[SOLVED] Help with dual monitors (second monitor won't wake up)

Hi. I'm trying to set up dual monitors, but I can't seem to get it to work.
I've got an ASUS P8H67-M EVO motherboard, and I'm using the xf86-video-intel driver. I'm using one VGA and one HDMI.
xrandr gives this
xrandr
Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 32767 x 32767
VGA1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm
1680x1050 60.0*+ 74.9
1600x1000 60.0
1280x1024 75.0 72.0 60.0
1440x900 75.0 59.9
1152x864 75.0
1024x768 75.1 70.1 60.0
800x600 72.2 75.0 60.3
640x480 72.8 75.0 66.7 60.0
720x400 70.1
HDMI1 disconnected (normal left inverted right x axis y axis)
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.0*+ 50.0 60.0
1920x1080i 50.0 60.1
1680x1050 59.9
1600x900 60.0
1280x1024 75.0 60.0
1280x960 60.0
1152x864 75.0
1280x720 50.0 60.0
1152x720 60.0
1440x576i 50.1
1024x768 75.1 60.0
1440x480i 60.1
832x624 74.6
800x600 75.0 60.3
720x576 50.0
720x480 59.9
640x480 75.0 60.0 59.9
720x400 70.1
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
So it looks to me like both displays are being detected. The geometry looks such that one display is on top of the other, but I can change that using an xorg.conf.d config file (e.g. https://wiki.archlinux.org/index.php/Mu … xorg.conf). I also tried using arandr.
The real problem is that the display on HDMI3 just isn't "waking up". The power is on, but it just sits there in sleep mode.
Any help would be great. I might just be missing something simple. Thanks.
Edit: I just saw a short list of window managers near the bottom of the Arch Multihead page (https://wiki.archlinux.org/index.php/Mu … _xorg.conf). I don't see openbox on that list. Does that mean I'm SOL if I want to use openbox with multiple monitors? This page seems to imply that it should work fine with openbox http://magnatecha.com/dual-monitors-wit … nd-xrandr/.
Last edited by Pacopag (2013-08-19 18:58:36)

I use XFCE, and when I boot my computer I just run:
xrandr --output DVI-I-1 --auto --output DVI-I-2 --auto --left-of DVI-I-1
I'm assuming if you modify the names appropriately that it'll work too. I have had issues before trying to run dual monitors without taking both outputs off of a single video card (which is what I'm doing now). For example, I had a graphics card with one (VGA) output and a VGA output on my motherboard. But, connecting the graphics card disabled the on-board VGA. So it is possible (I'm not an expert here) that two displays coming off the motherboard may not work for hardware reasons.

Similar Messages

Need help with a Asus 27" monitor with webcam problem.

Need help with a Asus 27" monitor I bought. Model VK278Q. The issue is that the webcam will not work properly. Various applications can see the webcam, but I just get a black box. From what I have read, the issue seems to be that there are no official drivers for the webcam.
I thought someone in this community might be able to offer some help before I return the monitor. I read somewhere that it may be possible to tweat the OS so that the iSight software will work for the monitor webcam.
Thx

NAVARRO360 wrote: ... there is no simple fix? ...
Eureka! You now understand the situation.
Even the old standard for Mac OS X drivers for non-compatible cams, macam, says that it has no driver for ASUS (20") monitor camera.
The macam status shows:
not working (no documentation)
With no working driver for the 20" ASUS, it is not surprising that there is none for the 27" either. There may be good reason that ASUS won't (or can't) offer either the technical documentation or a Mac driver for their monitor's inbuilt webcam. However, they apparently do not publish that information.
If ASUS Technical Support cannot provide the driver you need for OS X, the ASUS will continue to be a ridonculous (sic) monitor whose webcam will not work with your OS X Mac. The only other simple fix I can think of is to use the ASUS with a different PC that is compatible with this monitor and its inbuilt webcam. What you do is certainly your choice.
Message was edited by: EZ Jim
Mac OSX 10.7.3

