I install at the new update cc2014 but for some reason in my computer appear double app the old one and the new but the new dose not gave the setup that I have in my old version! What happen ?
I install at the new update cc2014 but for some reason in my computer appear double app the old one and the new but the new dose not gave the setup that I have in my old version! What happen ?
Seriously, I doubt that your answer helped Erik. He has two issues.
He installed the new program and has a double icon folders with software. One for the new & one for the old. (I have this same problem.)
He must have attempted to open one of the products and no longer see his personal settings transferred over. (The install will ask to have those settings migrating, but you have to accept it. eh, I could be wrong; but, that what i remembered doing.
I concur with his first.
However, i can not get any of my products to work. Ie. have to constantly click on icon to open; once open i get a unexpected error and have to close. I'm on a mac pro w/ latest os system.
In addition, I have tried to uninstall the older by clicking on the application's manager icon.; Unfortunately, it shuts down at each attempt. Therefore, I am unable to un-install the old product or the new.
Possibly, we were hoping that the new product would be simply updated if an old recent was already installed.
Instead, the installation simply created a new icon and the new folder with product.
Similar Messages
-
I've added a pdf to itunes and i want to change it so its visible with an album (digital booklet). But for some reason, when i click get info, its all greyed out and the little box for read only is unticked. please help - urgent! thanks
Hi
My first thoughts are
• iMovie ill behaving - Trash the iMovie pref file - use to set things right
• in reg. to Photos - Did You change iPhoto Photo Library - Then iMovie get's lost as it peeks into iPhoto on start up to see where photos are stored. Set iPhoto back to first Photo Library (when iMovie is not running) then start iMovie.
Yours Bengt W -
So far I have pulled the system configuration file, I have reset safari, I deleted all old passwords from the wifi network in Keychain I restarted both devices. I am at the end here and I cannot get it to work I have an iMac that works fine with my network but for some reason this computer will not connect. It is system wide specifically to my personal hotspot. I can connect fine to any other network (wifi) but just not mine. I have not changed any wifi settings. I have been trying to figure this out. I have a MacBook Pro Late 2006 model running Lion (10.7.5) So any ideas anyone? Please help!
12. At a WiFi hotspot, you can't get connected. The most frequent reason is the login screen for the WiFi hotspot is only able to be connected with a single type of browser. If Safari doesn't work, try Firefox, Chrome, Omniweb, or Opera.
From my tip:
https://discussions.apple.com/docs/DOC-6411 -
I bought an iTunes gift card to purchase certain things in my favorite app. Well when I try to buy things inside the game it does not give me the option to approve the purchase and it never shows up. I have reset the app, I have deleted the app and downloaded again, I have turned my ipod off and on, I have made sure all updates are up to date and nothing has changed. I saw a similar question like mine and the answer was that you have to have a credit card linked to your iTunes account to make in app purchases and I was thinking they were right until I talked to a few friends who cancelled their credit cards and took them off of the account and can still make in app purchases so that can't be the issues. Can someone please help me this is driving me crazy I have talked to iTunes support but they weren't much support.
Not clear what you mean by iTunes help. You can contact iTunes support by:
Apple - Support - iTunes - Contact Us -
I just bought a new printer for my iMac version 10.7 Lion but I am able to install the software but for some reason I am not able to view the printer under system preferences to add the printer. It is connected with the USB cord!! It as if the printer does not show up in the add printer section under system prefernces!!
I checked the manufacturer and apple site to see if my printer is supprted and it said it was!! I am using the HP officedeskjet 4500 G510a-f (HP Officejet 4500 Desktop)!! Still does not show up under add printers please help!!
-
i just got a new apple tv but for some reason the remote only worked for about a min. and than it wount work at all. i tried to pair and unpair but nathing works but when i press a button the light on the apple tv turns off. what should i do?
Have you held the menu and left arrow together for 6 secs ? (I think you have from what you say).
Also try unpowering and restarting AppleTV.
AC -
Im trying to update my iphone with ios 5 but, for some reason its not giving me the option to do it? i've restored my phone once like it says do on the website and it hasnt done it? what can i do ?
Are you sure you have a 3GS and not a 3G? The 3G cannot be updated to iOS5. What version are you on now?... Settings > General > About > Version
-
I have synced my ipod many times, but for some reason it will no longer sync the apps, and says there are apps installed that can not be determined. What should I do?
See these previous discussions:
not determined
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities -
So here's my problem. I just used the "reset all settings" option, and accidentaly restored an old backup. It deleted all my photos and contacts, but for some reason I still have all the apps from after the backup date,and it also kept the notes from after the backup. The "reset all settings" option clearly says no loss of data or media, so I don't understand why some stuff got deleted. My question is, is there a way to get it back?
If you still can find a recent backup listed in iTunes/Edit/Preferences/Devices, use this one to restore from.
