I'm getting blinking white light and the TV shows a graphic that is the ATV box and HDMI cable. I changed the HDMI cable with the same result.. What gives?

Blinking white light HDMI graphic on TV... That's it, nothing else. What can I do?

The ATV is telling you it needs to be plugged into your computer and restored through iTunes.
Here is the Apple support page.
Hope this helps.
PJRS

Similar Messages

  • Using Firefox 27 on the Mac. Video on most sites will not now work. I know I am not alone with this problem. What gives?

    Using Firefox 27 on the Mac. Video on most sites will not now work. I know I am not alone with this problem. What gives?

    Hi KevinMcL,
    Thank you for contacting support. I am also using your set up and I experience video issues when I have hardware acceleration turned on.
    Other steps you can take to improve your experience:
    * [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
    Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
    You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
    Then perform these steps:
    *Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
    *In the Firefox options window click the ''Advanced'' tab, then select "General".
    *In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
    *Now, restart Firefox and see if the problems persist.
    Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
    * [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    Did this fix your problems? Please report back to us!
    Thank you.

  • Stuck on blinking white light no access

    Hola
    En el 2013 compre un disco WDMC de 3 TB y primero funcionó bien pero despues empezo a tener el problema de quedarse pasmado y prender el led en blanco "blinking white light", contacte a soporte técnico y esto fue lo que me dijeron:
    Dear Gregorio Castaneda,
    Thank you for contacting Western Digital Customer Service and Support.
    Try to do a reset in the disk, pressing the RESET button in the back of the network disk for 4 seconds, after the reset the data do not get lost only the user name and password changes back to user name "admin"; without password or with the password: "password", the name of the drive changes back to WD My Cloud and the IP configuration changes back to automatic DHCP.
    If you have any other questions or concerns please respond to this email and we will be happy to assist you.
    Sincerely,
    [Deleted]
    Western Digital Service and Support Europe
    Claro que eso no funciono por que el problema esta en el firmware.
    He logrado que funcione mi disco (a medias) deshabilitando las siguientes funciones:
    1. Deshabilitar "Acceso Remoto"
    2. Deshabilitar "Unidad en reposo"
    3. Deshabilitar "Servicio DLNA"
    Con esto he logrado que funcione por más de un mes, sin embargo solo tengo un simple disco de reespaldo, no tengo las funciones que un WDMC ofrece.
    Nota: Ire activando cada opción posteriormente para determinar cual es la reesponsable del problema.
    Saludos

    Hola  La versión de firmware es v04.01.04-422 También cada que sale una actualización la instalo esperando que eso corrija el problema. Actualización: al parecer la función que causa el problema es la de ahorro de energía, ayer la active y hoy mi disco amaceció con el led parpadeando en blanco . Hoy voy a activar el servicio DLNA. Saludos.

  • Apple TV is blinking and requesting to connect cable with itunes, why? I do not have the USB cable since it doesn't come with the Apple TV .

    Apple TV is blinking and requesting to connect cable with itunes, why? I do not have the USB cable since it doesn't come with the Apple TV .

    Hello folks
    I had the same problem today: Apple TV is blinking light and requesting to connect cable with Itunes (Itunes Logo appears)
    I solved the problem according Alley_Cat mentioned and described in link bellow:
    In my case, I restored factoring setting using a Micro USB Cable connected in Itunes
    Follow the steps carefully described in link bellow
    Good luck.
    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

  • I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

    I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
    Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

    1
    Close all iWork applications
    2
    Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
    3
    empty the trash
    4
    shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
    let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
    5
    Reinstall Keynote by logging into the Mac App Store using download / install

  • HT201302 I am trying to upload pictures from my phone to my computer and I'm getting an error message that a photo is corrupted so it can't download.  I don't know how to tell which of the photos is corrupted so that I can delete it and try again?  Thanks

    I am trying to upload pictures from my phone to my computer and I'm getting an error message that a photo is corrupted so it can't download.  I don't know how to tell which of the photos is corrupted so that I can delete it and try again?  Thanks!

