I know I'm in the wrong place, but maybe someone will still help me...?
Hi all,
I'm an ancient Solaris sysadm (like Solaris 6, long, long ago) who is trying out OpenSolaris on a T42 laptop. I registered under the OpenSolaris forum but alas, I can't login and the support people haven't fixed my problem, yet. Instead, they set me up for the reg Sun forums, so here I am. ??
My problem:
Can't get my cheapo Samsung ML-1740 to print using the print manager. Says it's ready to fly, but nothing pops out. I'm assuming it's a driver issue. Went to the HCL pages and the laptop was listed as compatible, but the printer isn't confirmed as compatible for OpenS., so I'm assuming my printer will never work under OpenS. All I can find out on the Web is a driver for LINUX. Im assuming that a LINUX driver won't work under OpenSolaris...
Any suggestions before I end up trying Ubuntu instead? (I'm doing all of this in Live CD; don't see any reason why it shouldn't work other than a poss driver issue.)
Thanks for any assist.
Kim
OK, back to basics:
1.) The Samsung is NOT a PostScript NOR a Network printer (see for example the User Manual at: http://www.samsung.com/au/support/detail/supportPrdDetail.do?menu=SP01&prd_ia_cd=06010400&prd_mdl_cd=&prd_mdl_name=ML-1740), so two topics:
a.) How did you connect it: Parallel? USB?
b.) What do you want to print? PostScript? Then you need a rendering engine (that's, why I did propose CUPS, because that makes things easier to setup, BUT: it's not feasable in the LiveCD!)
To check with 1.) a.): (In case of USB connection): What does "cfgadm" list? Is there a USB Printer listed somewhere? I've not yet done it myself, so can't provide examples of the output... ;-( And: What does "prtconf -D" provide? It should also somehow list the usbprn driver... Also "modinfo|grep usb" should list the usbprn driver...
If connected via parallel, you might need to enable or "free" the parallel port... Never done that myself, so also sadly no examples here...
b.) Now you need to "drive the SLP language" of the printer. Because I assume, you do not want to print plain ASCII... ;-) That's why I guess, that CUPS et.al. might come in handy here... And the CUPS GUI (BUI) also manages all the other config steps. But, sadly, as mentioned, you need to install CUPS as described above, and that's not feasable on the LiveCD... I also doubt, that ghostscript et.al. are available directly from the LiveCD, so the only thing that you might achieve from the LiveCD is printing a plain ASCII page...
So, can you see "some kind of action" on the printer after you spooled the file? (aka: Does the communication to the printer work? Or can you see error messages in /var/adm/messages?)
Matthias
Similar Messages
-
I dont know if im in the wrong place but Im looking for a white MacBook Pro
I dont know if im in the wrong place but Im looking for a white MacBook Pro, I was told the white is cheaper but its not advertised anymore so I had to talk in here to get info? Can somebody please help.THANKS!
<Email Edited by Host>Click the grey store tab at the top of this site & compare for yourself.
-
I was wondering how long it takes to get the iPod rebate after paying for it with your MacBook Pro order? If nobody knows the answer could you please point me in the right direction in terms of who to ask?
Thanks alot!
-GeorgeI guess they would better know how long it has been taking for the rebates.
When we were making the order
You previously wrote, "I haven't ordered the iPod yet"
"PURCHASE RESTRICTIONS: Except as otherwise provided in these terms, the Apple _computer and iPod must be purchased on the same invoice/sales receipt_."
If you already ordered the computer but not the iPod, you do not qualify for the rebate. -
hello, maybe i am writing to the wrong place, but i'll try here. so i have a slogan idea for iPhone 5. to who can i write to?
Try the link below.
http://www.apple.com/feedback/iphone.html
Stedman -
Hey, it could be that I'm in the wrong place, but I have a question.
Hey, it could be that I'm in the wrong place, but I have a question.
So we are a gaming community, and we have the privilege of setting up tournaments in (exm) StarConflict.
