I need confirmation on WVC2300 pinout for door lock.

I would like to use I/O buttons on WVC2300 interface to control electronic door lock. The schematic and explanation of how to use the I/O to control appliances is a bit sketchy. Does this camera offer 12V 100ma switched from pin 4 to 7 or 2 (GND) and/or pin 6 to 7 or 2 (GND)?
Thanks!

Hi Pradeep:
SAP GUI for Windows - If you create an transaction iview and select SAP GUI for WIndows -- then the GUI needs to be locally installed (there is another way to do it...where you network install the GUI I havent done this anytime though). There wont be any automatic installation, the GUI needs to be preinstalled.
SAP GUI for Java (JavaGui) - The primary objective of this GUI type is for *UX environments. However if you have the Sun Java plug-in it will work on windows also.
Please close the thread if your query has been resolved
Thanks,
GLM
Edited by: GLM on Aug 7, 2008 7:14 AM

Similar Messages

Need confirmation for [javaws.exe -uninstall]

Hi,
I need confirmation from the users before to uninstall the application.
But by this way I am not getting any confirmation before uninstall the application.
Eg : javaws.exe -uninstall URI<jnlp cache location>
( javaws.exe -uninstall "D:\Documents and Settings\sarayu\Application Data\Sun\Java\Deployment\cache\javaws\http\Dlocalhost\P8080\Tool\AMstartup.jar"
Thanks,
Sarayu.

As Kent mentioned you need to create seperate package for this KB and then advertise that with uninstall program.
There is a blog post re: the same (I've not tried it). May be you can give try?
http://trevorsullivan.net/2011/05/31/powershell-removing-software-updates-from-windows/
Anoop C Nair - Twitter @anoopmannur
MY BLOG:
http://anoopmannur.wordpress.com
SCCM Professionals
This posting is provided AS-IS with no warranties/guarantees and confers no rights.

Need front USB Pinout for ms-6380

i cant find the front usb pinout for my model of motherboard. I am also wondering if my motherboard has pinouts for front audio sound like mic and speaker out

then you have to translate the picture to english to see it correctly

Stop Automatic creation and confirmation of Transafer Order for a doc type

Hello All,
There is a requirement that I need to stop Automatic creation and confirmation of Transafer Order for a particular document type.
The issue is that sometimes the cycle goes upto creation of Invoice automatically but sometimes this does not happen. More over the user wants that the transafer order needs to be confirmed manually.
Can u please provide the .steps involved for thie case.
Thanks
Chandrashekhar

Dear Steve,
Thanks a lot for giving reply with what I need to do, but I am unable to see result.
I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
Click on Assign button,
Press on New entries
WhN = 900
Reference Movement Type = 101
Movement indicator = B
Movement type for Whse Mgmt = 101
TR create Transfer Requirement = X
Immed.TO Creation
Mail confirmation for background processing = 01.
GR date = 2

