I lost my add and edit function on my contact list

I lost my add and edit function in my contact app.

Thanks for this tip. Had this problem with my ipad. Brought it to my local Apple store. Two employees in the store I spoke with had never heard of this issue (including one @ the "genius" bar who suggested to just restore from my laptop). This fixed my issue! Thanks

Similar Messages

  • WHY DID THEY DO THIS? lOADED UPGRADES LOST ALL RINGTONES  AND EDIT RINGTONE BUTTONS ON CONTACTS

    lOST ALOT OF FEATURES WHEN I UPGRADED.wHY DID THEY CALL IT AN UPGRADE AND ALL IT DID WAS TRASH MY RINGTONES?

    go back to your computer and when you sync it, uncheck your ringtones...then after it syncs like that...RE sync it again with each ringtone checked..It should be back on your phone. I had the same problem!!!

  • HT5824 how can i add and edit my contatcs from my iphone

    Hello please help me ..
    how can i add and edit my contatcs from my iphone

    Hello there ttikkiscy,
    It sounds like you would like to know how to add to and edit your iCloud Contacts. First make sure you are using the iCloud Contacts function with this article:
    iCloud: Change iCloud feature settings
    http://support.apple.com/kb/PH2613
    On your iOS device’s Home screen, go to Settings > iCloud, then tap to turn on or off iCloud features.
    Once that is turned on and you can see your contacts in the Contacts app, use this part of the iPhone Basics guide here http://support.apple.com/kb/TI138
    Create and edit a contact.
    In Contacts, tap + to pull up a new contact card. Enter the person’s info and tap Done.
    To edit a contact, pull up the card and tap Edit. Make your changes and tap Done to save.
    To delete, scroll down, and tap Delete Contact.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • HT4639 Is there a probability in future versions of keynote for ios to add and edit action builds?

    Is there a probability in future versions of keynote for ios to add and edit action builds?
    Thanks in advance

    Nobody in these forums can tell you anything about Apple's plans for new features, but you can ask for them via
    http://www.apple.com/feedback

  • Develop and Edit functions in BC with Safari

    Hello,
    I am unable to use the Develop and Edit functions in BC with Safari, since the update of September 10.
    Am I alone or is it general?

    Nous travaillons sous Mac 10.8.4 - Safari 6.05
    Message erreur en pièce jointe
    le même message apparait sous FIREFOX 23.0.1
    Cordialement,
    PHOTEXT
    Jean-Louis VERONIQUE
    www.photext.fr
    Email : [email protected]
    02 97 40 53 03
    Le 12 sept. 2013 à 16:01, Mike Connolly <[email protected]> a écrit :
    Re: Develop and Edit functions in BC with Safari
    created by Mike Connolly in Business Catalyst - View the full discussion
    It appears to be working in my Safari 5.1.7 on Windows 7 64-bit.
    What computer are you using and which version of Safari?
    Also, what's the text of the "JavaScript" error?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5675689#5675689
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5675689#5675689
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5675689#5675689. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Business Catalyst by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I have my new i phone4, before activating how do i transfer and save details e.g contact list,  from old sim to new mini sim?

    I have my new iphone 4, before activating how do i transfer and save details e.g contacts list, from old sim to new mini sim?

    Iphone does not save anything to SIM.
    Your contacts and calendars should be on your computer (Outlook, Address Book,etc).

  • I have an iphone 4s. Recently, the phone updated and I cannot find my contact list. It looks like there are no contacts

    I have an iphone 4s. Recently, the phone updated and I cannot find my contact list. It looks like there are no contacts

    iCloud Help
    http://help.apple.com/icloud/?lang=en
    Go to Settings, then to iCloud and make sure contacts is checked...

  • How can I establish bluetooth connection with my iPhone so I can share and modify my iPhone's contact list on my macbook?

    How can I establish bluetooth connection with my iPhone so I can share and modify my iPhone's contact list on my macbook?

