I made a free website using iweb and my host is dropbox but it is not showing in every search engine,i have to use a proxy for my site to pop up
i made a free website using iweb and my host is dropbox but it is not showing in every search engine,i have to use a proxy for my site to pop up
Possibly because dropbox is not really a proper webhost - it might be better if you went and signed up for proper web hosting from somewhere like http://www.godaddy.com or http://www.hostexcellence.com.
Have you told Google that you site exists? If not, then you need to do so - http://www.google.com/addurl.
Similar Messages
-
I bought a CD and it charged me for it and said it downloaded it but it's not showing up in my library...I tried to check for available downloads and it says it is all downloaded but the songs are not in my library
You must not post here because you have a portable. The problem is related to iTunes so you should post into the iTunes for Mac section and you may also have better luck in answers as iTunes specialist are there.
Cheers
Simon -
I have been receiving my 2 podcasts, rush limbaugh show and the hugh hewitt show however some reason the are not on my I tune site so I can download them to my Ipod. Any help would be great?
Hello blu monkey,
I found some resources that I think might help with the visibility of your IMAP email folders on your iPad and Mac.
On your iPad, you may need to follow the steps in this article to make sure your folders are visible:
iOS: If IMAP Mail folders are not visible
http://support.apple.com/kb/HT1393
On your Mac, I am not sure if you have the sidebar enabled, but you can enable it using the steps in the article below. When this is showing, you should see your email account listed near the bottom with a triangle next to it. When the triangle is pointing down, it should show your folders:
Mail (Mountain Lion): Show or hide the sidebar
http://support.apple.com/kb/PH11763
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I purchased a movie on apple tv. I then went to my pc and clicked "check for available downloads", but the movie is not there. I don't have enough storage to put the movie on icloud, and i refuse to pay for more storage to move something that i already paid for. any suggestions?
It looks like the answer is to log out of iTunes and then back in. That allowed Rentals to show up in my Movies Library. I rebooted about three times which didn't work. I closed the application and restarted it many times which didn't work.
The solution was to log out of my username and then back in. That worked.
iTunes Bug. -
Using Screen Exit AMPL0001 in TCode MP02 but fields are not showing.
Hello SAPients!
I created a project, added the enhancement AMPL0001, included some test fields in the subscreen, activated components and project but when I run the transaction where my custom fields are supposed to be shown this is not happening. None of my fields is displaying just the rest of fields that already were there.
I have reviewed what can be the differences between my fields and the others but I don't see any.
What am I missing?
Thanks in advance for your kind help.Hi Klaus,
Thanks for your reply. Yes, I'm sure, I have reviewed several times. Actuallly I deactivated and reactivated my project a couple of times before you mention, now I did it again and I get the same result.
A couple of questions:
Is it normal that the new fields I add to the subscreen are grayer than the rest of fields?
Is it normal that the status of the subscreen is shown as "Modified/Activated" instead of "Activated"?
Thank you. -
I've made several videos with my iPhone 4S. I transfered all to iTunes and then to my iPad 2. They appear on the "Videos" app on the iPad, but not on iMovie. What can I do to change this? I would like to use iMovie on the iPad to edit these videos.
I have found that a good way to get them to the pad camera roll is thru an app called photosync Transfers the videos Wireleesly to the pad. If you already have them in the camera roll, just fire up I movie, create a new project, and the will show up in the selection of clips in the upper left. Drag them into the movie pane and do your thing. You really don't need to visit I tunes unless you need to get them onto the pad via the way Fred has described.
-
Hi,
I will apprecite your help.
I find the copied file to time capsule though finder bt not when I open the pointer.
can anyone help?
RegardsNo I have not watched a video to move iTunes.
You are trying to convince me that the video is correct.. but you are having issues..
I tend to consider Apple's documentation superior .. not that they always get it right.
If it doesn't work we need more info.
Is this Mavericks?
Is the youtube video using Mavericks.. ?? If not then I suspect your problem is due to poor networking in Mavericks.
Ensure you follow the rules for SMB networking..
All names are short, no spaces and pure alphanumeric.
Try manually mounting the hard disk in Finder via Go, Connect to Server.. make sure the TC is mounted before you try to connect to the library.
You will have constant problems because the TC is unsuitable for iTunes. -
So, I'm trying to sync all my Jason Mraz to my iPhone. On iTunes, after I plug in my iPhone to my MacBookPro, on the iPhone tab I check the artist "Jason Mraz." I then sync my phone. I goes through the process then when I check the music library on my iPhone nothing shows up. I then try the same procedure with checking each individual album. Same thing. I tried turning the phone off and on to see if it would show up after I did that, and still nothing. Please help me!!
Un-sync all your music to remove it from the device, then restart (hold down the home button along with the sleep/wake button until you see the apple, then let go). Now re-sync your music.
