom and it has a tethering option. I tried it and it worked. But I am still reading my camera manual as you recommeded.
    Thnaks,
    JR

Maybe you are looking for

  • SSAS data source calculating from two data source

    Hi There, I have SSAS cube and use SSRS 2008R2. Basically I have cube A for current month income statement, cube B from previous month, they have shared the same dimensions. I want to create  report to show                   current month  previous M

  • Report ORA-12514 once restart Oracle 10.2 database

    OS: Windows2003 Standard Edition SP1 Oralce 10.2.0.1.0 for Micorsoft Windows(32bit) I install Oracle 10.2 on Windows 2003, during installation, reports a waring at Product-Specific Prerequisite Checks: Checking Network Configuration requirements ...C

  • How to get digital clock (and weather back)

    A couple of weeks ago, I was going to ask how to change the analog clock on the "main screen" to a digital one. But now it is gone completely. My little local weather info underneath also disappeared. How do I get them back? ... While also changing t

  • Best way to implement a docking container

    Hi everyone, I need to create a docking container that behaves the same way the draggable panel system works in Flex Builder (Eclipse): - Dock other containers to the edges - Automatically layout other containers when the dragged container is docked

  • Validate Technical Information from Flat File header record

    Hi Experts, I would like to know the best way to validate data from a flat file where the layout has a header containing the number of records sent and the total amount distributed along the file content. Please, notice we have a commom layout where