I m using iphone5 but I m not using our choices ringtone in ios 7 , 2nd I updated ios 7.1.1 after my iPhone 5 battery very fast drainage 5 to 6 time recharge my mobile per day so please help us quickly

I am using iphone5 we are not using our choices ringtone because not select ringtone option we are using only companies ringtones
Second problem I updated ios 7.1.1 software after my iPhone battery very fast drainage I charging 5 to 6 time per day this is a big problem please solve the quickly . You look samsung galaxy s5 system . What are you doing ? Samsung galaxy s5 very best operating system and future and battery life , some times we are thinking I will sell iPhone and will buy samsung galaxy s5 , you learn some system from samsung galaxy s5 new latest model ,
Please help us battery problem and this ringtones choices problem quick .

Apps could be affecting battery life. Try checking background app refresh and disable apps you really don't need and check location services and turn off apps here as well that you do not 'really' need.

Similar Messages

My Laptop BSOD 4 times in the last 90 days. Please help!!

HI, when I am surfing the internet using firefox my computer freezes and BSOD'ed. This doesn't happen often maybe like 4 times in the last 90days with the error. Below is the dump log. What can I do to prevent this from happening again?
*                        Bugcheck Analysis
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: ffffffff819ff390, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff8800164666f, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000005, (reserved)
Debugging Details:
Could not read faulting driver name
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002eb0100
GetUlongFromAddress: unable to read from fffff80002eb01c0
ffffffff819ff390
FAULTING_IP:
lcencvm+1766f
fffff880`0164666f 66f2af          repne scas word ptr [rdi]
MM_INTERNAL_CODE: 5
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: firefox.exe
CURRENT_IRQL: 0
TRAP_FRAME: fffff8800a532640 -- (.trap 0xfffff8800a532640)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=ffffffffffffffff
rdx=ffffffff819ff390 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8800164666f rsp=fffff8800a5327d0 rbp=fffffa8007113950
r8=0000000000000000 r9=0000000000000000 r10=fffff80002e08588
r11=fffffa800e305ac0 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na po nc
lcencvm+0x1766f:
fffff880`0164666f 66f2af          repne scas word ptr [rdi]
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80002cf5603 to fffff80002c79e80
STACK_TEXT:
fffff880`0a5324d8 fffff800`02cf5603 : 00000000`00000050 ffffffff`819ff390 00000000`00000000 fffff880`0a532640 : nt!KeBugCheckEx
fffff880`0a5324e0 fffff800`02c77fae : 00000000`00000000 ffffffff`819ff390 fffffa80`06d03000 fffffa80`07904140 : nt! ?? ::FNODOBFM::`string'+0x43801
fffff880`0a532640 fffff880`0164666f : fffffa80`07904140 00000000`00000801 fffff880`0a5327e0 20206f49`0a5327e0 : nt!KiPageFault+0x16e
fffff880`0a5327d0 fffffa80`07904140 : 00000000`00000801 fffff880`0a5327e0 20206f49`0a5327e0 fffffa80`0d884660 : lcencvm+0x1766f
fffff880`0a5327d8 00000000`00000801 : fffff880`0a5327e0 20206f49`0a5327e0 fffffa80`0d884660 00000000`0012019f : 0xfffffa80`07904140
fffff880`0a5327e0 fffff880`0a5327e0 : 20206f49`0a5327e0 fffffa80`0d884660 00000000`0012019f fffff8a0`00005e30 : 0x801
fffff880`0a5327e8 20206f49`0a5327e0 : fffffa80`0d884660 00000000`0012019f fffff8a0`00005e30 00000000`00000000 : 0xfffff880`0a5327e0
fffff880`0a5327f0 fffffa80`0d884660 : 00000000`0012019f fffff8a0`00005e30 00000000`00000000 00000000`00f8000c : 0x20206f49`0a5327e0
fffff880`0a5327f8 00000000`0012019f : fffff8a0`00005e30 00000000`00000000 00000000`00f8000c fffff800`02d15f4f : 0xfffffa80`0d884660
fffff880`0a532800 fffff8a0`00005e30 : 00000000`00000000 00000000`00f8000c fffff800`02d15f4f 00000040`00000003 : 0x12019f
fffff880`0a532808 00000000`00000000 : 00000000`00f8000c fffff800`02d15f4f 00000040`00000003 00000000`00000000 : 0xfffff8a0`00005e30
STACK_COMMAND: kb
FOLLOWUP_IP:
lcencvm+1766f
fffff880`0164666f 66f2af          repne scas word ptr [rdi]
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: lcencvm+1766f
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: lcencvm
IMAGE_NAME: lcencvm.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 502d3a35
FAILURE_BUCKET_ID: X64_0x50_lcencvm+1766f
BUCKET_ID: X64_0x50_lcencvm+1766f
Followup: MachineOwner