DO i need some extra hardware interface for receving both Audio and video

hi i m doing e-learning project. i have to capture video from webcam and voice from headphone and send to client.
but my code is working fine for either one at a time.
DO i need some extra hardware interface for receving both Audio and video. im using code AVTransmit and AVReceive found from this site only
After running TX
i give Dsound:// & vfw://0 in Media Locater only sound is received and no vedio
and when i give vfw://0 in Media Locater only live video is transmited.
im using JMF1.1.2e.
if any one know the method to run or cause of it plz reply me soon. i will be very thankfull
transmiter/server side code .first run TX on server
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import java.net.*;
import java.util.*;
import javax.media.rtp.*;
import javax.swing.*;
import javax.swing.event.*;
import javax.swing.border.*;
public class Tx extends JFrame implements ActionListener, KeyListener,
MouseListener, WindowListener {
Vector targets;
JList list;
JButton startXmit;
JButton rtcp;
JButton update;
JButton expiration;
JButton statistics;
JButton addTarget;
JButton removeTarget;
JTextField tf_remote_address;
JTextField tf_remote_data_port;
JTextField tf_media_file;
JTextField tf_data_port;
TargetListModel listModel;
AVTransmitter avTransmitter;
RTCPViewer rtcpViewer;
JCheckBox cb_loop;
Config config;
public Tx() {
setTitle( "JMF/RTP Transmitter");
     config= new Config();
     GridBagLayout gridBagLayout= new GridBagLayout();
     GridBagConstraints gbc;
     JPanel p= new JPanel();
     p.setLayout( gridBagLayout);
     JPanel localPanel= createLocalPanel();
     gbc= new GridBagConstraints();
     gbc.gridx= 0;
     gbc.gridy= 0;
     gbc.gridwidth= 2;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( localPanel, gbc);
     p.add( localPanel);
     JPanel targetPanel= createTargetPanel();
     gbc= new GridBagConstraints();
     gbc.gridx= 1;
     gbc.gridy= 1;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( targetPanel, gbc);
p.add( targetPanel);
     JPanel mediaPanel= createMediaPanel();
     gbc= new GridBagConstraints();
     gbc.gridx= 1;
     gbc.gridy= 2;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( mediaPanel, gbc);
p.add( mediaPanel);
JPanel buttonPanel= new JPanel();
rtcp= new JButton( "RTCP Monitor");
update= new JButton( "Transmission Status");
     update.setEnabled( false);
     rtcp.addActionListener( this);
     update.addActionListener( this);
     buttonPanel.add( rtcp);
     buttonPanel.add( update);
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 3;
gbc.gridwidth= 2;
     gbc.weightx = 1.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.CENTER;
     gbc.fill = GridBagConstraints.HORIZONTAL;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( buttonPanel, gbc);
     p.add( buttonPanel);
getContentPane().add( p);
     list.addMouseListener( this);
     addWindowListener( this);
pack();
setVisible( true);
private JPanel createMediaPanel() {
JPanel p= new JPanel();
     GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
     p.setLayout( gridBagLayout);
     JLabel label= new JLabel( "Media Locator:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
     p.add( label);
     tf_media_file= new JTextField( 35);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 0;
     gbc.weightx = 1.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.HORIZONTAL;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( tf_media_file, gbc);
     p.add( tf_media_file);
     tf_media_file.setText( config.media_locator);
     cb_loop= new JCheckBox( "loop");
     startXmit= new JButton( "Start Transmission");
     startXmit.setEnabled( true);
     startXmit.addActionListener( this);
     gbc= new GridBagConstraints();
     gbc.gridx = 2;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( cb_loop, gbc);
     p.add( cb_loop);
     cb_loop.setSelected( true);
     cb_loop.addActionListener( this);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.CENTER;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( startXmit, gbc);
     p.add( startXmit);
     TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Source");
     p.setBorder( titledBorder);
     return p;
private JPanel createTargetPanel() {
JPanel p= new JPanel();
     GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
     p.setLayout( gridBagLayout);
     targets= new Vector();
     for( int i= 0; i < config.targets.size(); i++) {
     targets.addElement( config.targets.elementAt( i));
listModel= new TargetListModel( targets);
list= new JList( listModel);
     list.addKeyListener( this);
     list.setPrototypeCellValue( "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");
JScrollPane scrollPane= new JScrollPane( list,
ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED,
ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
     gbc= new GridBagConstraints();
     gbc.gridx= 0;
     gbc.gridy= 0;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( scrollPane, gbc);
     p.add( scrollPane);
JPanel p1= new JPanel();
     p1.setLayout( gridBagLayout);
     JLabel label= new JLabel( "IP Address:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
     p1.add( label);
     tf_remote_address= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_address, gbc);
     p1.add( tf_remote_address);
     label= new JLabel( "Data Port:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
     p1.add( label);
     tf_remote_data_port= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_data_port, gbc);
     p1.add( tf_remote_data_port);
JPanel p2= new JPanel();
addTarget= new JButton( "Add Target");
removeTarget= new JButton( "Remove Target");
     p2.add( addTarget);
     p2.add( removeTarget);
     addTarget.addActionListener( this);
     removeTarget.addActionListener( this);
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 2;
     gbc.weightx = 1.0;
     gbc.weighty = 0.0;
     gbc.gridwidth= 2;
     gbc.anchor = GridBagConstraints.CENTER;
     gbc.fill = GridBagConstraints.HORIZONTAL;
     gbc.insets = new Insets( 20,5,0,5);
     ((GridBagLayout)p1.getLayout()).setConstraints( p2, gbc);
     p1.add( p2);
     gbc= new GridBagConstraints();
     gbc.gridx= 1;
     gbc.gridy= 0;
     gbc.weightx= 1.0;
     gbc.weighty= 1.0;
     gbc.anchor= GridBagConstraints.CENTER;
     gbc.fill= GridBagConstraints.BOTH;
     gbc.insets= new Insets( 10, 5, 0, 0);
     ((GridBagLayout)p.getLayout()).setConstraints( p1, gbc);
     p.add( p1);
     TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Targets");
     p.setBorder( titledBorder);
     return p;
private JPanel createLocalPanel() {
JPanel p= new JPanel();
