I'm a designer not a coder. Is Dw best for me?

I want to build some beautiful reactive websites but I'm best at design and not so much code. I can do HTML and CSS but php and java just won't stick with me. I was thinking about buying a few really good reactive blogs that allow me to re-design the template. Would Dreamweaver be the best program out of all of adobe for doing this job? Maybe I should use indesign or another adobe product? Please advise. Thanks in advance.

WordPress Themes drive the site's appearance as well as functionality.  Not every Theme is going to be right for every person or situation.  You wouldn't want to use a Real Estate Theme for a Food blog or a Photography site.
Right now, there are about  a zillion WP Themes out there -- both free and commercial.  Most of the current ones are based on the Bootstrap responsive framework.  I think you should learn to work with Bootstrap first. 
Bootstrap · The world's most popular mobile-first and responsive front-end framework.
Then learn how WP Themes work and what the coding requirements are -- with CSS and PHP files.
Customizing a WordPress Theme The Right Way | Tutorials | Colorlabs & Company
http://www.presscoders.com/wordpress-theme-customization-guide/#chaptertwo
Nancy O.

Similar Messages

  • Why is my license code CS6 Design not longer valid?

    Purchase date 17-12-2013
    Why is my license code CS6 Design not longer valid?

    Do you have an Education version which you purchased through a University, not a separate purchase of your own?
    Education CS6 serial number expire after 2 years https://forums.adobe.com/thread/1564342
    -and https://forums.adobe.com/thread/1570498
    Anyway, Since this is an open forum, not Adobe support... you need to contact Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Editable region but not in code view

    EDIT: While cooking dinner I thought that the computer "fixes" itself when it reboots what about Dreamweaver?  I closed DW down.  Reopened the app and voila.  I CAN edit that section in code view now.  It's weird but it appears to be working.  I'll repost if something is amiss again regarding this issue.  I'll leave the post up in case it's helpful to anyone else.  thanks.
    I have new pages made from a template.  I can only edit in design view NOT in code view.  I get the standard error of I'm trying to edit where I'm not allowed.  I've made templates many times but never had this problem (I don't think!).  Does someone have a tip or help for me?  In addition to this issue I was not able to change the title of the page until I added the editable region in the template for title line.  That's always been default editable before.  Thanks a lot. I'm using DW8.
    begining code from template:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <!-- TemplateBeginEditable name="title" --><title>Party Invitation Boutique</title>  <!-- TemplateEndEditable -->
    begining code from new pages:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/index.dwt" codeOutsideHTMLIsLocked="false" -->
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <!-- InstanceBeginEditable name="title" --><title>Baby Blue</title>  <!-- InstanceEndEditable -->
    -------------then further down on the page is the editable region-------------
    <!-- InstanceBeginEditable name="main_content" -->
    <div id="content_right">test only can type in design view. can't add div boxes
      even in this editable region. ugh. can't even type next this this text in the
      code view. </div>
    <!-- InstanceEndEditable -->

    Best thing you can do in the future is run your code through the validator if the editable region exists:
    http://validator.w3.org/
    If there are code errors with other tags on the page then it is possible DW is overlooking its own template code.  Unfortunately without seeing the whole page I cannot say this is definitely the case, but a likely possibility.

  • In other words jQuery mobile does not generate code with result can not test Apps in dw cs6

    from the time compiled in phonegap dw c6 tools and tested from dw the App in Android sdk, for a jQuery mobile App the, code in split/Live is the same as split/Live/Live Code.... in other words jQuery mobile does not generate code with result can not test Apps in dw cs6, but design shown without jQ mobile generated code, well?

    well, jQuery mobile stopped to generate code with result can not test Apps in dw cs6, but design shown without jQ mobile generated code, well (neither generated code seems nor design as seem in mobile)....????

  • Design Notes - Can DW show all referenced files with notes?