    If this is an iCloud account the Outbox only appears when sending an email, so if it is still trying I suppose it should be showing now (not sure though, hard to replicate this)
    What type of email account?

  • Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac.

    Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac. I was thinking of getting a Seagate becuase apparently it is compatible with both systems, but I want to know which would be a better investment.

    Using USB 3 devices on Mac computers FAQ

  • I just bought 4 songs on iTune.Album:Voices light to the wind.I had the cd at home, but I lost it and decided to download the songs which I liked so much,I'd like to ask you to transfer me these songs with the original time!

    I just bought 4 songs on iTune.Album:Voices light  as  the wind.I had the cd at home, but I lost it and decided to download the songs which I liked so much,I'd like to ask you to transfer me these songs with the original time , the songs are :
    Venus (5:55 seconds) , Andromeda ( 8:04 seconds) , Hestia ( 9:47 seconds) and Aphrodite ( 6:39 seconds) !
    I thank you in advance for your attention!
    Flávia.

    http://www.apple.com/support/itunes/contact/

  • Initially stating No authorization required using Adobe.  When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer.  What gives?

    When I set up Adobe reader on my computer to be able to download books from a library and then transfer to my Nook e-reader, I initially stating No authorization required using Adobe.  When I try to change it so I can transfer downloaded books by my Nook e-reader it I get an error message stating the Adobe user name and password is associated with another computer.  What gives?

    This is pretty surprising and wierd that even Reader 10.1.1 is crashing on your system. It works pefectly for me.
    Would it be possible for you to get the crash dump, and upload it, so that I can have a look at the same.
    Download PROCDUMP from <http://technet.microsoft.com/en-us/sysinternals/dd996900.aspx> and extract it to a folder, say, c:\temp\procdump.exe
    Open cmd prompt and type "cd c:\temp".
    Launch the browser and open the PDF.
    Open task manager, sort processed by name. Two AcroRd32.exe instances  should have been launched. Note the PID (a small integer like 5588) corresponding to the AcroRd32.exe with the higher memory usage; this is the process that must be crashing. Note this PID.
    On the cmd window, type "procdump -e -ma 5588 c:\temp\01.dmp" (replace 5588 with the actual PID of the process noted in Step 4). Procdump will now wait for the aoolication to crash. If it throws a EULA, accept it.
    Perform your steps to cause the crash.
    Procdump will have created a dump file at "c:\temp\01.dmp". Zip it up (since it will be 100s of MBs otherwise) and share with me.
    Thanks in advance for all your help
    Ankit

  • My iPhone is having problems and I have to send it into Apple to get a fixed but in the mean while I need a phone. Could my old env touch act as a temporary replacement with the data plan? And if so how to I activate it with going to Verizon and once I ge

    My iPhone is having problems and I have to send it into Apple to get a fixed but in the mean while I need a phone. Could my old env touch act as a temporary replacement with the data plan? And if so how to I activate it with going to Verizon and once I get my IPhone back will I be able to activate it without going to the Verizon store?!? Thanks:)

    Im sorry. Im on my ipad and i didnt read that.
    Sorry again

  • I have a macbook 2011 and its booting to the apple with a loading bar. it gets halfway and changes to a screen with the apple and a spinning circle. It spins untill it dies. will not boot to safe mode. Do not have orriginal osx disk either.... HELP :(

    i have a macbook 2011 and its booting to the apple with a loading bar. it gets halfway and changes to a screen with the apple and a spinning circle. It spins untill it dies. will not boot to safe mode. Do not have orriginal osx disk either.... HELP

    It happened after an update

  • HT3986 I've had MS Office:mac 2011 on my imac for around 18 months now.  Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it.  I've just done this using the installation dis

    I've had MS Office:mac 2011 on my imac for around 18 months now.  Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it.  I've just done this using the installation disc which, then said the installation had been successful.
    Outlook is still not working.  Can anyone please advise me on what to do next.

