I'm working with dual monitors but can't get it to boot up on my main screen, so all my icons get messed up

Hey all,
So I have a Mac Pro at work and it's connected to a 30" monitor and a smaller monitor. I have the larger one set as the primary screen, but when the computer boots it always uses the smaller monitor as the primary, load all my icon on the smaller monitor, then finally swaps everything to the larger monitor. This messes up all my icons on my desktop since they go from placment on a smaller screen then back to the larger one.
Is there any way to force the mac to boot up with the larger monitor? Or not screw up all my icons?

Yes.
A previous attempt was made through my home network, but after much name-calling at the tech support (dude wasn't listening to me) for the print server I bought (which SAYS they work with Mac... such BS), I gave up on that and hooked it back up to the PC. it worked fine. ButI want it to work with the Mac. It should be able to.
So, now it's hooked up, via USB, directly to the Mac. I love this MF printer... it's the one one I could find a the time that did everything I wanted... and I wouldn't go back to HP, even if they paid me. (that's what I had before)
Thanks
A.
iMac G5 Mac OS X (10.4.10)

Similar Messages

Need to launch Organizer Twice to work with Dual Monitors

If I open a project or either Photoshop Elements 10 or PRE10 and then click on Organizer it loads, but sits in the taskbar below. If I hover over it the AERO Windows (Win 7) pops up showing it's loaded. But It will not maximize. This is when I had last used it on a second monitor so I can easily compare before and afters. However, if I right click on it and close it, then reopen it, it launches perfectly in the 2nd monitor. Does this every time. I ussually leave it open all the time now to avoid this but I don't know how sesitive the catalogs are if the system is rebooted for some reason.
I did no specific configuration for dual monitors, Just dragged it over there when I wanted to use it.
Thanks,
Joe..

Hi Joe,
This is a known issue with dual monitors and got to know that Organizer people are tracking it as a bug for now.
Hope this will be fixed soon.
Thanks
andaleeb

T61 worked with Dual Monitors and now it does not

I'm having trouble getting two monitors to work. They used to work fine. There have been no changes to hardware. Now the DVI monitor is blank. The DVI monitor does work with other computers (I'm working through a KVM switch).
T61 running XP Pro
Docking station
Worked well in the past
Took laptop to a meeting and used VGA and Laptop displaying the same information (needed to fool around with a few things to get that to work (FN-F7, Presentation Director, not really sure what worked)
Came back to docking station and my second monitor does not work anymore.
Control Panel
Shows two monitors (1 Bright, 2 Grayed)
Can select and choose extend on the second monitor (1 Bright, 2 Bright)
Apply reverts to (1 Bright and 2 Grayed)
NVIDIA Control Panel\
Set up multiple displays show choice is Only use one display (Single)
Second monitor choice is grayed
Presentation Director
No option is shown for two monitors
Laptop and monitor choices exist
BIOS Display
Tried Internal and PCI options (no joy with either)
Display is set to VGA & DVI
Any suggestions??

The docking station is a type 2504. I have both the VGA and the DVI port hooked up to identical flat screen monitors. I have no intention of messing with that because the setup is working successfully via a KVM switch. Both ports and both monitors are working. However, there is a problem with swithching modes with the Lenovo laptop. The problem does not exist with any other computer working through the KVM switch.
Please note that:
this Laptop on this docking station, at my home, with all wiring and monitors unchanged, has worked for a long time.
I took the laptop off the docking station, went to a meeting, hooked up to a projector, and successfully configured the laptop such that the laptop screen and the projector were displaying the same screen at the meeting.
Then, I brought the laptop back to the same old docking station at my home and tried to regain use of my dual monitors unsuccessfully.
Using Control Panel display, and all sorts of combinations of NVIDIA Control Panel, the 2nd monitor would not be consistently detected by NVIDIA Control Panel. During these attempts, on a few occasions, I had an option to Set Up Multiple Displays in NVIDIA Control Panel; but there was no success in choosing this option. Returning to NVIDIA Control Panel / Displays would not present Set Up Multiple Displays as a valid option (not present or greyed - can't remember). I even went through permutations with the laptop screen open and closed, warm boots, cold boots, searchign for new hardware, etc. Nothing was successful.
Although changing the display within Windows Control Panel / Display was an option, any attempt to extend or replicate the dispay on the second monitor would fail and Windows Control Panel / Display would go back to the single monitor configuration was not successful and effectively ignored by both Windows Control Panel / Display and NVIDIA Control Panel.
You may note the use of past tense. I simply gave up and went to doing productive work on one monitor. After a few weeks, I went back to NVIDIA Control Panel and the second monitor was detected. I was able to Display / Set-up Multiple Displays via NVIDIA Control Panel. Subseaquently, I was able to use Windows Control Panel Display to enable and configure the second monitor and both monitors started working again (without having made any changes to wiring etc).
I don't believe there is any difference in how I used NVIDIA Control Panel on this successful attempt than in any of the earlier failed attempts. There seems to be some sort of a problem with getting the Lenovo to recognize that the second monitor is really there. Please addess this part of the problem as I expect to repeat the process in an upcoming meeting with this laptop.
Thank you for your attention.

