I hosed my fs...and don't know how to fix it
When I started up my box the other day, I got the message that the filesystem had been mounted x times without checking, and that I could manually check it or hit ctrl-D to reboot normally. I've had this before so I just hit ctrl-D and now all hell has broken loose. During bootup now, when trying to mount the fs, I get a long string of "Unrecoverable Error" and am unable to go further.
So I pop in my 0.4 install/rescue CD to try and run fsck or something to get back into my system, but have never done that before and have no clue. Is there something I have to pass at the boot: prompt? If I don't, then I cannot access my system, can't run fsck and can't do much of anything. I'd rather not just do a reinstall, as I'd like to try and fix this first. I've tried to do some searching, but haven't found anything except how to run fsck, which doesn't help because I can't even get to that step yet. My only net access now is at work, which is monitored so I can't spend a long time searching...if someone could just point me in the right direction I'd really appreciate it
Thanks in advance
[EDIT]: Well, nothing like finding the answer 30 seconds after you post a request for help :oops: . Maybe someone can just confirm this for me. At the boot: prompt when I bootup to the CD, I can just pass "init=/bin/bash" and will be able to access my filesystem? Or do i need to pass something like "root=/location/of/root/partition". Those are both things i found. Anyway, I'll take 10 lashes for finding the answer after I post for help
well it seems that I completely hosed everything, plus I actually want to try out the 0.5 new installer, etc., so I'm just going to reinstall and pay more attention this time :oops:...thanks for all the help and advice
Similar Messages
-
In downloading iTunes onto my PC (Dell XPS 8700) with Windows 8.1 trying to sync my iPhone but receive keep receiving following error message and I just don't know how to fix: iPhone cannot be synced. You do not have enough access privileges for this operation.
I would greatly appreciate help with this matter.See if the user tip helps: https://discussions.apple.com/docs/DOC-6562
-
I have for gotten my security questions and don't know how to fix it
I have for gotten my security questions and don't know what to do need help
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contacting Apple for support or
Apple ID- Contacting Apple for help with Apple ID account security. Ask to speak to
Account Security.
3. Rescue email address and how to reset Apple ID security questions.
How to Manage your Apple ID: Manage My Apple ID -
Keep getting error and don't know how to fix...
ok, I keep getting this nullPointerException error.. and I have no clue what I've done wrong.... I believe its on the client side of it... because when I run just the client.. the try catch should make it be like "can't find host" but instead.. it just sits there.. the cursor blinking.. and Idk why.. so if you could please help me!!!!!!! heres the server and client code
import java.net.*;
import java.io.*;
public class SocketServer extends Thread
private static Socket socket = null;
static boolean forever = true;
static RTS2 rts;
public static void main(String[] args) throws Exception
ServerSocket serverSocket = null;
try{
serverSocket = new ServerSocket(5454);
}catch (IOException e) {
System.err.println("Could not listen on port.");
System.exit(1);
Socket clientSocket = null;
try {
clientSocket = serverSocket.accept();
} catch (IOException e) {
System.err.println("Accept failed.");
System.exit(1);
while(forever)
try{
ObjectOutputStream oos =
new ObjectOutputStream(socket.getOutputStream());
oos.writeObject(rts.getCompany());
ObjectInputStream ois =
new ObjectInputStream(socket.getInputStream());
rts.setEnemy((Men)ois.readObject());
socket.close();
} catch (Exception e) {
System.out.println(e);
e.printStackTrace();
import java.net.*;
import java.io.*;
public class SocketClient
static boolean forever=true;
static RTS2 rts;
static Socket socket = null;
static ObjectInputStream ois = null;
static ObjectOutputStream oos = null;
public static void main(String[] args) throws Exception
try {
socket = new Socket("josh", 5455);
ois = new ObjectInputStream(socket.getInputStream());
oos = new ObjectOutputStream(socket.getOutputStream());
} catch (UnknownHostException e) {
System.err.println("Don't know about host");
System.exit(1);
} catch (IOException e) {
System.err.println("Couldn't get I/O for the connection");
System.exit(1);
while(forever)
rts.setEnemy((Men)ois.readObject());
System.out.println("hello");
oos.writeObject(rts.getCompany());
oos.flush();
}ok so that was a silly mistake I made... yet it didn't fix the problem... whenever I run just the client, shouldn't it not find a host and not just sit there blinking? but when I do run the server then run the client I get this error from the server side
java.lang.NullPointerException
at SocketServer.main(SocketServer.java:32)
which is when it starts the ObjectOutputStream and such... so I can only assume the problems on the client side, I bet its something easy too that i'm missing.. lol -
I cannot click certain things on firefox and don't know how to fix it.
