I need HELP! I want to populate fields from a data connection...

I am new to livecycle and am having problems making this work...
I have an xml data table that is 5 columns wide and 1000 rows deep. (So too much data for list boxes)
The data connection comes in looking like this:    - DataConnection
                                                                               - (Ordered Group)
                                                                                    -Row
                                                                                          -(Ordered Group)
                                                                                                Job
                                                                                                Customer
                                                                                                Part Number
                                                                                                Rev
                                                                                                Description
When I pull Row into the form it makes a subform with the 5 fields as above.
When I preview this it automatically pulls in the first record from the data source...I want to be able to fill in Job manually and have the other
fields automatically pull in the appropriate information from the correct row in the data source. I have not been able to do this! Can anyone
help me?
Thank You,
CLC

Hello,
I am sorry to say that, i felt hard in understanding the requirement. Can you please pass over the working copy to my email address [email protected], i try to get what you are looking for.
Please find a sample that you can download from the link below, which demonstrates populating fields from a data connection. please take a look at it and i hope this will help you.
https://acrobat.com/#d=5TstZ2VeptoSs6IAZ*81Yw
thanks,
Rajesh

Similar Messages

Need help to find out proper fields from proper tables!

What is the field name and the corresponding table name for
currency and order quantity ?
its related to SD module

Hi,
vbak-NETWR "currency ( if not worth try for WAERK,STWAE fields in the same vbak table )
vbap-KWMENG "order quantity -Cumulative order quantity in sales units
VBAP-NETWR "Net value of the order item in document currency
Please reward if its useful to you
Regds
sivaparvathi
If your problem is not solved ,feel free to ask .we will try for other options
Message was edited by:
Siva Parvathi

HT4623 hy i need help i want to downgrade my iphone 4 from ios 6.0.1 to 5.1.1 how can i do because i dont like the ios 6.

hy i need help i want to downgrade my iphone 4 from ios 6.0.1 to 5.1.1 how can i do because i dont like the ios 6. pls help thank

There's no official way to do that. Downgrading was never supported since the first iPhone.

Start Routine to Populate Account Group Field from Master data of 0Customer

Hello Friends. Please help me edit this ABAP code to make it work. I am putting this code in start routine in between two DSO. where I am using the
Start Routine to Populate Account Group Field from Master data of 0Customer. I do not want to use read from master data functionality since that field 0customer is not there in dso but similar field 0debitor is there. so i want to put this code
during the load from source DSO to Target DSO.
Error Explicit length specifications are necessary with types C, P, X, N und
DATA: L_S_DP_LINE TYPE DATA_PACKAGE_sTRUCTURE.
    types: begin of comp,
     CUSTOMER       type /BI0/OICUSTOMER,
     ACCNT_GRP          type /BI0/OIACCNT_GRP,
   end of comp.
    DATA: l_S_comp type comp.
    DATA: L_th_COMP TYPE HASHED TABLE OF COMP WITH UNIQUE KEY customer INITIAL SIZE 0.
IF L_th_COMP[] IS INITIAL.
SELECT CUSTOMER ACCNT_GRP FROM /BI0/PCUSTOMER APPENDING CORRESPONDING FIELDS OF TABLE L_th_COMP.
ENDIF.
LOOP AT SOURCE_PACKAGE INTO L_S_DP_LINE.
READ TABLE L_TH_COMP INTO L_S_COMP WITH TABLE KEY CUSTOMER = L_s_DP_LINE-CUSTOMER
IF SY-SUBRC = 0.
L_S_DP_LINE-/BIC/ACCNT_GRP = L_S_COMP-/BIC/ACCNT_GRP.
MODIFY SOURCE_PACKAGE FROM L_S_DP_LINE.
ENDIF.
ENDLOOP.
soniya kapoor
Message was edited by:
        soniya kapoor