     GridBagLayout gridBagLayout= new GridBagLayout();
GridBagConstraints gbc;
     p.setLayout( gridBagLayout);
     JLabel label= new JLabel( "IP Address:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
     p.add( label);
     JTextField tf_local_host= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 0;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p.getLayout()).setConstraints( tf_local_host, gbc);
     p.add( tf_local_host);
     try {
String host= InetAddress.getLocalHost().getHostAddress();
     tf_local_host.setText( host);
     } catch( UnknownHostException e) {
     label= new JLabel( "Data Port:");
     gbc= new GridBagConstraints();
     gbc.gridx = 0;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.EAST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,0,5);
     ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
     p.add( label);
     tf_data_port= new JTextField( 15);
     gbc= new GridBagConstraints();
     gbc.gridx = 1;
     gbc.gridy = 1;
     gbc.weightx = 0.0;
     gbc.weighty = 0.0;
     gbc.anchor = GridBagConstraints.WEST;
     gbc.fill = GridBagConstraints.NONE;
     gbc.insets = new Insets( 5,5,10,5);
     ((GridBagLayout)p.getLayout()).setConstraints( tf_data_port, gbc);
     p.add( tf_data_port);
     tf_data_port.setText( config.local_data_port);
     TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Local Host");
     p.setBorder( titledBorder);
     return p;
public void actionPerformed( ActionEvent event) {
Object source= event.getSource();
     if( source == addTarget) {
     String ip= tf_remote_address.getText().trim();
     String port= tf_remote_data_port.getText().trim();
     String localPort= tf_data_port.getText().trim();
     addTargetToList( localPort, ip, port);
     if( avTransmitter != null) {
     avTransmitter.addTarget( ip, port);
     } else if( source == removeTarget) {
     int index= list.getSelectedIndex();
     if( index != -1) {
          Target target= (Target) targets.elementAt( index);
          if( avTransmitter != null) {
     avTransmitter.removeTarget( target.ip, target.port);
          targets.removeElement( target);
          listModel.setData( targets);
     } else if( source == startXmit) {
     if( startXmit.getLabel().equals( "Start Transmission")) {
     int data_port= new Integer( tf_data_port.getText()).intValue();
          avTransmitter= new AVTransmitter( this, data_port);
     avTransmitter.start( tf_media_file.getText().trim(), targets);
          avTransmitter.setLooping( cb_loop.isSelected());
     startXmit.setLabel( "Stop Transmission");
     } else if( startXmit.getLabel().equals( "Stop Transmission")) {
          avTransmitter.stop();
          avTransmitter= null;
          removeNonBaseTargets();
          listModel.setData( targets);
     startXmit.setLabel( "Start Transmission");
     } else if( source == rtcp) {
     if( rtcpViewer == null) {
     rtcpViewer= new RTCPViewer();
     } else {
          rtcpViewer.setVisible( true);
          rtcpViewer.toFront();
     } else if( source == cb_loop) {
     if( avTransmitter != null) {
          avTransmitter.setLooping( cb_loop.isSelected());
private void removeNonBaseTargets() {
     String localPort= tf_data_port.getText().trim();
     for( int i= targets.size(); i > 0;) {
     Target target= (Target) targets.elementAt( i - 1);
     if( !target.localPort.equals( localPort)) {
targets.removeElement( target);
     i--;
public void addTargetToList( String localPort,
                         String ip, String port) {
ListUpdater listUpdater= new ListUpdater( localPort, ip,
                              port, listModel, targets);
SwingUtilities.invokeLater( listUpdater);
public void rtcpReport( String report) {
     if( rtcpViewer != null) {
     rtcpViewer.report( report);
public void windowClosing( WindowEvent event) {
     config.local_data_port= tf_data_port.getText().trim();
     config.targets= new Vector();
     for( int i= 0; i < targets.size(); i++) {
     Target target= (Target) targets.elementAt( i);
     if( target.localPort.equals( config.local_data_port)) {
          config.addTarget( target.ip, target.port);
     config.media_locator= tf_media_file.getText().trim();
     config.write();
System.exit( 0);
public void windowClosed( WindowEvent event) {
public void windowDeiconified( WindowEvent event) {
public void windowIconified( WindowEvent event) {
public void windowActivated( WindowEvent event) {
public void windowDeactivated( WindowEvent event) {
public void windowOpened( WindowEvent event) {
public void keyPressed( KeyEvent event) {
public void keyReleased( KeyEvent event) {
Object source= event.getSource();
     if( source == list) {
     int index= list.getSelectedIndex();
public void keyTyped( KeyEvent event) {
public void mousePressed( MouseEvent e) {
public void mouseReleased( MouseEvent e) {
public void mouseEntered( MouseEvent e) {
public void mouseExited( MouseEvent e) {
public void mouseClicked( MouseEvent e) {
Object source= e.getSource();
     if( source == list) {
     int index= list.getSelectedIndex();
     if( index != -1) {
          Target target= (Target) targets.elementAt( index);
          tf_remote_address.setText( target.ip);
          tf_remote_data_port.setText( target.port);
     int index= list.locationToIndex( e.getPoint());
public static void main( String[] args) {
new Tx();
class TargetListModel extends AbstractListModel {
private Vector options;
public TargetListModel( Vector options) {
     this.options= options;
public int getSize() {
     int size;
     if( options == null) {
     size= 0;
     } else {
     size= options.size();
     return size;
public Object getElementAt( int index) {
String name;
if( index < getSize()) {
     Target o= (Target)options.elementAt( index);
name= o.localPort + " ---> " + o.ip + ":" + o.port;
     } else {
     name= null;
     return name;
public void setData( Vector data) {
     options= data;
     fireContentsChanged( this, 0, data.size());
class ListUpdater implements Runnable {
String localPort, ip, port;
TargetListModel listModel;
Vector targets;
public ListUpdater( String localPort, String ip, String port,
               TargetListModel listModel, Vector targets) {
     this.localPort= localPort;
     this.ip= ip;
     this.port= port;
     this.listModel= listModel;
     this.targets= targets;
public void run() {
Target target= new Target( localPort, ip, port);
     if( !targetExists( localPort, ip, port)) {
     targets.addElement( target);
listModel.setData( targets);
public boolean targetExists( String localPort, String ip, String port) {
     boolean exists= false;
     for( int i= 0; i < targets.size(); i++) {
     Target target= (Target) targets.elementAt( i);
