I need C source code to capture with NI1424. Camera Megaplus ES310T

There is no problem using Labview capturing frames. But i need to capture frames using C Builder. I would be greatfull if you supply me with source code or dll.

If you still need it, you can download NI-IMAQ 2.5.1 from the following link: All Versions - Vision.
I ran the installer for NI-IMAQ 2.5.1, and Borland C++ support is one of the options that shows up in the feature selection step of the installation. In order to program in Borland, make sure this option is selected. I also noticed that no Borland example programs are included with the driver.
Your best option is to install support for Microsoft Visual C++ as well, and to take a look at how those examples were written. They should show up in the "sample" directory once installed. Unfortunately, Borland
is not supported by the current version of IMAQ. I searched for other examples online, but did not find any.
The library file for Borland can be found in the "C:\Program Files\National Instruments\NI-IMAQ\Lib\Borland" directory. This file will be needed when programming with Borland. Please refer to the NI-IMAQ User Manual and NI-IMAQ Function Reference for more information.
Best Regards,
Jesse D.
Applications Engineer
National Instruments

Similar Messages

Need sample source code for calling stored procedure in Oracle

Hi.
I try to call stored procedure in oracle using JCA JDBC.
Anybody have sample source code for that ?
Regards, Arnold.

Thank you very much for a very quick reply. It worked, but I have an extended problem for which I would like to have a solution. Thank you very much in advance for your help. The problem is described below.
I have the Procedure defined as below in the SFCS1 package body
Procedure Company_Selection(O_Cursor IN OUT T_Cursor)
BEGIN
Open O_Cursor FOR
SELECT CompanyId, CompanyName
FROM Company
WHERE CompanyProvince IN ('AL','AK');
END Company_Selection;
In the Oracle Forms, I have a datablock based on the above stored procedure. When I execute the form and from the menu if I click on Execute Query the data block gets filled up with data (The datablock is configured to display 10 items as a tabular form).
At this point in time, I want to automate the process of displaying the data, hence I created a button and from there I want to call this stored procedure. So, in the button trigger I have the following statements
DECLARE
A SFCS1.T_Cursor;
BEGIN
SFCS1.Company_Selection(A);
go_Block ('Block36');
The cursor goes to the corresponding block, but does not display any data. Can you tell me how to get the data displayed. In the future versions, I'm planning to put variables in the WHERE clause.

** RFC to JDBC scenario - Need not source code - Correct ?

Hi Friends,
I am doing RFC to JDBC scenario. It is a synchronous scenario. I think it is need not required to write any code in the source code tab of RFC. Is it correct ...? (Only Import and Export parameters are enough.)
Kindly reply, friends.
Kind Regards,
Jeg P.

Hi,
RFC needs only configuration and we will call remote method in R/3. Actual logic present in R/3.
Thanks,
RamuV

Need Sample source code for Forum in jsp

Hi..
Please tell me the website which is having the sample source code for simple forum... I have to implement it into my project... kindly help me out...
thanx in advance
kumar

Hi..
Please tell me the website which is having the sample source code for simple forum... I have to implement it into my project... kindly help me out...
thanx in advance
kumar

NEED a java coder to help with a script for a programs of mine.

I play a game, very competitively, and need someone to make and compile a script for me. I am willing to pay upwards of 100 USD for this script made to MY standards. There will be a lot of work involved...Probably 12 hours studying my game and the purpose of the script(s). I will be buying 2-3 scripts, at roughly 50-100 USD each, depending on the quality. I will transfer the money via paypal, or other means if we can reach an agreement.
Please IM me at Chadtrapier on AIM or send an email to [email protected]
Or...Add me on MSN - [email protected]
We can reach an agreement with these scripts...
Thank you, I will also check this thread, so reply if you would like.
~Chad

Ummm. Do you think that's a lot of money or something? Think in the range of 40-60 per hour. And if you're talking about warcraft I don't think they java hooks to make bots. I think you need to figure out what your problem is first and maybe learn to code them yourself.