Hello Wond Thanks for Good Answer and good option, But Client does not like this option and does not like Nav Attribute so he does not want to turn on any Nav Attribute, In general also We hav requirement to read a third table while uploading 1 dso table to 2 dso table,
so Please help me edit this ABAP code to make it work. I am putting this code in start routine in between two DSO. where I am using the
Start Routine to Populate Account Group Field from Master data of 0Customer.
No syntax Error But during the load it is updating the source table and not the target table. how to define now target table.
***SOURCE DSO Table
types: begin of typ_tgl1.
    include type /BIC/AZDAFIAR000.
    types: end of typ_tgl1.
    types: begin of comp,
     CUSTOMER       type /BI0/OICUSTOMER,
     ACCNT_GRP          type /BI0/OIACCNT_GRP,
   end of comp.
DATA: L_th_COMP TYPE HASHED TABLE OF COMP WITH UNIQUE KEY customer
INITIAL SIZE 0.
data: wa_itab type COMP.
    data: wa_zdtg type typ_tgl1.
IF L_th_COMP[] IS INITIAL.
***Master Data Table
SELECT CUSTOMER ACCNT_GRP FROM /BI0/PCUSTOMER APPENDING CORRESPONDING
FIELDS OF TABLE L_th_COMP.
sort L_th_COMP by CUSTOMER.
ENDIF.
LOOP AT L_th_COMP into wa_itab.
select * from /BIC/AZDAFIAR000 into wa_zdtg
                    where DEBITOR eq wa_itab-CUSTOMER. *** SOURCE DSO Table
IF SY-SUBRC = 0.
wa_zdtg-ACCNT_GRP = wa_itab-ACCNT_GRP.
MODIFY /BIC/AZDAFIAR000 from wa_zdtg. *** modify SOURCE DSO Table
ENDIF.
endselect.
    endloop.
soniya kapoor

I Need Help to Access The Source Code From A Form to Know the Calculation Formula

Hi,
I Need Help to Access The Source Code From A Form to Know the Calculation Formula. The application is a windows form application that is linked to SQL Server 2008. In one of the application forms it generates an invoice and does some calculations. I just
need to know where behind that form is the code that's doing the calculations to generate the invoice, I just need to get into the formula that's doing these calculations.
Thank you so much.

