I need help: I've a macbook pro with Mavericks....when I click on the Firefox icon on the fox, it just jumps and then eventually invokes slowly. What can I do?
basically, when I boot up the mac, I click on the firefox icon...it just jumps and sometimes it executes. I probably would have to wait a bit for trying to get into the browser successfully. Anything I can do? Thanks
Hi,
This article [https://support.mozilla.org/en-US/kb/firefox-takes-long-time-start-up] suggests that you
#Change your homepage
#Check to make sure your extensions are up to date
# Check to make sure that your antivirus allows Firefox
#Check to make sure that you have the preference "Do not load tabs until selected"
However, I would recommend that you close other programs and clear the cache of the profile to increase the load time. [[How to clear the Firefox cache]] A quicker way to do this if you do not have any immediate data to save is to Reset Firefox. [[Recovering important data from an old profile]]
Similar Messages
-
I keep getting Configuration Error: 6 when I try to open my Adobe CS5.1 on my Macbook Pro with 10.6.8 operating system. I have tried to restart in safe mode and un/re-installing. What is there I can do to prevent this?
Error 2, 4 (or -4), 6, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?
Solution may be found if you search in the "More Like This" section over in the right column.
-
I need help to decide which macbook pro is best for photo editing, editing movies and doing all the rest too like microsoft office products ...excel, word etc. I am new to the apple world and have liked the idea of the MAC Book Pro 13" but really dont know if this is good enough or if the computer will soon crash?
13-inch: 2.6GHz
with Retina display
Specifications
2.6GHz dual-core Intel Core i5
Turbo Boost up to 3.1GHz
8GB 1600MHz memory
512GB PCIe-based flash storage1
Intel Iris Graphics
Built-in battery (9 hours)2That's a fine machine and, with 8GB of RAM and 512GB flash storage should serve you well for light video/photo editing as well as for 'normal' usage. And it should last you for years to come.
Good luck in making your decision!!
Clinton -
I have a cd rom for my italian class, but am unable to load it on my macbook pro with Mavericks installed.
Someone has said i need Rosetta, but understand that Apple stopped installing this!1
Can anyone suggest anything to help me??Many educational CDs have not been upgraded due to lack of funds in the educational market to pay for the such updates.
This situation is due primarily to the fact that one of the major political parties in this country favors tax cuts to the rich while cutting federal educational support funding (or eliminating the federal Department of Education altogether).
However, you can restore Rosetta and run your educational CD if you install Snow Leopard Server ($20) into Parallels (up to $79) for use in Lion/Mt. Lion/Mavericks:
[click on image to enlarge]
More information here:
http://forums.macrumors.com/showthread.php?t=1365439 -
Hi, I need help for my notebook Macbook Pro - I turned on the notebook and the screen look like start but did not start nothing, the screen froze and continuing load, load and never stop
screen look on
-
I am trying to instal the latest version of iTunes onto my MacBook Pro, but my computer has been "configuring" the installation since 5pm yesterday and now it is 10:30am. It has never done this before. Can anybody help me out?
Many thanks b Noir
This is a copy of ONEof the keys in the registry I changed as told by Apple support today. I also have changed others as instructed by GEAR software support to manually delete GEAR drivers (that I had installed but couldn't delete some of the others they mentioned from Windows system 32. Then some bright spark at work told me I need the Gear drivers so I downloaded the software and installed again.
Sorry, just this minute went to insert image and it is giving me a message saying this sort of content is not allowed?.
The most recent key I altered is in: HKey _local _machine. System\class - 4D36E965-E325-11CEBFC1-08002BE10318. Upper Filter data: Upper filter NTIDrvr SiRem GEARAspiWDN.
The GEARsoftware info about manually deleting GEAR drive is from:
http://www.gearsoftware.com/wiki/index.php?title=DRIVERS:_Windows_-_Updating%2C_ removing%2C_64_bit_versions%2C_etc
I hope you can help -
I have a Macbook Pro that I have just renewed and transferred over my old hard drive (also from a Macbook Pro). Now when I turn on the computer and ITunes opens I get error (-50) and then error 5002 when I try to sign in to ITunes Store - Help!
My dealer has tried and failed (twice) to correct this and I have tried deleting the two items in the Itunes folder but no luck!were you able to get help on this? I need help on error 5002 as well. thank you
-
I want to install xp on my MacBook Pro with i5 processor, but that creates the partition and restart the computer just stays in the following message: The Setup is inspecting your hardware configuration of your computer, someone can help me with this ?
The answer has not changed since your last post here https://discussions.apple.com/thread/3230576?tstart=0
There are no XP or Vista drivers for the new Apple computer hardware. Apple stopped XP and Vista support. http://support.apple.com/kb/HT4410. -
My macbook pro will not let me change my background or screensaver. It only shows a pinwheel and then I have to force quit it! HELP.
Sounds like one of your preference (.plist) files are corrupted.
See #12/#13 Step here
..Step by Step to fix your Mac
Deleting the System Preference or other .plist file -
Everything on my Macbook Pro with Mavericks runs very slowly
I have a 13" macbook pro with Mavericks operating system, and it is only a little over a year old. In the last 2 or 3 months everything on the computer has been running incredibly slowly.
