I lose changes made in settings on every sync

i changed my menu settings when i got my new nano yesterday. then when i synced it, it had gone back to factory settings (only the menu - not the whole lot) - so I have attached it 4 times now and had to readjust my menu each time.
anyone have any hints or do i just wait for the next firmware update? of course i plan to get a new one form apple care because of the screen tilt - maybe this issue is specific to this nano!?

I am seeing the same issue, but it is not the sync, it's when the batteries run out. It's not all settings though. If I add "playlists" to the main menu it always disappears when the battery dies. Others I'm not sure. I don't see Many people with this issue as apposed to the photo and album art issues I see. 1.0.1 did not fix this. I hope it's not hardware.

Similar Messages

Firefox crashes about 5 seconds after start up. Has worked fine for months. No changes made to settings etc

*resolved*

If you are running Firefox 3.6.13, you really should update to Firefox 12, as the version you have is very insecure, unstable and out of date. I'm assuming since you marked as resolved you got your issue taken care of.

Changes made to music in iTunes synced to iCloud?

If I make changes to music in iTunes (e.g., changing the artist's name, adding album name, etc), how do I get these changes to be reflected on iCloud? Do I need to rematch? If so, will the outdated match on iCloud be deleted?

They would only be reflected automatically if you have subscribed to iTunes Match. Otherwise, you would have to sync with iTunes for the changes to be transfered to your devices.

I just bought an iPhone 4S 3 days ago, but its battery seems to lose 1% every 3-4 minutes. I tuned off some location services, bluetooth, and even siri, and made its settings similar to my two-year old iPhone 4. The 4S can last much shorter.

I just bought an iPhone 4S 3 days ago, but its battery seems to lose 1% every 3-4 minutes. I tuned off some location services, bluetooth, and even siri, and made its settings similar to my two-year old iPhone 4. The 4S can last much shorter. I’m not sure what I can do with the 4S?

I am having the exact same problem with my iphone 5.
I took it back to the Apple store 2 days ago and they gave me a new one, but they told me not to restore it from backup cos if something (an app) is corrupted it will happen again. The only thing they could keep was my contacts cos they did something there that allowed them to transfer them to the new phone. I went home, and downloaded only ONE app (facebook), and guess what - THE PROBLEM IS STILL OCCURING ON THE BRAND NEW PHONE! It is driving me insane as I cant get through the day without my phone.
Really hoping someone has a fix that will work

When I receive and answer e-mail, the correspondence is usually "nested" with the original message, and the number of replies, etc. are indicated with a number next to the original message. How can I change the mail settings so that every reply is listed

When I receive and answer e-mail, the correspondence is usually "nested" "behind" the original message, and the number of replies, etc. are indicated with a number next to the original message in the inbox. How can I change the mail settings so that every reply is listed individually in the inbox instead of having them "stacked" behind the original message. I'm afraid I might accidentially overlook messages the way they are handled now.

Somebody here will correct me if I'm wrong, but what you have to do is go into Settings, Mail/Contacts/Calendars and under Mail, turn off "Organize by Thread". I think that will make each message show individually.

I changed ISPs and had to change the server settings. Now one of my two email addresses crashes every time I try to read the emails.

At first Thunderbird downloaded every email from the problem account going back to 2011. I changed the server settings to only download emails from the last 15 days and to delete any messages older than 15 days.
I can send emails from this account and my other email account works fine for sending and reading mail. However, this problem account crashes Thunderbird every time I try to read the messages. There are now only 300 messages in the inbox and I've been able to have them marked as read. But I still can't read any of them.
What's the fix on this?

Try to start *Windows* in safe mode with networking enabled.
- Win8 http://windows.microsoft.com/en-US/windows-8/windows-startup-settings-including-safe-mode
- Win7 http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode
- XP http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx
Still in Windows safe mode, start Thunderbird in safe mode.
- https://support.mozilla.org/en-US/kb/safe-mode
Does the problem go away?

How to change icloud email? It wasn't me who made it. So every time I used my Apple ID is linked to that email?

How to change icloud email? It wasn't me who made it. So every time I used my Apple ID is linked to that email?

Once you have created an iCloud account and chosen an @icloud.com address to go with it you can't change that address (short of creating an entirely new account).
However, all is not lost. You can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a

Why does the port settings on my iPad change every time I sync with my computer. After syncing I have to go in and change the port settings so I can send and receive emails on my iPad.

Every time iSync my iPad 2 with my computer it changes the port settings. Has anyone else had this issue?

When you sync the iPad, do you have mail settings configured to sync to the iPad? You could have different settings on your computer that might be affecting the email set up on the iPad when you sync.

HOW TO SEE CHANGES MADE IN VKOA SETTINGS

Hi,
Can anyone tell me how to see the changes made in VKOA settings.I think some one has changed the G/Ls in my VKOA settings.I want to see the who has made the changes and when and all details regarding it.
warm regards
Somnath Chatterjee

Dear somnath
In VKOA, double click any Tab which you normally make use of it. Now on top choose "Selection - Deleted Entries".
Thanks
G. Lakshmipathi

Every time I sign in, it signs me out immediately. I've tried deleting the opm file and it's unable to do so because "Adobe CC is currently running this file." I've also changed my LAN settings and downloaded something else that was supposed to help me ou

Every time I sign in, it signs me out immediately. I've tried deleting the opm file and it's unable to do so because "Adobe CC is currently running this file." I've also changed my LAN settings and downloaded something else that was supposed to help me out but nothing seems to fix the problem.