    The Mac and iPhone sync with iTunes though the charge cable that is included with the iPhone. Through this, you can sync your calendars and contacts.
    Bluetooth is an impractical sync scheme as the time it would take to say transfer your song catalog could be longer than your phone contract. I suppose it is entirely possible to implement with hacks and jailbreaking, but I am fairly sure it is beyond the rules here to discuss such activities.
    You may wan tto ask this same question in the iPhone section of the comminitie here. There may be some workarounds for just contacts.

  • Contacts Add and Edit does not work

    Recently I find that I am unable to Add ot Edit a contact. All other functions of the BB are working fine. The BB & the BES account have both been reset in a hope to solve the problem.
    Does anyone else have similar issues and have a solution for the same?

    This is normally caused by a bad release of the updates of RIM's IM apps (Windows Live, Gtalk, Yahoo) - you need to delete them and reboot your phone

  • No contacts in Lync 2013 client and not appearing in others contact lists

    Hello all,
    I hope someone might be able to help out with this problem, I've been at it for weeks with no luck. I've migrated from Lync 2010 to 2013. All users have been successfully migrated and everything is working for them, except for one user (which i me unfortunately).
    When I sign into Lync from any device (desktop, laptop, windows phone, iphone) I do not see any contacts in my organization, but I can find any of the contacts if i search for them. I also don't appear in anyone else's contact list, but they can find me if
    they search. 
    I have tried disabling and removing my account from Lync server, uninstalling and reinstalling the Lync client on my machine, cleaning up all the Lync folders and registry keys on my machine. Nothing seems to get me any closer to getting this fixed. 
    I did find a discussion
    here that is exactly the problem I'm having, but I don'e see a solution there either.
    Has anyone else seen this before? Any suggestions or ideas would be very appreciated.
    Thanks in advance!

    I am afraid your Lync account lose the user data contact list when you move user from Lync Server 2010 to Lync Server 2013.
    Please try to move the user back to Lync server 2010 to check if the contact list is stored.
    You can use the tool DBIMPEXP.exe to back up specific user’ data from Lync Server 2010 and import the data to Lync Server 2013 with the command Import-CSUserData which is introduced in Lync Server 2013.
    Before you import the data, you need to use the command Convert-CSUserData to convert exported user data to the data format used by Microsoft Lync Server 2013.
    For the details, please check
    http://www.shudnow.net/2012/10/09/dbimpexp-exe-functionality-integrated-into-lync-2013-preview-management-shell/
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
    found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Lisa Zheng
    TechNet Community Support

  • First name and last name order in contact list

    Actually, my contact list is displayed with the last name before the first name, but everything is fine in Address Book settings (I choosed "First name, Last name" option), and I checked that first name and last name has not been reversed for some reasons between two fields, the first name is right in place, as is the last name.
    So changing this is AddressBook has no effect.
    I tried disabling Chax, without success.
    It could be possible this problem occured when I enabled Microsoft Exchange address book synchronization, (iSync reported 500+ changes in AB database, I did it anyway and noticed no problems in data after synchronization (I still have a backup :-))
    One more thing , the displayed name in the iChat menu extra is correct.
    So, what could possibly change this behavior I did not already check ?
    Powerbook Aluminium 15" 1,2GHz | iPod | iPod Shuffle | iSight | MX900   Mac OS X (10.4.6)  

    Hi Yann,
    If you add details to the Address card in iChat as you add a Buddy then you need the first set of instructions I posted.
    You nee this menu in iChat http://www.flickr.com/photos/90943061@N00/135575605/
    In the second section of this menu you can sort the list.
    <hr>
    Ahhh. I see what you mean.
    iChat does in fact always display First Name, Last Name as you say.
    Adding a Buddy with the names in the reverse order to display as you want in iChat your Address book gets messed up as it is not consistent with those contacts that are not iChat Buddies.
    The only work around I can see is to change all the Address Book entries to match a reverse entry in iChat and then use the Address Book option to display Last Name, First name to show them the 'correct' Fist name, Last name and have them in Last name, First name in iChat.
    11:06 PM Wednesday; April 26, 2006

  • Email and Phone number added to contact list without permission?