     if( target.localPort.equals( localPort)
     && target.ip.equals( ip)
          && target.port.equals( port)) {
          exists= true;
     break;
     return exists;
>>>>>>>>>>>>>>>>>
import java.awt.*;
import java.io.*;
import java.net.InetAddress;
import java.util.*;
import javax.media.*;
import javax.media.protocol.*;
import javax.media.format.*;
import javax.media.control.TrackControl;
import javax.media.control.QualityControl;
import javax.media.rtp.*;
import javax.media.rtp.event.*;
import javax.media.rtp.rtcp.*;
public class AVTransmitter implements ReceiveStreamListener, RemoteListener,
ControllerListener {
// Input MediaLocator
// Can be a file or http or capture source
private MediaLocator locator;
private String ipAddress;
private int portBase;
private Processor processor = null;
private RTPManager rtpMgrs[];
private int localPorts[];
private DataSource dataOutput = null;
private int local_data_port;
private Tx tx;
public AVTransmitter( Tx tx, int data_port) {
     this.tx= tx;
     local_data_port= data_port;
* Starts the transmission. Returns null if transmission started ok.
* Otherwise it returns a string with the reason why the setup failed.
public synchronized String start( String filename, Vector targets) {
     String result;
     locator= new MediaLocator( filename);
     // Create a processor for the specified media locator
     // and program it to output JPEG/RTP
     result = createProcessor();
     if (result != null) {
     return result;
     // Create an RTP session to transmit the output of the
     // processor to the specified IP address and port no.
     result = createTransmitter( targets);
     if (result != null) {
     processor.close();
     processor = null;
     return result;
     // Start the transmission
     processor.start();
     return null;
* Use the RTPManager API to create sessions for each media
* track of the processor.
private String createTransmitter( Vector targets) {
     // Cheated. Should have checked the type.
     PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
     PushBufferStream pbss[] = pbds.getStreams();
     rtpMgrs = new RTPManager[pbss.length];
     localPorts = new int[ pbss.length];
     SessionAddress localAddr, destAddr;
     InetAddress ipAddr;
     SendStream sendStream;
     int port;
     SourceDescription srcDesList[];
     for (int i = 0; i < pbss.length; i++) {
     // for (int i = 0; i < 1; i++) {
     try {
          rtpMgrs[i] = RTPManager.newInstance();
          port = local_data_port + 2*i;
          localPorts[ i]= port;
          localAddr = new SessionAddress( InetAddress.getLocalHost(),
                              port);
          rtpMgrs.initialize( localAddr);
          rtpMgrs[i].addReceiveStreamListener(this);
          rtpMgrs[i].addRemoteListener(this);
     for( int k= 0; k < targets.size(); k++) {
          Target target= (Target) targets.elementAt( k);
          int targetPort= new Integer( target.port).intValue();
          addTarget( localPorts[ i], rtpMgrs[ i], target.ip, targetPort + 2*i);
          sendStream = rtpMgrs[i].createSendStream(dataOutput, i);
          sendStream.start();
     } catch (Exception e) {
          e.printStackTrace();
          return e.getMessage();
     return null;
public void addTarget( String ip, String port) {
     for (int i= 0; i < rtpMgrs.length; i++) {
     int targetPort= new Integer( port).intValue();
     addTarget( localPorts[ i], rtpMgrs[ i], ip, targetPort + 2*i);
public void addTarget( int localPort, RTPManager mgr, String ip, int port) {
     try {
     SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                              new Integer( port).intValue());
     mgr.addTarget( addr);
     tx.addTargetToList( localPort + "", ip, port + "");
     } catch( Exception e) {
     e.printStackTrace();
public void removeTarget( String ip, String port) {
     try {
     SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                              new Integer( port).intValue());
     for (int i= 0; i < rtpMgrs.length; i++) {
     rtpMgrs[ i].removeTarget( addr, "target removed from transmitter.");
     } catch( Exception e) {
     e.printStackTrace();
boolean looping= true;
public void controllerUpdate( ControllerEvent ce) {
     System.out.println( ce);
     if( ce instanceof DurationUpdateEvent) {
     Time duration= ((DurationUpdateEvent) ce).getDuration();
     System.out.println( "duration: " + duration.getSeconds());
     } else if( ce instanceof EndOfMediaEvent) {
     System.out.println( "END OF MEDIA - looping=" + looping);
     if( looping) {
     processor.setMediaTime( new Time( 0));
          processor.start();
public void setLooping( boolean flag) {
     looping= flag;
public void update( ReceiveStreamEvent event) {
     String timestamp= getTimestamp();
     StringBuffer sb= new StringBuffer();
     if( event instanceof InactiveReceiveStreamEvent) {
     sb.append( timestamp + " Inactive Receive Stream");
     } else if( event instanceof ByeEvent) {
     sb.append( timestamp + " Bye");
     } else {
     System.out.println( "ReceiveStreamEvent: "+ event);
     tx.rtcpReport( sb.toString());
public void update( RemoteEvent event) {
     String timestamp= getTimestamp();
     if( event instanceof ReceiverReportEvent) {
     ReceiverReport rr= ((ReceiverReportEvent) event).getReport();
     StringBuffer sb= new StringBuffer();
     sb.append( timestamp + " RR");
     if( rr != null) {
          Participant participant= rr.getParticipant();
          if( participant != null) {
          sb.append( " from " + participant.getCNAME());
          sb.append( " ssrc=" + rr.getSSRC());
          } else {
          sb.append( " ssrc=" + rr.getSSRC());
          tx.rtcpReport( sb.toString());
     } else {
     System.out.println( "RemoteEvent: " + event);
private String getTimestamp() {
     String timestamp;
     Calendar calendar= Calendar.getInstance();
     int hour= calendar.get( Calendar.HOUR_OF_DAY);
     String hourStr= formatTime( hour);
     int minute= calendar.get( Calendar.MINUTE);
     String minuteStr= formatTime( minute);
     int second= calendar.get( Calendar.SECOND);
     String secondStr= formatTime( second);
     timestamp= hourStr + ":" + minuteStr + ":" + secondStr;
     return timestamp;
private String formatTime( int time) {
     String timeStr;
     if( time < 10) {
     timeStr= "0" + time;
     } else {
     timeStr= "" + time;
     return timeStr;
* Stops the transmission if already started
public void stop() {
     synchronized (this) {
     if (processor != null) {
          processor.stop();
          processor.close();
          processor = null;
     for (int i= 0; i < rtpMgrs.length; i++) {
     rtpMgrs[ i].removeTargets( "Session ended.");