Quick help with dual booting

I have hopped around on different distros and I found that Archlinux would be the best solution for me. However, I need help with dual booting Archlinux and Vista as I will need Vista around for one program and a game that do not work with any Linux distro that I have tried. I have not done a text based install before, I have only used newbie distros but I want to move on to Archlinux.
I will only need one partition for Vista and one for Arch. I believe I can achieve the goal of dual booting them by shrinking the vista partition, and then installing Arch in the remaining space and use GRUB to boot the necessary partitions when my laptop is powered on. This works with Ubuntu, so I assume it shall be the same basic concept with Arch. I can follow the instructions on installing, and the installation is easier than I had expected it to be. I have one question, how would I go about using the above technique that I mentioned during the install? I would like to know how to do it correctly, I cannot risk messing up Vista. I'm fifteen and my dad would be very frustrated if I did mess up Vista. I would appreciate some specific instructions, because I really like Arch from what I have read. I also look forward to being an active member in the community as well if all goes well.

Welcome!
Another young one I see! I'm currently 17, however I started using linux when I was 13 (8th grade year).
You can resize the vista partition by using gparted. You can download the gparted livecd from there website (http://gparted.sourceforge.net/download.php). I do not know specific directions, but it is pretty obvious how to resize, and if you need help you can probably google something like "resize partition gparted". I WARN YOU that you do risk data loss resizing the partition. I don't believe the risk is high, but it still there, so backup any important data that you may have in case something goes wrong!!
Do you have your own computer that you can experiment on? That might be a safe option than using your dads. I am been fortunate to have hand-me-down systems, but when I was young I made my dad angry quite a few times "experimenting!"
If your dad's system has enough juice, you may want to consider install arch in a virtual machine to get idea of however thing works. Following the Beginners Guide on the wiki will be you best bet for a successful and well configured machine (http://wiki.archlinux.org/index.php/Beginners_Guide). If you really want to play it safe you can even go as far as install windows in a virtual machine, resizing the partition, and installing arch in the same virtual machine.
I hate to say this, but if you absolutely can not mess up vista, I would advice against installing any other OS and messing with the partition scheme. As whenever you mess with the partitions you run a risk of messing up Vista (or any other os for that matter). If you don't already have your own computer which you can tinker with, it might not be a bad idea to look at getting one. They are becoming cheap, you can build one for about $300-$400USD, or buy one for probably around $400.
Hope this helps a bit...

Need help with dual monitor setup for KDE 3.5.5.

Here's my hardware:
NEC MultiSync LCD 1530V: 1024x768 (analog)
Samsung SyncMaster 941BW: 1440x900 (digital)
nVidia Dual head AGP video card.
The dual monitor works under dual-boot Windows, boot up and pure Linux console. I've googled around for help, changed my xorg.conf file accordingly to some sites, but it wasn't much help.
Here's my working xorg.conf:
Section "ServerLayout"
Identifier "Simple Layout"
Screen "Screen 1" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "Auto" # Auto detect
Option "Device" "/dev/input/mice"
EndSection
Section "Monitor"
Identifier "NEC LCD1530V"
HorizSync 31.5 - 48.5
VertRefresh 50.0 - 70.0
EndSection
Section "Device"
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
Identifier "NVIDIA GeForce"
Driver "nvidia"
Option "NoLogo" "true"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "NEC LCD1530V"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Using this xorg.conf file, only my NEC LCD analog monitor could display KDE while the Samsung digital can't.
Any suggestions?

