I increased my hard drive RAM, I tried to open Itunes and it gives me the following message: iTunes requires QuickTime 7.5.5 or later. For more information on upgrading your computer. Updated everything, still not working. What should I do ?
I have updated all my software, my ITunes content is available in my music and video files, but I click on ITunes and it doesn't open, it continues to give me the message that I ned to update quicktime, quicktimes has been updated, and even Quicktimes Pro has been purchased and installed. What can I do?
You stated; "I increased my hard drive RAM"
I don't understand how you can do that. Please explain.
Allan
Similar Messages
-
iTunes requires QuickTime 7.5.5 or later. For more information on upgrading your computer, what do i do?
Under the Apple menu choose "Software Update".
-
I got my passcode changed but I don't know it. My iPhone is disabled and iTunes can't connect to it because it tells me I need to enter the passcode. My phone says "try again in 48 minutes". Can anyone help me?
Hello iAwesomeness-,
We've an article that provides your available options and the relevant steps for restoring access to your iPhone.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Cheers,
Allen -
I recently downloaded and installed the latest version of iTunes and now keep getting the error message "A required iTunes component is not installed. Please re-install iTunes (-42404)".
Since this, my iPad will not sync, despite resetting it many times.
I have downloaded and installed the new iTunes more than ten times with no luck.
Please can anyone help!!!!!!!Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now? -
Whenever I try to connect to the I Tunes Store, I get the following message " I Tunes could not connect to the I Tunes Store. An unknown error occcured (-3221).
Make sure your network connection is active and try again.
But my network connection is active.
Help!Hi davwatto thanks for taking the time to reply.
ok, so tried to open my safari which was version 5.1.7 and i received the error message:
safari can't connect to the server
safari can't open the page http://www.apple.com/startpage/ because safari can't connect to the server www.apple.com
The same error occurred with whatever site I tried to access, so I uninstalled Safari, then reinstalled version 3.2.3 and this time I got the error message:
The same error message occurred with any website I tried to access. I am able to access all websites including banking etc on IE and firefox.
Safari can’t open the page.
Safari can’t open the page “http://www.apple.com/startpage/”. The error was: “unknown error” (kCFErrorDomainWinSock:10013) Please choose Report Bugs to Apple from the Help menu, note the error number, and describe what you did before you saw this message.
Not sure how to check the logs for itunes though
If you have any idea how to fix this issue that would be great as im at a total loss.
Thanks -
iTunes cannot add any songs to the iPad “Fernando Velazquez Ipad” because no songs in the playlist “Purchased” can be copied to this iPad.
That usually means your phone was previously sync to a different iTunes media library.
by syncing to your Mac now, if want to wipe the data off the phone and sync it with the data currently in the iTunes media library. -
I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?
so i'm using the usb mouseI want to clarify the issue.
The issue is with the MBP trackpad, and it works fine with an attached USB mouse.
With some ingenuity, you might be able to fix this yourself, but I suggest visiting your local Apple Store/Genius Bar. Some have fixed this issue and have posted their results online, but the Apple Store should be your first destination.
Post here with your results!! -
When i try to sync my old ipod touch. it says theres a error. so i update it and reset it and stuff but it still doesnt work. what should i do?
Before you restore the iPod from the backup that Dave had you make yu have to transfer stuff from the iPod to the computer since the backup does not contain the apps themselfes, music, synced phots and some other stuff. To see what a backup contains see:
http://support.apple.com/kb/HT4946
To transfer iTunes purchases:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- For other stuff you need a third-party program like one of those discussed here:
Copy music from Ipod to new computer...: Apple Support CommunitiesA lot of thos are paid, especiall for more than a limited number of items. It is harder to find one that does synced photos. -
i updated to iOS 5.1 but my camera buttone form the lock screen is not working what should i do. i tryed restoring but it didnt work .
