I just upgraded to 6.0 and links that want to open in a new window do not work. Right click and selecting open in new window does work.

Similarly clicking a link in email does not open a window. I can drag the link to Firefox and a new tab opens.
Also clicking Tools -> Add-ons does not open a tab as it used to.

mha007, Thank you. I walked through your suggested solutions and finally disabled all add-ons and restarted them one by one. The culprit seems to be ViewSourceWith 0.8.11. Interestingly when it is enabled I had to go to TaskManager to force Firefox to quit.
Maybe this information will help others. I don't know if the cache clearing etc helped but I would suggest that others start but Bringing up Firefox in Safe Mode (hold shift when you select the icon), disable all add-ons and then start them one by one.
Of course if you have ViewSourceWith maybe you should just disable it first rather than go through the tedium of restarting each add-on separately. To get to the add-ons when it won't open from the toolbar type about:addons in the address area.

Similar Messages

When I click on a new site I want it to AUTOMATICALLY come up in a new tab WITHOUT HAVING TO RIGHT CLICK AND PUT 'OPEN IN NEW TAB'. It used to do this but has stopped,..., how do I do this?

Always before when I wanted to click on a new website or a location I found searching google for example, the new website or place I found ALWAYS POPPED UP IN A NEW TAB AUTOMATICALLY WITHOUT me having to right click and say 'open in new tab'. For some reason it is not doing that anymore and when I click on an item it is coming up in the tab I am currently in. How can I set FF to automatically open a new tab whenever I click on a new site like it did before? This is driving me nuts since I am not a computer person at all and had it working the way I was used to before. Please help me fix it back.
Thank you so much.
Celeste

You can also hold down the Ctrl key and left-click or use an extension to force opening a link in a new tab.

I'm getting a 400 and 404 error when going to a known good web site. However, right clicking and opening Firefox as administrator, it works & I get no error.

same user account, same session - running Firefox as a standard user, there's one particular website where I get a 400 and 404 error. Closing Firefox then reopening by right clicking and running as administrator it works. Why? I have no extensions and all add-ons are either up to date or if not, have tried disabling with no resolution of problem.

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

How to disable silverlight "Do you want to allow this Web application to access your clipboard?" popup window, when tyring to right click and paste?

Hi,
When im trying to right click and choose paste. im getting a dialog box.. "Do you want to allow this Web application to access your clipboard?". How do i disable it for all users?
i found that, we can able to disable it for only one user, if we create a 'Clipboard' DWORD key with value '11' in the registry path: HKEY_USERS -> S-1-5-21-159.. -> Software -> AppDataFlow -> Software -> Microsoft ->
Silverlight -> [website url]
Even, i tried
Internet Options> Security> Internet Zone> Custom Level> Scripting section> Allow Programmatic clipboard access> Enable. But its not working.
Please let me know how to disable that popup for all users?

It works fine on my machine here which is win7 pro.
Your options are limited
You know one way - the registry entry.
The option:
Internet Options> Security> Internet Zone> Custom Level> Scripting section> Allow Programmatic clipboard access> Enable.
Has been changed by later versions of Internet explorer tightening security.
I guess you could try:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"
meta http-equiv="X-UA-Compatible" content="IE=EmulateIE7" />
Bit difficult for me to test at the moment, but that could work.
If that's no good.
The alternative is to give the app elevated trust.
This is a PITA because you have to obtain a security cert and sign the xap with it.
They expire as well and you then need to buy a new one.
Costs several hundred quid a year ( this is one time cost rather than per user ).
Hope that helps.
Recent Technet articles:
Property List Editing ;
Dynamic XAML

I was updated to 3.6 and now I cannot create new tabs. Neither the plus sign or cntl + T will open a new tab. If I right click and choose "open in a new tab", however, the tab opens just fine.

I've tried restarting the system, but decided not to uninstall/reinstall firefox, just in case I lost all my bookmarks and favorites. The restart did not solve anything. Also, I have colorful tabs add on and it was updated today. I disabled it, but that did not help either.