My question is , where looking for sponsers. I'm not asking mutch (like laptops or what ever) i'm just asking for like steam gift's to or members.
And steam Gift's that we can give away as a price in or tournament... (or any way that we cud get sponserd)
If I'm at the wrong place for this cud you redirect me to the right place?
Thank you for your time, GrZ .I believe this is a question you need to ask MSI support...mailto:[email protected] They should be able to provide you with the information your looking for, or at least provide you with the direction of where to go. You could also contact some of the other MSI sponsored teams, and look to join them, or ask them how they became sponsored...
-
I Know I am in the Wrong Room, but I Need Some Help with an Mpeg 2 File
Hi, all--
Forgive me as best you can--I am in a fairly desperate situation. Allow me to explain, and please feel free to contact me at [email protected] if you know a lot about this stuff I'm going to describe.
We have a project, 29 minutes long. It is a slideshow of paintings with original music by me.
I live in central Mexico (love it!). However, I was forced to use a video editor who has been a dunce so far. No matter what I ask him for, whether it is a version in a specific format or an edit, I get something different. Every time he has fixed a problem, he has created a new one.
Now his house was broken into and all of his computers were stolen--I suspect he only has low quality backup files of the project.
We are in a huge rush, because this is supposed to debut at an arts festival in October, and we need to duplicate a few hundred DVDs first...and now the problem:
ALL WE HAVE FROM HIM IS AN MPEG2 of the project. The sound won't play on my Mac, but it plays on my friend's PC, so I have to assume that a pro duplication house won't have a problem with the sound if I send him the file on a thumb drive.
THE PROBLEM WITH THE MPEG2 is that it is jittery when key images slide across the screen. This will look terrible on a 6 x 10' screen at the premiere, plus we do not want to sell DVDs with this unprofessional look. I asked the editor for an M2V file (requested by the guy who was going to create a menu) and he instead gave me an Mpeg2 that is jittery.
QUESTION: is there such a program that can take an mpeg 2 and eliminate jitter? I do NOT think I can get another file from the editor.
CAN ANY OF YOU DO THE WORK IF I SEND YOU THE FILE? I WILL PAY.
Thanks.
DougFirst of all, Hunt--thanks for responding!
"First, where are you playing the MPEG-2, that you see that jitter?"
On both a MacBook Pro, an Acer laptop and my Mac Tower. I would love to think that it is a problem with the playback system, and that if I merely send the file off to the duplicator they won't have the same problem. Maybe that is the case...I don't know if I have a choice rather than sending it off to see. But it happens in the same spots, in the same way, on all three of the players so I'm a little reluctant to have faith.
"Another thing that can cause jitter in an MPEG-2 is the Bit-Rate - higher the Bit-Rate, the better the quality, but the larger the file. For a DVD, one is limited by the total Bit-Rate (both Audio & Video), but with longer prodcutions, some users choose too low a Bit-Rate. If this is the issue, one would need to go back to the original Project and do a new Export/Share."
Of course, but in the case there is no more 'original project.' It is gone like the wind, stolen along with his computer and backups.
I think I am stuck using one of two files as my master: a DVD he burned where I only see the stutter/vibration/jitter once, or the mpeg2 file where I see it three times. Hopefully, the duplication house can rip if off of one of them and not see the jitter. I know that in audio, my personal filed, you can do a lot to enhance already existing sound--EQ, compression, tape saturation emulation software, etc. I guess I'm hoping there is some kind of analog to the video world that address jitter after a source has been printed--if indeed the source has been printed to be jittery.
Thanks,
Doug -
I dare say I'm in the wrong place but...
Hi folks.
I'm new to the database of the internet concept, and so must
be considered a vomplete dummy.
How the hell do I get MySQL to work/connect/put data in a
table/validatge user entry against it?
Yeh, I know - a big question.
