I'm getting a random beep sound when I hit the input button to record a turntable
I'm getting a random beep sound when I hit the input button to record a turntable & mixer plugged into the mbox thats bleeding into the recording. How can I stop this? Please help me. It's happening if I'm recording or not, as soon as I hit the (I) input it beeps randomly.
Thanks Jim,
Seems to be this song. Other projects don't have this issue.
I even took and opened the project on another computer, bounced it again and got the same "click" at the same 13 second area.
I've bounced each track solo, listened and NO click at the 13 sec. mark
No third party plug-ins.
The click doesn't land close to any beginning or end of a region.
Final mix down looks good, no peaking over 0db.
This is making me nuts!
Similar Messages
-
Why does MainStage silence all instrument sounds when I hit the play button?
I want to be able to be playing a pad or keyboard sound through an instrument channel strip that doesn't get cut off when I hit the play button to playback loops and sounds I have for songs.
Hi
The "Play" button resets the audio engine. Better to leave that running and use some other control mapped directly to the Playback Plugins
CCT -
Apple logo randomly comes up when I hit the select button
When I am selecting songs on my Ipod, sometimes the apple logo will come up and stay on for about 5 seconds when I push the select key. My ipod is a Nano, 1GB. Does anyone have any ideas?
Idea: Post this on the iPod Nano discussion boards.
-
My Macbook pro randomly shut off. When i hit the power button, i can hear it start up, but after a click sound, it stops booting up. help?
Hi..
Try Resetting the System Management Controller (SMC)
If that doesn't help, try Troubleshooting MagSafe adapters
When you post, please tell us which Mac OS X you have installed. Thanks -
I have a powermac dual g5 2.0 that wont start up.When I plug it in I get the click from the power supply. When I hit the start button, the white led on the front panel lights up and stays lit. No whir sound from the hard drive or the fan. No lights on the motherboard
The click usually indicates a big problem, but...
How to reset the SMU/PMU on a Power Mac G5 (Late 2004) or Power Mac G5 (Late 2005) ...
http://support.apple.com/kb/HT1436
Earlier G3, G4, G5 models...
http://support.apple.com/kb/HT1939
Might be time to replace the PRAM Battery, 4 years is close to their lifespan, far less if ever without AC power, & can cause strange startup problems...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/ -
When I hit the import button for a new project I get an internal error message stating: Could not find namespace: AgCreativeCloudUtils
Can someone help me with this issue please? Tkshttps://forums.adobe.com/search.jspa?q=Could+not+find+namespace%3A+AgCreativeCloudUtils&pl ace=%2Fplaces%2F1383621&depth=…
-
My iPad 2 will not allow me to update my apps. When I hit the update button I get a spinning circle but then it times out and doesn't update. In the past when I have updated successfully, the spinning circle would show me an indicator of time left on the update. I no longer have this Indicator. The circle just spins and times out and nothing happens. I've reset the iPad in the settings menu, reset the router, logged in and out of Apple id, powered ithe iPad off and on, and tried a couple other "fixes" that I've read online. So far no luck. AAny help would be greatly appreciated. Much thanks!
How much free space do you have? If it is low, installers may not be able to run properly.
-
When I try to play some of the songs in my itunes library, I get a prompt saying the file cannot be used. When I hit the locate button, the file cannot be found. I didn't delete any songs/files and there is no common link between the missing songs.
Hello there, Paso Kid.
The following Knowledge Base articles provide some assistance with locating content in your iTunes Library:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
and
Where are my iTunes files located?
http://support.apple.com/kb/HT1391
If you have already reviewed those steps and still cannot find the songs you purchased from iTunes, delete the songs and download them again using the information in this article:
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
In Pages, when I hit the return button, the first letter on the new line is not capitalises. How do I get it to capitalise automatically?
Right click the Back button and choose the page you want to go to from the list.
'''N.B.''' I noticed that your Flash installation is out of date which exposes your system to attack. See: http://www.adobe.com/support/security/bulletins/apsb11-18.html<br><br>
Update via http://get.adobe.com/flashplayer/ -
My mac went all fuzzy and now wont start up. When I hit the on button it simply makes a beeping noise and nothing else happens!
