I need a BLANK BOOK !

*Hi everyone .. New around here so please be gentle .....*
*I have searched everywhere within the iPad forum for a possible answer to what I hope is a simple question .. If I have posted in the wrong place , my apologies ...*
*Ok ... Sitting Comfortably ...? Here we go ..*
*As a Musician , I write and arrange a lot of music ..*
*So... Is there any way at all to get my multiple pages of sheet music into a ' blank book ' so I can utilise the iPads' " touch and turn the page feature" and not have to carry a car full of sheet music with me ?*
*Regards ,*
Mike

Personally I haven't used these but I've heard calibre is good:
http://calibre-ebook.com/
and a web based converter is http://www.epub2go.com/ if you don't mind uploading your files to them.
I have no idea how well these would convert sheet music to an epub file but I guess you can try it out and see if it's what you need.

Similar Messages

  • I need the blank DVD -R made by Apple Co.

    Bought Oct., 2003 iMAC G4 Dome, DVD burning is problem with another brand blank DVD-R....
    I used to burn with Apple Co. brand blank DVD when I use iDVD program and iphoto. I burned Apple brand blank DVD-R yesterday iDVD projects.
    But, now, I can not buy Apple Co. brand blank DVD-R anymore & anywhere...
    Until the last week, I burned Apple Co. brand blank DVD when I bought lots of blank DVD made by Apple Co. brand. Apple brand blank DVD -R was perfectly working with my iMAC G4.
    However, 3 days ago, I bought sony brand blank DVD -R, Verbatim brand DVD-R, Memorex DVD -R, Maxell DVD-R etc. , and I try to burn all brands of blank DVD -R...
    Even I'v shown my iMAC G4 to Apple store Garden State palza in Paramus, NJ, they did not found the problem. one of assistant in Apple store said, " buy New one..." This is not a solution , isn't it?
    I have no idea.
    Now, I need the blank DVD -R made by Apple Co.
    How can I do ? or Do you have any idea?
    My iMAC G4 was bought Oct. 2003 and use MAC OS X 10.2.8.
    tomorrow, I need to burn iDVD project in order to show my buyer.
    Help me......
    Message was edited by: raramiko
    iMac G4 Mac OS X (10.2.x) bought Oct.,2003

    At First, I try to do your first option,
    Verbatim brand DVD-R is not working.
    Next , you said,
    "Verbatim should have worked. Typically Apple branded discs are just repackaged Verbatims. One thing to note about that machine, a firmware update supported higher speed burn support DVDs:
    http://docs.info.apple.com/article.html?artnum=86130"
    -------- Pop up window said, "This update is not compatible with this model Macintosh"
    so, Let ms check this DVD Devices & volumes , it is ,
    CD-RW/DVD-R
    Disc Burning Fully supported.
    Unit Number 0
    ATA Device Type atapi
    Device Serial EA998D08
    Device Revision A43h
    Product Identification DVD RW DW-U10A
    Vendor Identification SONY
    The result is ... Mine is Sony brand.
    If that doesn't work, and your clock battery has been replaced in the last four years, zap your PRAM:
    Finally, if none of the above works, you may want to get an external Firewire burner from http://www.macsales.com/
    They have the full range of support from iDVD to other Apple applications, as well as booting.
    your last option is the last of my choices.
    Is that all?
    I have used power mac 6100-66 since 1994 that is still working in my studio, I love MAC, In My Studio, I have two Macs, One is Power Mac 6100-66av and iMAC G4 17" flat Dome.
    I have No Idea why my DVD -R Burning Broblem with others brnad blank DVD-R except Apple brand. and you company said, "Typically Apple branded discs are just repackaged Verbatims."
    But My DVD Burning is still problem with that Verbatim brands DVD-R.
    Really,if you take care of your future customer, Your company needs responsibility to even just, one customer's sound.
    Now, I have no solution except to buy external Firewire burner with my money.
    Now to Future, who can buy the MAC without the clear solution service in Apple Co.?

  • Why is my calendar look like a blank book?

    Why is my calendar look like a blank book?  The calendar format is not showing up just a blank book?

    Quit the calendar app and restart the iPad.
    Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    You can try this as well if quitting the app does not work.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • How do I get a refund for a book when I wanted the audio book? I bought both but only need the audio book..

    How do I get a refund for a book when I wanted the audio book? I bought both but only need the audio book. I don't even know how to use the book. The only reason that I bought it was it was cheaper and I thought that it was the audio book.

    There are no refunds.

  • Do I need a blank disc for bootcamp? Or could I use a Flash Drive?