I think you'll find that the official Adobe advice here is misguided. First, deleting bits of the program and program data is, as you've noted, perilous and often impossible. Shame on Adobe for doing such a poor job of coding that such steps are needed.
The solution I recommend is as follows:
Restart your Windows machine and boot in "Safe Mode" with networking using the F8 key just as Windows starts.
Go to the Control Panel and select Programs. Find and Uninstall "Adobe Creative Cloud Desktop".
Reinstall it by downloading it from the website https://creative.adobe.com/products/creative-cloud
Restart your machine.
Only in "Safe Mode" are you likely to be able to accomplish these tasks reliably.

HT5622 Can i change my apple id on some devices that i have and not lose my apps and settings?

Can i change my apple id on some devices that i have and not lose my apps and settings?

Yes. However, note that all Apps purchased/downloaded under one Apple ID will forever be tied to it, and will require it to update. They will run, but will not update without the other Apple ID
You can go to Settings->iTunes & App Stores->Apple ID and change it there for the stores.
You can also go to Settings->iCloud, Facetime, Messages, and change it for those individual services.

I have a mac 10.5 and need help figuring out how to change my email settings so it does not automatically delete my inbox every 30 days. How to I adjust the mail settings?

I have a mac 10.5 and need help figuring out how to change my email settings so it does not automatically delete my inbox every 30 days. How to I adjust the mail settings?

I think it must be an IMAP account then, & in Mail>Preferences>Accounts>Advanced>Keep copies for Offline viewing:>Don't keep copies, then on the Server, or maybe it's just this one itself, but on the Server you have a setting to remove eMails after 30 days.
If it's a POP account we'd have to investigate that... but you didn't say so I'm guessing here.

Will I lose changes that I have made to song info if I start using iTunes match?

Will I lose changes that I have made to song info (like genre) if I start using iTunes match? Also, if I make song info changes to purchased songs, will I lose those changes with iTunes match?

Some people have reported issue with metadata but I personally have had few problems with metadata changes. I have not had any data arbitrarily changed apart from a few issue with purchased tracks where initially so es changes did not stick but eventually did.
JIm

Changes made in book file are not reflected in RH when book is updated

I'm using RH7 in TCS1. (I know, I know, everybody else is on RH8 in TCS2). I've added a book file by reference to my project. Then I made a few changes to titles in my FM book, then updated my project, but none of the changes have been made in RH.
Any ideas?

You're not the only one using TCS1. I, too, must endure Adobe's initial FM-RH Integration software offering with its limited patches and multiple workarounds (I don't sound bitter, do I?).
Do you have the latest patches?
When you say you modified titles in your FM book, did you modify the document titles from the book file, thereby changing the file names? Or did you change heading styles within a FM document/chapter?
If you changed the file name in any way, verify in the RH Project Manager that all links to the referenced FM files are not broken. If any file links are broken, you can resolve them in the RH Project Manager.
Changing a heading name within a FM document should not cause you this grief, as long as the file links between FM and RH remain intact.
As I don't know your level of experience, I'll make an suggestion to someone new to FM-RH integration (although, since you're using TCS1, I presume you are an experienced user). When updating the RH project, are you selecting Force Update or Update All. Force Update applies changes made in FM to your RH project. Update All only applies changes made in RH.
Also, RH has a feature that allows you to select specific topics to ignore when running a Force Update (i.e. changes in FM won't be applied to the selected topics). Make sure no topics are selected for this purpose.
If all else fails (and I don't recommend this unless you tried every other possibility), delete and re-import the book. There's another thread that helps you through this process without you having to manually reapply your settings.
Good luck!

Changes made in Book Module do not "stick" when the book has been duplicated

Lr 5.2 stand-alone version (not CC) – Win 7 64-bit
I had made a duplicate of the book (right-click the book Collection and select <Duplicate>). Then I made changes to the original book – changed the font for captions and for body; changed the wording of the body text; changed the padding for images. At some point in the process these changes did not '”stick” anymore. The changes were visible as long as I worked in the Book Module. But the changes were gone and the book reverted to the previous state as soon as I went to the Library and back to the Book Module. Same thing happened when I closed Lr and re-opened it.
Replacing the Preference File did not change this behavior. But when I deleted the duplicate book the behavior of Lr went back to “normal”, i.e. the changes now “stick”.
In my opinion there must be a bug that prevents that changes “stick” when after a Duplicate of a book has been created.

You're not the only one using TCS1. I, too, must endure Adobe's initial FM-RH Integration software offering with its limited patches and multiple workarounds (I don't sound bitter, do I?).
Do you have the latest patches?
When you say you modified titles in your FM book, did you modify the document titles from the book file, thereby changing the file names? Or did you change heading styles within a FM document/chapter?
If you changed the file name in any way, verify in the RH Project Manager that all links to the referenced FM files are not broken. If any file links are broken, you can resolve them in the RH Project Manager.
Changing a heading name within a FM document should not cause you this grief, as long as the file links between FM and RH remain intact.
As I don't know your level of experience, I'll make an suggestion to someone new to FM-RH integration (although, since you're using TCS1, I presume you are an experienced user). When updating the RH project, are you selecting Force Update or Update All. Force Update applies changes made in FM to your RH project. Update All only applies changes made in RH.
Also, RH has a feature that allows you to select specific topics to ignore when running a Force Update (i.e. changes in FM won't be applied to the selected topics). Make sure no topics are selected for this purpose.
If all else fails (and I don't recommend this unless you tried every other possibility), delete and re-import the book. There's another thread that helps you through this process without you having to manually reapply your settings.
Good luck!

I lose changes made in settings on every sync

Similar Messages

Maybe you are looking for