I'm exporting files from a wedding and some of them are below the requested 12mb jpeg. I've shot in raw and have done a little cropping in places. how can I maintain at least 12mb. HELP thanks
please help.
I'm using mac
5D mark III
Do you know why the images are less than 12MB? Have you used too much NR or cropped them too small or are you resizing them smaller than their native size? Or did your camera have reasonably low megapixels to begin with?
Not resizing smaller and setting the quality to 100 will minimize the compression of the images and maximize their size at their native pixel resolution.
Dialing back on the noise-reduction and/or increasing the sharpness will also increase their size but that may be detrimental to the look of the photo.
If they still aren’t 12MB at their native size and quality of 100, then you can increase the filesize by upsizing them to larger than native pixel dimensions, which seems silly, but if the contract has that stipulation then that’s the only thing you can do.
Having used a larger sensor camera, like a Nikon D800 or D810 is another way to have had larger JPGs to begin with.
Similar Messages
-
I have a ipod touch 1G and I would like to upgrade firmware from 1.1.5 to the latest 3.x. How can I do it? Please help. thanks
vinayakfrommonroe wrote:
I have a ipod touch 1G and I would like to upgrade firmware from 1.1.5 to the latest 3.x. How can I do it? Please help. thanks
Hi: Check out the Apple article below.
https://discussions.apple.com/message/15112985#15112985
Stedman -
I have forgotten my "restrictions code" passcode. How can I get a new passcode? Thanks for your help. Paul
If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
A Complete Guide to Recover Your iDevice if You Forget Your Passcode
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
1. Verify that you are using the latest version of iTunes before attempting to update.
2. Connect your device to your computer.
3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
4. Select the Summary tab.
5. Select the Restore option.
6. When prompted to back up your settings before restoring, select the Back Up
option (see in the image below). If you have just backed up the device, it is not
necessary to create another.
7. Select the Restore option when iTunes prompts you (as long as you've backed up,
you should not have to worry about restoring your iOS device).
8. When the restore process has completed, the device restarts and displays the Apple
logo while starting up:
After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
iOS, keep your device connected until the "Connect to iTunes" screen goes away or
you see "iPhone is activated."
9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake
and Home buttons at the same time. When the device turns off, release the Sleep/Wake
and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device.
The device should turn on. Note: If you see the screen pictured below, let the device
charge for at least ten minutes to ensure that the battery has some charge, and then
start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button.
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked. -
hi in my browser some urls are running and some of them are not running EX: google and facebook kindly help
Hi
It may be virus, please reset all IE settings and try antivirus and scan your PC. Before that esure that other PC connected to the same internet is able to access the Site which will let you know if this is issues with ISP or not -
I have about 10000 images of different persons with dimension of 640*480. I wan to crop face from these images to dimension of 200*280. The location of face varies in differnt pics. So, please let me know step by step how can I perform this using the Lightroom software. Also I wan to know what should be the aspect ratio to do so.Thank you in advance
The aspect ratio should be set to 200x280, or equivalently 5x7.
I don't think it is possible to do the cropping automatically in Lightroom, you'd have to do this image by image to crop the faces correctly. -
my keyboard on macbook pro (laptop) is acting weird. One key is not responding at all. Have verified using Keyboard viewer and some other keys are printing the unresponsive character at random. "z" is the unresponsive character.
Is it a damaged keyboard ?
The laptop is just 2 months old, will Apple replace it with a new one if its indeed a damaged keyboard or just repair, I use it for official purposes so being without a laptop is not much of an option.No one here works for Apple, so we don't know what Apple might or might not do. If it's a genuine defect, they will of course repair it under warranty. It is not their responsibility if it effects your ability to work or not, so that's on you.
If, however, they determine that the key is problematic as a result of your misuse of the laptop, then everything is on you. And trust me, if they find a glob of dried up beer or coffee there, they will charge you.
Your only choice is to take it in for repair. -
Hi ,
I am from Spain and I am new in MacWorld, recently I have bought a MacBook Pro , but teh keyboard is not configured rightly, when I want to write @ I have to press g instead of the @ key, or the symbol for questions ?, I have to press :: key. Please how can I solve this problem ?. Thanks in advance.
BR,
XAvierxavier85 wrote:
I am new in MacWorld
Sorry to disappoint you, but this isn't MacWorld.
when I want to write @ I have to press g instead of the @ key
Are you sure you don't have to press ⌥-G (Option-G) to get @?
Anyway, sounds like a keyboard/keyboard layout mismatch.
Go to System Preferences > Language & Text > Input Sources. From "Select input methods to use" enable (check) the following
Keyboard & Character Viewer
U.S.
Spanish
Spanish - ISO
Also enable "Show Input menu in menu bar".
The Input menu should appear to the right of your menu bar, with the icon of a national flag. From this menu, choose "Show Keyboard Viewer". Then compare the layout displayed by Keyboard Viewer with the label on your MBP's keyboard. If it doesn't match, choose a different layout from the Input menu.
My suspicion is that you're using a US keyboard with a Spanish keyboard layout, hence the difference you noted. -
Ive purchased ringtones from Itunes. They were working before I did the recent update. I cannot find them on the iPhone and they are no longer assigned - I had five. I have synced several times and does anyone know where they are or how to assign them again?
On your iPhone tap Settings > Store
Make sure Music is switched on.
Now reset your iPhone.
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears. -
When synching Contacts from GMail, some of them are missing the telephone number
I synced my contacts from my GMail account to my iPhone through Microsoft Exchange. All the contacts succesfully appeared in the iPhone, BUT most of them are missing their phone number. I already waited for the sync to end, they just won't appear.