RI
These were related to lcencvm.sys is an integral part of SafeGuard FileEncryption product of Utimaco Safeware AG. I would remove it and use MSE in its place (at least to test)
http://www.microsoft.com/security_essentials/
Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\zigza\Desktop\040615-10374-01\040615-10374-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*D:\Symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*D:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18741.amd64fre.win7sp1_gdr.150202-1526
Machine Name:
Kernel base = 0xfffff800`02c18000 PsLoadedModuleList = 0xfffff800`02e5c890
Debug session time: Mon Apr 6 13:11:11.096 2015 (UTC - 4:00)
System Uptime: 10 days 2:00:58.659
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 50, {ffffffffae07f4e8, 0, fffff880016b866f, 5}
*** WARNING: Unable to verify timestamp for lcencvm.sys
*** ERROR: Module load completed but symbols could not be loaded for lcencvm.sys
Could not read faulting driver name
Probably caused by : lcencvm.sys ( lcencvm+1766f )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
PAGE_FAULT_IN_NONPAGED_AREA (50)
Invalid system memory was referenced. This cannot be protected by try-except,
it must be protected by a Probe. Typically the address is just plain bad or it
is pointing at freed memory.
Arguments:
Arg1: ffffffffae07f4e8, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff880016b866f, If non-zero, the instruction address which referenced the bad memory
address.
Arg4: 0000000000000005, (reserved)
Debugging Details:
Could not read faulting driver name
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80002ec6100
GetUlongFromAddress: unable to read from fffff80002ec61c0
ffffffffae07f4e8
FAULTING_IP:
lcencvm+1766f
fffff880`016b866f 66f2af repne scas word ptr [rdi]
MM_INTERNAL_CODE: 5
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x50
PROCESS_NAME: firefox.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
TRAP_FRAME: fffff8800f362640 -- (.trap 0xfffff8800f362640)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=ffffffffffffffff
rdx=ffffffffae07f4e8 rsi=0000000000000000 rdi=0000000000000000
rip=fffff880016b866f rsp=fffff8800f3627d0 rbp=fffffa8007080120
r8=0000000000000000 r9=0000000000000000 r10=0000000031465045
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po nc
lcencvm+0x1766f:
fffff880`016b866f 66f2af repne scas word ptr [rdi]
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80002d0a873 to fffff80002c8cec0
STACK_TEXT:
fffff880`0f3624d8 fffff800`02d0a873 : 00000000`00000050 ffffffff`ae07f4e8 00000000`00000000 fffff880`0f362640 : nt!KeBugCheckEx
fffff880`0f3624e0 fffff800`02c8afee : 00000000`00000000 ffffffff`ae07f4e8 fffffa80`06d03000 fffffa80`0de28800 : nt! ?? ::FNODOBFM::`string'+0x43801
fffff880`0f362640 fffff880`016b866f : fffffa80`0de28800 00000000`00000801 fffff880`0f3627e0 20206f49`0f3627e0 : nt!KiPageFault+0x16e
fffff880`0f3627d0 fffffa80`0de28800 : 00000000`00000801 fffff880`0f3627e0 20206f49`0f3627e0 fffffa80`0fea5680 : lcencvm+0x1766f
fffff880`0f3627d8 00000000`00000801 : fffff880`0f3627e0 20206f49`0f3627e0 fffffa80`0fea5680 00000000`0012019f : 0xfffffa80`0de28800
fffff880`0f3627e0 fffff880`0f3627e0 : 20206f49`0f3627e0 fffffa80`0fea5680 00000000`0012019f fffff8a0`00005e30 : 0x801
fffff880`0f3627e8 20206f49`0f3627e0 : fffffa80`0fea5680 00000000`0012019f fffff8a0`00005e30 00000000`00000000 : 0xfffff880`0f3627e0
fffff880`0f3627f0 fffffa80`0fea5680 : 00000000`0012019f fffff8a0`00005e30 00000000`00000000 00000000`00f8000c : 0x20206f49`0f3627e0
fffff880`0f3627f8 00000000`0012019f : fffff8a0`00005e30 00000000`00000000 00000000`00f8000c fffff800`02d2b1cf : 0xfffffa80`0fea5680
fffff880`0f362800 fffff8a0`00005e30 : 00000000`00000000 00000000`00f8000c fffff800`02d2b1cf 00000040`00000001 : 0x12019f
fffff880`0f362808 00000000`00000000 : 00000000`00f8000c fffff800`02d2b1cf 00000040`00000001 00000000`00000000 : 0xfffff8a0`00005e30
STACK_COMMAND: kb
FOLLOWUP_IP:
lcencvm+1766f
fffff880`016b866f 66f2af repne scas word ptr [rdi]
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: lcencvm+1766f
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: lcencvm
IMAGE_NAME: lcencvm.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 502d3a35
FAILURE_BUCKET_ID: X64_0x50_lcencvm+1766f
BUCKET_ID: X64_0x50_lcencvm+1766f
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0x50_lcencvm+1766f
FAILURE_ID_HASH: {efa0306d-354a-172c-cb23-f819c623f8c8}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

