SO line Update

Hi all,
I am trying to update a line information in OE_ORDER_LINES ALL using apps adapter from SOA SUITE to EBIZ. I already used a PL/SQL API "UPDATELINE" under OE_ORDER_PUB which is not helping since the values not really matching with the fields in OE_ORDER_LINES_ALL.
Can any body tel how can i update SO line information using any API through apps adapter?
Thanks
Anand.U

Hi;
All APIs are listed in Oracle Integration Repository
http://irep.oracle.com/index.html
API User Notes - HTML Format [ID 236937.1]
R12.0.[3-4] : Oracle Install Base Api / Open Interface Setup Test [ID 427566.1]
Oracle Trading Community Architecture API User Notes, June 2003 [ID 241320.1]
Technical Uses of Customer Interface and TCA-API [ID 269121.1]
Pelase also check below:
Api's in EBS
Re: Api's in EBS
http://sairamgoudmalla.blogspot.com/2009/05/script-to-find-oracle-apis-for-any.html
API
Fixed Asset API
List of API
Re: List of APIs
Oracle Common Application Components API Reference Guide
download.oracle.com/docs/cd/B25284_01/current/acrobat/jta115api.pdf
List of APIs and open interface R12
Re: List of APIs and open interface R12
Regard
Helios

Similar Messages

  • Error while running base line update

    I am getting below error while running baseline update in endeca environment. please help me out to resolve this issue.
    ./baseline_update.sh
    WARNING: /opt/endeca/PlatformServices/6.1.0/j2sdk/bin/java does not exist
    WARNING: Using java in /usr/java/jdk1.6.0_25/bin/java
    [11.29.12 13:15:00] INFO: Checking definition from AppConfig.xml against existing EAC provisioning.
    [11.29.12 13:15:02] INFO: Definition has not changed.
    [11.29.12 13:15:02] INFO: Starting baseline update script.
    [11.29.12 13:15:02] INFO: Acquired lock 'update_lock'.
    [11.29.12 13:15:02] INFO: Downloading config files from Web Studio.
    [11.29.12 13:15:02] INFO: [ITLHost] Starting shell utility 'emgr_update_get_ws_settings'.
    [11.29.12 13:15:03] SEVERE: Utility 'emgr_update_get_ws_settings' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host ITLHost.
    Occurred while executing line 13 of valid BeanShell script:
    10| if (Forge.isDataReady()) {
    11| if (ConfigManager.isWebStudioEnabled()) {
    12| // get Web Studio config, merge with Dev Studio config
    13| ConfigManager.downloadWsConfig();
    14| ConfigManager.fetchMergedConfig();
    15| } else {
    16| ConfigManager.fetchDsConfig();
    [11.29.12 13:15:03] SEVERE: Caught an exception while invoking method 'run' on object 'BaselineUpdate'. Releasing locks.
    Caused by java.lang.reflect.InvocationTargetException
    sun.reflect.NativeMethodAccessorImpl invoke0 - null
    Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
    com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
    Caused by com.endeca.soleng.eac.toolkit.exception.EacComponentControlException
    com.endeca.soleng.eac.toolkit.utility.Utility run - Utility 'emgr_update_get_ws_settings' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host ITLHost.

    Welcome to forum, Please raise only one thread for same problem..
    error while running base line update
    -RMishra

  • Problems re-installing after on-line updates cause version change from install CD