Quite simply, I have a form with a username and password
field in it. Click on submit and if the name/password was valid
then you go on to the next page.
I've created the form and the button.
I've created the MySQL database called fred_ and a table
called users. I have a valid user for the database too, fred_harry.
Try as I might I can't get the connection to work, and once I
have got the connection what happens, I could write the thing in
Clipper or Delphi easily, but my knowledge of SQL is minimal.
ANd how the hell do I actually get the usernames and
passowrds into the table to validate against? As in, now do I
create records?
Yeh, I know, go back to school but I can't afford to do that.
:D
Thanks for your help
Simontrunkles wrote:
> How the hell do I get MySQL to work/connect/put data in
a table/validatge user
> entry against it?
>
> Yeh, I know - a big question.
Big enough for me to have written several books about it. If
you want
the complete answer, consider grabbing hold of "Foundation
PHP for
Dreamweaver 8" or "The Essential Guide to Dreamweaver CS3
with CSS,
Ajax, and PHP" (details of both books can be found by
following the link
in my sig).
However, the first thing you need to do is to get your MySQL
connection
working. Obviously, MySQL must be installed and running. If
you're
working on your local computer, you also need a web server,
such as
Apache, not only running, but configured to work with PHP. If
PHP isn't
installed, you can find instructions for installing it with
Apache on my
website at the following address:
http://foundationphp.com/tutorials/php_installer.php
You also need to set up your testing server in the
Dreamweaver site
definition. For a local testing environment, the settings are
as follows:
Server model: PHP MySQL
Access: Local/network
Testing server folder: C:\htdocs\mysite\
URL prefix:
http://localhost/mysite/
The last two settings are examples only. Testing server
folder is the
path to the root folder of your site, which must be inside
the web
server's document root. URL prefix is the URL to the same
location.
If working with a remote server, choose FTP as Access, and
fill in the
FTP host address, login, and password. In place of Testing
server
folder, you will see Host directory. This needs to be the
path to your
site root. If your FTP login takes you directly to the site
root, leave
this blank or simply insert /.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
My account shows the wrong plan but I can't find help on the web site. Where do I go?
Please don't say to a phone. I want to handle this by email. It is a simple question/correction matter. I can't find a way to email Verizon on this web site. Anyone know where it is? I also tried live chat 3 times over the past week. No response; each time I went in circles with what seemed like the appropriate click bringing me back to the previous screen.
The problem is that I upgraded and changed my service several weeks ago, just before the recent billing period ended. All the transactions except the change in plan show on my account. The plan change was from family to more everything.
All I need is someone to look at my account, tell me if I am miss interpreting it, and, if not, correct it.
GeoffUnfortunately that is the trend. Maximize profits at all costs. So reduce anywhere you can. Support is first, and then anything else to keep upper management in place getting huge salaries and commissions and profit sharing and stock incentives.
This is America, land of big business. And when they start to go bankrupt, we the people of this country will have to pass laws to bail them out; to abuse the masses once again. Vicious cycle.
Good Luck -
I think I effectively proved my point about knowing nothing about this, by posting my whole question in the title. To review, I have a 1 year old iPad, and have Pages on it for a word processing program. I somehow turned on bullets on one of my documents and can't figure out how to stop it, and they are in all the wrong places. How do I turn it off?
1-800-676-2775 apple support tech support 1 800 275 2273
If your computer is on one minute before it freezes, than you have one minute to secure your serial number.
click the apple----->click about this Mac ------> click on version----> until you see the serial number. You may have to do this a couple of times if it freezes before you have all the numbers. A camera might help.
Good Luck -
What If The repeat is in the wrong place
Just want to share my first panic moment...
This is a stupid question but I like to know the best way to handle this.
It was my first panic moment because I had never seen this before.
This weekend I was testing some scripts with a loop (repeat action)
The script had to make a new text edit document, and some more tasks...
But I placed the repeat at the wrong place so when running the script...
