I just got the new iPhone 4 today, and when I make calls, the screen doesn't lock, leading to accidental muting and speaker phone. Is there something wrong with my phone? Can I fix it?
I'm just concerned that there's something wrong with my new phone.
Do you have a case on it?
If so, remove and see if it helps.
Similar Messages
-
I just got my new iPhone 4 today, can I just plug it up to my computer and it will transfer all of my info from my 3g iPhone to the new one or will I lose everything?
Is this how you backed up your phone http://support.apple.com/kb/HT1766 if not then sorry all your contents are gone.
-
I just bought a new iPhone 5 today and the Ambient light sensor is not working. What can i do?
I just bought a new iPhone 5 today and the Ambient light sensor is not working. What can i do?
Ambient light sensors are not always perfect in their function. To test, go into darkened room, with screen OFF, Locked, tap Home button. Look at screen it should be normal for use in darkened room, turn on bright lights, the screen should brighten to help compensate. If your iPhone does not do this, then Restore iPhone with current iTunes on your computer. See if better. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.
-
Just got a new iPhone 6, selling my 5 to Amazon. Trying to follow Apple instructions to erase content before sending but 5 will not connect to iCloud so I can't proceed - when promoted to enter password I keep getting "Verification failed. There was an error connecting to iCloud". I have checked apple id/password multiple times and they are correct. Any ideas out there? Thanks in advance
HFJ,
every once in a while my iPhone 5 fails to recognize my Apple ID. I don't have to go all the way to Restore to Factory Settings, I just have to turn off the phone. (Hold down top button until screen asks to slide if you want to turn it off.) Give it a few seconds, turn it on again. -
I got my new iphone 4 white 32GB today and the battery drains quicker than it should
So based on that you're saying around 6 hours discharge? That sounds about right if you're on the web using 3G. Games and apps eat up the battery faster.
Talk time:
Up to 7 hours on 3G
Up to 14 hours on 2G (GSM model only)
Standby time: Up to 300 hours
Internet use:
Up to 6 hours on 3G
Up to 10 hours on Wi-Fi
Video playback: Up to 10 hours
Audio playback: Up to 40 hours
Knowing what you were using it for would help -
Hello I got an Iphone 4 today. The guy set it up for me in the shop and i couldnt remember my apple password so i set up phone using my work email. However I have given him the incorrect one and now at home cannot access the apps or itunes as I cannot verify my apple id. Can i now change it on my phone to the one i use at home? I have worked out how to change it on the computer but dont know were to change it on my phone is it possible? Help.... sal
when you open the app store scroll down to the bottom it will display the apple id currently in use, change it to your normal apple id email
-
Just got my new iPhone 3G home and iTunes won't recognize it
My phone was activated at the Apple Store. I was even using as soon as I got out of the store (for email and such). It won't show up in iTunes. In fact, when it's connected to my Macbook, it doesn't even show it's charging. There's nothing wrong with the USB ports - I've got my old iPod connected right now, and it's showing up just fine in iTunes. My phone gives the charging message only when it's plugged into the USB adapter into an electrical outlet. I've everything the troubleshooting document says - except for uninstalling iTunes. Both my iTunes and computer are fully updated. I checked just to make sure.
Any ideas? Phone works fine (well, haven't tried to make a phone call) - it just won't show as charging when connected to Macbook or show in iTunes.
Any ideas? This is a little disappointing.No, iPod is not connected when iPhone is connected to computer. I plugged iPod in later to check USB ports.
ETA: This is very odd...I decided to try the cable for my 2nd gen Nano with the iPhone - and I'll be darned! The iPhone now works just fine with iTunes! Synching now...Guess I'll have to go back into the Apple Store tomorrow to get a replacement for the cord that came with my iPhone!
Message was edited by: Tradd -
I got my new iPhone 4s today and every time I try to open my Picture file the screen goes black?
I also can't see the file through clicking on a picture in the camera app just after taking it? please help! how do I fix this?
rstart, reset ( home button + power button for 20- 30 sec or intell the apple logo comes up, and then restore as new
-
it wont connect to itunes and their is an error that accurs, ive tryed updating itunes. and nothing..
How exactly do you expect to get help without providing the error that is occurring? Are we supposed to guess?
-
HI
You need AirPort utility to connect your AirPort Express or AirPort Extreme network device.
Here's the software you need on your Mac: http://support.apple.com/kb/DL1537 -
have tryed multipe brands and nothing. Its possible its a first generation itouch which maybe the problem not sure. I also only seem to get about 4hrs of doing anything on my itouch if under constain use is that normal.
The first generation (1G) iPod does not have bluetooth.
See:
iPhone, iPad, iPod touch: Supported Bluetooth profiles
The short 4 hours is problably due to you battery degrading. -
I just got a new iPhone 5. The sales person helped me transfer some photos from my MacBook Pro to the iPhone. Now, I can't get iPhoto to move photos from Photostream to events. Help!
Make sure you have iPhoto's Photo Stream preferences set as follows:
What happens when you drag photos from the Photo Stream window in iPhoto onto the Events icon in the left hand pane? That should import the photos into the library.
If it doesn't thenTry the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto, reset its various preferences and try again.
NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT -
I just got a new iPhone 4S and tried to restore but it didn't finished downloading all the apps, tried to reset and restore again, but it wouldn't start over. What can I do?
http://support.apple.com/kb/ts3694
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware. -
I just got a new iphone and we are hooked up to the same apple ID in this family, and his Ipad Have been receiving my texts. How can I fix this?
Welcome to the Apple Community.
You could simply ensure that only the numbers and addresses you wish to use on each device are checked at Settings > Messages > Send & Receive. However this isn’t an ideal solution because the other person can always change these settings from their device and have some fun with you and your contacts.
You’d be far better getting them to delete your account from their device and have them create one of their own. If you are sharing an ID for some other service such as iTunes, you can continue to do so, you only need change the ID for messages. -
I just got a new iphone,i got ios 7.1.1 on it and the model is MC603RR/A and i can't find siri in settings.
IIn the APP STORE down APP called EVI it,s works likeSIRI
BSYDD UK
Maybe you are looking for
-
How do you email Support? They sold me an incomplete TV show file .
They say how easy it is to email Support, but every link just sends me around in circles to pages I've already been to! They say there are "Email Forms" at the bottom of the support pages, but there are only links to more pages I've already been to.
-
An error occurred during Apple event processing. -43
Every time I reboot my MacBook Pro I now get the following message. "An error occurred during Apple event processing. -43" I'm using OSX 10.6.7. Can anyonw help me resolve this problem? Dan
-
Can't Get ACR Updates for PS CS6
My computer is a PC with Windows 7 Home Premium 64-bit with 8GB of memory. My problem is I don't seem to be able to get any of the Adobe Camera Raw updates for Photoshop CS6 (perpetual license). It's stuck at ACR 8.1. I also can't get the last upd
-
Hi, I have created a new header text in SPRO as Reference Text. But system says its as Cross Client.What will be the effect of this? How do i make the copying rule for my newly created Header text(Reference Text) Regards
-
Unable to insert rows into the table
My insert statement below is not correct, when i try run, its encoutering error "table or view does not exist". Basically what i am doing here is collecting the table name in FOR variable which stores the table name in this variable. This variable, i