    I'm running AcroPro 6 updated to 7.1 through on-line updates, on laptop and was on desktop. The laptop runs just fine with no issues, and Acrobat 6 does everything that I need done, so I don't have any desire to upgrade to the latest and greatest. Problems with Acrobat on the desktop caused me to uninstall it, and I couldn't reinstall it.
    Now, using the laptop in conjunction with the desktop isn't the most convenient because I'm creating documents on the desktop, and then have to port them to the laptop, do whatever is needed there in Acrobat, and then port back. Usually all that I need to do is to assemble a pdf from separate pages, insert or remove pages from a pdf, or to apply security. Nothing particulary fancy.
    Acrobat on the desktop worked fine for many years, but at some point reported an issue finding the printer, and refused to print anything. After trying everything I could think of as a possible solution I, perhaps foolishly, uninstalled Acrobat with the intention of reinstalling it and having the problem resolved. On attempting to reinstall, starting from the original Acrobat 6 CD, the installer reported that a later version of the software was installed, and exited. It would seem that simply uninstalling Acrobat leaves sufficient references in registry or other places for the last update applied to be determined during installation.
    There seem to be two possible options so that I can avoid the, to me, unneccesary expense of upgrading to the latest version of Acrobat.
    Locate and remove the source of the data that the Acrbat 6 installer is reading and which causes the installer to exit, or
    Slipstream the updates (to 7.1) into the Acrobat 6 installation files, so that the version I would be attempting to install is the same as the verion that I uninstalled.
    I tried scanning registry to find all references to Acrobat and or Acrobat 6, but I'm not certain this is the best way. Missing one might be critical, and removing them might just cause worse problems.
    I tried slipstreaming the Acrobat 6 installer, but it fails using the msiexec /a switch, as it appears that Acrobat 6 wasn't designed to work with an administrative install point, according to the pop-up dialogue box.
    My problem is that while I just want to reinstall Acrobat 6, update to 7.1, and go on happily, I can't see how to do this. Can anyone advise if there is a solution other than upgrading?
    Thanks in advance for you thoughts, all will be appreciated!

    Thanks John, Bill and Graffiti for your interest!
    The original install, many years ago, was of an education version from a local college. As updates became available thorough the update manager, they were installed. As stated above, it updated though 6.0 to 6.6, and then on to 7, eventually to 7.1! I can only repeat what happened, but not explain it. I thought nothing of it at the time, as it was all being managed by the update manager. I agree that this last seems to be more an upgrade than an update, but... what can I say? What happened is what happened, and it happened as I described it.
    But not's get hung up on the history! Now that I seem to have solved the original issue of not getting past the message that 'a more functional version has been detected', how does one solve the 'invalid serial number' issue that occurs when attempting to reinstall 6.0? Delete the Acrobat registry keys from HKLM and HKCU, and possibly anywhere else? The former didn't work yet, so, where else? Maybe there is an 'update' folder hanging around somewhere with a registry reference that needs to be deactivated?  Something like {AC76BA86-0000-0000-7AC5-6028747ADE00}?
    Any further thoughts? And thanks for the input, it really is appreciated!

  • PO requisition line update API

    Hi guys
    I need API or Interface to update requisition line quantity, Please help me.
    Regards
    Mazhar

    I did not understand you requirements. Are you having problems in using PO Update?
    If so kindly refer to
    How to use PO_CHANGE_API1_S.update_po to Change Three Lines (Doc ID 1077455.1)
    PO_CHANGE_API1_S.UPDATE_PO Does Not Trigger Change Request Flow and Supplier Notification (Doc ID 1946341.1)
    Using the PDOI API-PO_CHANGE_API1_S.UPDATE_PO-Which fields in the PO Line can we update? Can we use the Standard PDOI interface to insert line updates to a Standard PO? (Doc ID 1930759.1)
    Troubleshooting Assistant: Oracle Purchasing Purchase Document Open Interface and API (Doc ID 1369663.2)

  • HT201413 itune appear "error occur (21)" when i restore off line update from ios 7.0.4 to  8.1.2

    itune appear "error occur (21)" when i restore off line update from ios 7.0.4 to  8.1.2.

    Hi Myo Ko Ko Aung,
    When iTunes reports this error during the restoration of an iOS device, it typically indicates a conflict with security software.
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
    Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
    Resolve iOS update and restore errors
    http://support.apple.com/en-us/TS3694
    Sincerely,
    Allen

  • ColdFusion 10 Off-Line Updates

    Our developement server is not connected to the internet.  We cannot upgrade our production server until we are sure everything works on the new version.  Where are the CF10 updates posted for off-line updates?  The only one I can find for downloading is the CF10 Mandatory Update.