I had in no time 300 documents and keep counting... So the repeat was wrong...
and the script keep running and running.... panic... How do I stop this ?...
So I force quit text editor. but the script(activate text edit) and keep on running... I had so many files open on top the system almost crashes...
The only solution I had was shut down..
And hoping the script doesn't start over...
ok.. didn't continue... fiew.
Did some changes and had to run it again... (Hoping that it will work)
almost ready... one more shut down. (again many files...)
So after the last changes the script works perfect but I want to know how I do this in the future when testing something like this...
When A script keep running.
What is the most elegant way to stop this?
thanks.Command-. is the standard method to stop a process.
This may not work if your script first sets TextEdit to the active app (via an activate command) because that would send the Command-. to TextEdit, not to the script.
If that were the case then you would first have to activate the Script Editor (or wherever you ran the script). If the activate command was within the loop then that might silll fail because it would switch back to TextEdit before you had a chance to stop the script.
If all else fails, Ctrl-click on the Script Editor's icon in the dock and choose 'Quit'. This should send a signal to the app to stop processing (hopefully offering you a chance to save your script). At that point you can quit or not - the script has stopped running which is the main point.
If that still doesn't work, then you may have to force quit Script Editor, losing any unsaved edits to your script, but it wouldn't be as harsh as a forced shutdown of the whole machine. -
I accidentally deleted all of my Logic Pro X files and put them in my trash but now that I copied them back to my documents they all play in the wrong places in my projects
Buddhaguru wrote:
I know that Mac's don't have a roll back like PC's
They do. It's called Time Machine.
You need to reinstall all of your Apps. That should replace all of the support files you nuked. -
Probably the wrong place to ask this.
I'm not sure where to ask this, but I'm interested in working as an Apple technical support person. My dad wants to know if I can work from my home, but I always thought the Apple tech support people worked in an office somewhere. And would degree or certificate would you need?
Thanks, and I"m sorry that this is the wrong place for this question, I"m just not sure where to ask.Here's the listing of tech support and related job opportunities. Several pages; some job positions have odd-ish names, but if you click the link under Job Title you'll get a description.
Apple - Jobs at Apple - Search Results -
My iPhoto is not responding. Whenever I click on the iPhoto icon I get a twirling beachball. It is as if the machine is looking in the wrong place for the photos. How can I see where the machine is looking to find out if this is really the problem. How can I see the path?
Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it doesn't then the problem lies with your current library.
If that's the case Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
Help. I have been editing a project for two weeks and now it gets ghosts of ohter images from the project coming up in the wrong places. The thumbnail has the correct image but the image either does not display and its black or an old image or another one shows.
When I have problems like this I do two things. First I shut down and restart iMovie. Sometimes that rejuggles the date. But I am sure you have been doing that in such a long project.
The Second thing I do is delete iMovie preferences, which can get corrupted.
Home-library-preferences-com.apple.imoviepref
Hugh -
I have logic pro, soundtrack pro will not open i get an error message what do i do? i cant find the receipts ive checked my library am i looking in the wrong place?
I get the same kind of thing..
I'm on osx 10.7.2 and once I click the soundtrack pro icon I get an error message. I had problems with logic pro & my digi002r soundcard midi drivers but now is fixed (using a midi adapter).