Thanks for your help guys, I'm halfway there.
The second monitor shows the KDE desktop, but it isn't exactly what I expected. Right now, both monitors display at 1024x768 (each) or 2048x768 (total). The larger monitor stretches and distorts the display of 1024x768 to its natural resolution at 1440x900 and it isn't what I wanted. Other than that, the dual desktop setup behaves what I expected to.
Here's a snippet of my xorg.conf that currently works:
Section "Monitor"
Identifier "NEC LCD1530V"
HorizSync 31.5 - 48.5
VertRefresh 50.0 - 70.0
EndSection
Section "Monitor"
Identifier "Samsung SyncMaster"
HorizSync 31.5 - 60
VertRefresh 60.0 - 70.0
EndSection
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "NVIDIA GeForce"
Driver "nvidia"
Option "NoLogo" "true"
Option "TwinView" "true"
Option "TwinViewOrientation" "LeftOf"
Option "SecondMonitorHorizSync" "30-50"
Option "SecondMonitorVertRefresh" "60"
# Option "MetaModes" "1440x900, 1440x900; 1024x768, 1024x768"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "NVIDIA GeForce"
Monitor "NEC LCD1530V"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen 2"
Device "NVIDIA GeForce"
Monitor "Samsung SyncMaster"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1440x900"
EndSubSection
EndSection
Anyone have an idea?
EDIT: Oh snaps. I just did a pacman -Syu and it upgraded Arch Linux to 0.8 and the 2nd monitor stopped working.

Alittle help with dual-setup with ati radeon 5770

Hello everyone, I have been trying to setup a dual display with 2 flat panel monitors.
1. A WestingHouse Digital Electronics "17"
2. A Goldstar Company Ltd "23" (Main Display)
Im currently running the gnome desktop, what im trying to setup, is have both the gnome desktop show up on both monitors. For example if I wanted to move something from my main monitor to the smaller one to the left of me, I want to NOT be able to do that, and only have the mouse be able to move accross the 2. 2 Seperate desktops one 2 seperate screens. Im not quite sure what its called, Im thinking maybe its a clone Desktop? Anways, The graphics card Im using is an
Ati Radeon 5770, has 2 vga ports. I currently have the "video-ati" driver installed and works well with my main screen, but im unable to get my secondary screen (to the left of me) working. I tried going into System>>Preferences>>Monitors, and tried tinkering with the display, and tried enabling the 2 monitors and moving them from left to right, to see if that would possibly let it show up or start to function, but only the main screen works. I generated a new xorg.conf, since I didnt have one prior to installing Arch, I was following these to guides
http://en.gentoo-wiki.com/wiki/X.Org/Dual_Monitors
http://en.gentoo-wiki.com/wiki/X.Org/Dual_Monitors/ATI
both are very nice, but Im still not quite understanding yet. Defiantly am trying. I edited my xorg.conf a few times, but got the same results each time, just the screen going blank and X crashing. I have here a copy of my xorg.conf, Xorg.conf.log, and xrandr output
Xorg.conf
http://pastebin.com/hbmdKrfv
Xorg-logs
http://pastebin.com/USZvtAMJ (Im thinking the Vsync and Hsync have something that might help)
Xrandr
http://pastebin.com/2cV95Ef4
Thank you guys!

An xorg.conf may not be necessary, but I still find it nice to have the control that the file provides.
In looking over yours, I see several things that could be causing your problems.
First off, I notice that you have Screen0 that is using Card0 and Monitor0. This part looks ok.
When I look at Screen1, I notice that you are using ATI Graphics Adapter1 and Monitor1. I don't see entries for either of those, although you have an ATI Graphics Atapter2, but there is no entry for your second monitor.
I also notice that you are trying to use both radeon and fglrx as drivers. As far as I know (and I don't have an ATI video card at the moment), you can use one driver or the other, but not both.
After you have these things fixed, then you can put in the Screen section in your server layout to describe the positioning of your second monitor.
All in all, the issues that you have to fix are minor, but frusterating if you are too close to the situation.
Good luck.