    You can do the following:
    From internet-enabled machine:
    1. Access http://download.adobe.com/pub/adobe/coldfusion/xml/updates.xml and save updates.xml to some folder, say, updates. You can use "Save As" in Chrome or View-Source in IE to save the file
    2. Access http://download.adobe.com/pub/adobe/coldfusion/hotfix_005.jar to save the latest update jar file to the same folder
    On your development server:
    1. Copy the updates folder (with updates.xml and hotfix_005.jar) to your webroot (for example, c:\Coldfusion10\cfusion\wwwroot\)
    2. Edit updates.xml to modify "cfhf_downloadlink" for "ColdFusion 10 Update 5" item to point to the update jar file location in your coldfusion webroot (for example, http://[ip]:[port]/updates/hotfix_005.jar)
    3. In ColdFusion Administrator -> Server Updates -> Settings, change local site to point to updates.xml file (for example, http://[ip]:[port]/updates/updates.xml)
    4. Cick on "Check for Updates" to get the update to show in "Available Updates"
    5. Logout and log back in (if required)
    In case you want earlier updates (say, Update 4 and earlier) too, download the required update jar file and change the corresponding "cfhf_downloadlink" entry in updates.xml for that update (as described above)
    Hope that helps.
    For more details, please check http://www.krishnap.com/

  • Small square boxes appearing on blank lines (UPDATED) - The question is, how to get rid of them?

    *******  As to my display name "All I tried were in use" - when I registered at the Adobe site to use the Browser Lab, I tried something like 10 or 12 user names and finally gave up and went with "All I tried were in use" - my name is Bob
    ------------------------------- UPDATE --------------------
    The problem, small square boxes showing on lines in Freetext Tool comments, is not limited to blank lines, as I originally reported here. These boxes are showing up at the end of every line. It does not matter if the line break is hard or soft, whether the line is empty or not.
    Please read the original post bearing mind that the  problem is occurring at the end of all lines.
    Also - here is a screen capture of a part of one comment box, showing the square lines. I didn't show the entire box because the material above the area I'm showing is a tad private or confidential. Here is the image showing the boxes - note that there is no box at the end of the last line in the comment.
    -------- Original Post ------------
    We have a copy of Acrobat 5.0. and up until now it has done what we need, which is not much more than adding bookmarks, links, and some touch up. I know it is very old and I know things change. I'm hoping this has nothing to do with the release we are using. I would think this would be a backward compatibility issue if it is a problem with newer Reader versions dealing with PDFs "edited" with 5.0.
    I am having small square boxes showing up on blank lines. (read my update above  - the boxes are at the end of all lines, soft break or hard break))
    I'm a programmer (37+ years in most all aspects of Data Processing) and I decided to learn the PHP programming "language" to add some server side processing to some of my web sites. So, I found a fairly good manual on PHP in PDF form and have been using it.
    I quickly found that the PDF didn't have a single link in it and no bookmarks, so I've been adding them as I look up a particular subject. I'm also adding comments and notes to document things not in the original manual or to add comments that would help other programmers` (who know  other languages) to adjust to PHPs' way of thinking - for example: in all the other languages I know (perhaps two dozen) to get rid of a file, you "delete" it. In PHP you "unlink" it.
    I've added a lot of comments and notes like that and when I view the PDF in Reader (on this computer I have 9.4.2) I'm seeing small square boxes on empty lines. The lines were created when I pressed Enter twice to insert a blank line between paragraphs. (again, read the update at the top of this message - the boxes are at the end of all lines, soft break or hard break)
    How can I get rid of them?
    They are not present when I've got the PDF open with Acrobat, only when I'm using an Acrobat Reader.
    They are also not present if I look at the comments using the Comments navigation panel - that is, they still show on the page, but they don't show in the copy of the comment displayed in the navigation panel.
    They are not present in Notes or when I use one of the shape tools (Square Tool, Circle Tool, or Line Tool) to create notes. They are only present in Freetext Tool comments
    They are clearly being show where there are successive line feed/carriage return characters - but how do I get rid of them?
    I JUST THOUGHT OF SOMETHING - I realized that I'd not printed any of the pages on which I have placed comments and wondered if the boxes show when printing the PDF with Reader -- they do. They are not present if I use Acrobat, not a Reader, to print the same page.
    Any assistance you can provide will be greatly appreciated.
    Please don't tell me to get a newer version - an expenditure like that is simply and totally out of the picture. For us, this is a Depression, not a Recession - we are self-employed and our businesses have been severely hammered since 2006 - we are down to about 1/4 of our income before the big guys trashed the economy.
    Bob
    P.S. Do you know that you can have a heart attack without chest pain, shortness of breath, or left arm  pain? Well, you can! I've had two and the first one nearly killed me because I had no clue it was a heart attack. You can read about it first one here.  Pass this on, it could save a life.
    My second heart attack occurred on October 4, 20112 - it began, around 3:15 AM, as the first one did, with a headache. It turned out the stent implanted in 2002 had been completely clogged by too much tissue grown. The doctor put another stent inside the first one.