I first noticed it when streaming online videos, the audio would be several seconds ahead of the video, but the lagging has started everywhere else too. When I type the text appears several seconds after it has been typed, it takes much longer than it should to scroll down webpages and the cursor often freezes, I have even noticed a very long lag switching between webpages or applications.
I have very few things saved on this computer, just some Word documents and pictures. I did have Sims 3 installed but I uninstalled it thinking it may be the problem.
I have also noticed a very audible metallic plinking noise that could be unrelated. It started ] maybe 2 months before the lagging did and sounds like it's coming from the bottom right hand corner of the computer. I'm considering resetting my computer to factory settings because I haven't been able to find anything to fix this issue.The hard drive is located in the bottom right of your model and I experienced a very similar issue twice in less than a year of purchase. I suggest you back all your data up as soon as possible as it may be the signs of a hard drive beginning to fail. My symptoms were it would take longer to start up and I would get the spinning ball when I secondary clicked. Before it would fail, I would try and repair errors found in disk utility and it would say it could not be repaired, back up as much data as you can. By that point, it was too late to back anything up. From there, I would get a loading bar on startup and once it loaded, it would shut down. But it could be a less serious issue as well. It could also be the SMC, PRAM, or errors in your hard drive's coding. But before you follow these steps, back all your stuff up that you want or need in case it is your hard drive. Boot the machine into recovery mode by holding in command and r as soon as you turn it on. After it loads, you should get a box to pick your language. Select your language and select disk utility. In there, click Macintosh HD and verify the disk. If anything appears in red text, there are errors that need to be fixed. All you have to do is click repair. If it says they can't be repaired and to back up your data, your hard drive may have failed. To reset the SMC, plug in the mac and shut it down. On the left side, located the control, option, and shift keys. Hold those down along with the power button. Hold it for a few seconds and let them go. It's normal the machine won't turn on and the light on the charger will change state. Next, reset the PRAM. Shut down the Mac and located command, option, P, and R on your keyboard. You're going to turn on the Mac and as soon as you do so, hold those four keys down. It's going to shut down immediately but keep holding them in. It will turn on and make the "bong" noise like it normally does. Let it cycle about two or three times and let the keys go and wait for it to start up.
I hope this helps and good luck! -
How to setup wifi Epson stylus SX 435W printer and scanner on macbook pro with mavericks
how to setup wifi on Epson stylus SX 435W printer and scanner on macbook pro with mavericks..that is printer works recognise comptuer but when it comes to scan error shows as comunication error occured
please helpmukhi23 wrote:
how to setup wifi on Epson stylus SX 435W printer and scanner on macbook pro with mavericks..that is printer works recognise comptuer but when it comes to scan error shows as comunication error occured
please help
Read the user manual that came w/the printer/scanner, contact Epson to see if you need to update your scanner drivers to work in Mavericks also check Software Update. Check out the following links:
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
A scanner driver you may wish to consider: VueScan Scanner Software -
I just brought a brand new Macbook pro retina display, when i connect it to my apple tv through airplay its too slow and when it try to play a movie apply tv is always a minute or 2 behind. How can i fix this?
Hello HanaAmer1,
We've an article which provides troubleshooting steps that can help get AirPlay workign correctly.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Cheers,
Allen -
Can I connect ps4 to my Macbook Pro with retina so it displays on the Macbook Pro.
Can I connect ps4 to my Macbook Pro with retina so it displays on the Macbook Pro . If I can how do I do it and what do i need to do it.
No. There's no video input.
-
I am trying to find an app or software to burn iMovie 11 slideshow to a dvd. I have a MacBook Pro with Mavericks. There are a lot of DVD Creator apps at the App store. Looking for a recommendation of what to use and tips. Thank you.
I've been using "Burn" for years and it has been the only DVD burning software I have ever used for the mac. I have never needed to look at other apps. Unless you want something that has more bells and whistles such as Roxio's "Toast" : http://www.roxio.com/enu/products/toast/pro/overview.html
There are thousands of quality free apps out there for the mac that are not part of the App Store. All you have to do is read reviews online, do a little search, the Apple forums are full of recommendations from experienced users that have been here for years...
Maybe you are looking for
-
Windows XP via BootCamp on MBA with CD
I have a licensed copy of Windows XP on a CD and I would like to install that on my MBA 11' Mid2013. Only problem is MBA's don't have a CD-Drive. How can I proceed to put Windows XP from this CD onto my MBA with BootCamp? Edit: Sorry for maybe postin
-
To create content for my new webpage, I went ahead and wrote a number of blogs. But, iWeb keeps the order they were posted in. Does anybody know how to change the order? I guess one solution is to start again and just cut and paste everything.
-
Labor Management Functionalities
Hi Experts , Can any one let me know if we can perform the Labor management functionalities in ECC 6.0 with or without RF Devices.Your comments will be appreciated. <b>Labor Management</b> 1 Engineered standards for tasks 2 Discrete standards for tas
-
Exporting to flv and resizing comp causing audio loss and time extention
I am rendering 4 comps of different lengths at 1920 x 1080 to .flv format and 480 x 270. The longest and shortest videos have come out fine. The other two both cut out the audio around the middle of the clip and for some reason extend the total len
-
FireFox 13.01 won't install Flash Player Plugin
At some point in the not too distant past my Flash player stopped working in FireFox so I'm trying to remedy that. I see all the hooplah going on about incompatibility but I can't get to that point because the plug-in won't install in FireFox. I've t