"I'm trying to set up my phpMyAdmin for my Wampserver"

I'm trying to set up my phpMyAdmin, but when I enter the information I get this Error and I have no ideal what to do. I would really appreciate any help some one could give me. (I'm still very much a rookie).
I'm on a Window's Vista prim, home
(The message that I get is this)
Welcome to phpMyAdmin 2.11.6
Error
MySQL said: Documentation
#1045 - Access denied for user 'root'@'localhost' (using password: NO)
phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server.
"I don't know where the configuration place is that they said I should check"?
Thank you for your help, Joan
P.S. I've never used any forum before so I'm not sure what I do next so I'll leave my e-mail adress [email protected]

Similar Messages

HT2105 I am trying to set up an allowance for someone and it isn't allowing me to do so.

I am trying to set up an allowance for someone and it isn't allowing me to do so.

Might be help on this thread for you > itunes keeps saying it cant verify my...: Apple Support Communities

HT4557 I'm trying to set up my iphone for home sharing and its says unable to set up home sharing. My password is correct, I've tried it three times with the same message. Any help?

I'm trying to set up my iphone for home sharing and its says unable to set up home sharing. My password is correct, I've tried it three times with the same message. Any help?

Hello daltonfromgbr
Check out the article below to troubleshoot you issue with connecting to Home Sharing. It will walk you through checking firewall settings as well as your network connection.
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Regards,
-Norm G.

Im am trying to set up my printer for web services and it is asking me for a proxy address

im am trying to set up my printer for web services and it is asking me for a proxy address

Have you downloaded and installed an App Store app that you downloaded free from some website instead of from the App Store? If so, that's a stolen app, and you need to delete it.

HT1751 I foolishly tried to set up two libraries for two diff. ipods. Now my original library is changed and all the music I purchased is not listing.   In purchased I see 906 songs - but I cannot get them to show up as a list - is there help out there?

I tried to set up two libaries so my two ipods could sync different kinds of music. This wiped out my original Itunes - I have been trying to get it back to the way it was. I have is backed up on Simple Save but do not want to plug that aback in since I am afraid it will then take up the new situation instead of allowing me to put the data on simple save back to the computer for Itunes.   I want to show my 908 songs that I have purchased and I cannot seem to do this... It shows in purchased= as 0-8 - but I cannot get them to list.   What am I doing wrong. I know I should have left it alone and never attempted something I know nothing about~ Thanks

I tried to set up two libaries so my two ipods could sync different kinds of music. This wiped out my original Itunes - I have been trying to get it back to the way it was. I have is backed up on Simple Save but do not want to plug that aback in since I am afraid it will then take up the new situation instead of allowing me to put the data on simple save back to the computer for Itunes.   I want to show my 908 songs that I have purchased and I cannot seem to do this... It shows in purchased= as 0-8 - but I cannot get them to list.   What am I doing wrong. I know I should have left it alone and never attempted something I know nothing about~ Thanks

Trying to set up my Printer for IP.

Hi, ive been trying to set up my iMac to work with my printer that has a IP set up already.
The printer is a HP OfficeJet 6110.The printer is currently set up to work with my two windows based machines. One being a desktop and wired, second being a laptop over IP. Both print to the machine perfect.
Now when I try setting up my printer on my mac I open up my Print and Fax window, then go to my Printer Browser. Right away it finds "P1", which is the name of the IP printer. It then sets it up through Apple Talk, its location being Local Zone. Then it goes to the option of "Print Using". First as Auto Select it sits and tries to find the printer. I once left it running for an hour with nothing. The i go to HP, and my printer is not listed.
Last I set it up as Generic PostScript printer, it works and I extit. I try to print something and the printer begins to run. But when it begins to print it is all symbols and random words.
If anyone could help me I'd be very happy.
Thank You.

Why is it set up as an AppleTalk printer? I thought you said it was an IP printer.
You need to open Printer Setup Utility and click on the Add button. Select the IP Printer icon in the toolbar. Select Line Printer Daemon - LPD from the Protocol drop down menu. Enter the printer's IP address in the Address field. Enter a short name for the Queue field (e.g., Officejet_6110.)
From the Print Using drop down menu select HP, thenlocate and select the printer driver from the list. Click on the Add button.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Trying to set up email account for sub account

I have been trying to set up an email account for a sub account through verizon message center all day with no luck. It won't let me past the first screen. Any ideas?

