I'm trying to get the image to print correct size. i've tried center image, fit to media image, and they all come out the same size...smaller than the size in "image size". is this an Epson problem or Photoshop problem. Thanks!

I just got a new printer...Epson R3000...but have had this problem before. It's probably a simple fix, but I can't figure it out. I'm asking for printing on 8.5 x 11 and the image comes out 6.5 x 9.5 every time. Help please! And thanks!

The Epson site stated that the R3000 printer can print borderless however the quality will suffer in the expanded print area. Borderless is not supported on some heavy paper. To me the means your better off limiting you images size to the standard print area. There will be magins about 1/8" on the four sides so the print area on 8.5"x11" paper is 8.26" x 10.76"....
Take note of the print size set by the epson driver it may change depending on the paper type set. Note my first epson 4800 setup where I set 8.5" x 11" sheet paper from tray into the printer setting the driver set a smaller size for the paper which was reflected into the Photoshop Print preview. It shows paper is 8.499" x 10.999 with a small unprintable area across the top....
Paper
Use paper under normal conditions:
Temperature: 59 to 77 °F (15 to 25 °C)
Humidity: 40 to 60% RH
Note:
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot guarantee the quality of any non-Epson brand or type of paper. Always test a sample of paper stock before purchasing large quantities or printing large jobs.
Single-sheets
Size
A4 (8.3 × 11.7 inches)
A6 (4.1 × 5.8 inches)
Letter (8.5 × 11 inches)
Legal (8.5 × 14 inches)
4 × 6 inches
5 × 7 inches
8 × 10 inches
11 × 14 inches
12 × 12 inches
Half Letter (5.5 × 8.5 inches)
B (11 × 17 inches)
A3 (11.7 × 16.5 inches)
Super B (13 × 19 inches)
Paper types
Plain paper
Special papers distributed by Epson
Thickness
0.003 to 0.004 inch (0.08 to 0.11 mm) in the sheet feeder
0.012 to 0.051 inch (0.3 to 1.3 mm) in the manual feed tray
Weight
17 lb (64 g/m2) to 24 lb (90 g/m2)
Printable Area
Note:
When printing borderless, quality may decline in the expanded printable area. Borderless printing is not supported with poster board.
Sheets
Top: 0.12 inch (3 mm) minimum
Left: 0.12 inch (3 mm) minimum
Right: 0.12 inch (3 mm) minimum
Bottom: 0.12 inch (3 mm) minimum
Roll Paper
Standard margins
Borderless printing margins
CD/DVDs
Caution:
Avoid printing in the clear plastic areas of your discs to prevent staining the disc with ink.

Similar Messages

My users folder has 140GB used on it, but I cannot find where it is getting that calculation. I went through all of my folders and opened them all in an info panel, and they all come out to about 30GBs. Where is the rest of the data? -Using Mountain Lion

My users folder has 140GB used on it, but I cannot find where it is getting that calculation. I went through all of my folders and opened them all in an info panel, and they all come out to about 30GBs. Where is the rest of the data? -Using Mountain Lion

First, empty the Trash if you haven't already done so.
Use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Proceed further only if the problem hasn't been solved.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click the line of text below to select it, then drag or copy — do not type — into the Terminal window:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Press return. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means.
When you're done with ODS, quit it and also quit Terminal.

Hi ....using iphoto '08, but whenever i export photos to mail, they all come out small size, regardless of which size i choose. please help.

hi ....using iphoto '08, but whenever i export photos to mail, they all come out small size, regardless of which size i choose. please help.

After they get into the email go to the small menu at the lower right hand corner of the Mail window and select the size you want:
Click to view full size

All my brushes are about 20% smaller than the diameter of the circle. What's happened?

All my brushes are about 20% smaller than the diameter of the circle. What's happened?

Visited Genius Bar. Solution was System Preferences/Accessibility/Display and move cursor size to Normal. A couple months back I evidently saw the option of making the arrow larger and did so and did not discover the problem in Elements until later. Before I visited Genius Bar I discovered same problem with Photoshop CS6 and Pixelmator. I had also uninstalled then reinstalled Elements and knew it wasn't a bug in the software.

My name is Frank and I have a problem with seeing videos. They all come up with "Blocked Plug-in" in the middle of the screens.

I'm having a problem bringing up videos, they all have,"Blocked Plug-in" in the middle of the screens.

There is no cache where the emails would be stored on the iPad, but you could try quitting the mail app and then launch it again and see if the emails return.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Tap the home button. Then try mail again.

Why do attachments sent to Windows computers come out unclear or very small on the other side?

I often send attachments to other people who do not use Macs and they advise me that the attachment is too small/they can't see it/it is unclear.
When I review their reply the attachment appears as a tiny document at the bottom of the email, however on my side it looks fine.

Section:”Follow these tips when you send files to Windows users:” at the bottom of the page.
http://support.apple.com/kb/PH14914

What's wrong with the built-in keyboard on my macbook? The caps button does not work rite, no matter what letter button i push they all come out capitals and the number keys when pushed display the special characters instead of the numbers!

the built-in keyboard on my macbook is not functioning right, the number keys when pushed display the special characters instead of the numbers,
the caps button doesn't work at all, the letter buttons display capitals when pushed whether the caps button is on or off, the shift keys are also out of whack!!
It seems it somehow got relocated to the "0" button because if you push and hold the zero button down the keyboard seems to operate normally, the number keys display numbers when pushed the letter keys display lower case when pushed but release the zero button and your back in the twilight zone!! Can anybody help me resolve this issue? one more thing im using an external usb keyboard right now and it seems to function properly if that helps any.