          rtpMgrs[ i].dispose();
public String createProcessor() {
     if (locator == null) {
     return "Locator is null";
     DataSource ds;
     DataSource clone;
     try {
     ds = javax.media.Manager.createDataSource(locator);
     } catch (Exception e) {
     return "Couldn't create DataSource";
     // Try to create a processor to handle the input media locator
     try {
     processor = javax.media.Manager.createProcessor(ds);
     processor.addControllerListener( this);
     } catch (NoProcessorException npe) {
     return "Couldn't create processor";
     } catch (IOException ioe) {
     return "IOException creating processor";
     // Wait for it to configure
     boolean result = waitForState(processor, Processor.Configured);
     if (result == false)
     return "Couldn't configure processor";
     // Get the tracks from the processor
     TrackControl [] tracks = processor.getTrackControls();
     // Do we have atleast one track?
     if (tracks == null || tracks.length < 1)
     return "Couldn't find tracks in processor";
     // Set the output content descriptor to RAW_RTP
     // This will limit the supported formats reported from
     // Track.getSupportedFormats to only valid RTP formats.
     ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW_RTP);
     processor.setContentDescriptor(cd);
     Format supported[];
     Format chosen;
     boolean atLeastOneTrack = false;
     // Program the tracks.
     for (int i = 0; i < tracks.length; i++) {
     Format format = tracks[i].getFormat();
     if (tracks[i].isEnabled()) {
          supported = tracks[i].getSupportedFormats();
          // We've set the output content to the RAW_RTP.
          // So all the supported formats should work with RTP.
          // We'll just pick the first one.
          if (supported.length > 0) {
          if (supported[0] instanceof VideoFormat) {
               // For video formats, we should double check the
               // sizes since not all formats work in all sizes.
               chosen = checkForVideoSizes(tracks[i].getFormat(),
                                   supported[0]);
          } else
               chosen = supported[0];
          tracks[i].setFormat(chosen);
          System.err.println("Track " + i + " is set to transmit as:");
          System.err.println(" " + chosen);
          atLeastOneTrack = true;
          } else
          tracks[i].setEnabled(false);
     } else
          tracks[i].setEnabled(false);
     if (!atLeastOneTrack)
     return "Couldn't set any of the tracks to a valid RTP format";
     // Realize the processor. This will internally create a flow
     // graph and attempt to create an output datasource for JPEG/RTP
     // audio frames.
     result = waitForState(processor, Controller.Realized);
     if (result == false)
     return "Couldn't realize processor";
     // Set the JPEG quality to .5.
     setJPEGQuality(processor, 0.5f);
     // Get the output data source of the processor
     dataOutput = processor.getDataOutput();
     return null;
static SessionAddress destAddr1, destAddr2;
* For JPEG and H263, we know that they only work for particular
* sizes. So we'll perform extra checking here to make sure they
* are of the right sizes.
Format checkForVideoSizes(Format original, Format supported) {
     int width, height;
     Dimension size = ((VideoFormat)original).getSize();
     Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
     Format h263Fmt = new Format(VideoFormat.H263_RTP);
     if (supported.matches(jpegFmt)) {
     // For JPEG, make sure width and height are divisible by 8.
     width = (size.width % 8 == 0 ? size.width :
                    (int)(size.width / 8) * 8);
     height = (size.height % 8 == 0 ? size.height :
                    (int)(size.height / 8) * 8);
     } else if (supported.matches(h263Fmt)) {
     // For H.263, we only support some specific sizes.
     if (size.width < 128) {
          width = 128;
          height = 96;
     } else if (size.width < 176) {
          width = 176;
          height = 144;
     } else {
          width = 352;
          height = 288;
     } else {
     // We don't know this particular format. We'll just
     // leave it alone then.
     return supported;
     return (new VideoFormat(null,
                    new Dimension(width, height),
                    Format.NOT_SPECIFIED,
                    null,
                    Format.NOT_SPECIFIED)).intersects(supported);
* Setting the encoding quality to the specified value on the JPEG encoder.
* 0.5 is a good default.
void setJPEGQuality(Player p, float val) {
     Control cs[] = p.getControls();
     QualityControl qc = null;
     VideoFormat jpegFmt = new VideoFormat(VideoFormat.JPEG);
     // Loop through the controls to find the Quality control for
     // the JPEG encoder.
     for (int i = 0; i < cs.length; i++) {
     if (cs[i] instanceof QualityControl &&
          cs[i] instanceof Owned) {
          Object owner = ((Owned)cs[i]).getOwner();
          // Check to see if the owner is a Codec.
          // Then check for the output format.
          if (owner instanceof Codec) {
          Format fmts[] = ((Codec)owner).getSupportedOutputFormats(null);
          for (int j = 0; j < fmts.length; j++) {
               if (fmts[j].matches(jpegFmt)) {
               qc = (QualityControl)cs[i];
               qc.setQuality(val);
               System.err.println("- Setting quality to " +
                         val + " on " + qc);
               break;
          if (qc != null)
          break;
* Convenience methods to handle processor's state changes.
private Integer stateLock = new Integer(0);
private boolean failed = false;
Integer getStateLock() {
     return stateLock;
void setFailed() {
     failed = true;
private synchronized boolean waitForState(Processor p, int state) {
     p.addControllerListener(new StateListener());
     failed = false;
     // Call the required method on the processor
     if (state == Processor.Configured) {
     p.configure();
     } else if (state == Processor.Realized) {
     p.realize();
     // Wait until we get an event that confirms the
     // success of the method, or a failure event.
     // See StateListener inner class
     while (p.getState() < state && !failed) {
     synchronized (getStateLock()) {
          try {
          getStateLock().wait();
          } catch (InterruptedException ie) {
          return false;
     if (failed)
     return false;
     else
     return true;
* Inner Classes
class StateListener implements ControllerListener {
     public void controllerUpdate(ControllerEvent ce) {
     // If there was an error during configure or
     // realiz