Help with dual monitors

I installed Arch on an old Asus MB, and have spent a couple days trying to get dual monitors working. The board is a P4S8X-X with no onboard video, an AGP slot, and six PCI slots.
First, I tried using an AGP card together with a PCI card with no luck. I tried using two ATI pci video cards, again no good.
So, I downloaded a MB manual and discovered that the PCI slots and the AGP slot are all shared. Quote the manual: "When using PCI cards on shared slots, ensure that the drivers support 'Share IRQ" or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable."
I'm wondering if dual monitors are possible with this board. I have another Asus board with an AGP and three PCI slots apparently not shared.
Couple years ago, I installed dual monitors on my FreeBsd computer, using two cards on an MSI board, with no trouble. What I'm looking for is two independent monitors, each able to run an application. I use the JWM window manager. I haven't posted an xorg.conf file as there have been too many to display.
Any help is appreciated.

Problem solved. I switched motherboards and dual monitors are running.

Need some help with a Business Process monitor PPO Collector

We have one particular monitor that won't return any value, consistently gray.
Monitoring scenario is Shopping Cart/PPO process - we have cases where Shopping carts fail to create purchase orders in our ECC system.
We can see the errors, and have created a monitor with a threshold of '1" just to try to trigger the alert.
Process being monitored is PURORD006, monitor object is boppocol
Configuration is generated and activated, there are no errors in SLG1. Monitor runs every 5 minutes. There are no config errors showing anywhere, and there are no authorization errors for any users.
There are a few red extractors, but they're all workload/e2e related, not BPMON. Agents are green.
Solman is 7.1 Sp12, newly upgraded, all Managed system config/techmon/bpm config clean and green . This also did not work in our previous SP10 incarnation.
Does not matter which ECC system we configure for this, they all act the same way, no metric. Like there's something fundamentally incorrect with our setup or we aren't understanding how this particular monitor works. We have other BPM monitors that work just fine, so it's not a complete config failure, just this one particular one.
ECC system has st-pi 2008-1-700 10
st-a/pi is 01R_700
System is not allowing me to embed screenshots.. grr..... attached screen shots.
Any help appreciated.
Thanks.
Bernie

First of all, if you have IT resources inhouse (or even external) consider asking them.
Also having a backup of the old db would be my recomandation, also check first if there
is data inside which you might want to export as long as the old tms is up and running.
There are a lot of different permissions settings which could grant you access to everything, but
stop you from dropping / deleting the old db.
You can drop a database in different ways, gui, command line,...
This is more a Microsoft SQL than a TMS question.
For more info I would recomend to check the Microsoft sites (and forums) or google.
Like this article here: "Deleting a Database"
http://technet.microsoft.com/en-us/library/ms189278(v=sql.105).aspx

Help with Resolution on External Monitor

I want to set my HP Envy 15t to drive an external monitor, not as an extension, but rather as my primary monitor. My external monitor is a Viewsonic VX2250, a little older, and requires that I use a HDMI-to-VGA adapter. (The Viewsonic also has DVI inputs...not sure it that would make a difference.) On my current tower setup, I use the monitor in its recommended (or native mode) setting of 1920x1080. I like this screen a lot.
The adapter is a Bytecc HM-VGA005 and the specs seem to suggest that it can handle a variety of video resolutions - Full HD (1080p), WUXGA (1920x1200 RB mode), and UXGA (1600x1200 VESA mode).
The 15t currently runs in the recommended resolution of 1366x768. If I understand the specs right, in HD mode it's 1366x768 and in FHD mode it's 1920x1080. The graphics card is an Intel HD Graphics 4600. Is this the reason that I can only get HD resolution and not FHD resolution on the laptop?
But whenever I plug all this together and try and change the laptop screen resolution settings, the external monitor only shows 1024x768...pretty lousy. I have it so that the laptop screen is dark and only the external monitor is on. But there doesn't seem to be any choices I can make to improve this resolution. I've checked to see that the graphics driver is up to date and it is.
What do I do to get the best screen I can on the external monitor? Would buying a new monitor with HDMI inputs achieve better results? Do I need a different adapter?
Thanks...Kurt
This question was solved.
View Solution.