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

Windows 7 -Delay after right click and installation query

Hi,
I have freshly clean installed Windows 7 home premium x64 in my HP laptop which was previously running the x86 version of the same factory installed OS.I have performed a usb install.Now,I have two queries-
1.During the installation,when the machine rebooted,to complete the installation process,it gave the option of 'Continue with win 7-EMS ENABLED'-and I went ahead with it and completed the process.I want to know whether this EMS thing is normal or not?
2.There is a slight delay after the right click in the desktop-how can it be resolved?
Looking forward for your valuable opinions regarding this

Hi,
First please know that EMS allows users to control particular components of a server remotely, even when the server is not connected to the network or to other standard remote-administration tools. In Windows Vista and later, use BCDEdit /emssettings command
and its parameters to establish EMS settings for all boot entries. Then, use the BCDEdit /ems command to enable EMS for a particular boot entry.
It's ok to get EMS enabled.
For your second question, it seems a performance issue.
Please first let me know except the system default context on the right click menu, if there is any 3rd part context menu or extension. if so, please use shellexview to remove them:
1. Download ShellExView v1.41 from the following link
http://www.nirsoft.net/utils/shexview.zip
Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's performance or reliability.
2. Extract "shexview.zip" file and open shexview.exe. It will scan the registry for all the shell extensions.
3. Select all the non-Microsoft extensions in pink by press "Ctrl" in the keyboard.
4. Click the "Disable Selected Items" on the toolbar and click Yes.
5. Restart your computer and check if the issue is resolved.
If there is no such context menu, please run performance troubleshooting under Control Panel\All Control Panel Items\Troubleshooting\All Categories.
Also, help to test the issue in Clean boot mode.
How to perform a clean boot
http://support.microsoft.com/kb/929135
If the issue doesn’t appear, you can determine which one can be the cause by using dichotomy in MSconfig. Checking on half of Non-Microsoft service and restart, determining which half of the services cause the issue and repeating to check half of the problematic
half services.
If the issue still persists, please check if there is any related error or warning in event logs, post back for our further research.
Kate Li
TechNet Community Support

Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to.

Just upgraded to Mavericks. Now I cannot access scans from my hp scanner. After it complete the scans and I try to save as tiff, jpeg or pdf I get a either a grey blur or a message that says cannot save because the file cannot be written to. I did not have any problems before the upgrade. I would greatly appreciate any light shed on this.

Go to the HP site and look for drivers for your scanner. It apparently needs an updated driver to work with Mavericks.

When I click on links in websites the links don't work unless I right click and choose open website in another tab/window. This is even a problem on the Firefox page.

When I try to open a link on any page/website Firefox does not open the link. It doesn't even "work" at opening the link, it just sits idling. I have to right click and choose "open link in new tab/window" in order for Firefox to open the link. It doesn't happen 100% of the time but happens especially if there is a button or picture that must be clicked. Simple text links seem to work more often then button or picture links. One example provided below. When you click on the "launch Jumpstart" button it will not open unless you right click & open new. This also happens from my Yahoo! Email account, on Facebook, Cructhfield.com and other websites with "button" related links.

I have the same problem but it appears that an add-on I'm using is causing the problem. Try opening Firefox in safe mode (which disables add-ons) Then try it. If that solves the problem, you need to disable all your add ons and enable them one by one to figure out which one(s) is causing the problem.
[http://www.chowins.com David Chowins]

Opening a new link in a tab (contr+click or right click and open in new tab) causes ff to lose scroll position in first tab or main website, like google.

Opening a new link in a tab (contr+click or right click and open in new tab) causes ff to lose scroll position in first tab or main window, like google.
This does not happen when opening in a new window (shift+click).
It was never a problem in older versions. I now have ff 3.6.17. I' afraid to install ff4 because everytime i do so (install e new version) something i liked dissapears or good add ons dont work anymore!
I also don't like the fact that more and more of the adress barr is beïng used for crap i don't need. I'm a visual handicap and need all the space i can, just to read.
Thanks for helping me out.