Mechrissy2 wrote:
I have been trying to set up an email account for a sub account through verizon message center all day with no luck. It won't let me past the first screen. Any ideas?
Are you getting some kind of error? This is a peer-to-peer support board, so the more information you give us to work with, the better. (Not personal information like username or password, though.)
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

I'm trying to set up an iPad for work and the apple id I was trying to use came back expired. I set a new password and then it said it was invalid. Now I'm locked out for too many tries answering security questions that I don't remember setting up. Help!

I seem to be stuck in apple ID ****. First the password was expired only two minutes after I finished setting up the account and then the new password was invalid. I don't know what to try next but this is making me crazy. And I'm locked out for eight hours for too many attempts at answering questions that I never set up in the first place. I don't know what gives but something is way off. I need to set up this iPad for work but I can't get past the login.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased. Some glitch occured and you have to restore/erse the iPod. Y will have to restore from an existing backup if y ohave one.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Help.... trying to set the browser title for reports called from 9i form

hello all
I am attempting to call a 9i report from an oracle 9i form .I am using the following code
repid := find_report_object('report5');
SET_REPORT_OBJECT_PROPERTY
SET_REPORT_OBJECT_PROPERTY (repid,REPORT_type,CACHE);
SET_REPORT_OBJECT_PROPERTY (repid,REPORT_DESFORMAT,pdf);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'sandy4');
v_rep := RUN_REPORT_OBJECT(repid,p1_id);
IF rep_status = 'FINISHED' THEN
/*Display report in the browser*/
WEB.SHOW_DOCUMENT('http://----.--------.com:8888/reports/rwservlet/getjobid'|| substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=sandy4,'_blank');
.. and so on
The reports RUNS FINE AND POPS UP AS A NEAT PDF internet explorer page !!!
I WAS WONDERING IF THERE IS ANYWAY TO SET THE BROWSER TITLE OF THIS REPORT THAT POPS UP..
DO I HAVE TO CHANGE SOME PROPERTY AT THE REPORT END
OR CAN I SET IT DYNAMICALLY BY PASSING AS A PARAMETER
FROM MY FORM
I HAVE SEARCHED EVERYWHERE FOR THIS
PL HELP
I WILL REALLY APPRECIATE IT IF SOMONE CUD HELP ME WITH
THIS
THANK YOU
SANDY

Hi,
It is possible to set the Document title for PDF output. Open the Reports Property Inspector, under PDF Document Taxonomy, you can set the Document title. But this does not show up in the browser when you open the document.
thanks,
Senthil

Trying to set up payment plan for final bill. Want...

Treid to set up a payment plan for my final bill thats just come through, nearly 2 months after the line was switched off.
Was told via phone to the indian call center that it was not possible to do this as the account was already closed. And that if i didn't pay the full amount by end of november that i would be taken to court.
Now i am confused, i have made a reasonable offer to pay off the final bill and they are saying no and want to take me to court cos i cannot afford to pay the bill in one lump!!!
Please help.

Was still in contract when my parent decided that they wanted to sell the house and wanted me out. was left with no choice but to leave.
Wasn't told that it was possible to set up a plan even when querying it before having to cancel.
Unfortunately this is the type of tactics I have come to expect from this company.
My gas and electric company were happy to set up a payment plan to pay the final bill, as was the water company.
The only company that i have had any problems with trying to do this is unfortunately BT.
Well I suppose I could wait until the account went to a collections agency to set up a payment plan with them. Just dont understand why BT themselves cannot do this.

I'm trying to set up the iPad for a person with limited vision. Is there a setting to keep text, especially in iBooks, from exceeding the width of the screen when zooming?