Me again! Well, it was a bit of the nut behind the wheel. I checked in with the store that I've been buying my cables, adapters, etc. He said to bring the Viewsonic monitor by to see what might be going on. As I was setting up, he asked about power to the adapter. I had the USB cable but didn't think it was needed. But after putting everything together in addition to power to the HDMI-VGA adapter, I could see I was getting the resolution that I was hoping for. Why it worked on the Dell monitor, no clue...maybe a better monitor or different VGA cable. The Bytecc adpater didn't come with any instructions, so I just didn't know.
All is well. Hope this helps someone in the future.
Kurt

Help with Playback in Source Monitor

when I import footage of a specific interview into PP, at 2;45 the audio suddenly jumps back to the begining of the clip while the video continues to playback as usual. The original file is fine, there is no problem playing it in any other program, and this only happens with this one clip, no others are affected. I've removed this clip and re-imported it, up-dated PP, and re-booted my computer all to no avail. Any suggestions? This is quite frustrating.... I've lost some of my previous work, and would just like to be able to have useable interview footage...
Thanks for you help,
Ben

Here's a few details:
Premier Pro CS6 with 6.0.1 update (updated again as soon as problem noticed)
Using Windows 7
Using G-spot the video codec is "avc1" and under the "Name" category it said "H.264"
The Audio codec is mp4a: MPEG-4 AAC LC
the file type is MPEG saved as a ".MOV"
Note that I'm using a lot of other footage shot from the same camera in the same codec in this project (and in several other projects) and have not encountered this issue. I've read all those posts and get the idea of what a codec is, but I'm no expert. Let me know if this information is sufficent or if there's more I can provide.
No Error messages, just editing as usual, and I noticed the problem with the audio when I tried to use footage after a particular point
Not running any other software at the time I first noticed the problem. Did go back and check the auto saved files and noticed that the footage was doing the same thing there as well.
Haven't installed any third party effects or codec's
As far as hardware is concerned I'm using a pretty basic PC setup. It's a laptop with an i7-3720QM 2.6GHz processor (quad core), 16 GB RAM, an NVIDIA GT 650M GPU with 2 GB VRAM
I am using Mercury Playback Engine with GPU Acceleration
The problem is that when doing anything with the video in PP at the same spot everytime the audio begins to play from the start (At 2:45 the audio begins to play from the start while the video continues to play as usual). this gives me audio that's 2:45 behind the clip. This occurs both in the source monitor and when I insert the clip into the time-line.
Not sure what a screen shot would reveal, everything looks just fine. No red lines when I first import, everything plays back in real time, the audio is simply off. This problem doesn't occur when playing back with any other program (I've tried windows media player, and just for fun played it back with Adobe Bridge and there was no problem with playback in either program.) This problem occurs both in the project I first noticed the problem in and when I import the footage into a new project.
Hopefully some of the info helps...
Has this happened to anyone else?

Can you help with this error message - Monitor Profile Dell E177FP G2.2 D65 appears to be defective?

I've recently started getting the message: "Monitor Profile Dell E177FP G2.2 D65 appears to be defective. Please rerun your monitor calibration software."
I don't know what to do to fix this, Can someone help?

Do a Google search on the exact error message. Others have had this problem and you might find a solution.

Help with connection of a monitor

I just bought a Sanyo monitor VMCL 1017 and connectet it Daisy chain.
_external drive 6pins to 6 pins computer ( I'm using a maxtor 1TB)
-External drive 6 pins to 4 pins camera
-camera s-video to s-video in monitor + cables for audio
I don't get any image from the computer, I get images and sound from the camera if I put a tape.
I'm wondering if I am missing something in the settings of the computer or??????
Thank you for any input you can give me.
Guy.

Hi Tom, thk you for your quick answer:
- camera is in VCR mode
- the application recognizes that the camera is attached
- view menu is set to:Canvas playback
I have here 6 options(2 + 4)
refresh video devices
toggle last (Grayed,n/a)
Canvas playback (checked)
Digital cinema desktop preview Main
Apple FW 720x480 ( was checked but not anymore
available grayed)
Apple FW Pal 720x576 (N/A grayed)
-No the canvas doesn't appear in in the camera view screen
Now to make sure all my connections were good, I capture some footage in a new project:
-worked good; the image appears on the monitor and on the camera view screen while capturing or replaying the footage from the ext HD; but when I went back to the view menu on my original project the options 2,5 and 6 were grayed even if the 5 was still checked but N/A, and what ever I try to check or unchecked nothing is changing.
I hope this will help you.
Thks again for your help.
Guy.