TS3694 I forgot my password and could not open until it is said "connect to iTunes". I connected to iTunes. for three hours, I restored it. But it is still not restarted. what can I do? I can not use my iPad 3 for three days. Please help me!

I forgot my password and could not open until it is said "connect to iTunes". I connected to iTunes. for three hours, I restored it. But it is still not restarted. what can I do? I can not use my iPad 3 for three days. Please help me!

Try and force your iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.

HT1937 Have unlock my iphone5 but it still not making me to use other network? What can I do pls?

I've unlock my iphone5 but is still not making me to use other network? What can I do? Plus when I put same network it make saying active on iTunes and I went iTunes i do know what to do or where to go? Pls help?

Force the phone into recovery mode and restore it. Do NOT restore your backup. The restriction settings are part of the backup. If you can't remember the restriction passcode, there's no other way around it.

I just got my replacement iphone5 but i am not satisfied that because the battery backup is worst and the one of the speakers have not working so i have doubted that its a brand new or refurbished one. i replaced it in the warranty period

hi i just got my replacement iphone5 but i am not satisfied that because the battery backup is worst and the one of the speakers have not working so i have doubted that its a brand new or refurbished one. i replaced it in the warranty period

thanks for the information about speakers. and i mean the battery back up the battery i always getting lower even im not use. and can u pls tell me how to check this as a brand new or not. b'coz in the store they gave me replacement phone without boxing. the phone was coverd by wrap and they never give any receipt for this

When I try to log on to icloud it says "Apple ID is valid but not an icloud account? Changed my Apple password a few times reset my system still no luck Please help!t

When I try to log on to icloud it says "Apple ID is valid but not an icloud account? Changed my Apple password a few times reset my system still no luck Please help!t

Welcome to the Apple community.
These types of messages often indicate a problem with the devices serial number, have you had your phone repaired at any stage or did you buy it second-hand.

I have a case number but have not received my serial number yet after 4 days. Please help.

I have a case number but have not received my serial number yet after 4 days. Please help.

Do you know where I go to do contact Adobe directly, please?
On Tue, May 5, 2015 at 11:06 AM, Barbara B. <[email protected]>

When the user press the button Calculate Tax (see attached doc) and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.

When the user press the button Calculate Tax and click on Tax details then this should be updated automatically. But it does not work it is empty and the user has to update manually.
All setup looks fine.
Please let me know what can be done on this?
Regards,
Peu

HarryAustralia wrote:
I recently updated my ipad wifi only to the new ios 6.1.2 and initially I had the auto cover lock option which can be seen in the Generals tab, but then it stoped working!! Before the update, the auto cover lock worked fine. So after trying all the options, I then did a complete reset on the ipad and now its gone all together from the General tab!! I can no longer see the "auto cover lock" option.
The iPad cover lock is for when you use a cover with magnets in it to lock and unlock the iPad when you close the cover or open it. Try running a refrigerator magnet along the sides of the iPad and see if that trips the iPad Cover Lock back into the settings.
That is not the same thing as the iPad Auto Lock setting which allows you to set an allotted time before the iPad goes to sleep.
You can try resetting all settings to see if the Auto Lock feature retinrs to the iPad.
Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. This can be a little time consuming re-entering all of the device settings again.

My iphone 5, with iOS 7.0.2, is heating and consuming the battery very fast when 3G is on, even when I'm not using it. Any solution?