    Hello Everyone,
    Is there a way to have DW display all files with Design Notes
    on them? I like to make notes on any php files that I have edited
    to keep track of code changes (especially when updating modules),
    but I cant seem to find a way to have all edits show for a working
    site. Is this possible? If so, how? If not, does anybody know of I
    workaround? (apart from using a repository of course).
    Many thanks if somebody has any ideas on this.
    Steve

    Well it's not the perfect solution for me, but here's the
    closest thing from the docs.
    Notes:
    To show the yellow Design Notes icons, select Site > Manage
    Sites > [your site name] > Edit > File View Columns on the
    Advanced tab. Select Notes in the list panel and choose the Show
    option. When you click the Expand button on the Files toolbar to
    show both the local and remote site, you have a Notes column in
    your local site that shows a yellow note icon for any file with a
    Design Note.
    Man, I kept missing this in the docs, finally...... Hope this
    may help someone else in future!
    Steve

  • Infopackage Idocs in status 2 - could not find code page for receiver system

    Hi,
    We just migrated our production system from BW 7.01 non unicode to BW 7.4 on HANA.
    We now encounter issues with idocs while loading data into bw from our ECC5 source. When we analyze idocs in the source system it appears with the message "could not find code page for receiver system"
    One weird thing is that the idoc seems to have been created before we started the infopackage in bw.. We controlled system time and AS time and everything seems ok.
    We did not encounter this issues on our previous migration test runs..
    Hope someone can help
    Christophe

    Hi,
    Thanks for responding. We finally found out what the problem was.
    We have two applications servers on our ECC with 2 different OS. One of them could not reach the new BW HANA server.
    Regards
    Christophe

  • [BO XI 3.1] BO Designer not starting after installing SP5

    Hello All!
    I installed SP5 on top of BO XI 3.1 SP3 (Windows Server 2008 R2 64bit) on server. There is an issue that Designer is not starting. The process designer.exe shows up in "Task manager" for 1-2 second and disappear. No entries in Event Viewer and in BO logs. I also installed SP5 on client desktop machine and the same happens.
    Do you have any tips/advices? Thanks for that!
    Bartosz

    Hello,
    we are not aware of such type of problem and it is most likely something peculiar to the configuration or architecture of your deployment.
    I would analyze trace logs from Designer and from Process Monitor ( [http://technet.microsoft.com/en-us/sysinternals/bb896645] )   
    My advice is to open a support  message because is a complicated investigation that probably will need some remote support as well
    Thanks
    Best regards,
    Simone

  • IDoc Status 02 ( Could not find code page for receiving system )

    Hi All,
    I am getting Idoc status 02 when I am trying to send IDocs from ECC to PI system ( Production ).
    Error description.
    Could not find code page for receiving system
    Message no. E0266
    Diagnosis
    For the logical destination PIP001, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
    Procedure for System Administration
    Possible causes are:
    1. The entry no longer exists in the table of logical destinations.
    2. The target system could not be accessed at runtime.
    3. The logon language is not installed in the target system.
    4. In the destination system, no logon language is maintained
    Please help.
    Thanks - Vinay.

    Hi Vinay,
    Status 02 occurs when data is not passed to port suceessfully. Check the RFC desination  is working fine and your able to connect to target system and also check correct port is assigned.
    Regards,
    Vinod.

  • Idoc Error: Could not find code page for receiving system

    hi,
    I am facing the following error while processing Idocs.
    ERROR: Could not find code page for receiving system
    Diagnosis
    For the logical destination BWFIN, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
    Can somebody suggest a solution for this. I have verified that the RFC destinations have been created both on the sender and receiver, ports (WE21) have been defined, and partner profiles (WE20) also created. How would I troubleshoot this problem?

    Hi,
    I did analyse on this issue.It is all because of the Langauge settings in the SM59.This can be done by the BASIS person.The Language field would be empty, but when ever we send the IDoc from the unicode to a non unicode system we have to mention the Langauage used.
    If this helps you really award me the points.
    ~Katty

  • Idoc failed in Bi system "Could not find code page for receiving system".

    Dear Experts,
    i am getting below error ,Idoc failed in Bi system "Could not find code page for receiving system".
    All the idocs have been successfully posted except one which is giving this error
    Idoc status 02 - could not find code page for receiver system.
    Please guide me
    thanks
    vamsi

    Hello Vamsi,
    check Note 647495 - RFC for Unicode ./. non-Unicode Connections
    If your ERP system sends e. g. chinese data to the SCM system, how should the system know which codepage to use? You have to set the MDMP flag in your ERP system in SM59 and configure in the MDMP extended settings which codepage should be used for what language.
    Please check this thread - IDoc error - Could not find code page for receiving system
    Hope it helps,
    Thanks & Regards,
    Amit Barnawal