Windows 7 Won't work with GT704WGB - Connects, but can't access internet or ping router

Upgraded my Verizon DSL.
I replaced an old WireStream DLS router and NetGear wireless access/router with Verizon's GT704WGB.
After I replaced it, Wireless connections from Windows 7 no longer work.
Help. Any ideas?
1. The GT704WGB installation seemed to be easy and successful.
2. I have 3 devices and 4 operating systems
    a. An iPhone - It connects to my wireless network and works fine.
    b. An Acer lap-top running Windows XP service pack 2 - It connects to my wireless network and works find.
    c. An Hp Pavilion lap-top running Ubuntu Linux
         i. It connects to router via cable and works fine.
        ii. It connects to router wirelessly and works fin.
    d. The same Hp Pavilion when booted to Windows 7 doesn't work wirelessly. :-(
         i. It connects via cable to router and works fine
        ii. When I disconnect cable and connect wirelessly IT DOESN'T WORK. :-(
What happens is Windows reports the the wireless adapter has connected to the network, but says it is NOT CONNECTED TO INTERNET. Further I can't ping the router, 192.168.1.1. I have checked the IP4 properties and settings for the adapter. They seem
fine.
1. Adapter has an address on the network.
2. DHCP is enabled.
3. Gateway is provided automatically by DHCP
4. DNS is provided automatically by DHCP.
Pinging router gets no response. Attempting to resolve a name, www.google.com reports unable to resolve name.
All of this works perfectly when directly cabled to router.
Any help with how to troubleshoot this would be appreciated.
Solved!
Go to Solution.

Solved my own problem. Sorry for the spam. :-)
Windows does not support multiple gateways. I had foregotten I had a 2nd wireless access point/router plugged into the network (Cisco/Linksys E1000). That router had been working fine in combination with old SpeedStream DSL router from Verizon, but apparently it introduced a second gateway address which was in conflict with GT704WGB.
Solution:
1. Unplug Cisco E1000. Reset it to factory settings by pushing red button.
2. Plug Cisco E1000 back into network.
3. Use Cisco CD and setup.exe to "install" E1000.
4. Use Cisco CD and Cisco Connect to reconfigure E1000.
5. Done.
All devices working with all OS's including Windows 7.

My Thunderbolt-port equipped 15" Macbook Pro (Early 2011) works with other monitors but not with my Thunderbolt Display.

I just got a thunderbolt monitor and excitedly, I plugged my early 2011 thunderbolt port equipped 15" Macbook Pro (running 10.8.2) into it and... no image on the monitor.
Ok, so I know that the TB display works because I plugged a mid-2012 13" Macbook Pro into it (running 10.7.5) and it works perfectly. In fact, I'm using it to type this message right now.
Other details:
- in both the displays preference pane and about this mac/system info, the 15" mbp recognizes the display, yet... no picture either clamshell open or closed. restarted with it plugged in and not plugged in, no difference. also? sound comes through the monitor.
- ALSO, i plugged in a mini displayport monitor into the 15" port, and it displayed fine, so the port seems to be doing something.
see my conundrum?

It should just work - if it's not working with your 2011 model (works just fine with my 15" late 2011, right out of the box) I would get in touch with AppleCare as soon as possible and see what the senior techs may have to say...
Clinton

Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
Below is a summary of the issue:
After selecting datasheet view beow error occurs:
    "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available."
    "Unable to retrieve all data."
    The item counts displays say 100 out of 14000 items.
Exporting List to excel is giving only 2000 records out of 14000 records.
Other Observations   -
This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
I have checked the Alternate access mapping setting ,its fine.
It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
I checked below links also ,but doesn't seem to work in my case.
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
I am sharing my finding.
1. First install the
KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
These two steps resolved the issue in our environment. Hope it might help others as well.
Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

try xxx - may work
_may_ work.

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data is not.) but

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data does not.)