    Do I need a blank disc for bootcamp? Or could I use a Flash Drive? Thanks

    Use the Boot Camp Assistant to create a CD or USB media to install the latest Boot Camp drivers for your computer. You should get the newest drivers available any time you install Boot Camp.
    Install Windows with an installation disc you provide or—on some Mac computers—with a USB flash drive that contains a Windows 7 ISO image downloaded from Microsoft. The Boot Camp Assistant helps you burn the image to the flash drive.

  • I need a font book factory reset & a clean slate

    My font book is is a mess!  I have duplicate fonts in about 4 different directories (my fault) and want a fresh start.  I did an "export" of my fonts but I am unsure how to do a factory reset.  I've read the Font Management in OS X doc but am unclear if clearing the cache will bring me back to just the basic system fonts or only clears the history.
    Do I need to go in and delete ("file ----> remove font") the fonts in font book one by one and THEN clear the cache before reinstalling the ones I want in the ONE directory folder where I want them to live?  (lesson learned).  I have 1200 (not including the duplicates) fonts that I need to sift through and am looking for the fastest way to do this without losing the key system fonts for Mac, Office 2011 and Adobe CS5 Creative Suite.
    Is that amount of installed fonts still manageable with font book or should I be looking at a different font management solultion?  I can't answer that for myself until I make it manageable with only ONE copy of each font   
    Thanks in advance for your help!  I promise that I've read through this site and have been googling all day but haven't been sure about resetting the it all back to square one 
    Tara