    Just discovered an email and phone number added to my contact list under my name and its not mine! How did this happen? Can't call Apple because my 90 days has expired and they won't answer the question without me paying!! So frustrating!! Hoping someone has an answer for me??

    What is the full message of the notification ? If your phone number and email address were added to, for example, the Messages app on another device then you will need to go to that other device to remove them from it

  • I recently lost my iPhone, how do i get my contact list from my last back up on iTunes into my android phone in the meantime before i get a new iPhone?

    My iPhone was recently stolen and i had all my contact phone number which i need quite urgently on the spare android phone am using in the in, how do i get my contact list from my last back up on iTunes into my android phone in the meantime before i get a new iPhone?

    Hi If you have them on your PC, just copy them and you will need to enter, each one on Android phone by typing, them in. Cheers Brian

  • Contacts display first name, last name, except if there's email address then contact info is deleted (?) and email is displayed in contact list.

    Confused on these procedures to post.
    My contacts should list first name last name, however any contact with an email has info phone numbers and addresses deleted and the email address is displayed in contact list. I know how to change to last name first name but that doesn't help... Any suggestions? Should I delete all contacts and reacquire all through icloud? How?

    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback

  • All my windows live messenger contact have disappeared of windows messenger and appeared in my phone contact list on my curve 9360, Why, and how can I get them back where they should be?

    I went onto windows live messenger today and all my contacts have disappeared from it, but I also noticed that they had somehow now appeared in my curve 9360 phone contacts. How did this happen, and how can I get them back into windows live messenger and out of my phone contacts on my phone? This is driving me crazy, can anybody help please?
    My phone is the curve 9360, OS is 7.0.0 bundle 2259 And it was purchased Easter Monday
    Thanks.

    Thanks, but I checked iCloud and it has none of them.
    If it backed up to my laptop, that died and I just got the new computer. The one that's crashed won't even boot, so there's no way to even tell if it was syncing the contacts along with all the phone photos. Literally happened at the same time - it was because I had the new computer that I was finally able to pull the photos off the phone and make room for the upgrade. It had refused to upgrade for lack of space for some time.
    I had thought it was set to sync to iCloud but it vanished from BOTH my phone and the cloud. That's why I'm so angry about it.

Maybe you are looking for

  • Retrieve BP's country

    hi experts.. i have the following query SELECT T0.[DocNum]'u03A4u03B9u03BCu03BFu03BBόu03B3u03B9u03BF u03A0ώu03BBu03B7u03C3u03B7u03C2', p.Docnum'u03A4u03B9u03BCu03BFu03BBόu03B3u03B9u03BF u03A0u03C1u03BFu03BCu03B7u03B8u03B5u03B9ώu03BD', p.docdate, pp.C

  • Please!!!!!!   How can i add rows in html table dynamically [use jsp,bean]

    hello, i am a fresher in jsp. i want to add new rows in html table dynamically.In my coding, just only shows in one row . please help my problem with correct coding and i don't want to use database. Thanks ...............! Here is my coding----------

  • HP Pavilion dv6000 - Blank screen

    My HP Pavilion notebook PC, which is now almost 2 years old, is showing a blank screen. its not displaying anytihng at all. Not even on an external monitor. I was working on the pc when at once there came colored randonly moving lines and after somet

  • Error during running a transpose package

    Hi Experts, We are facing an error while trying to run a transpose package. The package does not show the lines for selection of source and destination path and it gives an error when we try to click on the advance tab to see the parameters being pas

  • IPv6 Firewall ICMPv6 quirk

    Model : RV110W      Firmware : 1.2.0.9 Hi, I'm studying the RV110W IPv6 Firewall in the context of a long IPv6 study / Blog post ( 30+ posts yet ). I've found a strange quirk in the RV110W IPv6 Firewall that I can't understand. I've remade all the te