I just bought a time capsule, and i have no idea how to hook it up. because i am brilliant, right. the schematic in the instruction booklet says its supposed to be between the modem and a printer. ???? With an ethernet cord?

The enclosed booklet suggests that the time capsule is suposed to be between the DSL modem and a printer, connected by an ethernet cable. Ive tried that and the amber light just keeps flashing.

Ring apple they will normally be able to talk you through it.
The TC connection to printer is optional..
Normally you plug into an existing router with the TC in bridge mode..
Tell us what OS you run and we can point out how to do that.

Similar Messages

I just bought a time capsule and it will not connect to preexisting home WiFi.

I just bought a time capsule and it will not connect to preexisting home WiFi. The Airport Utility recognizes one of my neighbors networks but not mine. I have ATT&T U-verse. I understand I can use the Airport time capsule as a router but would prefer to use it in my existing network

tallswag wrote:
I have a similar hookup, I have a Airport Extreme & Time Capsule. I would like to connect my Extreme to the Time Capsule "6th gen". I would also like to use the LAN ports on the Extreme. Can this connection be done wirelessly or wired? I'm using a Mac Tower that does't have a wireless card if that's important.
As long as you have two apple routers then it is up to you which way you do it.
You can connect them by ethernet and use it setup as roaming network.. for wireless.. it will simply be bridged on the router side. Ethernet is much the faster solution.
But if you want to use wireless link that is also fine if the range is not too great. Then ethernet to the computer.. so you effectively have a wireless bridge...
so, Cablemodem----Airport Extreme- - - - - - - -wireless link- - - - - Time Capsule------computer
Where the more solid lines are ethernet.. that is possible setup. And using the TC directly on ethernet to the computer will keep your backup speed good while also giving you hopefully your full internet speed so that works well.

I just bought a new iMAC and cannot print with my old HPO Officejet G85 all in one printer. How do I get the printer working.

I just bought a new iMac and cannot get my old HP Officejet G85 printer to work. What can I do to get it to print from the computer?
JC

The list of supported printers is below. Yours isn't on it.
OS X: Printer and scanner software available for download

I have an airport extreme. I just bought a time capsule and want to replace the extreme with it. I am not technically savy and when i go to do it, it keeps telling me i haev errors and i have no idea what to do, because it mentions things like DNS, etc

can i use both at the same time?

Replacing your router is like a heart transplant for your network. Everything changes.
Power down your modem, disconnect your Extreme, and connect the new Time Capsule. Power up the modem and then the TC.
AirPort Utility will lead you through its setup.
You may need to reconfigure your wireless printers and anything else that was a client of the Extreme.
You may use both at the same time, but only one device should function as your router. Decide which one that will be - it doesn't really matter which, assuming they are both recently produced units. The Extreme can be used to "extend" the TC's wireless network, or the other way around.

Under Snow Leopard I used a WD My World NAS to back up my Mac Pro (Mid 2010). When I upgraded to Lion I am unable to access the backup because the NAS does not yet support AFP. I have now bought a Time Capsule and want to transfer the old backup onto it.

Under Snow Leopard I used a WD My World NAS to back up my Mac Pro (Mid 2010). When I upgraded to Lion I am unable to access the backup because the NAS does not yet support AFP. I have now bought a Time Capsule and want to transfer the old backup onto it.
How can I recover the NAS back up to put on my new Time Machine.
Talking to Apple Support Adviser was a waste of time on case number 239647273
Any thoughts or pointers?

Keep the old OS around and just kick the tires and test new OS. Apple has a history and habit of breaking support in things like this.
You can use TimeMachine as one level of backup, and even there there were changes with Lion, I would always recommend foremost backup clones of every volume. And clone (SuperDuper etc) can be stored on something like HP NAS Media Server which also was supporting TimeMachine, iTunes - until Apple made that harder and more their own proprietary format.
Apple AirPort Time Capsule Support
Lion Communities
Cloning as a Backup Strategy
Rather than "upgrade" I would clone the system, and do a clean install, then allow Setup Assistant to import your files.
Others who are asking the same question:
http://www.bing.com/search?q=mac+os+x+lion+WD+My+World+NAS

Just set up Time Capsule and imac is backed up. Can I back up ipad and iphone too? If so, how do I do it?

Just bought AirPort Time Capsule (2TB) and my imac 10.7.5 is backed up.
Can I back up the information on my iphone and ipad - both are iOS 7.1.2?
On AirPort Utility I am not able to open other Wi-Fi Devices. TC indicates ipad and iphone are wireless clients.
Not sure what I do. Thanks.

iOS devices like the iPhone and iPad back up to iTunes on your computer....or....to iCloud, if you have enabled that option.
If you have a Mac and have Time Machine backups enabled, then the iPhone and iPad backups stored in iTunes on the Mac are backed up to the Time Capsule.
In other words, the iPhone and iPad back up indirectly to the Time Capsule, if you have Time Machine enabled. They do not back up directly to the Time Capsule.
For more information on iOS backups, please see this Apple Support document:
iOS: Back up and restore your iOS device with iCloud or iTunes
Or, you might want to post in the iPhone and iPad support communities.....where the iPhone and iPad experts hang out.
Using iPhone Using iPad

I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!

I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!

you launch QT then go to its REGISTRATION

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

Just bought new Time Capsule, need help setting up...