    Problem Resolved - it is a font issue. Apparently Acrobat can't handle particular fonts and it is best to stick with a very small slection of fonts - Arial, Helvetica, Times Roman.
    I haven't test a lot of fonts. If I do, I'll post there results here.
    Bob

  • AP Invoice Line Update

    Hi All,
    I just want to know how to update INVOICE LINE table by using any interface or by any API.
    Please need urgent.

    Hi;
    All APIs are listed in Oracle Integration Repository
    http://irep.oracle.com/index.html
    API User Notes - HTML Format [ID 236937.1]
    R12.0.[3-4] : Oracle Install Base Api / Open Interface Setup Test [ID 427566.1]
    Oracle Trading Community Architecture API User Notes, June 2003 [ID 241320.1]
    Technical Uses of Customer Interface and TCA-API [ID 269121.1]
    Pelase also check below:
    Api's in EBS
    Re: Api's in EBS
    http://sairamgoudmalla.blogspot.com/2009/05/script-to-find-oracle-apis-for-any.html
    API
    Fixed Asset API
    List of API
    Re: List of APIs
    Oracle Common Application Components API Reference Guide
    download.oracle.com/docs/cd/B25284_01/current/acrobat/jta115api.pdf
    List of APIs and open interface R12
    Re: List of APIs and open interface R12
    Regard
    Helios

  • Are pick released lines updated real time?

    Hello,
    When you pick release an order do the delivery detail line status get updated in the wsh_delivery_details table as they are released individual or after the pick release program finishes pick releasing the entire order?
    Thanks for any information you can provide.

    - We have a third party warehouse management system that will do the shipping.
    - So when orders are in a pick release status we send that order to the warehouse.
    - We look at the following tables for the pick released orders in real time: WSH_DELIVERY_DETAILS,wsh_new_deliveries
    So the problem occurs when the pick release program is running.
    It will first insert the header of the order in the wsh_new_deliveries table and then as the order lines are being pick released it updates the WSH_DELIVERY_DETAILS table.
    Our interface starts when it sees a new order in the wsh_new_deliveries table. The interface will then pick all the pick released order lines. But because the pick release program is still pick releasing the lines the interface will only pick a subset of the pick released lines.
    So we don't know when the pick release program is finished finished pick releasing the lines.
    Of course we can add a time delay but there is never a guarantee.

  • Command line update of 9.1.3 to 9.2?