HI Dave,
I'm surprised you get no message when you attempt opening the Excel document in Numbers.
I'm assuming Numbers 3.1, since you are running Mavericks.
Does the Numbers file that opens show any content?
Does it contain a table?
How large?
Does it contain more than one tab (indicating more than one sheet)?
Do those other tabs contain a table?
Have you checked those tables for data content?
There have been cases in the past of imported documents opening with white text on a white background, giving the appearance of containing nothing. Check for this by selecting a block of cells, then applying a Fill colour or a Text colour using the Format button (paintbrush).
I'd also suggest attempting to open the Excel files using LibreOffice, which can be downloaded from the linked website.
Regards,
Barry

TS3510 I only have one apple ID and facetime has worked with it before, but now I get the message "Unable to verify email because it is already in use". I have looked ofr a solution but can't find one. can anyone help please?

I only have one apple ID and facetime has worked with it before, but now I get the message "Unable to verify email because it is already in use". I have looked ofr a solution but can't find one. can anyone help please?

I spoke with Apple Support this morning and they believe anything MobileMe related is due to the conversion over to iCloud that's taking place.
As for other email clients, check with your host to see if settings have changed on their end. I use inmotionhosting.com and over the weekend the updated their outgoing requirements so that a password authentication is now needed.
Hope that helps get some on the right path to resolving their issues!

Please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

please help. just got my jabra halo, worked fine with my iphone4 but can't use it on my macbook pro. it always prompts " the devise does not have the necessary service

Found these instructions here:
https://discussions.apple.com/message/15388885#15388885
I found an answer that worked for me. I am using an iMac.
(1) Sign out of the iTunes store
(2) Open a NEW account with a new Apple ID
(3) Go through the sign up process and then go to the ACCOUNT INFORMATION page
(4) Go to RECOMENDATIONS & PING POSTING
(5) Turn on Genius there
Once the Genius updates, you can sign out and then sign in under your original Apple ID or the e-mail address you use for the iTunes store. All my store credit was there and now Genius worked.
Rather odd but I actually like the Genius at times except when it can't deal with some of my lesser known bands that I listen to.
Worked for me.

My wall charger is showing sign of charge but it's not charging, last three days I charged my iphon to mac book pro, what can do for charge with my wall charger. And I tarted also 3 deferent chargers wich is working with other iPhones but my iphon is not.

My wall charger is showing sign of charge but it's not charging, last three days I charged my iphon to mac book pro, what can do for charge with my wall charger. And I tarted also 3 deferent chargers wich is working with other iPhones but my iphon is not charging it's only showing the sign of charge.

Hi there Zeeshan Saeed Al Barvi,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
-Griff W.

I am tring to start work I masseg and facetime on my I pod touch 4g on IOS 6 but not work with my apple ID can you help my

I am tring to start work I masseg and facetime on my I pod touch 4g on IOS 6 but not work with my apple ID can you help my

Maybe here. You are not really provided much information like what happens when you try.
iMessage won't work after iOS 6 upgrade: Apple Support Communities

[SOLVED] Help with dual monitors (second monitor won't wake up)

Hi. I'm trying to set up dual monitors, but I can't seem to get it to work.
I've got an ASUS P8H67-M EVO motherboard, and I'm using the xf86-video-intel driver. I'm using one VGA and one HDMI.
xrandr gives this
xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 32767 x 32767
VGA1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm
1680x1050 60.0*+ 74.9
1600x1000 60.0
1280x1024 75.0 72.0 60.0
1440x900 75.0 59.9
1152x864 75.0
1024x768 75.1 70.1 60.0
800x600 72.2 75.0 60.3
640x480 72.8 75.0 66.7 60.0
720x400 70.1
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.0*+ 50.0 60.0
1920x1080i 50.0 60.1
1680x1050 59.9
1600x900 60.0
1280x1024 75.0 60.0
1280x960 60.0
1152x864 75.0
1280x720 50.0 60.0
1152x720 60.0
1440x576i 50.1
1024x768 75.1 60.0
1440x480i 60.1
832x624 74.6
800x600 75.0 60.3
720x576 50.0
720x480 59.9
640x480 75.0 60.0 59.9
720x400 70.1
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
So it looks to me like both displays are being detected. The geometry looks such that one display is on top of the other, but I can change that using an xorg.conf.d config file (e.g. https://wiki.archlinux.org/index.php/Mu … xorg.conf). I also tried using arandr.
The real problem is that the display on HDMI3 just isn't "waking up". The power is on, but it just sits there in sleep mode.
Any help would be great. I might just be missing something simple. Thanks.
Edit: I just saw a short list of window managers near the bottom of the Arch Multihead page (https://wiki.archlinux.org/index.php/Mu … _xorg.conf). I don't see openbox on that list. Does that mean I'm SOL if I want to use openbox with multiple monitors? This page seems to imply that it should work fine with openbox http://magnatecha.com/dual-monitors-wit … nd-xrandr/.
Last edited by Pacopag (2013-08-19 18:58:36)

I use XFCE, and when I boot my computer I just run:
xrandr --output DVI-I-1 --auto --output DVI-I-2 --auto --left-of DVI-I-1
I'm assuming if you modify the names appropriately that it'll work too. I have had issues before trying to run dual monitors without taking both outputs off of a single video card (which is what I'm doing now). For example, I had a graphics card with one (VGA) output and a VGA output on my motherboard. But, connecting the graphics card disabled the on-board VGA. So it is possible (I'm not an expert here) that two displays coming off the motherboard may not work for hardware reasons.