I do this all the time, I put my MBP to a 60 inch Sharp. If you have the video working do the simple thing first. Check to make sure your sound is on your TV and Mac. Then if that doesn't work go to System Prefrences and under sound go to a tab called Output and see if your TV is listed and if it is change it to that setting
Hope It Works

I need JDK 1.5.0_8 for 64 bit windows 7

I need JDK 1.5.0_8 for 64 bit windows 7
Where may I download it?

Thanks for getting me to the troublemaker ArielK.
I can confirm disabling APSDaemon.exe, aka, new Apple Push for WiFi Sync and renaming (or deleting if you are more risk oriented) APSDaemon.exe and APSDaemon_main.dll in this folder "C:\Program Files (x86)\Common Files\Apple\Apple Application Support" resolved my issue.
Alternatively, another slightly more annoying but less techy workaround for those nervous about changing filenames is to start iTunes in Safe Mode every time. You must do it via Programs > iTunes > hold down Ctrl-Shift then click iTunes (does not work if you do it by clicking a short cut in programs list or taskbar, whatever...). Maybe this disables WiFi Sync by default, dunno. Don't care at this point, but it seemed to work.
I can live without WiFi Sync for now, but its a nice feature I would really like to use in the future.
Apple please fix!!!
Running: Windows 7 Home Premium x64, iTunes 10.5.2.11.

What is the pinout for the 6602 relative to the 'D' connector.