When i try the camera loncher but it's not workingi feel stupid now because i didnt know to swipe it up lol
thanks -
I am trying to log on to iwork but it keeps saying that my password is incorrect. I have already reset it and entered my new password and it still is not working. what should i do?
I really can't comprehend the logic that leads to believe that password for old apple id will come to e-mail for new id. Buy may be I just misunderstood something. Contact Apple for assist with password retrieval. If you can verify yourself as account owner they may be able to help you.
-
am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad. an unknown error occurs (1631). what do I do??
The search bar can be very valuable...........
In using it, I found out other's have had this issue and it likely means you have a 3G iPad? If you do, go into settings and turn off cellular data, then try to update again and you should be OK........ -
Since my update, when I try to view videos(rather I already owned or just rented from iTunes) the movie starts playing then I get a pop up can't download view. I've reset my settings, still not working.
You said:
We still couldn't get it to stop timing out. I tried to download the firmware from iClarified but iTunes said it didn't recognise the software.
Just what did yo do to gt iTunes to see the download: -
Started a Itunes software update this morning which didn't work. Now Itunes will not open at all. I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."
There are a couple of options that I know of to fix the issue.
One is listed in this thread - https://discussions.apple.com/message/24606478#24606478 - and involves uninstalling iTunes and related components and then re-installing iTunes. You will need to read the instructions in the thread to see the correct uninstall order.
Second option is use System Restore to set your system back to a date prior to the iTunes update. I did this before finding the thread mentioned above.
Not sure exactly what the problem is but I know, after a search, that MSVCR80.dll was indeed already installed on my computer.
Message was edited by: karivers -
My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?
How long have you had your phone? Because if you've had it a long time, the battery in the phone might of died on you. Or have you dropped it in water, snow, from high up? All those things could of disconnected something internally in your phone, or permentaly damaged the internal hard drive its self, or the sims card.
-
The monitor of my MacBook Pro suddenly became all black, I tried to reset but it did not work, what should I do? Why does this happen?
I advise to reply to the one you want to reply to.
You have had good information here. I will not repeat that here.
I would like to add:
you have incompatible software: start in SafeMode, read Woodmeister and see if it is free of issues.
Akamai is crap software needed or not, Huawei the same.
It is very possible that the keygenerator you used for generating a key for some softwares has infected your mac.
The non-regular software with the false key(s) are not compatible probably or generate malware. Luckily you can not update them automatically because the keygenerator blocked the software for contacting the developer... I propose to consider getting rid of those softwares by really good uninstalling.
You have a beautiful mac, don't degenerate it with crapped software. There are alternatives for expensive software, for example Adobe Photoshop has a free alternative (with a less beautiful interface) in GIMP. And so on.
Lex
Maybe you are looking for
-
First off, let me say that the last time I used this forum, it was very helpful for both my sanity, and in helping to solve my problem. That being said, here's the scoop... My computer has decided it no longer wants to POST. This is the same proble
-
Global attributes in UserSummary Report
Hi, I am trying to build a report which would give user report which contains the extended attributes. For this I have modified the UserSummary ('UI_REPTS_XML_USER_TITLE') report and the extended attributes which are listed under 'waveset.attributes'
-
Deactivating CS5 PC Version and Transferring to iMac
I am making the switch from PC to Mac and need to know what's required to make the transfer of my Windows version of CS5 aqnd Lightroom to an Apple version. I don't want to go the route of installing Windows on the Mac. Thanks
-
Hi, Im reading in from a file and the file is as follows: <EXAMPLE> My name is DeeSheehan. Hello Everyone. How are you today?? </Example> I only want to read the lines after the <Example> line so i have the following piece of code: while ((s = open.r
-
Rookie OC'er - Help appreciated
Hello, everyone! Let me say how incredibly excited I am to have found this forum - experts with the x58 series are tough to find! First time poster, be gentle... As I stated above, I'm a novice OCer in need of some love. I recently built an i7 920 r