RE: Using a source code control system with...

Hi Khanh,
In regards to your compile error...
We found that an interesting difference between versions 2.0.D.x and 2.0.E.x
was with the first line of an exported .CEX file.
A la ...
2.0.D line 1: begin;
2.0.E line 1: begin CLASS;
It caught me out. Just insert or remove the word CLASS using a text editor
depending on your version of Forte.
As for version control, we have been retaining workspace export files
(wascally WEX files!) as backups and plan to make greater use of Baselining in
the repository. In terms of securing our environment, this approach
essentially meets our needs.
Shane Howlett
The Hydro.

Thanks for your help. That works.
-khanh
At 11:20 AM 11/14/96 -0800, you wrote:
>
Hi Mike,
Thanks for the reply. I think that was what I did.
Below is my fscript input file:
setWorkspace ktCheckBoard
open
findproj sample1
cd c:\forte_cs\install\bin
compile sample1_sysadm.cex
importplan sample1_sysadm.cex (It failed at this step)'importplan' is unnecessary: 'compile' has compiled the .cex file into your
project. importplan is failing beacuse it expects to see an entire plan.
Mike
Mike Schilling ([email protected])
Forte Software, Inc.

Need Data source for Table MARD with field LABST

Hi,
I am having field LABST from Table MARD.Can you just tell me from which data source This field exists.

Check this thread :
How to get the field from extract structure to datasource
Regards
Kiran Sure

Live Capture with a camera via firewire and usb audio interface

I am trying to do a live capture through Final Cut 7.
I want the video feed through the firewire from my HVX200 and the audio feed from a 4 channel usb audio interface (Alesis iO4).
When I have both audio and video input coming in from the HVX200, the live capture works fine.
However, when I change the audio input so that it is coming from the usb audio interface, final cut has an error message saying "Video is not available."
During the preview, I see the video clearly and am getting levels from the iO4.
But when I try to capture, I get the error message.
Is it a processor issue (I've attached my specs below) with problems handling 2 separate inputs?
I'm not quite sure what the problem is.
Any input is greatly appreciated.
Thanks!
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,3
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.66 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          4 GB
Bus Speed:          1.07 GHz

Hi MtD,
Yes I am changing the Capture preset to iO4. Once that happens, it lets me run both the camera and the iO4 into the laptop but then an error message pops up the moment I try to capture it.
I was only trying to use 3 out of the 4 channels of the iO4.
Thanks!

Simultaneous Capture with many cameras

I need to capture video from many cameras simultaneously. I need to handle up to 32 cameras. I would like to use the pci1411 boards and capture rgb32 ntsc video (30fps). I need to capture about 10 seconds worth of video, storing each image into an array of imaqimages and be able to replay it after (individually). My question is how many boards can I run at the same time on a pci bus, transferring each frame to an imaqimage array? My guess would be 4 capture cards and about 2gb of system memory per computer (8 computers). I figured 1mb per frame, 30 fps, and four cards = 130mb/sec, and 10 seconds worth = 1.3 gigs. Am I on the right track? What kind of computers should I run this on (p4, zeon)? Can I use more capture cards per computer
? Is there a better way to do this?
Thank you
-Dave

Dave,
If you are acquiring 4 640x480 images simultaneously at the rates you mention, you will be tranferring 140 MB/s. This will exceed the limits of the PCI bus even if there is no other traffic on the bus, which is unlikely.
Is there a way you can reduce the amount of data you need to acquire? Does it have to be color? Does it have to be 30 fps? Does it have to be a full 640x480? If you can reduce any of these, it will make your job a lot easier and more cost effective. Otherwise, you will only be able to put two or three cards in each computer.
I don't think the type or speed of the CPU will be a major factor here, unless you are processing the images at some point. If you are just using the computer as a fancy VCR, you just need to worry ab
out PCI bandwidth and memory to store it. You will probably want a SCXI disk drive if you are going to save all these images to disk. A RAID system might be effective also.
Bruce
Bruce Ammons
Ammons Engineering

I have source code

Hi guys, I am a student of enginering. I am doing the project to finish. I need some source code to show images from a webcam to an applet in the client�s browser using JMF. When client press a button in my GUI it should be show a frame with the images from the webcam.
If somebody wants to send me some information about this my e-mail is: [email protected]
Thank you and sorry for my bad english.