My iphone 5, with iOS 7.0.2, is heating and consuming the battery very fast when 3G is on, even when I'm not using it. Any solution?

iOS 7 has many multiple tasks. You can save battery life to some extent by few steps. First go to location services and bettr 'Off' them which are not needed. (Ex. Notes.. Reminders.. Etc). Also you can off few apps in 'get notifications' centre. Also usage of 3g by any mobile consumes much battery life. Better to connect any Wi-fi

How can i download old settings with firefox sync ? i formatted my computer thinking that the data will be restore on login , but it's only letting my sync firefox with mobile device , can someonr please help my ?

how can i download old settings with firefox sync ? i formatted my computer thinking that the data will be restore on login , but it's only letting my sync firefox with mobile device , can someonr please help my ?

'''Did you backup whatever bookmarks you did have on the computer ? '''
Remember any restoring of bookmarks overwrites whatever he current set is, and you may not want to loose them.
Even if up until now you have not made any backups of Desktop bookmarks Firefox will have backed up some of them into sets of daily bookmark backups. Once you have backed up your current set you could look at what it has by restoring those bookmarks, you may find one of those sets is fairly complete.
By the way if you look at the profile files and folders that you should now have on the desktop you should see it contains a bookmarks backup folder, the size of the files within should indicate whether they contain anything.
You need to go into the bookmarks library and try the restore option. Backup each set that you look at if it has anything of use in it, before trying the next set. With look one of those will be a fairly complete set of bookmarks.
* USE '''Show All Bookmarks -> Import and Backup -> Restore '''
** see [[Restore bookmarks from backup or move them to another computer#w_restoring-from-backups]]_restoring-from-backups
I do not use Firefox on mobiles, but before you try anything further you do need to backup the desktop bookmarks and learn what existing backups you have. Unless you master that you are in continual danger of overwriting and loosing bookmarks.
Presumably you have already found this listing of help articles for mobiles
* [/products/mobile/bookmarks]

Im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

im having trouble connecting my macbookpro to the tv. im using a mini display port to hdmi adapter, when i switch tv/video to hdmi on the tv nothing pops up, and i dont have the arrangement tap on the display settings, please help!

I've found that the order of operations, so-to-speak, can be important when hooking up mini display port to HDMI. I have the most success with the following operations in this order:
1) Plug HDMI cable into mini displayport adapter (the cable should not be plugged into either the TV or the computer at this point)
2) Plug the mini displayport end of your new super-cable to the computer.
3) Plug the HDMI end into your TV.
4) Switch inputs on your TV to the proper input.
5) If still nothing on the TV, try a different HDMI port on your TV.
Hopefully this helps! Good luck.

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

Hello, I have an iPad Mini WiFi Cellular white 16Gb and I puted my sim inside it but, I cant read the text message that I recieve in the Sim. What can i do? And I can't put the sim in a cellphone coz it doesn't recognize it. Please help me! Thank you.

Hello, I have an iPad Mini WiFi Cellular white 16Gb and I puted my sim inside it but, I cant read the text message that I recieve in the Sim. What can i do? And I can't put the sim in a cellphone coz it doesn't recognize it. Please help me! Thank you.

iPads do not do SMS.

I have an ipod touch 3rd gen.I used the function of erasing all content and settings and now i am stuck on this screen with the apple logo and a loading sign for the past 17 hours.CAN SOMEONE PLEASE HELP!!!!!!!!!!!!

i have an ipod touch 3rd gen.I used the function of erasing all contents and settings and now i am stuck with this screen showing the apple logo and the loading sign for the past 17 hours.CAN SOMEONE PLEASE HELP!!!!!!!!!!!!

Hold down the on/off button and the home button for 20 to 30 sec, when the iPod starts and the Apple logo is on the screen release the on/off button but continue to hold the home button until you see the plug into iTunes screen. Connect the iPod to iTunes and you should be good to go.

My mobile phone is lost, please help me to find the serial number is: DNQKDBS8F8H4, my name is Yu Fan, thank you very much for this is my number: 15052995201

My mobile phone is lost, please help me to find the serial number is: DNQKDBS8F8H4, my name is Yu Fan, thank you very much for this is my number: 15052995201

We're not Apple here. We're users. We cannot locate your phone any more than you could locate ours.
If you did not have find my phone activated on your device, there's no way to track it.

I m using iphone5 but I m not using our choices ringtone in ios 7 , 2nd I updated ios 7.1.1 after my iPhone 5 battery very fast drainage 5 to 6 time recharge my mobile per day so please help us quickly

Similar Messages

Maybe you are looking for