    OK, I downloaded the MUI updater to 9.2 (the only one I could find), unzipped it, but the AdbeRdrUpd920_mui_cum.msp file tells me I don't have an updatable product installed.  I've used the 9.1.1 9.1.2 9.1.3 msp's to patch my 9.1 installs up to this point, but now this msp won't work.  Plus this one is lik 20MB, where the others were 2-6MB.
    Anyone gotten this to work yet?  Is there another msp file somewhere I should be using?

    Hey if you are looking for Adobe reader you can download the latest reader from http://get.adobe.com/reader/?promoid=BUIGO. If you are looking for MUI reader patch you can get it from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4542 . Hope this helps.

  • On-Line Update in Table TEVEN from Single time capturing Device

    Hi Gurus,
    We are trying to capture Time Events captured in Employee Card Swapping System (PDC) in TEVEN.
    Issue is We have only one device.
    How to determine P10 or P20 against each Time events and transfer them to TEVEN.
    We expect online update in TEVEN.
    Can somebody throw some light.
    Regards.
    Tapas

    If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
    If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
    As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
    If there are specific tasks you need help with:
    http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
    Is a good resource.
    Peter

  • Just did the on line update for 3g phone and wiped out all my songs. I have the songs still on my laptop but now phone won't sync

    How can I get my phone to sync and put the songs back? I also made back up discs but it won't sync.

    Thanks but I solved the problem...it was really simple. Out of 160GB I had only used 34GB, so I knew I had space. What happened was in the process of downloading songs I also downloaded a few episodes of United States of Tara, which was taking a long time to download so even though it said I had 1019 songs the 26 undownloaded were on iCloud, not on my computer. So I paused the downloading of my episodes so my songs could finish downloading. Now my iPod and computer are in sync.
    I don't know how this works so I'll give the points anyway, for being the only one who attempted to solve my problem.

  • A problem occurs when i use function to update a bom line

    this is my first time to ask for help here. i am from china. hope to find a solution for my problem here.
    here is my problem:
    what i need is to update a bomline. this is my way: delete the old bomline and add a new one. the update operation is successful.
    but it leads to another problem: some data in CA03 lost. for example: operation, sequence, backflushing, create on, create by, valid from.
    so i think the data loss happens when i delete a bomline.
    here is my solution:
    before deleting a bom line. get the lost data and save it in memory.
    after add a new bom line. update the data in CA03.
    how about it? any better ideas?
    if it is a good way , i do not know where to get the data i want.which table or which funtion? and use which BAPI to update the data in ca03
    i realy appreciate it if you provide any suggestion

    This is common to people using Windows.  You need to disable all firewall, antivirus, and antimalware programs.

  • Price break up lines import - Line number getting updated

    Hi All,
    I am importing price breakup shipment lines for Blanket agreements.
    I need to update the effective from date and to date for the existing line (Update)
    And should create a new break up line with some updated prices.
    This process is getting imported fine, but for the line which need update of dates, a new line num is getting updated. I mean if existing line is 1 after import the same line number is updated to 2. When I pass the line number to interface table, it is error out.
    Finally my requirement is to import new lines with new line number(which is working fine) and Update the existing lines with keeping the line num.
    Please let me know if I am not clear.
    Thanks.
    Edited by: DharV on Sep 20, 2011 8:46 PM

    Hello Sudha ,
    I agree with Alex. Value-based commitment indicator has to be set.
    I wanna add two notes:
    634298     FAQ: Commitment update in the service
    433597     Commitment update for services or invoicing plan
    If you need to correct commitments, you can use RKANBU01 (as described in note 152571)
    Cheers,
    Lucas

  • Need Sample API code to update Quote Line level Unit Selling Price alone.

