I just bought a WRH54G and am trying to connect it to my...
I just bought a WRH54G and am trying to connect it to my DSL modem which is a Siemens Speedstream 4200. When I run the Linksys set-up disk, everything works ok until it tries to check my computer's settings then it fails, with the error message that it cannot recognize the router.
Here is my setup:
Siemens Speedstream to Linksys WRH54G to Computer via Port 2 and to PS3 via wireless. All of the required 4 lights are solid on the router.
I've called the Linksys help desk and we tried a number of things over 3 hours but the best we could get was wireless access for my PS3 but no access for the computer, which is directly connected via ethernet cable. They suggested that I call my ISP to have them turn the modem to Bridge Mode but my ISP is unable to do so.
Has anyone encountered this before or have any suggestions?
Thanks!
I called my ISP to set it to Bridge mode and they said that they couldn't do that (Linksys help desk gave me instructions on the switch to Bridge mode). However, they then tried to upsell me their own wireless router for $79.99......
Can I make this change myself or do they need to do it from their end?
Thanks!
Similar Messages
-
I just bought a nano and am trying to sync to itune on my mac. It tells me I need the latest version of itune. When I try to download this it tells me I need a new OS. I have updated both and my nano still will not sync. Any suggestions?
Numbers documents from iOS need Numbers 3.2 on a Mac to open. And Numbers 3.2 requires Mavericks. If you are using Mavericks you can get Numbers 3.2 from the Mac App Store. It will be free IF you have Numbers 2 (iWork '09) installed. Otherwise you must buy it.
Your other option is to send the Numbers file as an Excel file via e-mail to yourself to open with an earlier version of Numbers. -
I just bought a MAC and am trying to figure out the correct version
I just bought a MAC and am trying to figure out the correct version of LR4 to install on the Mac. Someone in support (LR) gave the link for the downloads, and I chose the LR4.4 (but, it said LR5---kind of confusing). I don't have a DVD drive, so I am not sure if this one will work. I have the LR icon that says Light Room 4.4 on the screen, but LR does not open when I click it.....????? How do I open this? Thanks!!!
I called my ISP to set it to Bridge mode and they said that they couldn't do that (Linksys help desk gave me instructions on the switch to Bridge mode). However, they then tried to upsell me their own wireless router for $79.99......
Can I make this change myself or do they need to do it from their end?
Thanks! -
I just got an iphone and am trying to connect it to my itunes account. Getting the message " This iphone cannot be used because the Apple Mobile Device service is not started. How do I start it? Have already been back to the store with it and no change.
http://tinyurl.com/3hs3g2u
-
I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences > displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any suggestions why it is not working?
Troubleshoot the network as that is likely what is causing the issue.
Also, temporarily disable the firewall on the Mac and disable IPV6 on the computer. -
Hi there everyone I have had to store my iTunes library on an external WD 1tb hard drive,
Problem is I've just bought apple tv and can't stream my iTunes library from my external hard drive, i have to keep copying what things I need to watch or listen to to iTunes and then stream it that way and it's very time consuming, please excuse my ignorance, but is there a way around thisAs per the question, really...
"My Apple TV (1st Gen) will not synch with iTunes on my Laptop"
There's no error messages
Only the films i've bought on my AppleTV appear on my AppleTV
It's been synching for over 4 hours and hasnt got past the first film and the progress bar is not moving
David -
Just bought a N95 and it won't connect to my provi...
just bought a N95 from ebay from a very good seller and it won't connect to my provider which is ATT.
It connected at my house, but won't connect at work which strangely enough I sell ATT service(I am a dealer).
any tricks or do I have to do something on the computer before I can use the phone?are you talking about connecting to a wi-fi network? r u sure your work network is open? or do u know the password?
Nexu 5 -
I am trying to make a purchase from the Itunes store on my new mini ipad and can not remember the answers to my security questions. how can I change the answers?
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551 -
I am struggling to connect an iMac and a vista pc on a wifi network. The iMac recognises the pc but the pc cannot see the iMac
**DELETED**
-
why wont it let me connect
Hi Logan,
If you are having an issue connecting to your WiFi network, you may find the following article helpful:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Regards,
- Brenden -
I just bought a 5s and when I tried to sync it stopped saying my computer was no longer authorized for some of the items on my iphone. I went to store/authorize this computer and it said the computer was already authorized. How do I fix this?
I have the same issue. There are some suggestions to follow in the Apple support article http://support.apple.com/kb/TS1389 They didn't work for me but they may for you. My old iPhone 3S and iPad 2 syncs fine with iTunes.
-
I'm trying to pair my iPhone 4 with my MacBook Pro and it is saying my MacBook Pro is not supported. I just bought this thing and it's telling me that it isn't supported???
Do you mean Bluetooth?
If you are trying to activate your iPhone you need to use iTunes.
There's no need to "pair" an iPhone with a Mac. Syncing, restoring, backing up, apps/ music / photos etc., is all done with iTunes. -
I can't make or receive calls in my iPhone 5(just bought second hand and unlocked), but I am able to use 3G network. If I use the same SIM card in other phone it works fine. I have tried network resetting and restore.
I bought this cheap from an unknown persons. I have checked it is not in blacklist. And unlocked by apple.Those are all carrier features, so contact your cell phone provider.
-
I have bought a photoshop elements and have installed it on my MacBookPro. I have just bought an iMac and what to install on this computer as well. The iMac does not have a disc drive. I have copied the file onto a remote hard drive and tried to install but it thinks I have a pirate copy. What can I do?
If you click the link in my first post in this thread, then click "still need help? Contact us" it takes you to a page that looks exactly like the page where you started, but isn't. Select PSE for the program you want help with, click "Activation and Signing In" for the problem area and you will see this:
The gray area below the blue bar is a link to start a chat. -
i've just bought online converter and tried to convert my first pdf to excel and it hasn't created a file anything simialr to the pdf table? any ideas why??
Hi Tony,
Would it be possible to share the pdf so that I can test it at my end.
email me at < [email protected] >
Regards,
Rave
Maybe you are looking for
-
...can you tell im new to this!! Well as i was saying... I have had this reconditioned 3gs for about a month and it has been working spot on until this evening, I received a text and went to slide the screen to answer and it is not responding. I have
-
I have recently bought an iPad and was disappointed to find that when I downloaded files of images from my PC to my iPad, the order of the images stored in the 'Albums' on my iPad had been changed. When using the iPad to show 'slide shows', it is
-
I'm currently in the process of shipping my Zen Touch 20gig back for repairs or replacements. I got my RMA number of whatever and says that i need to send a copy of my end user purchase recipet, but i dont think i have that anymore. Is there any way
-
Generated PDF file...TOC Items Not Linked
Been racking my brain all day trying to figure out how the heck I created a PDF document TOC with hot links to the document pages from FM 9...and now all of a sudden when I save as a PDF from FM 9 my PDF document TOC is not linked to the document. H
-
What is a bilevel image ?
Hello, I'm trying to create a tiff image using the CCITT T.6 bilevel compression, but the codec needs a bilevel image and I don't know what it is and how to create one. Can somebody help me ? Thanks in advance, Olivier