If there are no recent backups listed, your data is gone. Only if you included the iTunes backup folder into your computer backup routine, you could be able to restore this folder and find one of your latest backups listed again.
iTunes: About iOS backups -
I've ios 5.1.1 on my ios and i want to update to 6.1.2 not 6.1.3 ive downloaded the 6.1.2 file but for some reason i keep getting (3194) error.. what do I do?
You are getting the 3194 error because you cannot update to 6.1.2, since it is no longer current.
The fact that you downloaded the 6.1.2 file does not matter. If you upgrade, you must upgrade to the latest version.
I cannot imagine why you would not want to update to the current 6.1.3 version instead of 6.1.2. -
I have updated my IPhone 4s to ios6, but for some reason it didn't install Siri with the update, is there any way I can install it onto my IPhone without jail breaking the phone?
Macca_astles01 wrote:
It is an iPhone 4s, it has voice control but it's not Siri, is there any way I can install it?
It cannot be installed. It comes pre-installed on every iPhone 4S and later. Maybe it was disabled under Settings > General > Restrictions.
Courcoul wrote:
Wasn't SIRI one of the gee-wiz doodads introduced with iOS 6? Cause my boss' 4s w/iOS 5 certainly does NOT have it. And on my i5, the Spanish-speaking SIRI I got turned out female, with all the foibles and vicissitudes....
iOS 6 only added support for the 3rd generation iPad. It was always on the iPhone 4S. Then the same goes for your boss: Maybe disabled in restrictions, or maybe actually an iPhone 4. -
Hi, I tried to change my security questions on the internet. But, for some reason, the button to change them is not there! This is annoying as I have recently bought an iTunes voucher and now I cannot buy any new apps. Can anybody please help me!!
Security questions:
https://discussions.apple.com/docs/DOC-4551 -
Hi there
So I just changed from an iphone4S to an iphone 5 because my screen didn't work any longer on the 4s but the phone itself still works so I managed to get all my contacts etc BUT for some reason I can't transfer all my music across to itunes and therefore I can't get it onto my new phone, it only transfers about 50% of it.
Then when i go into music on the iphone 5 it shows the music but won't let you play anything and just flicks through all the songs without playing anything.
Can anyone help please?
Thank youThank you - I thought that might be the case BUT why doesn't the music play that I have bought from itunes - do you happen to know please.
All that happens is it just flicks through it all and won't play any of it???
As in I select the song and it just flicks back one screen (if I am making sense).....
I am really stuck and cannot work out what's gone wrong that's all.
Considering a reset of my new iphone and trying again but done that once and it's still the same. -
I've been producing a podcast for a while now, and just recently had this problem. I've updated the rss feed and loaded new episodes to the podcast, but for some reason the episodes are showing up in the iTunes store when you search for the podcast, but the "Podcasts" app on my iPhone isn't updating, and neither is my subscription to the podcast in my iTunes software.
Can anyone tell me my why the store has my latest episodes, but my subscriptions don't update and add them?That is the correct feed URL.
The title for the episode of 4th February has an ampersand ('&') in it. You can't have an ampersand in an XML file such as a feed because it indicates the start of a code sequence which is never completed, thus rendering the entire feed unreadable in same readers. I'm surprised that the Store is coping with it - evidently the programming recognizes that it's within a tag; the iTunes application, which is a different program, isn't and so is showing no episodes as it can't read the feed.
You need either to replace the ampersand with the code
&
or the word 'and'. -
I installed Nik:s suite of plug-ins for LR5 but for some reason not all of them were installed. In the end I uninstalled all of the Nik programs from my Mac but before I reinstalled them I opened LR5 again to check. Under "photo" and "edit in" the plug-ins were still presented but no programs opened, of course. after reinstalling the plug-ins one of the programs appeared twice in the list but not the others. I´m going to reinstall them again and I´m wondering if there is anyway of erasing the links to the plug-ins under "photo" and "edit in" ???
Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia
Maybe you are looking for
-
I want to escalate a complaint about Adobe 'Customer Service'
Last year I perfectly legitimately bought a second hand copy of Creative Suite 5.5 Design Premium. I have successfully installed it and have been using it perfectly ever since. However, I asked the original purchaser of the software to transfer all o
-
In previous version of Thunderbird it was possible to set that incoming attachments are shown as "Read only". The solution was to set browser.helperApps.deleteTempFileOnExit as TRUE. In the latest version, no matter how I set this value,. the attachm
-
Can't move songs after installing the iTunes 10.5.3 upgrade
Jan. 23, 2012. On Friday, Jan. 20. I installed the iTunes upgrade from the previous version to 10.5.3 and now I can't move my songs in or out of my playlists. The only thing that has changed since the update installation from the previous latest
-
How to determine the current user id!
I have a table. And when the user insert record, I should insert the information about user who create this record in this table. Kostya!
-
How to create database in oracle8.0.5 for linux
I install an Oracle 8.0.5 standard edtion for Linux .But when I login sqlplus as 'system'and use 'create database...',it reply that I don't have priviledge!Why? How can I create database anyway?(with which tools or methord?) null