Okay so I already have my wireless network set up in my house with two airport expresses, I have the airplay and wireless printer set up as well.
Just bought a time capsule today and want to know the best way to set it up. Is it best to use the TC as the "main" wireless router, connected to my cable modem? Is it harder to set it up this way, am I going to have to hard connect the printer to set it up with the Time capsule?
Thanks

Hi,
Personally, I would always use the AirPort device that provides the fastest wireless performance to create my main wireless network.
If you bought a Time Capsule 4th Generation, http://support.apple.com/kb/SP627 chances are high that it is the fastest device you own.
I would set it as "Create a wireless network" and set the two AirPort Expresses as "Join a wireless network" or "Extend a wireless network".
Enjoy your new device !
P-

Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

Just bought my white iphone4 and after syncing with my computer the speaker doesn't work now. I tried reset and even restore and still does not work. Do I have to exchange?

Make sure the silent switch is not set to mute. If you can see the red dot, it is on mute.
It may think you have headphones plugged in, try plugging and unplugging a wired headset a few time.
The next step would be to restore as new.
If none of that works, a warranty exchange would be the resolution.

I just bought a ScanSnap scanner and it came with Adobe Acrobat Standard for Windows - but I have a Mac - can I get the Mac version?

I just bought a ScanSnap scanner and it came with Adobe Acrobat Standard for Windows - but I have a Mac - can I get the Mac version?

Hi Dcee3,
Acrobat Standard has not been developed for Mac platform so Mac version is not available. It can only run on windows machine.
Regards,
Anand

I want to set up the time capsule. I have a D-Link router for WiFi to laptops. Do I connect the time caps to the D-Link or in place of it? thanks

I want to set up the time capsule. I have a D-Link router for WiFi to laptops. Do I connect the time caps to the D-Link or in place of it? thanks

You've posted to the iPhone forum rather than the Time Capsule forum, but to save you some time, you can either replace your D-Link with it since it is a wireless N router, or you can set it up on your LAN as an additional wifi router with its own unique SSID. If you do the latter, be sure to connect your mac to the Time Capsule rather than your D-Link so it will support your Time Machine backups.

I'm selling my early 2011 MBP because I just bought a iMac. Could someone please tell me how to remove all my information from it but leave the OS working. Thanks so much.

I'm selling my early 2011 MBP because I just bought a iMac. Could someone please tell me how to remove all my information from it but leave the OS working. Thanks so much.

How do I securely delete data from the machine?
Erase, formatting, OS X installs on Mac's

Time Capsule and SLOW bandwidth with Verizon FIOS?????

Ok I have had verizon FIOS and my time capsule for almost 3 years. All running latest firmware updates (which might be the problem with the TC). For the last couple years it has been a blazing fast setup and I have a ps3, imac, macbook pro, apple tv, iphone, ipad, etc all hooked up to my network.
Then 5 days ago I buy a new Imac and the firmware update for the TC. Now the bandwidth in my house has dropped to crap. I have directly connected to the FIOS router with ethernet and its like 20 megs per second down and10 up, but when I connect my time capsule back up and go from there it is like 4 down and 3 up? It was NEVER like this before....any ideas or suggestions?

Welcome to the discussion area!
Things were fine before two changes occurred on your network. So, it might be logical to try to isolate one thing or the other to arrive at a possible cause for your network slowdown.
You need to completely power cycle the entire network after you make any change on a network, whether that be adding a new device (the iMac) or making another change (the firmware update).
Power everything off...modem, routers, computers, consoles, printers, etc., the order is not important. Wait 5 minutes. Then power up your modem first and let it run for 5 minutes by itself. Power up the next device connected to the modem (probably your Time Capsule) the same way. Power up the next device the same way, etc. until everything is powered back up.
What are your results?
If things are still slow, remove one of the things that you changed on your network...the iMac...by powering it off, restarting your network again (the extended power off above is not necessary) and then checking the network again.
Any change?
If no change on the iMac test, then the other variable on your network is the firmware update. It's unlikely...+but possible+...that the firmware update changed something in the interaction between your Time Capsule and FIOS router, so something is not functioning quite correctly. Things like this can happen with firmware updates because while Apple knows what works among their own products; they cannot know what works in every instance when another product interfaces with one of of theirs.
It should be possible to rollback the firmware on your Time Capsule to the previous version if you want to try that approach. There's no guarantee of course, that this will help either. Post back if you want to try this.

New to time capsule and need help with installing it?

I just bought a new 3tb time capsule and also new to apple routers I want to use this as my new wireless router how do I go about switching this out with my router now. Im using a linskys router now nothing special I think its only a 300Mbps the only problem is that we just had our new house complete and prewired with ethernet connection in every room and a security system that runs off of the router how do I go about switching that set up to the new time capsule? I know if I had to have the company come out to do it they charge a hefty fee which I know its that hard to do the only thing that's stopping me is that set up to the security system I don't want to screw that up???

Three different aspects
1. Set the form up to submit the data (XML or FDF), not the full PDF. You can import the data to the PDF on your end.
2. You can turn on Extended Reader Rights, but then limit the use/users to 500 by the EULA. The applicability of this option depends on your intended application. In a small office, it would be fine. For general web use you would likely exceed the limit and be in violation of the EULA.
3. There may be an e-mail problem, one reason that e-mail is not recommended for form submission (even if the manual discusses it). Again, in a controlled environment like an office it will probably work fine, but in a web setup it is best to use a web script. There are 2 problems with e-mail that both depend on the client system (YOU have no control, but will be blamed in any case). First, the client machine has to be set up as an active MAPI client. Many folks do not have this on. Second, some e-mail clients treat PDFs like text and the result is a corrupt e-mail submission, even if it makes to you.
If you have the possibility of web submission, do it. I suggest only having the form data submitted and not the form.

I just bought a time capsule, and i have no idea how to hook it up. because i am brilliant, right. the schematic in the instruction booklet says its supposed to be between the modem and a printer. ???? With an ethernet cord?

Similar Messages

Maybe you are looking for