See this text of VLC forum:
First let me say hello to you all and express how grateful and thankful I am that a great player VLC and a wnderful community (you) exists!
I have a simple goal.. well maybe now too simple. My goal is to capture tv program and right away stream it on the internet. I have a decent PC, am planning on buying a tv tuner and have been thinking about how I will be able to achieve my goal. Does anyone know if VLC can have tv tuner as a capture device? Is there an article, or perhaps a tutorial that you know of which I could read?
I am also wondering, how would I be able to stream video to the internet, so that people can see it in the browser window? like windows media player plugin?
thank you very much in advance!!!
Back to top
Guest
Posted: Sat Jan 21, 2006 6:54 am Post subject: Yes you can
I am doing what you are wanting with a Leadtec TV2000 express. You should have no problems. Use DirectShow tab. Select your Tv tuner. Select Stream output.. Select MMSH and give it a port. I use Asf for encapsulation and div3 for video mp3 for audio. It's not to bad on my 1.7 gig intel.. about 40% cpu usage. Now all you have to do is type mms://(IP):(port) from start and run.
Back to top
Spilo101
Guest
Posted: Sat Jan 21, 2006 3:36 pm Post subject:
Thank you very much for yor reply! I realy appreciate you helping me out.
Do you know how I would stream several video streams simultaneously? I want to stream several at the same time.. thank you.

How to release top-level VI (only) source code?

Hello,
I am developing an addon to an application I already have. The application is large (over 1,500 VI's) and the VIs are set up to compile with mostly default settings (there's a top-level VI, a few with Front Panel visible, most of them are not visible).
The customer wants the source code to the work I'm going to do, and it's going to use many existing sub-VI's. The addon itself will be a sub-VI (I have a Main.vi that basically opens 'screens', and this is a new screen). The existing sub-VI's basically do the data collection and processing, and the new code will do some additional processing and have a nice GUI to the existing code. The customer wants the source so they can make modifications as needed.
Is there any easy way to provide just the source for the top-level VI? Basically, I want to give them M.vi, where M.vi calls n.vi, o.vi... etc, but o-z.vi need to remain closed-source. Also, M.vi is called by Main.vi, which opens screens A-M.vi
One option is do copy the entire application, then open every sub-VI and save it without Source Code. But with so many files, this seems like a bad idea. I also then have to maintain two applications.
Any good ideas out there? It seems so easy in other languages (use object files) that it seems like there should be a solution here I'm not seeing.... Thanks!
Message Edited by rnelsonee on 06-02-2010 08:28 AM
Message Edited by rnelsonee on 06-02-2010 08:31 AM
Solved!
Go to Solution.

Dont know if this is the best solution for you, but you can create a "virtual folder" in the LabVIEW project with all the sub-VIs that you want to keep closed-source. Then create Source Distribution build specifications in the project and remove the block diagrams assign passwords to all VIs in the virtual folder. See attached pics.
Attachments:
Project.JPG ‏23 KB
SrcDist.JPG ‏62 KB

Source Code of SDO_UTIL.GETVERTICES()

Hi,
where can I find the source code of the aforementioned function? I'm especially interested in the way it gives back the output. I mean how works it together with the table statement. Example:
SELECT col1, t.X, t.Y
FROM table(SDO_UTIL.GETVERTICES(col2)) t;
How does this work? I need to emulate the behavior on a 8.1.7 because the function belongs to spatial option since the 9.2 release.
regards
Marco