    There isn't an easy, singular answer to your question, though it would be fairly straightforward if it weren't for Office. I am curious how you arrived at 4 directories of fonts. There are only three Fonts folders OS X looks at. The ones in the System folder, the main Library folder, and the one in the active user account. Since you shouldn't even be looking in the System folder (if you don't know what you're doing), the only two places you should have any fonts you've added would be the main Library and your account.
    Anyway, start by launching Font Book. Delete any Font sets or Library sets you have created. Close Font Book. Create a new folder on the desktop. Call it "mine". Anything you want really, just so it refers to the fonts in your user account. Go to the Fonts folder in your user account and move all fonts out of that folder to the new one on the desktop. Create another new folder on the desktop named "lib". Open the /Library/Fonts/ folder and move all fonts into the second new folder. Both the /Library/Fonts/ folder, and the Fonts folder in your user account should be empty.
    Follow the instructions at the bottom of Font Management in OS X to restore all fonts from the Snow Leopard DVD. You will be using Pacifist to restore both the System and Library fonts. When you're done, your fonts will be back to the way the were when you first installed OS X.
    From the desktop folder you named "lib". Move Hoefler Text.ttc and STHeiti Medium.ttc to the /Library/Fonts/ folder. Replace the versions you just restored with these newer versions. They were updated in 10.6.5.
    Office 2011 installs many newer versions of fonts OS X comes with. Move these fonts from the 'lib" folder into the /Library/Fonts/ folder so you again replace the ones you just restored.
    Arial.ttf
    Arial Italic.ttf
    Arial Bold.ttf
    Arial Bold Italic.ttf
    Brush Script.ttf
    Times New Roman.ttf
    Times New Roman Italic.ttf
    Times New Roman Bold.ttf
    Times New Roman Bold Italic.ttf
    Verdana.ttf
    Verdana Italic.ttf
    Verdana Bold.ttf
    Verdana Bold Italic.ttf
    Wingdings.ttf
    Wingdings 2.ttf
    Wingdings 3.ttf
    Here's where it gets a bit trickier. Office 2011 also installs a number of old fonts which conflict with the newer .ttf OpenType fonts. Delete these from the "lib" folder on your desktop. Note that they do not have a file extension.
    Andale Mono
    Arial Black
    Arial Narrow
    Arial Rounded Bold
    Comic Sans MS
    Georgia
    Impact
    Tahoma
    Trebuchet MS
    Without being able to see what you have left in the "lib" folder, I can't easily say what you can move back into the /Library/Fonts/ folder. So I'll list everything else Office 2011 installs that you can move back in. Office uses many of these for its supplied templates. Cambria is the default font family for Word.
    Abadi MT Condensed Extra Bold
    Abadi MT Condensed Light
    Baskerville Old Face
    Batang.ttf
    Bauhaus 93
    Bell MT
    Bernard MT Condensed
    Book Antiqua
    Bookman Old Style
    Bookshelf Symbol 7.ttf
    Braggadocio
    Britannic Bold
    Calibri Bold Italic.ttf
    Calibri Bold.ttf
    Calibri Italic.ttf
    Calibri.ttf
    Calisto MT
    Cambria Bold Italic.ttf
    Cambria Bold.ttf
    Cambria Italic.ttf
    Cambria Math.ttf
    Cambria.ttf
    Candara Bold Italic.ttf
    Candara Bold.ttf
    Candara Italic.ttf
    Candara.ttf
    Century
    Century Gothic
    Century Schoolbook
    Colonna
    Consolas Bold Italic.ttf
    Consolas Bold.ttf
    Consolas Italic.ttf
    Consolas.ttf
    Constantia Bold Italic.ttf
    Constantia Bold.ttf
    Constantia Italic.ttf
    Constantia.ttf
    Cooper Black
    Copperplate Gothic Bold
    Copperplate Gothic Light
    Corbel Bold Italic.ttf
    Corbel Bold.ttf
    Corbel Italic.ttf
    Corbel.ttf
    Curlz MT
    Desdemona
    Edwardian Script ITC
    Engravers MT
    Eurostile
    Footlight Light
    Franklin Gothic Book Italic.ttf
    Franklin Gothic Book.ttf
    Franklin Gothic Medium Italic.ttf
    Franklin Gothic Medium.ttf
    Gabriola.ttf
    Garamond
    Gill Sans MT Bold Italic.ttf
    Gill Sans MT Bold.ttf
    Gill Sans MT Italic.ttf
    Gill Sans MT.ttf
    Gill Sans Ultra Bold
    Gloucester MT Extra Condensed
    Goudy Old Style
    Gulim.ttf
    Haettenschweiler
    Harrington
    Imprint MT Shadow
    Kino
    Lucida Blackletter
    Lucida Bright
    Lucida Calligraphy
    Lucida Console.ttf
    Lucida Fax
    Lucida Handwriting
    Lucida Sans
    Lucida Sans Typewriter
    Lucida Sans Unicode.ttf
    Marlett.ttf
    Matura Script Capitals
    Meiryo Bold Italic.ttf
    Meiryo Bold.ttf
    Meiryo Italic.ttf
    Meiryo.ttf
    Mistral
    Modern No. 20
    Monotype Corsiva
    Monotype Sorts
    MS Gothic.ttf
    MS Mincho.ttf
    MS PGothic.ttf
    MS PMincho.ttf
    MS Reference Sans Serif.ttf
    MS Reference Specialty.ttf
    MT Extra
    News Gothic MT
    Onyx
    Palatino Linotype Bold Italic.ttf
    Palatino Linotype Bold.ttf
    Palatino Linotype Italic.ttf
    Palatino Linotype.ttf
    Perpetua Bold Italic.ttf
    Perpetua Bold.ttf
    Perpetua Italic.ttf
    Perpetua Titling MT
    Perpetua.ttf
    Playbill
    PMingLiU.ttf
    Rockwell
    Rockwell Extra Bold
    SimSun.ttf
    Stencil
    Tw Cen MT Bold Italic.ttf
    Tw Cen MT Bold.ttf
    Tw Cen MT Italic.ttf
    Tw Cen MT.ttf
    Wide Latin
    Anything you have left in the "lib" folder on your desktop will either be duplicates, or fonts installed by other third party apps. That will essentially be true of any fonts you moved out of your user account. I can't tell you which, if any of these, would need to be moved back in. For now, combine the two into a single folder and store them away anywhere not in any of the three Fonts on the hard drive. There will be a bunch of them as CS5 installs a slew of fonts. None of which it needs to operate.
    That's as far as I can help with the fonts themselves.
    Now open Disk Utility and run a Repair Permissions on your startup drive. Moving the fonts around will cause them to have permissions OS X doesn't like. Mainly just because you moved them back into the /Library/Fonts/ folder and it will want to change the permissions to OS X as the owner simply because of where they are.
    Last few things to do.
    Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
    OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
    Next to take care of the System's font cache files.
    Close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
    sudo atsutil databases -remove
    Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
    This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.
    Last step when back at the desktop. Launch Font Book so it can create a new database based on the fonts currently in the drive's three Fonts folders.
    There should be no duplicates. Everything OS X and Office installs will be available.

  • Why do I keep getting error message from Digital Editions when trying to open it. Keeps telling me that it has encountered a problem and needs to close. I need this apparently to download a text book fro Proquest - need the text book for Uni work what giv

    Why do I keep getting an error message from Digital Editions saying that it has encountered a problem and needs to close. I need this programme to download a text book from Proquest for University work what gives????