Hi,
Thanks for the reply. This is a view and [AmountDue] is supposed to be [CurrentDueAmount] + [PastDueAmount] - [PaidAmount]. The view is not calculating [PaidAmount] right . Below is the complete code of the view. Do you see anything wrong in the code ?
Thanks.
SELECT [isi].[InvoiceID], [ii].[DueDate], [SubInvoiceID] = [isi].[ID], [INV_FacilityID] = [if].[ID], [if].[FacilityID],
[iff].[FacilityFeeID], [LoanID] = NULL, [isi].[PortfolioID], [isi].[Portfolio],
[PaymentType] = [isis_fee].[SectionType], [Name]
= [iff].[Name], [ReceivedAmount], [dates].[CurrentDueAmount],
[PastDueAmount] = CASE WHEN ISNULL([ReceivedAmount],
0) > 0 THEN [pastdue].[PastDueFeeAmount] + ISNULL([ReceivedAmount], 0)
WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply reset to current. */ CASE WHEN [pastdue].[PastDueFeeAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN 0 ELSE [pastdue].[PastDueFeeAmount]
+ ISNULL([ReceivedAmount], 0) END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[pastdue].[PastDueFeeAmount] < 0 THEN 0 ELSE
[pastdue].[PastDueFeeAmount] END, [PaidAmount] = CASE WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply rest to current. */ CASE WHEN [pastdue].[PastDueFeeAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN - ([pastdue].[PastDueFeeAmount]
+ ISNULL([ReceivedAmount], 0)) ELSE 0 END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[pastdue].[PastDueFeeAmount] < 0 THEN - [pastdue].[PastDueFeeAmount]
ELSE 0 END, [AmountDue] = [unpaid].[UnpaidFeeAmount], [ID] = [iff].[FacilityFeeID]
FROM [dbo].[INV_SubInvoice] isi JOIN
[dbo].[INV_Invoice] ii ON [isi].[InvoiceID]
= [ii].[ID] JOIN
[dbo].[INV_Facility] [if] ON [isi].[ID] = [if].[SubInvoiceID]
JOIN
[dbo].[INV_FacilityFee] iff ON [if].[ID] = [iff].[INV_FacilityID]
JOIN
(SELECT [sis_fee].[ID],
[sis_fee].[SectionTypeCode], [SectionType] = [st_fee].[Name], [sis_fee].[INV_FacilityFeeID]
FROM
[dbo].[INV_SubInvoiceSection] sis_fee JOIN
[dbo].[INV_SectionType] st_fee ON [sis_fee].[SectionTypeCode] = [st_fee].[Code]
WHERE [INV_FacilityFeeID]
IS NOT NULL AND [StatusCode] = 'BILL') isis_fee ON [iff].[ID] = [isis_fee].[INV_FacilityFeeID] JOIN
(SELECT [iffa].[SectionID],
[AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]),
[AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedFeeAmount]),
[ReceivedAmount] = SUM([iffa].[ReceivedFeeAmount])
FROM
[dbo].[INV_FacilityFeeAccrual] iffa
GROUP BY [iffa].[SectionID])
dates ON [isis_fee].[ID] = [dates].[SectionID] LEFT JOIN
(SELECT *
FROM
[dbo].[INV_FacilityFeeAccrual]) unpaid ON [dates].[SectionID] = [unpaid].[SectionID] AND
[dates].[AccrualDeterminationDateMax] = [unpaid].[AccrualDeterminationDate]
LEFT JOIN
(SELECT [SectionID],
[PastDueFeeAmount] = SUM([PastDueFeeAmount])
FROM
[dbo].[INV_FacilityFeeAccrual]
GROUP BY [SectionID]) pastdue
ON [dates].[SectionID] = [pastdue].[SectionID]
UNION
SELECT [isi].[InvoiceID], [ii].[DueDate], [SubInvoiceID] = [isi].[ID], [INV_FacilityID] = [if].[ID], [if].[FacilityID],
[FacilityFeeID] = NULL, [il].[LoanID], [isi].[PortfolioID], [isi].[Portfolio],
[PaymentType] = [isis_loan].[SectionType], [Name]
= [il].[Name], [ReceivedAmount], [CurrentDueAmount], [PastDueAmount] = CASE WHEN ISNULL([ReceivedAmount],
0) > 0 THEN [PastDueAmount] + ISNULL([ReceivedAmount],
0) WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN 0 ELSE [PastDueAmount] + ISNULL([ReceivedAmount],
0) END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[PastDueAmount] < 0 THEN 0 ELSE [PastDueAmount]
END,
[PaidAmount] = CASE WHEN [isis_loan].[SectionTypeCode]
= 'LOAN_PRIN' THEN 0 ELSE CASE WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN - ([PastDueAmount] + ISNULL([ReceivedAmount],
0)) ELSE 0 END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[PastDueAmount] < 0 THEN - [PastDueAmount]
ELSE 0 END END,
[AmountDue] = CASE WHEN [isis_loan].[SectionTypeCode]
= 'LOAN_PRIN' THEN [CurrentDueAmount] ELSE [unpaid].[AmountDue] END, [ID] = [il].[LoanID]
FROM [dbo].[INV_SubInvoice] isi JOIN
[dbo].[INV_Invoice] ii ON [isi].[InvoiceID]
= [ii].[ID] JOIN
[dbo].[INV_Facility] [if] ON [isi].[ID] = [if].[SubInvoiceID]
JOIN
[dbo].[INV_Loan] il ON [if].[ID] = [il].[INV_FacilityID]
JOIN
(SELECT [sis_loan].[ID],
[sis_loan].[SectionTypeCode], [SectionType] = [st_loan].[Name], [sis_loan].[INV_LoanID]
FROM
[dbo].[INV_SubInvoiceSection] sis_loan JOIN
[dbo].[INV_SectionType] st_loan ON [sis_loan].[SectionTypeCode] = [st_loan].[Code]
WHERE [INV_LoanID]
IS NOT NULL AND [StatusCode] = 'BILL') isis_loan ON [il].[ID] = [isis_loan].[INV_LoanID] JOIN