    Hi,
    i want to update Unit Selling Price alone using API, can any one have sample code to do that.
    ASO_QUOTE_PUB.Update_Quote_Line
    Thanks!
    Kishore

    Hi,
    please find the code below for ASO Quote Line Update. Here this sample only shows an DFF Attribute update. You can try the same for the Unit Selling price Update.
    DECLARE
    l_Api_Version_Number NUMBER;
    l_Init_Msg_List VARCHAR2(1000);
    l_Commit VARCHAR2(1000);
    l_Validation_Level      NUMBER;     
    l_Qte_Header_Rec ASO_QUOTE_PUB.Qte_Header_Rec_Type;
    l_Qte_Line_Rec ASO_QUOTE_PUB.Qte_Line_Rec_Type;
    l_Control_Rec ASO_QUOTE_PUB.Control_rec_Type;
    l_Qte_Line_Dtl_TBL ASO_QUOTE_PUB.Qte_Line_Dtl_tbl_Type;
    l_Line_Attribs_Ext_Tbl ASO_QUOTE_PUB.Line_Attribs_Ext_Tbl_type;
    l_Payment_Tbl ASO_QUOTE_PUB.Payment_Tbl_Type;
    l_Price_Adj_Tbl ASO_QUOTE_PUB.Price_Adj_Tbl_Type;
    l_Price_Attributes_Tbl ASO_QUOTE_PUB.Price_Attributes_Tbl_Type;
    l_Price_Adj_Attr_Tbl ASO_QUOTE_PUB.Price_Adj_Attr_Tbl_Type;
    l_Shipment_Tbl ASO_QUOTE_PUB.Shipment_Tbl_Type;
    l_Tax_Detail_Tbl ASO_QUOTE_PUB.Tax_Detail_Tbl_Type;
    l_Freight_Charge_Tbl ASO_QUOTE_PUB.Freight_Charge_Tbl_Type;
    l_Sales_Credit_Tbl ASO_QUOTE_PUB.Sales_Credit_Tbl_Type;
    l_Quote_Party_Tbl ASO_QUOTE_PUB.Quote_Party_Tbl_Type;
    l_Update_Header_Flag VARCHAR2(100);
    X_Qte_Line_Rec ASO_QUOTE_PUB.Qte_Line_Rec_Type;
    X_Qte_Line_Dtl_TBL ASO_QUOTE_PUB.Qte_Line_Dtl_TBL_Type;
    X_Line_Attribs_Ext_Tbl ASO_QUOTE_PUB.Line_Attribs_Ext_Tbl_type;
    X_Payment_Tbl ASO_QUOTE_PUB.Payment_Tbl_Type;
    X_Price_Adj_Tbl ASO_QUOTE_PUB.Price_Adj_Tbl_Type;
    X_Price_Attributes_Tbl ASO_QUOTE_PUB.Price_Attributes_Tbl_Type;
    X_Price_Adj_Attr_Tbl ASO_QUOTE_PUB.Price_Adj_Attr_Tbl_Type;
    X_Shipment_Tbl ASO_QUOTE_PUB.Shipment_Tbl_Type;
    X_Tax_Detail_Tbl ASO_QUOTE_PUB.Tax_Detail_Tbl_Type;
    X_Freight_Charge_Tbl ASO_QUOTE_PUB.Freight_Charge_Tbl_Type;
    X_Sales_Credit_Tbl ASO_QUOTE_PUB.Sales_Credit_Tbl_Type;
    X_Quote_Party_Tbl ASO_QUOTE_PUB.Quote_Party_Tbl_Type;
    lX_Return_Status VARCHAR2(1000);
    lX_Msg_Count NUMBER;
    lX_Msg_Data VARCHAR2(1000);
         lc_last_update_date date;
         l_file varchar2(2000);
         CURSOR c_quote(c_qte_header_id NUMBER) IS
         SELECT last_update_date
         FROM ASO_QUOTE_HEADERS_ALL
         WHERE quote_header_id = c_qte_header_id;
    BEGIN
         BEGIN
         MO_GLOBAL.init('SQLAP');
         MO_GLOBAL.set_policy_context('S',83);
         fnd_global.apps_initialize(1175,50689,280);
         END;
         OPEN c_quote(l_qte_header_rec.quote_header_id);
         FETCH c_quote INTO lc_last_update_date;