To help other users find solutions, please return to this Thread and '''Sign-in''' to the forum with your Username and Password:
click on '''"Solved It"''' next to the reply ABOVE that '''BEST''' solved your question
'''DO NOT click "Solved It" next to this reply

In the previous version of FF I could type a term in the address bar and it would auto open that website, now it just performs a google search. Is that a setting I can adjust or is it not available anymore?

In the previous version of FF I could type a term in the address bar and it would auto open that website, now it just performs a google search. Is that a setting I can adjust or is it not available anymore?

The change between Firefox 3.6.* and Firefox 4 is how location bar search works. In Firefox 3.6 it uses Google "Browse by name" search. With the browse by name search, it performs a Google search and if there is a clear match it will take you to the site, otherwise it shows the Google search result. With Firefox 4 it just performs a Google search if you type something which is not recognised as a URL.
To get the Firefox 3.6 behaviour on Firefox 4 you need to change a hidden preference.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''keyword.URL''', double-click on it and change its value to the link shown below
[http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q= http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=]
If you prefer, you can also do this by installing the Browse by Name extension - https://addons.mozilla.org/firefox/addon/browse-by-name

I just upgraded to Firefox 8 from Internet Explorer. Previously, I pulled up my emails from Start, Email-Microsoft Office Outlook. I get no response doing that now. How should I get my emails?

I just upgraded to Firefox 8 -- from Internet Explorer.
Previously, I pulled up my emails from Start, Email-Microsoft Office Outlook.
I get no response doing that now.
How should I get my emails?

If there are problems with importing the IE Favorites in Firefox then export the favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
If you do not have the menu bar in IE then right-click the toolbar at the top to enable the Menu Bar.
*Export the favorites in IE to an HTML file (bookmarks.html):<br>File > Import and Export
*Import the HTML file in Firefox:<br>Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML
See "Import from another browser" and "Import from file":
*http://kb.mozillazine.org/Import_bookmarks

Links on websites will not open unless I right click and open in new tab/ window

This just started yesterday. Whenever I go to a website I am unable to just click on a link on the page and be directed. When the mouse goes over the link the info appears in the bottom bar but when I click nothing happens. In order to navigate to the link I have to right click and open in a new tab or page.
Please help on fixing this issue.
Thanks!

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Just upgraded to Mac Lion... can't access Appleworks6...get this message... "You can't open the application AppleWorks 6 because PowerPC applications are no longer supported".... I've got dozens of documents saved that I can't access?!!!!!

Just upgraded to Mac Lion... can't access Appleworks6...get this message... "You can't open the application AppleWorks 6 because PowerPC applications are no longer supported".... I've got dozens of documents saved that I can't access?!!!!!

Rosetta is not included Lion, if you are not familiar with Rosetta it was an application included in Tiger, Leopard and Snow Leopard that allowed PPC based apps to run on Intel based machines. That was over 5 years ago so it's time to move on. As has been suggested you can read those documents in Pages which is available on the App Store. Pages is part of the iWorks suite that replaced AppleWorks years ago. Currently iWorks is on iWorks 09 , and includes Pages, Numbers and Keynote. You can find each on the App store.

I have just upgraded to OS X Mavericks. It wanted me to upgrade my 20000 photos before the New iphoto could use them. I did. 43.6GB of photos became 1.8GB of very small photos of arounf 178KB instead of 2.5MB. Can't do anything with them. Help?

I have just upgraded to OS X Mavericks. It wanted me to upgrade my 20000 photos before the New iphoto could use them. I did. 43.6GB of photos became 1.8GB of very small photos of arounf 178KB instead of 2.5MB. Can't do anything with them. Help?

The obvious and simple solution is to restore from the back up you made before upgrading.
Other than that you'll need to give us a lot more detail. Mavericks doesn't ask you to upgrade your Photos, upgrading to a later iPhoto asks you about upgrading the Library. Where is the library? What version were you upgrading from? Anything else you can tell us that might help understand the problem you're having.

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN

I just upgraded to 6.0 and links that want to open in a new window do not work. Right click and selecting open in new window does work.

Similar Messages

Maybe you are looking for