(SELECT [iffa].[SectionID],
[AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]),
[AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[ExpectedPrincipalAmount]),
[ReceivedAmount] = SUM([ReceivedPrincipalAmount])
FROM
[dbo].[INV_LoanPrincipalAmortization] iffa
GROUP BY [iffa].[SectionID]
UNION
SELECT [iffa].[SectionID],
[AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]),
[AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedInterestAmount]),
[ReceivedAmount] = SUM([ReceivedInterestAmount])
FROM
[dbo].[INV_LoanCashInterestAccrual] iffa
GROUP BY [iffa].[SectionID]
UNION
SELECT [iffa].[SectionID],
[AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]),
[AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedInterestAmount]),
[ReceivedAmount] = SUM([ReceivedInterestAmount])
FROM
[dbo].[INV_LoanPIKInterestAccrual] iffa
GROUP BY [iffa].[SectionID])
dates ON [isis_loan].[ID] = [dates].[SectionID] LEFT JOIN
(SELECT [AmountDue]
= [UnpaidPrincipalAmount], [SectionID], [AccrualDeterminationDate]
FROM
[dbo].[INV_LoanPrincipalAmortization]
UNION
SELECT [AmountDue]
= [UnpaidInterestAmount], [SectionID], [AccrualDeterminationDate]
FROM
[dbo].[INV_LoanCashInterestAccrual]
UNION
SELECT [AmountDue]
= [UnpaidInterestAmount], [SectionID], [AccrualDeterminationDate]
FROM
[dbo].[INV_LoanPIKInterestAccrual]) unpaid ON [dates].[SectionID] = [unpaid].[SectionID] AND
[dates].[AccrualDeterminationDateMax] = [unpaid].[AccrualDeterminationDate]
LEFT JOIN
(SELECT [PastDueAmount]
= SUM([PastDuePrincipalAmount]), [SectionID]
FROM
[dbo].[INV_LoanPrincipalAmortization]
GROUP BY [SectionID]
UNION
SELECT [PastDueAmount]
= SUM([PastDueInterestAmount]), [SectionID]
FROM
[dbo].[INV_LoanCashInterestAccrual]
GROUP BY [SectionID]
UNION
SELECT [PastDueAmount]
= SUM([PastDueInterestAmount]), [SectionID]
FROM
[dbo].[INV_LoanPIKInterestAccrual]
GROUP BY [SectionID]) pastdue
ON [dates].[SectionID] = [pastdue].[SectionID]
UNION
SELECT [isi].[InvoiceID], [ii].[DueDate], [SubInvoiceID] = [isi].[ID], [INV_FacilityID] = [if].[ID], [if].[FacilityID],
[FacilityFeeID] = NULL, [il].[LoanID], [isi].[PortfolioID], [isi].[Portfolio],
[PaymentType] = 'PIK Interest Applied', [Name]
= [il].[Name], [ReceivedAmount], [CurrentDueAmount] = - [dates].[CurrentDueAmount],
[PastDueAmount] = - CASE WHEN ISNULL([ReceivedAmount],
0) > 0 THEN [PastDueAmount] + ISNULL([ReceivedAmount], 0) WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN 0 ELSE [PastDueAmount] + ISNULL([ReceivedAmount],
0) END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[PastDueAmount] < 0 THEN 0 ELSE [PastDueAmount]
END, [PaidAmount] = - CASE WHEN ISNULL([ReceivedAmount], 0)
< 0 THEN /* We bring past due to zero and
apply rest to current. */ CASE WHEN [PastDueAmount] + ISNULL([ReceivedAmount], 0)
< 0 THEN - ([PastDueAmount] + ISNULL([ReceivedAmount],
0)) ELSE 0 END WHEN ISNULL([ReceivedAmount], 0) = 0 AND
[PastDueAmount] < 0 THEN - [PastDueAmount]
ELSE 0 END, [AmountDue] = - [AmountDue], [ID] = [il].[LoanID]
FROM [dbo].[INV_SubInvoice] isi JOIN
[dbo].[INV_Invoice] ii ON [isi].[InvoiceID]
= [ii].[ID] JOIN
[dbo].[INV_Facility] [if] ON [isi].[ID] = [if].[SubInvoiceID]
JOIN
[dbo].[INV_Loan] il ON [if].[ID] = [il].[INV_FacilityID]
JOIN
(SELECT [sis_loan].[ID],
[sis_loan].[SectionTypeCode], [SectionType] = [st_loan].[Name], [sis_loan].[INV_LoanID]
FROM
[dbo].[INV_SubInvoiceSection] sis_loan JOIN
[dbo].[INV_SectionType] st_loan ON [sis_loan].[SectionTypeCode] = [st_loan].[Code]
WHERE [INV_LoanID]
IS NOT NULL AND [StatusCode] = 'BILL' AND [sis_loan].[SectionTypeCode] = 'LOAN_INT_PIK') isis_loan ON
[il].[ID] = [isis_loan].[INV_LoanID] JOIN
(SELECT [iffa].[SectionID],
[AccrualDeterminationDateMax] = MAX([iffa].[AccrualDeterminationDate]),
[AccrualDeterminationDateMin] = MIN([iffa].[AccrualDeterminationDate]), [CurrentDueAmount] = SUM([iffa].[AccruedInterestAmount]),
[ReceivedAmount] = SUM([ReceivedInterestAmount])
FROM
[dbo].[INV_LoanPIKInterestAccrual] iffa
GROUP BY [iffa].[SectionID])
dates ON [isis_loan].[ID] = [dates].[SectionID] LEFT JOIN
(SELECT [AmountDue]
= [UnpaidInterestAmount], [SectionID], [AccrualDeterminationDate]
FROM
[dbo].[INV_LoanPIKInterestAccrual]) unpaid ON [dates].[SectionID] = [unpaid].[SectionID] AND
[dates].[AccrualDeterminationDateMax] = [unpaid].[AccrualDeterminationDate]
LEFT JOIN
(SELECT [PastDueAmount]
= SUM([PastDueInterestAmount]), [SectionID]
FROM
[dbo].[INV_LoanPIKInterestAccrual]
GROUP BY [SectionID]) pastdue
ON [dates].[SectionID] = [pastdue].[SectionID]