A

This is from the iPad User Guide:
Change a book’s appearance: Some books let you change the type size, font, and page color.
Change the font or type size: Tap near the center of a page to display the controls, then tap . Tap Fonts to select a typeface. Some books allow you to change the type size only when iPad is in portrait orientation.
Change the color of the page and text: Tap near the center of the page to display the controls, tap , then tap Theme. This setting applies to all books that support it.
Change the brightness: Tap near the center of a page to display the controls, then tap . If you don’t see , tap first.
Turn justification and hyphenation on or off: Go to Settings > iBooks. PDFs and some books can’t be justified or hyphenated.
(Sorry about the numbers above that were automatically inserted.)
Of course, there's also Settings > General > Accessibility for general large text settings for your iPad.

Trying to set up Time Capsule for WiFi access with Linksys router

Problem: I must use a Linksys router to connect to internet, since I have my telephone connected to this router (Vonage). I have set up a Time Capsule and connected it to the Linksys router, which is NOT wireless. I would like to use the wireless capability of the Time Capsule to provide wifi connection for laptop computers. The Time Capsule's wireless network is visible to these computers, but they do not connect to the network, since the Time Capsule is not the source of dynamic IP addresses; rather, the Linksys router is the source for IP addresses on my network. What must I do to get IP addresses supplied to computers attached via wifi?

The Time Capsule was set up using bridge mode. My initial error was to use the WAN port. After switching to a LAN port to connect with the Linksys router, the laptop computer was able to connect to the network wirelessly, but it could not obtain web page from the internet.
The laptop is a Dell Inspiron 6000; with an ethernet cable attached to the Time Capsule, it receives an IP address AND it can obtain web pages from the internet. The command "ipconfig /all" issued at the DOS prompt yields approximately the following:
Broadcom... (this is the ethernet card) ... IP address 192.168.15.104, with the gateway 192.168.15.1 (which is the Linksys router)
Intel(R) PRO/Wireless... (this is the wireless card) ... IP address 192.168.15.103, with the same gateway.
I can ping the iMac from the Dell laptop; the iMac is connected directly to the Linksys router. Running ping 192.168.15.104 from Terminal on the iMac succeeds, while ping 192.168.15.103 does not.

Trying to set up iChat server for office with Macs, PCs and iPads on LAN

Looking for advice on compatable clients and issues setting up iChat server in a small office environment to chat between Macs, PCs, and iPads on the LAN.

Same situation before here...
I would advise to go arround on the net, in search for applications at your taste.
We successfully installed the jabber clients for windows: Adium and SafetyJabber
For the pad's we use IM Pro
Works all togeather.
Suc6
Martyin

Trying to set up my macbook for wireless printing

Having problems connecting my macbook onto my wireless HP Photosmart printer - error states that it is not connecting to the printer. Please help.

PC's are not setup for iCloud.
What is really being attempted?
What errors (precise text) if any are appearing?

Trying to set up wireless connection for deskjet 7580

I have used HP Wizards to uninstall and reinstall printer software. Then I used a Wizard to help with wireless setup, but at this point, the Wizard is telling me to use the Setup buttons on the front of my printer. However, the option I'm given on my Setup screen on the printer are not the options that the Wizard thinks I have. So now I'm stuck. The printer worked fine as a wired printer to my PC, but I've never been able to network it.
I have a Dell desktop with Windows 7.
Any ideas?
This question was solved.
View Solution.

Hello and thank you for your update!
I understand your printer is currently connected USB, and you have no room to hook up a Ethernet cord directly to your router.
Unfortunately, the printer you currently own, to achieve wireless capabilities, you have to hook up a Ethernet cable to your router. If you look directly on your printer, in the Setup Menu, usually newer models can connect directly to their router (without a Ethernet cable) by accessing the Wireless Setup Wizard. If you had the Wireless setup Wizard on your printer, you could type in your WPA password and the Network Name from your router.
Also, even the full feature software will ask you to connect your Ethernet cable to achieve wireless.
I will provide an HP document on Installing the Printer Software on a Wired (Ethernet) Network.
If you have any further questions please let me know.
I worked on behalf of HP.

"I'm trying to set up my phpMyAdmin for my Wampserver"

Similar Messages

Maybe you are looking for