Okay so this problem started today. I know nothing about computers so a detailed response would be really helpful. When I go on any website, I can't click certain things. For example, on Facebook, I cannot click to update my status and I cannot click anything in the top blue bar. Nothing is blocking them, my cursor just won't click them. I can't download music from sites or do anything that I want to do. I am not sure if it is Firefox or if it is just my computer, because a couple days ago my cursor wasn't working at all unless I plugged a computer mouse into my laptop. I really don't want to download another browser, so I wanted to check here for some solutions. Do you think it is a hardware program? If so is it an easy fix? Thanks!
That problem can be caused by an extension like the Yahoo! Toolbar or a Babylon extension that extents too much downwards and covers the top part of the browser window and thus makes links and buttons in that part of the screen not clickable.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode -
Resized firefox's zoom default and don't know how to fix it
Hello,
I have Firefox ver. 24.0 and it seemed that the zoom was larger than normal but it was it's default size. I've tried to find a solution and it showed going into config, ect. I've accidentally typed a certain number when I was carelessly typing and pressed 'enter'. It is now way, way, too large. When I went into Firefox, all you see is the file button that shows the whole screen! and I've tried using 'ctrl' and '-' but it did not work. I've tried re-downloading Mozilla Firefox but it seem to keep its default! I've even downloaded an older version of Mozilla and yet all I saw was a large 'file' button. Is there someway this can be fixed?
Thank you.hello PyongPyonsaeng, you can perform the following steps to change the value again "blindly":
# open firefox and press ctrl +L (this will put the focus into the location bar)
# type '''about:config'''
# press enter twice
# type '''devpix'''
# press the tab key
# press enter
# type '''1.0'''
# press enter again & hopefully you should be back to normal visibility now -
I have two laptops, one for personal and one for work. I also have an iPhone 4S and an iPad mini. I am trying to link them so that I can receive several email accounts to all devices. I get the emails ok to my personal computer and iPad but when I go into Outlook on my work computer I lose all the emails off my iPhone. Can anyone help please?
You have posted your message to the "Forum comments" forum. The Forum comments forum is intended for making comments on the functioning of any of the forums. The Forum comments forum is not intended for issues related to the use of Adobe products or other Adobe services. Therefore, I am moving your thread to a more appropriate forum, the Createive Suites Macintosh forums.
You can still find your thread through the link at the bottom of the email notification or through the "Your stuff" -> "Discussions" link near the top of the page. -
Page palette appears to be very strange in Indesign (and don't know how to fix it)
So one day, my Page Palette just went cuckoo in Indesign.The bottom area, where you can normally delete, add, or shows you how many pages there are, or the very lower right scretch corner are all missing. I've tried to go to Palette options and see it is a "View" issue, but nothing seems to bring those functions back.
This could either be something Very simple and I am an idiot, or it is something alot more major, which I am praying it's not.
Thanks, any insights is great apperciated!!Replace your preferences. This link is for CS4, and it looks like you have CS2, but the information is basically the same. Read the whole page.