  • RFC_ERROR_SYSTEM_FAILURE: Could not ascertain code page

    Guys:
    Here is the solution i discovered and its going to error.
    PI is in windows environment.
    File to RFC ( in PI itself no remote SAP ECC sytem or any system)
    -Sender com channle I am using the file adapter with FCC
    -Receiver I am using a RFC fucntion mdoule (FM). Remember this RFC function module to convert the file (itab and masaget he data as required and use gui_downlaod and write to PI file system)is on PI ABAP
    stack and I imported the function module . I Remote-enabled button in SE37 FM in PI ABAP stack.
    I did the file to RFC mapping in PI java stack.
    -Receiver Comm channel I used RFC and pointed to PI system itself with the PI appserver/sysno/userid/passowrd.
    In SXMB_MONI i see a checkered flag as success and failing on the receiver adapter with the error
    "RFC_ERROR_SYSTEM_FAILURE: Could not ascertain code page". The xml files on inbound payload and technical routing looks good.
    Please help !

    Hi Kumar,
    Refer the last post in the forum post Re: RFC_ERROR_SYSTEM_FAILURE and see if there is any issue due to code page as mentioned.
    Regards,
    Srinivas
    Edited by: Srinivas on Apr 29, 2010 8:28 PM

  • I get an error message when using google search: Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffamazonhot/content/lib/Extension.debug.js Line: 366"]

    Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffamazonhot/content/lib/Extension.debug.js Line: 366"]

    Tools->Add-ons->Extensions
    At the top of the Firefox window, click on the Tools menu and select Add-ons. The Add-ons window will appear.
    In the Add-ons window, select the Extensions panel.
    Select the add-on you wish to uninstall.
    Click the Uninstall button. When prompted, click Uninstall to confirm.
    Then restart Firefox.
    Read here:
    [[Uninstalling add-ons|#How to uninstall extensions and themes|Uninstalling extensions]]

  • I get a message Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffebayhot/content/lib/Extension.debug.js Line: 366"] using Vista. I don't understand how to delete the "ebay

    Every time I try to use google for a search, I get the following error msg. Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffebayhot/content/lib/Extension.debug.js Line: 366"]. I saw the solution provided for MS XP, but not for Vista. Also, while I saw the solution, I need more explicit instructions on how to "delete the ebay extension".
    == This happened ==
    Every time Firefox opened
    == When I try to load google from Firefox, I get the error message, Debug Error:[Exception... "Node was not found" code: "8" nsresult: "0x80530008 (NS_ERROR_DOM_NOT_FOUND_ERR)" location: "chrome://ffebayhot/content/lib/Extension.debug.js Line: 366"]

    Tools->Add-ons->Extensions
    At the top of the Firefox window, click on the Tools menu and select Add-ons. The Add-ons window will appear.
    In the Add-ons window, select the Extensions panel.
    Select the add-on you wish to uninstall.
    Click the Uninstall button. When prompted, click Uninstall to confirm.
    Then restart Firefox.
    Read here:
    [[Uninstalling add-ons|#How to uninstall extensions and themes|Uninstalling extensions]]

  • Need to create 500 designs, all identical in every way except for a unique QR code

    Hi there. I am using Photoshop CS6.
    I have a design from which I want to create 500 versions of an image. All will be identical, except for the QR code which will be unique for every one.
    The placement of the QR code will be identical in all of them. It's just the actual QR code that changes.
    Any idea how I can achieve this in an automated way? I have the QR codes in a folder, already created, and I have the design already created. I just need to marry up the 2 now and end up with 500 design files to give to the printers for printing.
    Thanks for any direction on how to do this!

    I think you can do it with variables.   I haven't ever tried it, but someone posted up a link to it a few weeks back when a similar question came up.  I bookmarked it because it looked interesting:
    PS CS5 - Working with Variables | The Complete Picture with Julieanne Kost | Adobe TV
    And here's a walkthrough:
    Using Variables in Photoshop with External Data Source

  • LabVIEW could not generate code for the shared variable.You must open the VI in the project that contains the library where the shared variable resides

    HI
    When I put a network shared variable with fifo RT activated on my diagram, the arrow is broken.and I' ve got this message:
    ""LabVIEW could not generate code for the shared variable.You must open the VI in the project that contains the library where the shared variable resides""
    If I uncheck FIFO RT option for this variable the arrow isn't broken anymore.
    I 've no idea how to correct this weird error?
    Autodeploy is on, and I've check copy / delete in diagram in tool/options\diagram
    regards,
    james

    Hello,
    I don't reproduce this error.
    Could you send your VI?
    Regards
    VéroniqueD
    NI France

Maybe you are looking for