    You are using ADE on Windows or Mac ? and their versions ??
    Please restart your machine and try once again.
    Thanks

  • Acrobat 9 Pro: Order Form, need SUM=blank? and not $0.00 (HELP!!!)

    I know this might be an easy question for people with javascript knowledge.... but I can't get this working... please help!
    I need Order Form total field (sum) to default to blank (instead of $0.00).
    *example: Under >calculate I am using "simplified field notation" and (Qty1)*7.95 -- sum appears in "total 1"
         The unit price is $7.95 - The value of Qty1 = total 1 (calculations are working fine)
         Currently all total boxes read as $0.00 --- I need SUM to be blank until a customer selects a quantity
    How can I make the SUM default to blank? and NOT $0.00 - Is it a validation script??? If so, please help with code!!!
    Help is appreciated - Thanks!
    PS - SUM fields can't be set as non-printing, because Shipping Dept./Accounting Dept. needs ability to print and view totals (if amount is selected - otherwise it could be blank).
    *** SUM fields need to be blank for customers who print form and manually enter data & totals...
    I am using a Mac, and Adobe Acrobat 9 Pro

    I appreciate the reply... (it's been many hours without one)
    I tried the validation script, and as you indicated, the only way the total field (with the validation script) appears blank is AFTER the Reset button is clicked. (However I have not checked this in a reader)
    I can't see how I can make it work in that manner. Customer inputs Billing & Delivery Addresses at top, then proceeds to select products. If the reset button has to be pressed, all the data (ie. addresses) are removed.
    If there was a way to apply the reset function automatically at the opening of the pdf doc. then it would achieve the result I need. I wonder if there isn't a way with a check box at the top that customer clicks which would apply the reset function.
    If you (or anyone) has any further tips or help I would appreciate it. This is the last item the client has requested for change.
    PS. In case anyone can think of a print script to use... The sum value, when =0 (no qty) needs to print blank sum fields (not $0.00) BUT if there is a sum value, the amount must print (for Ship/Acct Depts)
    *** I just thought of something... The only time where the sum value needs to be blank is when customer prints and inputs data by hand.... so, would there be a way to add a print button that can also clear the sum values at the same time with the "reset" function and the validation script???

  • I NEED ADOBE WORK BOOKS FOR CS5 TRAINING CLASSROOM IN A BOOK

    I am studying Adobe CS5. I need work books for ActionScriptt 3.0 for Adobe Professional CS5,Adobe Flash Professional,Adobe After Effects CS5,Adobe Photoshop CS5,Adobe INDesign, CS5, Adobe Flash Catalyst CS5,  Adobe Fireworks CS5,Adobe Illustrator CS5,,Adobe Dreamweaver CS5, Adobe Premiere Pro CS5 I have completed all the Adobe Training Manuals. I need work books for more training. Where can I Buy The Books?
    [email protected]

    You can buy Classroom in a Book for CS5 products at Adobe Press.
    Find some examples here:
    http://www.adobepress.com/search/index.asp?page=1&query=cs5&showResults=Store&searchagain= Search+Again&subject=Adobe+Aft…

  • Help needed with iphoto book

    I am putting together a photobook.  When I format it for 8'x10 hardcover some of the photos come up with a warning of low resolution.  Is there anyway to preview how the pictures will print so I can figure if they are acceptable?  Is there anything I can do to increase the resolutions on the photos? Any help would be appreciated.

    No and no
    you can not preview the print quality of a printed piece on a computer screen since the resolutions are totally different
    and you can not "increase" the respolution of a photo - just like you can not change an out of focus photo - some software like Photoshop and elements can "increase the resolution by creating new pixels that are created by splitting the difference between the two pixels on each side thereby reducing pixelzation but it does not increase quality - in face it reduces it
    Books need a minimum of 180 DPI so for an 8x10 print you need a photo that is at least 1440x1800
    I have printed lower resolution when I really wanted the photo and the results have been ok but certinly not of the quality that photos with adaquate resolution have
    LN

  • Need Code for book publishing in BPC

    Does anyone have any VBA code for generating multiple report tabs?  This would take the place of book publishing since I do not want to create PDFs or HTML reports, but rather spreadsheets.

    I am just noticing this -   did you resolve your issue?   You basically need to write the code.
    Edited by: Deborah Silverman on Mar 16, 2009 7:30 PM

  • Does write to measuremen​t file need a blank file?