I need help with controlling two .swf's from third.

Hi, thanks for reading!
I need help with controlling two .swf's from third.
I have a problem where I need to use a corporate designed
.swf in a digital signage solution, but have been told by the legal
department that it can not be modified in any way, I also can't
have the source file yada yada. I pulled the .swfs from their
website and I decompiled them to see what I was up against.
The main swf that I need to control is HCIC.swf and the
problem is it starts w/ a preloader, which after loading stops on a
frame that requires user input (button press) on a play button,
before the movie will proceed and play through.
What I have done so far is to create a container swf,
HCIC_container.swf that will act as Target for the HCIC.swf, and
allow me to send actionscript to the file I'm not allowed to
modify.
I managed to get that done with the help of someone on
another forum. It was my hope that the following script would just
start HCIC.swf at a frame past the preloader and play button, and
just play through.
var container:MovieClip = createEmptyMovieClip("container",
getNextHighestDepth());
var mcLoader:MovieClipLoader = new MovieClipLoader();
mcLoader.addListener(this);
mcLoader.loadClip("MCIC.swf", container);
function onLoadInit(mc:MovieClip) {
mc.gotoAndPlay(14);
But unfortunately it didn't solve my problem. Because there
is a media-controller.swf, that is being loaded by HCIC.swf that
has the controls including the play button to start HCIC.swf.
Here's a link to a .zip file with all 3 .swf files, and all 3
.fla files.
http://www.axiscc.com/temp/HCIC.zip
What I need to do is automatically start the HCIC.swf file
bypassing the pre-loader and play button without editing it or the
media-controller.swf in anyway. So all the scripting needs to be
done in HCIC_container.swf.
I know this is confusing, and its difficult to explain, but
if you look at the files it should make sense.
ActionScripting is far from my strong point, so I'm
definitely over my head here.
Thanks for your help.