-
When ever I click a photo with photo effect. Photo effect shows only in my iphone but it does not show in computer when ever I connect to laptop. So please resolve the problem.
That is how it works. You will need to email the photo to yourself in order to preserve the edits.
-
Firefox Version 22.0
Thanks for your attempted help. I went back to an earlier version of Firefox, which restored the Roboform toolbar. Then, when my automatic updater ran, the Roboform toolbar remained.
I like Firefox, but it is sometimes like a high-maintenance chick; very needy! -
I have made a website using iweb, as this will no longer be supported by apple, does that mean the gallery I have created on my website will no longer work even though I am hosting it with a different hosting provider. Will the other widgets no longer work?
There are a few things that won't work on other hosting sites; hit counters and pop-up slide shows for sure.
See http://oldtoadstutorials.net/No.iW11.html for more info, and/or the iWeb forum at https://discussions.apple.com/community/ilife/iweb -
I have developed a website using iWeb and it includes a blog page selected from stock pages in iWeb. I'm publishing it with GoDaddy and when I do that the interactive functions of the blog page don't work. (Adding comments and photos as well as searching). Is there any simple way to host this site somewhere so that those functions work?
No, because all those functions were MobileMe only and now that MobileMe has gone, they won't function any longer.
To enable these to function, you either need to add them yourself or change your blogging platform to something else such as WordPress etc., and create a link from iWeb to your WordPress blog or embed the blog page using iframe into your iWeb site.
Commenting systems such as Disqus or http://www.intensedebate.com work quite well. -
I had Snow Leopard and was using iWeb and Filezilla for my website (not MobileMe). Wanting to move to single-click publishing (supported by MobileMe), I now find it is not supported by iCloud and Mountain Lion. I feel cheated, having bought it mainly for this purpose! The other thing they don't tell you is that Mountain Lion disables OfficeMac, and I am considering uninstalling it for that reason - do I get my money back?!
You stated; "Mountain Lion disables OfficeMac"
That is not true.
Mountain Lion does not have Rosetta so it is not capable of executing PowerPC code. If you have MS Office 2004 that is coded in PowerPC code and will not run in Mountain Lion. What you need to do is upgrade to an Intel version of Office.
Allan -
I tried to implement photo albums using iweb and got a publishing error.
I tried to implement photo albums using iweb and got a publishing error. All was fine with my site until I added the photo album page. The software doesnt say what the error is exactly, only that it is a publishing error to my ftp
Exact message "There was an error communicating with the FTP server. Try again later, or check with your service provider."
If I reduce the albums inside to 1 then it seems to work but that takes away from the usefullness of multiple albums.
my iWeb version is 3.0.4 (601)Publish your site to a folder on your hard drive to see if the publication will proceed successfully and open the site locally with your browser to confirm all of the alums are there and work. If they do try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If you're still not able to publish from iWeb to your server download and use the free Cyberduck to upload your website files to the server. Users have found that CD has been successful when iWeb had problems.
OT -
I'm working to set up my website with iWeb and it won't let me import photos from iPhoto! Whats up?
I'm working to set up my website with iWeb and it won't let me import photos from iPhoto! Whats up?
Will Image capture (in your applications foldr) see them and bring to disk? If so then once they are safely off the memory card and on disk use the camera's format command to reformat the memory card
and can you impoprted to iPhtoo from disk? Will preview open the photos on disk?
LN
Maybe you are looking for
-
How to connect to a Remote Oracle Database
Hi Friends, The error I encountered while connecting to a remote database is ���DataSource name is too long String url="jdbc:odbc://abc:1523/test"; con = DriverManager.getConnection(url,"xyz","xyz1"); Here Remote Host-name = abc Port = 1523 DataSourc
-
Different view of the same query between users
Hi at all, I strongly hope you can help me. The problem that i have is that: I have a different view of a query inserted in a workbook respect the view of the same query that have other users. In particular I watch in my query 4 fixed characteristic
-
I have a bar chart that prints within a group. I want the title of the chart to be based on the group value <?for-each-group:ROWSET2_ROW;./GROUP_FIELD?> <?GROUP_FIELD?> Is this possible? Where do I set the Chart title so it displays on the top of eac
-
Iweb on Lion made my internet router crashes!
So I bought a brand new Lion 10.7.2 computer with of course no iweb on it. As far as I have the ilife 11 package, I reinstall ilfe and iweb was working correctly. Good. My problem starts when i decide to publish using FTP and my ftp provider obliges
-
Mac's ability to use Access database
I am considering buying an apple mac after many years using a PC. I currently use Access database and will need to continue to review access databases and support colleagues in offices where PC is the norm. Am I on a Mac able to view and use Microsof