I am developing a custom board to connect with the PCI-6602 Counter/Timer card. I will use the SH68-68-D1 Shielded Cable, 68-pins, 2 m to connect from the 6602 to the custom board. What I need to know is what is the pinout relative to the 'D' connector. The manual shows the connector as a rectangle.
Thanks,
Tony

Hi Tony,
The routing from the PCI-6602 through the SH68-68-D1 is one-to-one, so I believe that all you should need is the pinout for the 6602. This is shown below.
This information can be found in Measurement & Automation Explorer (MAX) by right-clicking on the device and selecting "Device Pinouts".
I hope this is what you needed. Post back if you have further questions.
Ed W.
Applications Engineer
National Instruments
Message Edited by Ed W on 12-13-2006 04:14 PM
Message Edited by Ed W on 12-13-2006 04:14 PM

Sending order confirmation to external app. for stock transport order

Hello,
What I need to do is to send an order confirmation from a STO to an external application. In more practical terms, the scenario is as follows.
We receive orders from an external application and an STO will be created by using SAP Idoc PORDCR04. Then, after running the availabillity check, I need to send an electronical confirmation back from the STO to this application so they can see the order confirmation in their application
How can I do that?
Edited by: Gunnar Aroen on Nov 18, 2011 2:22 PM

Hello Raghu,
I need to send the order confirmation to E-mail for different customers. The
e-mail id is same but i have to send to 300 different customers. Is there any
option available in SAP to do this otherwise i have to trigger the output
manually for this 300 customer numbers.
I have a question here with reference to your questions of triggering a Order confirmation E-Mail --> Could you please explain the business reason of triggering E-mail to same recipient multiple times ? Just think over it...Sending E-mails for 300 number of Customer on a single E-mail ID is not making any sense.
You can maintain multiple E-mail ID in Customer master record and as per SAP standard, email will be triggered to only one recipient. Anyway please refer to the below suggestion of your question:-
1:- Please reach out to Technical consultant and try developing a program which will have selection criteria of Sales Order, Customer ID, Output Type and Number of execution as selection screen which in turn will call the driver program and trigger the Email 300 number of times.
Kindly update the forum after you carry out this exercise.
Regards,
Sarthak

Confirm the char value for in UTF8

Hi Team,
we are facing an issue with one of the special characters in Oracle Database:
1. We have description with ® in description
2. We have the database charset as UTF8
3. The setting for the application is Unicode
4. When we query the item on the Application, SQL Developer, the description shows fine
5. When we run the query connecting to the UNIX server with the charset UTF8, the description shows fine.
6. When we run the query connecting to the UNIX Server with the charset ISO-8859-1:1998 (Latin-1, West Europe), the description shows Â® instead of ®.
7. The character value in the database shows as 49838.
8. When we check for the query SELECT CHR (49838) FROM DUAL in SQL developer, the output shows as ®
9. When we check for the query SELECT CHR (49838) FROM DUAL with the UTF8 as charset then the output shows as ®
10. When we check for the query SELECT CHR (49838) FROM DUAL with the ISO-8859-1:1998 (Latin-1, West Europe) as charset then the output shows as Â®
11. We have also tried copying the character ® from charmap and using it in the description and even then it shows as Â® when connected to UNIX using the charset ISO-8859-1:1998 (Latin-1, West Europe)
Can anyone confirm the char value for ® in UTF8.
Thanks
Madhavi Gadicherla

194 174 (hex C2 AE)
http://www.denalimultimedia.com/info/Articles.aspx?cid=07&topic=unicode_utf-8
http://www.utf8-zeichentabelle.de
http://www.williamrobertson.net/documents/ascii.html
194 when interpreted on its own is the Â character, and 174 is ®. The application needs to know it's a 2-byte UTF-8 character.
49838 is C2A2 in hex, which looks correct for the CHR function in a UTF-8 database.

Rules for doors and interface is junk

Need to have a rule for all doors and when I try to edit a old rule it takes me to MAKE A NEW RULE. this is junk. Does anyone test the software before sending it out. And why change it? it was working fine now we have to learn how to navagate the new software.

Hi,
Please check the following settings:
1. Go to Transaction Code FS00. Give your Bank GL A/c number and press enter. Click on "Create/Bank/Interest" and find out your FSG. For example your FSG is G005.
2. Go to Transaction Code OBC4. Select your Company code's FSV and double click on "Field Status Groups". Then select FSG which is available in your bank GL account (G005) and double click on it. Now you can find various Groups.
3. Open another screen and go to the transaction code for posting keys OB41. Double click on your posting key. (Its may be either 40 or 50). Click on "Maintain Field Status".
4. Now you can compare various field statuses which are available in Posting Keys and Field Status Groups. Field Statuses between these two should be same. It not make necessary changes accordingly and save the data.
5. Now close your existing SM35 session and open it again. Select your session and press Shift+F4 to release the session. Now you can execute your batch input session.
Hope this helps.
Regards,
Kannusamy S

Customized RF transaction for Confirmation of Transfer Order for WM

Hello everyone !
I need to develop a customized RF transaction for tcode LM05 and LT11. where i need to call custome screens for
1. Select transfer order - ( which will fetched from any handheld device like BARCODE scanner )
2. Navigate to screen SOURCE INFORMATION - Multiple Materials on pressing on NEXT button the control goes to
3. Destination Information - Multiple Materials and on ENTER pushbutton the TO gets confirmed.
Basically i need to create ZLM05 and do the above.
Please can any one provide the steps to achieve the above funcitonality ,
Thanks & Regards,

Solved

IMac Freezing Issue -Need Confirmation...