Got my solution on another forum.
http://www.actionscript.org/forums/showthread.php3?t=146827

NEED HELP! - Installing Camera raw presets from USB Stick

NEED HELP! -installing Camera raw presets from USB Stick.
I am attempting to install the Camera Raw Presets.
It says to put them into User Name/Library/Application Support/Adobe/CameraRaw/Settings...
When I get to CameraRaw the ONLY folders in there are CameraProfiles & Lens Profiles.
I have searched everywhere looking for a CameraRaw-Settings folder and cannot find one.
I have latest version of CameraRaw installed and still no settings folder.
I even attempted to find it by looking in camera raw where it has saved the custom settings I made as presets and it shows that they are saved but will not show me where.
I am using CS5 specifically Photoshop v12.0.4 and Bridge. I have Lightroom 4. I have iMac OS 10.7.3
Do I need to reinstall Camera Raw and how do you do that?
Will I then lose my presets that I made in CameraRaw?
Thanks for your help

Here is a note from the ACR 7.1 beta release. http://labs.adobe.com/technologies/cameraraw7-1/?tabID=details
Perhaps this answers question.
Frequently Asked Questions
Why is it no longer required to place the plug-in file in the specified directory on my hard drive?
The Camera Raw update process has grown to include lens profile and camera profile files which are easiest to install via a single installer process instead of updating several different directories manually.

Need help trying to transfer my information from one iphone to another

need help trying to transfer my information from one iphone to another

If you are restoring from an icloud backup you are going to have to erase a content and setting and while in the setup prompts you will get the option to restore from an icloud back...that's the only time you will get the option to restore from an icloud back and that's during setup

I lost my ipod I really need help to find it. Im from other country and i cant buy another one. Is not connected to internet

I lost my ipod I really need help to find it. Im from other country and i cant buy another one. Is not connected to internet

There is nothing anyone can do.
Sorry.
You will have to keep looking for it

30p with a Canon XA10 - need help with Final Cut 7 "FIELD DOMINANCE" setting and an explanation of "drop frames". Thank you!!

I shot footage using a Canon XA10 and there are issues with the HD quality not looking as crisp as it should. I am trying to make sure the settings in Final Cut are right. Need help confirming what should be in "Field Dominance" --- have seen discussions about making sure it's set to "none" but I'm confused as to what to do.
Also someone suggested I use "drop frames" to change from 30p to 24p within Final Cut. He couldn't explain how to do it so any input appreciated as well as any thoughts on whether this is a good option to try.

If you're shooting 30p, field dominance should be set to none. Since you need to use log and transfer to bring this material in to fcp, I would assume it would be set correctly automatically. Are you sure you've set the camera properly?
Drop frames will not change 30 p to 24p. Dropframe timecode simply refers to the number assigned to each frame which drops an occasional number (not any frames) so the timecode duration is the actual duration, since 30p videoi is actually 29.97 frames per second which each frame assigned a timecode number.
This is very basic video stuff and requires some basic knowledge of video. Wikipedia is a pretty good resource for much of this stuff plus there are lots of great resources on the web. Look up interlaced and progressive video, 24p and 30p.
And as far as judging quality, you can only get an accurate view of the quality in fcp when you have a video card attached to a video monitor. The viewer and canvas are only an approximation of what the quality is. Minimally, set the canvas or viewer to 100% to get a better approximation of the quality.

Trying to delete "submit" button. Tried unsucessfully 5 times. Need help and want to start over.

I created a pdf that I just wanted people to be able to fill in, download, print out and then mail to me. I followed the instructions from a previous acrobat expert who replied to me yesterday and that did not work. Now, I've tried this 5 times and the system has blocked me out unless I pay for your advanced system which is $143. Please help
Re: Want to delete the "submit" link on a pdf
created by Lucia Lao in FormsCentral - View the full discussion
Hi,
I believe this is a form that you created with FormsCentral and then you downloaded/saved as PDF via the "Save Submission-Enabled PDF" button via the Distribute Tab.
Please select via FormsCentral app main menu:
- File -> Save As PDF Form... and then
- when you get the dialog "Would you like your PDF form to collect responses online in the "View Responses" tab?" select "Don't Collect Responses" button.
This will save the PDF form without the Submit button/link.
Thanks,
Lucia
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5218029#5218029
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: [http://forums.adobe.com/message/5218029#5218029]
To unsubscribe from this thread, please visit the message page at [http://forums.adobe.com/message/5218029#5218029]. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in FormsCentral by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