    Remove MS Office 2011 completely (here are instructions) and reinstall it.
    It's not a simple or fast process but it is important to follow all of the steps in order to get all the files that Office scatters around. This will not affect your data files, only MS Office and its preferences.

  • I cant get on my phone it saids i have to registered as a iphone developer program and i dont want to do that but i cant cancel and i cant get back on my phone can someone help me

    i cant get on my phone it saids i have to registered as a iphone developer program and i dont want to do that but i cant cancel and i cant get back on my phone can someone help me

    Were you running iOS 7 beta?  If so, as a developer you need to log into the Developer forum for assistance.
    Not a developer and running iOS 7 beta?  Then you've stolen Apple's software and will receive absolutely no assistance from this forum.  Enjoy your iBrick!

  • HT201272 I bought 3 albums on my iPod, but then I got locked out of it, and on my new laptop when I click on 'purchased' it's not there, I'm also signed in with the account I bought it on, any suggestions?

    I bought 3 albums on my iPod, but then I got locked out of it, and on my new laptop when I click on 'purchased' it's not there, I'm also signed in with the account I bought it on, any suggestions?

    Hello AstarteLydianna,
    The following article provides some additional troubleshooting steps that can help get the App Store working on your iPod Touch.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    Allen

  • Can you view text outside of the canvas? as with the view menu you can see animation paths, bounding boxes and handles??? many thanks

    re: Motion 5
    can you view text outside of the canvas? as when using the view menu you can see animation paths, bounding boxes and handles???
    I'm in the middle of a text animation design treatment and unless my memory is completely failing I thought this was an option.
    An example would be selecting all layers and being able to see all bounding boxes and animation paths while moving along the timeline.
    Of course this could be quite a mess if you couldn't selectively chose which layers, its just with this current project it would be so helpful if
    I could see the text beyond the canvas to aid in my animations.
    many thanks,
    robert
    Motion 5
    2014 MacBook Pro 2.6Ghz i7
    16GB RAM
    OS X 10.9.5
    2011 Mac Pro
    4 Boot drives OS X 10.9.4, 10.10, 10.7, 10.8
    960GB OWC Mercury Accelsior_E2 PCI Express SSD (Current screaming fast boot drive)
    64GB RAM

    thanks for both of your responses
    I do understand shift + v " to "Show Full View Area" and shift + z to fill screen, etc.
    and command + & - for zooming
    what I'd like to do is selectively view, say, the text outside of the canvas as you can see the bounding box
    which contains the text or object when selecting one or all layers in the layers column
    I haven't used this feature in a while though I do recall using it in the past.
    Any help would greatly appreciated
    thanks,
    R.

Maybe you are looking for

  • HTTP receiver adaptor

    Hi all,    I am using HTTP receiver adaptor to connect to an external system.Here I have to pass an Idoc from SAP to one folder in the target host where the application is installed.      My question is without using FTP adaptor(only with HTTP) can i

  • Whiteboard, Polling and PowerPoint QoE / CDR Data

    I'm trying to use either the Lync CDR or QoE databases to establish usage around usage of whiteboard, polls and powerpoint features of Lync conferencing. Neither database appears to identify usage of these features. Is there any way to establish or i

  • Rollup and Compression in PC

    Guys, Let's say If I have an infocube which has aggregates created on it.  In a process chain how would the data flow look like? Is this one correct?? START > DROP INDEXES > LOAD > CREATE INDEX > Roll Up of Filled Aggregates/BIA Indexes Also what abo

  • Process Orchestration - NWBPM Question.

    Hi, I have strange requirement in PI 7.4 NWBPM and BRM. As am i have no experience on NW BPM and BRM, So just wanted to confirm if it is even possible to build. Design is some thing like this :- Actual Data will come from WebService and enter into NW

  • Where is the schema for this element: weblogic-wsee-standaloneclient

    i can't find the schema for this element anywhere: weblogic-wsee-standaloneclient. it is found int the <servicename>_internaldd.xml doc that is generated by the clientgentask ant task. can someone inform me of where it is? thanks, shane