Hey all,
I need confirmation on whether or not zapping the PRAM seems to stop the iMac freezing issue. I have had 3 freezes within 10 minutes. I restarted after my last preparation to installing Leopard and the screen saver kicked in, which is the 'Cosmos' slide show and the graphics froze up. Screen went black and I left it for a couple of minutes. I came back to it, and had an image on the screen, but it was still locked up. So I restarted it. After boot up, I opened Activity monitor, and locked up again.
So I zapped the PRAM on this 3rd restart and have not locked up since. I'd bet 100 to 1 that if I were to restart, without the PRAM reset, I would crash within 5 minutes of the start up.
I really believe without a doubt these iMac reboot issues are related to specific EFI versions failing to initialize graphics correctly.
Can anyone confirm this? If your iMac crashes, does Zapping the PRAM fix it?
I'll be calling Executive relations contact and telling her the bad news.
Okay, so first off, this isn't a solution to this iMac plague, but it should prevent the freezing and NO, it does not have to do with removing the ATI drivers.
I was asked to install Leopard by Executive relations at Apple and told her that, as soon as I do, my iMac will freeze. So, I have been preparing the Leopard install and have crashed 3 times, in a row... at that point I said, Leopard is going to be a no go but I needed to use my iMac without it crashing. So, zapped the PRAM like I did before and immediately the graphic freezes went away.
So

Here is my experience, iMac 24:
I bought in JR NY 2 weeks ago. I had to use it without internet connection (so no updates) and no freezes.
Then I connected to internet and installed the available updates and start to get the freezes, even trying the PRAM reset.
I tried to remove the extra memory, change memory slot but no lucky, video artifacts (like pixels not refreshing) when moving the mouse over the dock icons then freeze.
I had no other softwares installed at all, only the OS applications.
I formatted the HD and reinstalled the Tiger and didn't accepted any update, so I could use the imac for 2 days without a single freeze, but some black screens when screen saver starts.
Since no freezes, I decided to update the OS again and after the first boot the freezes came back very fast, I could start a freeze in about 10 seconds.
I tried the PRAM reset without sucess and my machine was ready to go to a tech person.
Yesterday I updated the OS to 10.4.11 and did a PRAM reset after the update and tested the machine for 2 hours without a freeze or video artifacts, looks very stable, but I have to test it more.
You guys tried the Tiger last update ?
Ulisses

15454 Password Recovery? Pinouts for a 15454-EPC cable?

I want to reset a lost password on a 15454 TCC+ card. Does anyone have the pinouts for the console cable 15454-EPC refered to in this cisco.com link? I am hoping to make one it's faster.
http://www.cisco.com/en/US/products/hw/optical/ps2001/products_tech_note09186a00804f268c.shtml
Thanks

you will need a password recovery cable to be able to perform this procedure.

Pinouts for SB Live Platin

Can anyone provide me with the pinouts for a SoundBlaster Li've Platinum PCI card? I need to know the pins for where the Li'veDri've would connect (The part that looks like an IDE connection). I want to hook up my front case audio connections (mic and headphones). I know the board has to have these going off those pins, because the Li'veDri've for that model supports analog signal and has a mic and headphone jack on it. The headphone cut the speakers when a jack is plugged in. I'd love to get a schematic on this board, but I have'nt found anything seaching the web. I figured someone here aor mod or tech from creative could supply the info. Thanks in advance for any help!

Hi
Search Creative support (knowledge base). There is some pinouts data available.
If not there then try driverheaven.
.jtpMessage Edited by jutapa on 04-6-2005 04:32 PM

Possible Battery Problem - Need Confirmation..

Hello all,
I bought my 3rd generation iPod last year knowing the batteries dont last forever, I bought it off of someone else so it had already been used beforehand. I have had great use from it however even if I fully charge the battery it cuts out within only 5 minutes of playtime. It will turn on and show an apple only to cut out again.
I basically just need confirmation whether this iPod needs a new battery so that I can purchase a new one or send it off to be sorted, what I dont want to do is send it off not knowing what the actual problem is.
I would appreciate if someone could just comment on this situation as soon as possible so that I can resolve this.
Many thanks in advance from whoever helps.
Sean.

Try these:
- reset, several times
- update the firmware
- calibrate the battery and the battery meter
If noe of these work, Apple will replace the battery for $60. You can do itself cheaper but, unless you've done this before, it's easy to turn a small repair into a large one.

I need confirmation on WVC2300 pinout for door lock.

Similar Messages

Maybe you are looking for