    Do we need to supply a blank file to write to measurement file? I am supplying a file with some text headers in it to my Write to measurement file, and for some reason it generates Error 100, saying that it is "not a path". I am not sure, if I need to supply a blank file or not. Also, is it possible to get rid of the headers that write to measurement VI itself generates in the file, and supply my own headers instead?
    Thanks.

    Please stick to your original post, where you are already being helped on this issue.

  • Blank book pages on iPad

    I am trouble with downloaded books having all blank pages. For example, in the folder on my desktop it shows that there is a 2.8mb pdf, an 848kb mobi file, and an epub file. I added it to itunes and synced it to my iPad. The cover of the book shows up, but all the pages are blank.

    I am trouble with downloaded books having all blank pages.
    From what source(s) did you download the file(s), which file did you sync to which reader app, how did you sync it, and are you still really using OS X v10.5.7 which is not supposed to be compatible?

  • Need help with Book features

    I have quite a bit of text in several Word documents, and am ready to assemble them into chapters in InDesign with a .indb (book) file.  Because of style sourcing, I don't know what to do first, and can't find anything in Help about it.
    Do I create separate .indd files first, insert the text from Word and then link all the files to .indb?  OR
    Do I create a series of empty .indd files and link them with .indb, then (I don't know where) synchronize styles in all of them >before< adding text?  OR
    Do I create and stylize just one chapter, which then becomes the stylistic model for all the other chapters?
    Do I even need to use .indb?  My book is going to be about 200 pages, and I am the only person working on it.
    I am eager to get going on designing my book, just not sure where to begin to do it.  I >think< I understand the .indb concept.

    Hi Peter,
    Thanks for answering my question.
    I had a LOT of trouble figuring out last night how to post in the forums at
    all (I'd also forgotten my IDs, which didn't help), so I was relieved just
    to get into >any< InDesign forum!  The system wouldn't let me into the plain
    old InDesign forum (who knows why?), but >would< let me into Feature
    Requests.  And I decided that I was requesting information about a feature,
    so no problem (sort of).  Anyway, the Adobe forums are not very intuitive
    like some others I post on.  Many times the login wouldn't tell me I'd
    gotten something wrong and would just bring up the home page again.  It took
    way too long to figure out what was going on, and then I had to figure out
    how to post once I got to the forum.  The last time I posted was a few years
    ago, and it was just as tough then, so I wasn't relishing going through all
    of that trouble again.  It was trouble.
    Thanks again for your help,
    ceilr

  • Re Photo Books – Elements 12 brilliant and serves all my need except Photo Books. Do I need to Buy the full version of Lightroom 5 to use the Photo Book facility?

    Re Photo Books. Hi I have an old full version of Photoshop 6 and Elements 12. Elements 12 serves pretty well all my editing needs. It has a Photo Book facility but the Template is not brilliant eg It is clumsy adding captions. I have been looking at Lightroom 5 which seems to have a great Photo Book facility but do I have to Buy the full Light Room 5 programme to use it? If so, what is the cost?

    Hi DJ,
    Many thanks for your comments on the Adobe Forum about Photoshop for
    Photo Books..
    Following your suggestion, I have had a look at Blurb and it seems
    pretty good and  quite easy to use. Many thanks for this suggestion. I
    have had a look around and I find there are many "publishers" and
    although Blurb comes out well in many reviews, there are many others
    also. But there is one big problem for me - they ALL produce BOUND Photo
    Books but I want a flexible Photo Book where I can later add or change
    pages! Nobody I have found produces a book where pages can be printed
    separately to be added when and where required in a book!
    I have posted another question in the Forum asking if anyone knows of
    such a publisher - especially in the UK, where I live.
    The reason I want the ability to insert pages etc is for a number of
    reasons. For example, I am producing an historical Photo Book but if
    friends send me photos of a past era, I want to scan the photos, put
    them on a separate page and then insert that page in the appropriate era
    in my book or I may later want to enlarge an old photograph already in
    the book and insert the enlargement next to the original etc. etc.
    I have printed some pages myself using Photoshop Elements, which was not
    the ideal tool as I mentioned before, but when the A4 pages were placed
    in clear plastic A4 pockets and inserted in my smart presentation Ring
    Binder, the result looked brilliant. But I have hundreds of photographs
    and I dread to think what the cost of ink would be if I printed them all
    myself, let alone the time!
    But I am beginning to think I may after all have to print them myself
    and that, as I have several hundred or more, the cost of buying
    Lightroom 5 may be worth it in the long run.
    Anyway, thanks for coming back to me with your views regarding my
    original enquiry.
    With very best wishes,
    Tony

Maybe you are looking for