here is the code:
Process: Soundtrack Pro [1705]
Path: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Identifier: com.apple.soundtrackpro
Version: 3.0.1 (960)
Build Info: SoundtrackProProject-9600000~277
Code Type: X86 (Native)
Parent Process: launchd [140]
Date/Time: 2011-10-18 13:12:05.201 +0200
OS Version: Mac OS X 10.7.2 (11C74)
Report Version: 9
Interval Since Last Report: 195725 sec
Crashes Since Last Report: 3
Per-App Crashes Since Last Report: 2
Anonymous UUID: 23728D81-590B-4C3A-8C67-1709945CD132
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /Library/Application Support/ProApps/*/ProFX.framework/Versions/A/ProFX
Referenced from: /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
Reason: image not found
Binary Images:
0x1000 - 0x7f7ff8 com.apple.soundtrackpro (3.0.1 - 960) <77CF322B-8BBE-AAEA-173F-75A237035319> /Applications/Soundtrack Pro.app/Contents/MacOS/Soundtrack Pro
0x947000 - 0x94bfe6 +STPInterleave (??? - ???) <E87D1F34-6D97-63DB-454C-CF3D1B03F8E5> /Applications/Soundtrack Pro.app/Contents/Frameworks/STPInterleave.framework/Versions/A/STPInterleave
0x952000 - 0x98ffff com.apple.vmutils (4.2.1 - 107) <43B3BFA5-8362-3EBD-B44B-32DCE9885082> /System/Library/PrivateFrameworks/vmutils.framework/Versions/A/vmutils
0x9a9000 - 0x9f5ffb com.apple.audio.midi.CoreMIDI (1.8 - 42) <CBD34EBC-0FFD-34B4-B55A-BE1F61EF4BD8> /System/Library/Frameworks/CoreMIDI.framework/Versions/A/CoreMIDI
0xa18000 - 0xc3eff7 com.apple.prokit (7.1.1 - 1511) <498819A4-1BDD-3671-8796-E11865BCFBCE> /System/Library/PrivateFrameworks/ProKit.framework/Versions/A/ProKit
0xd49000 - 0xd49fff com.apple.iokit.dvcomponentglue (2.0.7 - 2.0.7) <1CFA5944-AB33-3A41-B4D2-4A624A514C0D> /System/Library/Frameworks/DVComponentGlue.framework/Versions/A/DVComponentGlue
0xd4d000 - 0xd54fff com.apple.AEProfiling (1.2 - 22) <43A46C32-8E13-82DD-8AF1-2A40690BF810> /Applications/Soundtrack Pro.app/Contents/Frameworks/AEProfiling.framework/Versions/A/AEProfiling
0xd5e000 - 0xd6dfff com.apple.AERegistration (1.2 - 77) <5D18C47F-6F9E-0C4C-8875-24A14A97186D> /Applications/Soundtrack Pro.app/Contents/Frameworks/AERegistration.framework/Versions/A/AERegistration
0xd81000 - 0xd83fff com.apple.ExceptionHandling (1.5 - 10) <6CA9446C-7EF9-35EE-BDF2-AA8D51E93E9E> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
0xd89000 - 0xe49fff com.apple.omf_framework (1.1.0 - 1.0) <ED5F21BC-18CD-D7F7-3D2E-F7F856BC0D40> /Applications/Soundtrack Pro.app/Contents/Frameworks/OMF.framework/Versions/A/OMF
0x11000000 - 0x1102afeb com.apple.proapps.ControlSurfaceSupport (2.0 - 68) <BD914236-49D8-9C9A-E8D6-CBC1738850B3> /Applications/Soundtrack Pro.app/Contents/Frameworks/ControlSurfaceSupport.framework/Versions/A/ControlS urfaceSupport
0x8fe88000 - 0x8feba9c7 dyld (195.5 - ???) <134323A7-49DC-3A9D-ACFD-32FAD0FD6BA2> /usr/lib/dyld
0x90840000 - 0x90992fff com.apple.audio.toolbox.AudioToolbox (1.7.1 - 1.7.1) <7646E131-08EE-3D72-ADA2-4A61C562B36E> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
0x90993000 - 0x90993ff2 com.apple.CoreServices (53 - 53) <7CB7AA95-D5A7-366A-BB8A-035AA9E582F8> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x91e60000 - 0x92036fe3 com.apple.CoreFoundation (6.7.1 - 635.15) <AC9F6462-6315-3D89-8075-D048DB4DBF7E> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x924a8000 - 0x92509ffb com.apple.audio.CoreAudio (4.0.1 - 4.0.1) <089D78E0-46A6-38DB-9545-7F35CC815939> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x93281000 - 0x9328ffff com.apple.opengl (1.7.5 - 1.7.5) <81166D23-DE8E-3938-AAD3-29B1FA5E446E> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