I have same problem. I could only see a fraction of my project photos if I browse the Aperture lbrary. It is the same problem when I sync the aperture photos to my iPhone or iPad. I still cannot solve it but I know a way to go around it for your iMovie to see the pictures so that you can work on your iMovie.
Here is the work around:
Export the photos from your album to your hard disk and re-import into your iPhoto. Now you should be able to see those photos that you want to work on in iMovie when you browse your iPhot library. -
When downloading a large file, like a movie, Internet Explorer automatically opens a download window offering the choice to "Open" or "Save"the file. This provides one with the choice of where to save it - e.g. "C" drive, in the "My Documents" or "Desktop" folders but Firefox's download window doesn't. This has always frustrated me because I would rather use Firefox exclusively to access the Internet, but when it comes to saving files downloaded off the Internet, sadly, I have to revert to IE!
If you click on Firefox from the upper-left, then Options, a new window should appear. On that window, click on the general tab. In the middle of the window, you'll see options regarding your downloads, one of which says, "Always ask me where to save files." Click on the bubble for this options, then click Ok. From then on, you should always be prompted on where you want your files saved.
-
i have an ipod touch!
Settings>Music>Sound Check will HELP to normalise the volume of your music but it only averages it out.
-
How I can export files from CS5.5 to send for further editing in CS6 and no lose quality?
how I can export files from CS5.5 to send for further editing in CS6 and no lose quality?
If all you need for further editing is the contents of your Timeline,
then you should follow Harm's sage advice.
Lagarith Lossless Video Codec
http://lags.leetcode.net/codec.html
Ut Video Codec Suite
http://www.videohelp.com/tools/Ut-Video-Codec-Suite
But, if you will need all of your source media files to continue the edit,
you should consider using the Project Manager.
Trim or copy your project
By using the Project Manager, you will be continuing the edit
with the original media files and there will be no quality loss.
Be aware that once you have edited the project in CS6,
it will be problematic (but not impossible) to return to edit in CS5.5. -
Exporting files from InDesign to correct size
Hi,
Hope someone can help. I create multiple ads for many publications and have joboptions set up for each. Brill, saves loads of time!
However, some require the ad to be cropped to bleed size but still include crop marks. How can I export a PDF to the correct size (trimmed to the bleed size with crop marks but without the white space you always get?!). For instance, can you specify the length of the crop marks to make them shorter or just specify the correct trimmed size without the white space?
At the moment I have to specify a bleed of 10mm when exporting from InDesign and then crop 7mm off all round to leave 3mm of bleed in Acrobat with the crop marks (albeit small) remaining on the document.
The ads are delivered via adsend so if they don't pass the specs, they are automatically rejected (gone are the days when someone REAL checked them over – sigh!)
Please, please, has anyone got a solution?!!
I'm using CS5 and Acrobat 9 Pro.
Oh, and I can't seem to print a postscript file or PDF anymore since we got a new crappy printer!You cannot export from Pages to ID, though you could export to RTF and use File > Place... to import the thext, but you'd need to rebuild the layout.
Placed PDF is essentially a graphic, so your pixelation may just be the default preview quality. Try View > Display Performance > High Quality Display (and you can set this as the default in the prefs). Keep in mind, though, that the imported PDF is not editable in ID. -
Import export file from hands-on training session
I have download the required files from the Forms hands-on training session and want to install the database. After a succesfull ftp upload of the export file (binary method) to a HP-UX system, I import the file as indicated in section 7 of the installation instructions.
I then receive several kind of the following messages:
Import: Release 8.0.5.0.0 - Production on Mon Aug 14 19:38:29 2000
(c) Copyright 1998 Oracle Corporation. All rights reserved.
Connected to: Oracle8 Enterprise Edition Release 8.0.5.0.0 - Production
PL/SQL Release 8.0.5.0.0 - Production
Export file created by EXPORT:V08.01.05 via conventional path
IMP-00008: unrecognized statement in the export file:
AD 6U
IMP-00008: unrecognized statement in the export file:
%G6BYI2m"<9lza`k)@Q'UQIf5{$>8@?`c=@
IMP-00008: unrecognized statement in the export file:
9
IMP-00008: unrecognized statement in the export file:
Kz`
IMP-00008: unrecognized statement in the export file:
Is it because of the import against a 8.0.5 database or is perhaps the export file corrupt?
I hope you can help me.
Best regards,
Erika van der Aar
E-mail: [email protected]Hi,
Please go through the below blog:
How to Export/Import and activate .sca files in SAP Composition Environment - CE local development
Hope this helps!!!
BR,
Anurag
Maybe you are looking for
-
I have been using FCPX for mnths with no isues, in the last day or so when I haev tried to share to DVD with a project, between 50% and 65% it fails and provides the error 0 code. Any thoughts? Recent update issue? Reinstall maybe help? I have not ch
-
Is there a standard report or method of viewing changes made to the organization structure in HR? thanks in advance.
-
Exporting files from my camcorder
I have a JVC GZ-HD7 and I can't get my files into quicktime to save my life!these are the steps I need http://software.transdigital.co.jp/products/cbsev/tutorialeng/index.html and I bought the Pro version but I have no idea how to get quicktime to ch
-
Hi, I have a form with these items Issue_id 16927 Issue_summary Test issue_description It is a Test issue status OPEN Priority Low On this form, there is a button named create_Like which redirects to same page. What I want is when I click on that but
-
Postage report with automation and nonautomation
Has anyone ever seen postal report generate two postal reports for one mailing? Where non-automated pieces weren't included.