You would do better in the actual macbook pro forums (this is not).

Acrobat 8 - Create PDF from multiple images, they all come in bigger dimension

I have 9 TIFFS that are 1000 x 750 in size, 72 DPI. This is confirmed when I open them up in Photoshop. When I create a PDF from multiple files in Acrobat, they all come in much bigger in dimension. The resulting PDF is very big in dimensions.
I have searched the Internet and searched the Help/Manual and can't seem to fix this.
Any help would be greatly appreciated.
Thanks!
Scot

Scot,
Try going to Acrobat > Preferences > Page Display > Resolution and reset to 72 pixels / inch. I hope that helps!
Chris

After creating a DVD with music, the pictures all come out fuzzy and not sharp. Why

After creating a DVD with music, the pictures all come out fuzzy and not sharp. I have tried all the options, and nothing works, they all come out fuzzy. I have wasted about a dozen DVD's

Have you tried enhancing and sharpening in Premiere Elements before burning to disk?
What steps are you doing exactly?

HT1198 I shared disk space and my iPhoto library as described in this article. When creating the disk image, I thought I had set aside enough space to allow for growth (50G). I'm running out of space. What's the best way to increase the disk image size?

I shared disk space and my iPhoto library as described in this article. When creating the disk image, I thought I had set aside enough space to allow for growth (50G). I'm running out of space. What's the best way to increase the disk image size?

Done. Thank you, Allan.
The sparse image article you sent a link to needs a little updating (or there's some variability in prompts (no password was required) with my OS and/or Disk Utility version), but it worked.
Phew! It would have been much more time consuming to use Time Machine to recover all my photos after repartitioning the drive.

I reinstalled my plug-ins into Photoshop CC (2014) on Mac OSX 10.9.4, and they are greyed out in the Filters menu. How do I get them to work? I have tried everything including repairing permissions.

I reinstalled my plug-ins into Photoshop CC (2014) on Mac OSX 10.9.4, and they are greyed out in the Filters menu. How do I get them to work? I have tried everything including repairing permissions.

My apologies. Your post jogged my little grey cells to the point that I did a few experiments. In essence, you are right. My plug-ins do not work with 8-bit greyscale images. I like to deliberately shoot B&W and have a Wratten #12 minus-blue filter on the lens--as I used to do with film cameras.
The raw files ( Fujifilm's .RAF) were converted in Adobe CR by checking off "Convert to Grayscale" under the fourth tab. In the future, I will do the B&W conversion in Photoshop with either Nik or Topaz plug-ins.
Thanks for your input!

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
Thanks.

Can Adobe Collage be used for images smaller than the standard 1200 by 789?

Can Adobe Collage be used for images smaller than the standard 1200 by 789?

Hi,
* Photoshop Touch does have very good text capabilites.
* For opening the Collage as an Artwork (Merged layer) in Photoshop Touch, you just need to upload the Collage file to Creative cloud and import it directly into Photoshop Touch.
But if you are looking to preserve all the layers of the Collage file, you should download the Collage file as PSD from Creative Clould and import it in Photoshop Touch as layers.
* Collage does have canvas scalability, you can extend up the canvas on all the four directions. But i think in you case you are looking for having specific custom sizes of the canvas, which is not currently available in Collage. Currently you cannot shrink the canvas below the default canvas size.
Hope this is helpful. Please do revert back if you have more queries.
-Subbi

I am trying to get my computer to print on HP C310. It was working fine until 2 days ago and then stopped printing. I thought I could uninstall the HP software and download it again comes to find that I cannot now use the disk supplied with the printer.

I am trying to get my computer to print on HPC310. It was working until 2 days ago and then stopped working. I uninstalled the HP software thinking I could just reinstall and it would help but I cannot now install that software from the disk. How do I go about getting the old software I had on the computer and how do I get my computer to print. It gives my messages that it cannot find the printer or printer unknown.

Your operating system, Snow Leopard (OS X 10.6), does not support AppleTalk. Instead, in Snow Leopard the HP 4000 series printers need to be set up to communicate via IP.
Go to System Preferences and open the Print & Fax item. Is your printer listed in that pane?

After downloading Maverick, my photobooth images were out of chronological order. I've now downloaded Yosemite and they are still out of order. Is there a fix for this?

After I downloaded Maverick, I noticed that my photobooth images were out of chronological order. I've since downloaded OS X Yosemite (10.10) and they are still out of order. My version of Photobooth is 7.0 (719). Is there a fix for this? Many thanks in advance.

8-doing a factory reset, then repeating steps 1 through 6
Do you mean a restore to factory settings?. If so did you set up as new or restore from back up afterwards?

I'm trying to get the image to print correct size. i've tried center image, fit to media image, and they all come out the same size...smaller than the size in "image size". is this an Epson problem or Photoshop problem. Thanks!

Similar Messages

Maybe you are looking for