Help with Fan Speed/Temperature Monitoring - 875P Neo Series 2.0

Hi
My mobo manual doesn't explain the monitoring facilities available on this board and I would like confirmation of the following:
My P4 Northwood CPU Fan as supplied with P4 is connected to CFAN1 and provides monitoring of temperature and fan speed and also permits fan speed control.
My Northbridge Fan as supplied with mobo is connected to NBFAN1 and provides monitoring and control of fan speed. No temperature monitoring available.
My mobo provides monitoring of system temperature but doesn't say how this is measured and at what location.
There are two other 3-pin fan headers on the mobo; one is labelled SFAN1 with Gnd, +12V and the third pin NC and the other is labelled PFAN1 with Gnd, +12V and Sensor pins.
My new Antec 500W SmartPower 2.0 PSU has a monitoring cable that is wired with a black Gnd wire and a blue Sensor wire and, according to the Antec manual, is supposed to provide fan speed monitoring if connected to PFAN1 - I have tried this and get no information showing in either SpeedFan or Sandra. ???
My new Case fan, an Antec SmartCool, also has a monitoring cable but only has the third pin wired, presumably a sensor wire, and presumably could also be attached to PFAN1 instead of the PSU signal connector to provide fan speed monitoring. ??? Obviously I cannot connect both the PSU and Case Fan sensor cables to the mobo because the SFAN1 connection has no sensor pin connected; I presume this one is just a power supply to a fan as an alternative to using a supply line direct from the PSU.
Can anyone advise me on the correct use of the PFAN1 and SFAN1 connectors and what they are capable of.

- System temperature is measured at the Winbond W83627HF sensor chip located in front of your PCI slots.
- PFAN1 does indeed monitor PSU fan speed if the PSU has a fan speed reporting header. Not supported by some monitoring software (if Speedfan can't detect it, it doesn't support it. At least not until Alfredo's next revision).
- SFAN1 provides power only, no monitoring.
- Try a different monitoring software and see if it can detect the sensor monitoring your PFAN1. There are other monitoring software out there you can try, such as the CoreCenter that came with your motherboard, or Motherboard Monitor 5 or PCWizard (though you cannot adjust fan RPM through those programs).

Need Help with EEM script for monitoring Rx and Tx load on Link

Hello,
I'm trying to implement a script, which monitors the Tx and Rx Load on the Link and sends a syslog in case the load is exceeded 200 mark (i.e If Rx or Tx load > 200)
I have implemented the following script. But it is not giving the required results.
event manager applet test
event interface name Tunnel111 parameter rxload entry-val 200 entry-op gt entry-val-is-increment true poll-interval 5000
action 1.0 syslog msg "Increase Load On the Link"
I'm trying to monitor the load on Tunnel 111 which is mapped to WAN interface.
Router (Cisco 2821) has following IOS
c2800nm-advipservicesk9-mz.124-25g.bin

Hello Joseph,
As per your suggestion, we made some changes in our script and the following script is working fine. Its giving the required syslogs when the load is exceeded.
event manager applet test
event interface name Tunnel111 parameter txload entry-val 200 entry-op gt entry-val-is-increment false poll-interval 5
action 1.0 syslog msg "Increased Load On the Link"
Your prompt assistance is really appriciated.