         CLOSE c_quote;
         aso_debug_pub.SetDebugLevel(10);
    aso_debug_pub.Initialize;
    l_file:= ASO_DEBUG_PUB.Set_Debug_Mode('FILE');
    aso_debug_pub.debug_on;
    aso_debug_pub.add('Update Quote',1, 'Y');
    dbms_output.put_line('File :'||l_file);
    dbms_output.put_line( to_char(sysdate, 'mm/dd/yyyy:hh24:SS') );
         l_qte_header_rec.quote_header_id := 24649;
         l_qte_header_rec.last_update_date := lc_last_update_date;
         l_control_rec.last_update_date := lc_last_update_date;
         l_qte_line_rec.quote_header_id := 24649;
         l_qte_line_rec.quote_line_id := 27712;
         l_qte_line_rec.attribute12 := 1000;
         ASO_QUOTE_PUB.Update_Quote_Line(
    P_Api_Version_Number => '1.0',
    P_Init_Msg_List =>     l_Init_Msg_List,
    P_Commit =>     l_Commit,
    P_Qte_Line_Rec =>     l_Qte_Line_Rec,
    P_Control_Rec =>     l_Control_Rec,     
    P_Qte_Line_Dtl_Tbl =>     l_Qte_Line_Dtl_Tbl,
    P_Line_Attribs_Ext_Tbl =>     l_Line_Attribs_Ext_Tbl,
    P_Payment_Tbl =>     l_Payment_Tbl,     
    P_Price_Adj_Tbl =>     l_Price_Adj_Tbl,     
    P_Price_Attributes_Tbl =>     l_Price_Attributes_Tbl,
    P_Price_Adj_Attr_Tbl =>     l_Price_Adj_Attr_Tbl,
    P_Shipment_Tbl =>     l_Shipment_Tbl,
    P_Tax_Detail_Tbl =>     l_Tax_Detail_Tbl,
    P_Freight_Charge_Tbl =>     l_Freight_Charge_Tbl,
    P_Update_Header_Flag =>     l_Update_Header_Flag,
    X_Qte_Line_Rec =>     X_Qte_Line_Rec,
    X_Qte_Line_Dtl_Tbl =>     X_Qte_Line_Dtl_Tbl,
    X_Line_Attribs_Ext_Tbl =>     X_Line_Attribs_Ext_Tbl,
    X_Payment_Tbl =>     X_Payment_Tbl,
    X_Price_Adj_Tbl =>     X_Price_Adj_Tbl,
    X_Price_Attributes_Tbl =>     X_Price_Attributes_Tbl,
    X_Price_Adj_Attr_Tbl =>     X_Price_Adj_Attr_Tbl,
    X_Shipment_Tbl =>     X_Shipment_Tbl,
    X_Tax_Detail_Tbl =>     X_Tax_Detail_Tbl,
    X_Freight_Charge_Tbl =>     X_Freight_Charge_Tbl,
    X_Return_Status =>     lX_Return_Status,
    X_Msg_Count =>     lX_Msg_Count,
    X_Msg_Data =>     lX_Msg_Data
    fnd_msg_pub.count_and_get( p_encoded => 'F'
    , p_count => lx_msg_count
    , p_data => lx_msg_data);
    dbms_output.put_line('no. of FND messages :'||lx_msg_count);
    for k in 1 .. lx_msg_count loop
    lx_msg_data := fnd_msg_pub.get(
    p_msg_index => k,
    p_encoded => 'F');
    dbms_output.put_line('Error msg: '||substr(lx_msg_data,1,240));
    end loop;
    dbms_output.put_line(lx_return_status);
    dbms_output.put_line(to_char(lx_msg_count));
    dbms_output.put_line(lx_msg_data);
    dbms_output.put_line('end');
    END;     
    COMMIT;
    Thanks
    Sunil Devulapally
    Edited by: user13150483 on 05-Jan-2012 10:59

Maybe you are looking for