Marco,
Here is the code for it. Note that, this still does not handle all the cases like optimized rectangles, etc.
You need to add code to deal with that.
Also, this uses sdo_geometry member function get_dims to find the dimensions of the geometry.
You need to write code to deal with it in 817 differently as there is not get_dims function in 817.
You need these types first:
drop type vertex_set_type;
drop type vertex_type;
Create type vertex_type as object
(X number,
Y number,
Z number,
W number,
ID number );
create type vertex_set_type as TABLE of vertex_type;
grant execute on vertex_type to public;
grant execute on vertex_set_type to public;
FUNCTION GetVertices(geometry mdsys.sdo_geometry)
RETURN vertex_set_type IS
i number;
dims number;
coords number;
result vertex_set_type;
dim mdsys.sdo_dim_array;
is_zero boolean;
etype number;
begin
result := vertex_set_type();
-- handle the POINT case here
if (geometry.sdo_ordinates is NULL) then
result.extend;
result(1) := vertex_type(geometry.sdo_point.x, geometry.sdo_point.y,
geometry.sdo_point.z,NULL,1);
return result;
end if;
-- all other cases here
coords := geometry.sdo_ordinates.count;
dims := geometry.get_dims;
if (dims = 0) then
return result;
end if;
coords := coords/dims;
FOR i in 0 .. coords-1 Loop
result.extend;
if (dims = 2) then
result(i+1) := vertex_type(geometry.sdo_ordinates(2*i+1),
geometry.sdo_ordinates(2*i+2), NULL,NULL,i+1);
elsif (dims = 3) then
result(i+1) := vertex_type(geometry.sdo_ordinates(3*i+1),
geometry.sdo_ordinates(3*i+2),
geometry.sdo_ordinates(3*i+3) ,NULL,i+1);
elsif (dims = 4) then
result(i+1) := vertex_type(geometry.sdo_ordinates(4*i+1),
geometry.sdo_ordinates(4*i+2),
geometry.sdo_ordinates(4*i+3),
geometry.sdo_ordinates(4*i+4), i+1);
end if;
END LOOP;
return result;
end;

How to get Source code of a Schedular Java concurrent program in Payments

Hi Experts,
I am very new to Java Concurrent program.
I need java source code of a schedule java concurrent program.Following are the details of Executable.
Executable :Format Payment Instructions
Short Name :IBY_FD_PAYMENT_FORMAT
Application : Payments
Execution Method :Java Concurrent Program
Execution File Name:FDExtractAndFormatting
Execution File Path : oracle.apps.iby.scheduler
I searched in execution file path,but i am unable to find required java source.
Please someone help regarding this issue..
It's Urgent Issue.
Regards
Amar

Hi Srini,
Thanks for reply...
In the attached template of concurrent program "Format Payment Instructions", i need to add voucher number in the template.
How can i do this?how to decompile the executable?
It is a check printing.
Please give me suggestions..
Regards
Amar

Tools.jar Source Code

Hello
I am working on Multi Rebinding and Component mobility in a component programming framework.I need the source code of Tools.jar from where i can download the code of tools.jar. I have download the the Java SE 6 source code but i need the code of tools.jar

It's in the SCSL source code, but why do you think you need it?
And you don't need tools.jar at all for RMI.

Java source code to compare XML based on ExamXML XML diff tool

I’m working on a project that includes comparing XML files and I need a source code on Java to compare XML fragments.
I’m using ExamXML from http://www.a7soft.com to compare XML files but I need the Java source code.
Can anybody help me.

You didn't notice there's a "Support" link on that page you referred to? Ask them for the source code. If they won't give it to you, then you are effectively asking us to give you a stolen copy of it. Don't ask for such things on this site.

I need C source code to capture with NI1424. Camera Megaplus ES310T

Similar Messages

Maybe you are looking for