Help with 4k 13 inch monitor

So I just got a spare laptop, which is this awesome ultrabook called the Lenova Yoga 2. It packs a 4k screen in a 13 inch space. Which is kind of incredible.. exept almost all of the adobe apps are useless because the menus etc don't scale up. Literally you cannot read a single thing. I think the only way you can see things is with a jewelers loupe.
The only suggestion ive seen so far is to use the "magnifier" app in windows 8... but it really is beyond bad. Is there any adobe solution or setting I can uses to make these things legible? literally all adobe programs are unusable

Noel Carboni wrote:
though you'll lose the advantage of being able to see the image in the native ultra-high pixel density of your display.
Just how much real world difference is there between 1k and 4k pixels on a 13 inch display? You'd see it with things like text, but it would need to be a very sharp photograph before you could take advantage of such high pixel density.
Or do they supply the above notebook with a pair of these?

[SOLVED] Help with systemd .service script

Hello,
I have been using ArchLinux (ARM version) on some “plug computers” for over a year and love it. Recently I forced myself to move to systemd by upgrading all my computers from scratch. I migrated all my applications and learned new ways of doing things but am having trouble with one last migration. I run a c++ communication program that monitors a TCP port for traffic. In the past I started this program (daemon) from an entry in rc.conf. I have read all I can about systemd’s new approach to starting daemons (https://wiki.archlinux.org/index.php/Systemd and https://wiki.archlinux.org/index.php/Systemd/Services)
So far I created what I thought is the correct systemd .service file listed below.
[Unit]
Description=EQBCS
After=network.target
[Service]
Type=simple
ExecStart=/home/public/EQBCS/eqbcs -p 12947 -d &> /dev/null
[Install]
WantedBy=multi-user.target
I put this file in /usr/lib/systemd/system/eqbcs.service. I then ran the following commands in the following order:
systemctl daemon-reload
systemctl enable eqbcs.service (created a link in /etc/systemd/system/multi-user.target.wants)
systemctl start eqbcs.service
Here is output from systemctl (status)
eqbcs.service loaded failed failed EQBCS
I thought this would start the service but no luck. I also thought maybe a reboot would work but no luck. I verified I can start the daemon manually if I run /home/public/EQBCS/eqbcs -p 12947 -d &> /dev/null from the command line.
I think I am close, but after several hours of looking at examples of .service files and other posts, I am at a loss. I am not one of those types who posts a question without taking the time to read the wealth of information on these boards, but I am truly out of ideas and can’t figure out what to do next. I sincerely could use some help/advice.
Last edited by calzon65 (2013-06-01 21:18:20)

Thank you for the suggestions, I believe I am getting closer to success. When I run systemctl start eqbcs.servcie it starts the service but the only way I can get out of systemctl is to ^c out.
Here is my current .service file:
[Unit]
Description=EQBCS
After=network.target
[Service]
ExecStart=/home/public/EQBCS/eqbcs -p 12947
Type=forking
[Install]
WantedBy=multi-user.target
Output from systemctl status eqbcs:
eqbcs.service - EQBCS
Loaded: loaded (/etc/systemd/system/eqbcs.service; enabled)
Active: failed (Result: timeout) since Sat 2013-06-01 12:48:43 PDT; 2min 11s ago
Process: 427 ExecStart=/home/public/EQBCS/eqbcs -p 12947 (code=killed, signal=TERM)
Main PID: 396 (code=killed, signal=KILL)
CGroup: name=systemd:/system/eqbcs.service
Jun 01 12:47:13 alarm systemd[1]: Starting EQBCS...
Jun 01 12:47:13 alarm eqbcs[427]: WARNING: Running as root NOT recommended.
Jun 01 12:47:13 alarm eqbcs[427]: EQ Box Chat Server 10.12.18
Jun 01 12:47:13 alarm eqbcs[427]: Waiting for connections on port: 12947...
Jun 01 12:48:43 alarm systemd[1]: eqbcs.service operation timed out. Terminating.
Jun 01 12:48:43 alarm systemd[1]: Failed to start EQBCS.
Jun 01 12:48:43 alarm systemd[1]: Unit eqbcs.service entered failed state.
Are there any other suggestions for settings in my .service file?

[SOLVED] Help with dual monitors (second monitor won't wake up)

Similar Messages

Maybe you are looking for