Adobe InDesign CS4 * Setting preferences -
Hello,
I updated Xcode 5 to Xcode 6.0.1. It messed up my previous apps and i don't know how to fix it. Is it possible to uninstall Xcode 6 and go back to Xcode 5?I found this solution http://objcsharp.wordpress.com/2014/09/21/how-to-get-back-the-ios-7-sdk-after-up grading-to-xcode-6/
-
Me and my partner are currently using the same apple id and have no space left on our devices. We are currently waiting on the iphone 6 plus to arrive and don't know how to transfer all data to the new phones.?
I don't know if I'm asking this all in a way that can be understood? Thanks ED3K, however that part I do understand (in the link you provided!)
What I need to know is "how" I can separate or rather create another Apple ID for my son-who is currently using "my Apple ID?" If there is a way to let him keep "all" his info on his phone (eg-contacts, music, app's, etc.) without doing a "reset?') Somehow I need to go into his phone's setting-create a new Apple ID and possibly a new password so he can still use our combined iCloud & Itunes account?
Also then letting me take back my Apple ID & password, but again allowing us (my son and I) to use the same iCloud & Itunes account? Does that make more sense??? I'm sincerely trying to get this cleared up once and for all----just need guidance from someone who has a true understanding of the whole Apple iCloud/Itunes system!
Thanks again for "anyone" that can help me!!! -
I have an iPad 2 and so does my mom. We both have the app Slotomania and now all of sudden after having it for months, our games connected and we don't know how to fix it. Deleting it and reinstalling does not work.
Does the app now use iCloud, do you use iCloud and do the two of you use the same account on iCloud?
Just a guess. -
I accidently chose to reset my settings and don't know how to restore it to before. I was trying to get rid of something and resetting the settings would solve problem but I have just made everything worse. Can anyone help me?
You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
Cheers, Tom -
I am new to Apple and just bought an ipad air. I have a Telus email acct and don't know how to set up a group. Can anyone help me? Thanks
There isn't anything in contacts that has "create a group" . That's why this is so frustrating. I've tried creating a new contact and dragging names into it - doesn't work. I can't find anything that helps!!! What am I missing?
-
I got a new computer and don't know how to get music from ipod touch to itunes library
I recently got a new computer and don't know how to get music from my ipod touch to show on my itunes library.
You need to transfer the iTunes folder from the old computer to the new one.
iTunes: How to move your music to a new computer (Mac or Windows):
http://support.apple.com/kb/HT4527 -
I have a new MacBook Air and don't know how to get info from my USB stick and get info from my SD card. Can anyone help, please?
Plug the stick and/or card into the appropriate slots on the side of your Air. Do you see icons for the devices appear on the desktop? Click into them to see what files are there.
Matt
Maybe you are looking for
-
I'm running windows server 2003, with 10g Release 1 (10.1) for Windows, while tring to create my database i get this error: instance created DIM-00019: create service error O/S-Error (OS 1388)A new member could not be added to the local group because
-
MIGO (Goods Receipt) Executed...No Idoc
One of our sites must manually run MIGO, Goods Receipt transaction. All of our other sites use scanners for barcoding that does the MIGO during thre scan. The issue is when our one site runs MIGO manually, unless they exit MIGO and re-enter MIGO, the
-
The Adobe Photoshop CC 2014 - I can't use becouse is LOOCK DOWN the computer - When USE is LOCK the computer so everything is LOCKING can't even move the mouse + need to restart the computer and use Photoshop CC 64 bit instead - have this problem for
-
WMP codecs missing after import, save & close without exporting
So I can't find the answer to this anywhere and since it takes more than a few words to explain it, I'll try here. So this is what happens. The file is fine I import it into CS6 If I save and close the CS6, then try to play the files with Windows Med
-
OWB 11.2.0.3 do not re-generate DDL on objects deploy
Hi all, I've added a 2nd target location/schema (after a successful deploy on 1st target location) to our OWB project and we got an error on executing the DDL script for the dimension objects. I checked the script and found that it still contains the