[SOLVED] openbox margins with dual monitors

Hi community,
I have stumbled to a nasty problem on my first incursion to dual monitors in openbox.
I'm using xrandr with this command (which works just fine BTW):
xrandr --output LVDS --mode 1280x800 --primary --output VGA-0 --mode 1280x1024_60.00 --gamma 1.0:1.4:0.85 --right-of LVDS
and have set a Virtual screen in xorg.conf of 2560 x 1024 pixels.
But, my laptop monitor only handles 1280x800, while my external LCD monitor has 1280x1024, so there is a virtual area under my laptop screen which i'm not using, but i dont really care about that.
The problem is that when I'm setting screen margins, so that maximized windows will respect the panels in the bottom (tint2), in rc.xml (or by obconf) the margins are applied to the virtual screen and only are practical on the external monitor wich has more pixel height.
I'm really missing some kind of per monitor margin settings in openbox, maybe there is and i haven't found it? It makes me wonder because openbox can maximize windows to a single monitor, even if the whole layout it's treated like a virtual screen, so it has some way of distinguishing between them.
I would appreciate any suggestions, thanks.
Last edited by andreamer (2010-07-26 18:32:15)

TL;DR - I'm not aware of any acceptable solution at the moment.
Basically, what you're having problems with, is the "dead area." It can really be quite a pain in the butt if window managers or other screen aware applications don't anticipate it properly. To my knowledge, Openbox doesn't support margins on a monitor-by-monitor basis. In reality, you shouldn't need to be setting margins anyway. Tint2 should be reporting itself as a taskbar, and Openbox should be respecting that.
I have dead area too, with multiple monitors, and Openbox respects both of the KDE taskbars I have running (one on each monitor). (I use KDE and simply replaced Kwin with Openbox.) This tells me that tint2 should be able to cooperate with Openbox. I remember trying tint2 a while ago, and didn't fine it adequate in a dual monitor environment (it was probably a year ago or so). tint2 would need to be setting the _NET_WM_STRUT_PARTIAL hint, and I'm not sure if it is (or if it's doing it properly). See http://standards.freedesktop.org/wm-spe … #id2507618
Also, I do know that the developer for Openbox recently got a dual monitor setup, and she's been adding additional support for dual monitors a little at a time. Hopefully with 3.5, there will be a lot more support. (Margin support for multiple monitors would be great, because it could be a good utility knife for applications that don't care about multi-monitors setups and don't set the proper hints.)
If you're capable of modifying tint2, my course of action would be to try something that works (like the KDE taskbars) and record the hints being set there. Then compare them with tint2 and try to mirror KDE's setup. (If you're a programming lacking experience with X and related nonsense, I'd be more than willing to offer what guidance I have.)
Also, I developed a panel myself (and got pretty far along) using the PyGTK toolkit... But I can't remember if I solved this problem or not. I'll try to check it out and get back to you. (I got as far as implementing a widget system that includes a task list, system tray, clock, menus... It just isn't polished very well. My original intention was for it to be a more robust PyPanel with dual monitor support.)
Last edited by BurntSushi (2010-07-24 22:46:23)

Interfacing with dual-monitor machine

Hello all--
I've got a G5 at home with dual monitors on which I run 3D animation software with lots of panels. I'd like to be able to control the G5 from work using a laptop (possibly also connected to an external monitor). Is it possible to display both screens of the desktop using ARDv3 on the laptop? Some users have mentioned they can do this but the size of the remote screens is unsatisfactory. So, again, can you visualize both screens well via the remote computer?
Thanks for any help you can offer.

you can view both screens at once but it will be scaled to fit on the screen you have... so what you see is dependent on the resolution of both client monitors and your admin computer's monitor.
you can also select to view a single monitor of the client computer.
i've never run ARD admin on a computer with 2 monitors so i'm not sure how it handles it but i'm guessing that you can view both monitors on both admin monitors.... it'll probably scale down or up dependent on resolution.

I'm working with dual monitors but can't get it to boot up on my main screen, so all my icons get messed up

Similar Messages

Maybe you are looking for