Here's the Apple support article on beeps https://support.apple.com/kb/HT1547
-
my 5 yr. old turned off the volume on my ipad. when I hit the volume buttons it just says "sound effects" and does not go up or down
I had the same problem- go to Utilities, General, Use Side Switch To, and change it from Mute to Lock Rotation- this solved the problem for me.
Good luck! -
Hello,
I have a Mac that's fast as lightning running on the latest version of OS X. I use eBay A LOT. In the newest version of Firefox that I just downloaded when I hit the back button it takes me to the original "new tab" page. Please don't make me use Chrome or Safari, I love you guysThank you for your kind words on the Tablet, as this is the only product mentioned that is supported on this forum, The forums here are for Home Electronics and Computers, and do not reach the Sony smart phone community.
The Sony smart phone Support Forum is the place for Sony (formerly Sony Ericsson) users from around the world to get help and help others:
your very in depth suggestions and comments would best be heard at the following forum that is dedicated exclusively to the Sony smart phone community.
http://talk.sonyericsson.com/community/support -
Error When I hit the View Button
Hi All,
Let me confess before hand I am new to the BI publisher.
I have it set I guess, I can log in could connect to the local database and generated the report but when I hit the view button, it says an error occurred contact the Administrator. I am logging in as Administrator.
Are there any configuration settings that I need to make?
I did change the model to be XDO and then I have installed BI-Publisher Desktop. I can see on my word Tool bar. Is there anything else i need to configure.
When I hit error details i get
Unexpected element: :report
Are there any log files which I can dig in and see what is wrong.
Thanks in advance I appreciate
MCPHi,
depending the combination of your Firefox-Version (3) and your BIP-Version (10.1.3.3.3) that happens every time. Is fixed (see Note 605403.1)
Regards
Rainer -
I don't think my Mac Pro is completely shutting down. When I hit the power button, it just turns off immediately instead of going through the normal shut down procedures. I heard that I should try resetting the SMC, which involves removing the power cord. However, when I remove and replace the power cord, it turns on automatically, so I can't even properly reset that to see if it is the issue. Is this probably a power supply issue?
Actually, in case this information helps... The computer went into sleep mode the other day, and would not come back. This is a work computer that I use for our photography business, and at this point I am just trying to run it as a drive to get the photos onto our new computer, but this issue is keeping us from doing so. Any help would be greatly appreciated!Try a SMC reset.
DALE -
Question
When I hit the Connect button on my droid phone a message comes up that says" Cannot Setup Sync " instead of giving me the 3 lines of codes I need to enter into my Desktop Computer.. Thanks, JoeThe Cannot Setup Sync message indicates that you don't have internet access. Check that you can get your phone online (3g or wifi) and then try to connect again.
Maybe you are looking for
-
Including page in a region : best practice
Hello all, I know that this subject has been already discussed many times but my question is not really "how to do it"...but "is it the best way"? So the initial need was the following : I had to be able to include the content from a page in an appli
-
Unable to open 10g Database Control Webpage from another computer
Unable to open 10g Database Control Webpage from another computer Hi Gurus I have just installed Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 on my PC Windows XP , created database and configured DB control I can open Database Control We
-
I just updated my iPhone with the newest update IOS 6.1. My old Apple ID keeps popping up on my iPhone for me to type in the password that I no longer know. All the passwords I type in do not work. I no longer have access to this email which is my ol
-
HP-8600 plus Firmware Downgrade
I just got an 8600 aka CM750A that is rejecting the ink cartridges I bought after the install cartridges got used up. It tells me to get the OEM ones over and over but I got a whole case of these LMI ones, which were much cheaper than OEM. Looks like
-
Static Header followed by dynamic header in a single table
static1 static2 static3 =[dynamic] Hi Experise, I need a static header followed by the dynamic one as shown above, tried a lot but not able to make it.Can you guys help me please ? thanks, Santhosh