0x93331000 - 0x93331fff com.apple.vecLib (3.7 - vecLib 3.7) <8CCF99BF-A4B7-3C01-9219-B83D2AE5F82A> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x93332000 - 0x93493ffb com.apple.QuartzCore (1.7 - 270.0) <0916DA83-6400-3FEA-BC53-5F4BA4D126EC> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
0x94326000 - 0x9436dfff com.apple.SystemConfiguration (1.11.1 - 1.11) <CA6CE2B6-DC18-31FF-9668-70BB2FD8D7BB> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x94420000 - 0x946a5fe3 com.apple.QuickTime (7.7.1 - 2306) <F8C64DC4-3FE4-3A06-B10B-59E7F3BA6FDD> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
0x97dd0000 - 0x98082ff7 com.apple.security (7.0 - 55010) <BE0350C5-5221-3BFF-B674-646AB1BA0F2E> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x99d12000 - 0x99d76fff com.apple.framework.IOKit (2.0 - ???) <D14460ED-2B6C-375D-B3A4-B8C82E922666> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x9adc8000 - 0x9adc8fff com.apple.audio.units.AudioUnit (1.7.1 - 1.7.1) <2E71E880-25D1-3210-8D26-21EC47ED810C> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
0x9aef1000 - 0x9aef1fff com.apple.Carbon (153 - 153) <6FF98F0F-2CDE-3888-A304-4ED447D24CE3> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
0x9b2ec000 - 0x9b2ecfff com.apple.Cocoa (6.6 - ???) <650273EF-1ABC-334E-B745-B75AF028F9F4> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
Model: iMac12,1, BootROM IM121.0047.B0A, 4 processors, Intel Core i5, 2.5 GHz, 4 GB, SMC 1.71f21
Graphics: AMD Radeon HD 6750M, AMD Radeon HD 6750M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.58.4-P2P
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: WDC WD5000AAKS-402AA0, 500,11 GB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 3
USB Device: USB to Serial-ATA bridge, 0x04fc (SUNPLUS TECHNOLOGY CO., LTD.), 0x0c25, 0xfa120000 / 6
USB Device: iLok, 0x088e, 0x5036, 0xfa130000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: UM-2G, 0x0582 (Roland Corporation), 0x0106, 0xfd140000 / 5
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 3
FireWire Device: Digi 002Rack, Digidesign, 400mbit_speed
thanks everyone
e
Maybe you are looking for
-
Hi all, I am trying to update a line information in OE_ORDER_LINES ALL using apps adapter from SOA SUITE to EBIZ. I already used a PL/SQL API "UPDATELINE" under OE_ORDER_PUB which is not helping since the values not really matching with the fields in
-
Issue with Unzip in V2 with templates
HI All, I have been using the unzip functionality successfully in my V2 environment but I have an issue. Is it possible to unzip the files which then create the page hierarchy but force then to use a specific page group template. At present when I un
-
I have 1 itunes library with a phone and ipod linked to it. My daughter just got a touch. She would like to have some of my music downloaded into her touch. How can I do that without having her linked to my library?
-
Using the XSLT processor for non-workbench XSLT
Hi there, is it possible to use the built-in XSLT processor for arbitrary XSLT transformations which aren't checked in in the ABAP workbench but instead given as a runtime object (string or iXML)? Instead of the built-in command CALL TRANSFORMATION w
-
Security violation error (error code 2148532330) in Acrobat Pro XI with Windows 8
I have two certificates, physically residing on the same (Belgian) government issued smart card. One is labeled "Authentication" (Intended usage: sign transaction), and the other is labeled "Signature" (Intended usage: sign document). I have been try