The instructions Lucia gave you were correct. It seems you have a Basic trial account (5 forms). You can just delete the forms you are not using so you can create more. Can you explain in more detail how those instructions above didn't work? I think there is some confusion so any details you can provide will help clear it up.
Randy

Need Help Urgently - Want to Load Time Data Automatically into Oracle HRMS

Hi All,
I am on my 1st Oracle HRMS project and I need urgent help on HOW TO load Time (IN/OUT) Data from a MS Access database which is populated by a Biometric Hand Geometry System.
And we need to do it in real time as the data inserted in the MS Access Database we need to pull that into Oracle HRMS for Payroll purposes.
If somebody can help me in this I'll greatly appreciate that.
Thanks, AGAIN IT IS VERY URGENT
Zee

Zee,
Let's go back to your core requirement "load Time (IN/OUT) Data from a MS Access database which is populated by a Biometric Hand Geometry System".
Questions:
1. Is this time data to be used to pay a person through Oracle Payroll?
2. What legislation (country) is this for?
3. Are you using Oracle Time and Labor (OTL) as the front-end or do you intend to enter the data directly into Oracle Payroll?
See the following OTL documents:
MetaLink Note 369022.1 - How Can Hours Worked Be Imported into OTL From Third Party System?
MetaLink Note 223987.1 - Oracle OTL HXC TimeStore Deposit API
MetaLink Note 283593.1 - Formatting an Exported Timecard Template using Microsoft Excel
Regards,
Greg

Populate fields from a php script

Hi,
I am trying to populate text fields from a PHP script right into Acrobat Reader.
Lets not talk about database just yet, I just want to know how to take a variable in PHP right to the livecycle designer form.
I have seen many things like submitform(), using http posts, etc but I cant get it to work.
Thank you in advance.

If you want to fill the LiveCycle Designer form, then you need to render it with the datafile.
The datafile can be an XML file or a webservice or Database.
You cannot directly fill the PDF from a PHP script. What you can do is, have a LiveCycle Process created in Workbench and then invoke the Process from PHP application by passing the information. The Livecycle process will merge the data with the template and return the PDF to the client application.
There is an other feature in Acrobat PRO that you can import an XML file directly into a PDF but that is a manual effort. You can not link that to a PHP Script.
Thanks
Srini

Need help in creating Knowledge module to aggregrate source data.

Hi Guys,
I am new to ODI and I am trying to create a Knowledge module. I went through the docs relating to Knowledge modules and APIs, so hopefully did my home work, I still find writing KM to be very challenging for the scenario, I have.
The following is my scenario.
I have two tables Employee and Department. Employee is the source and Department is the target. I need to sum salaries of all the employees belonging to a given department. And then insert the data into Department table.
Structure of the tables is as follows:
Employee(Source Table name)
Employee_id
Salary
Dept_id
Department(Target table name)
id
total_salary
Both target and source are on the same server. The user of this KM would drag and drop both source and target tables into interface and then map the columns. In the above case, Dept_id to id and salary to total_salary and then use this IKM. And off-course the user would indicate what columns would be aggregated on and what would be used as group by. One way to tag that, would be to use those UD1,UD2 tags in target column properties. (If there is another way to tag a column to indicate a column to be used for aggregation and a given column to be used in group by during run time in source, please let me know)
I choose to write IKM for this.
The challenging part is that I am having hard time figuring out the columns of source table as to what column should be used as group by and what column to be aggregated on. Since the tags are defined on Target columns and not on source columns. So have to figure out the appropriate columns through the mapping at run time.
The following is what I am planning to write in (Insert new rows ) command. And the part where I need help is how to compose select statement.
iinsert into <%=odiRef.getTable("L","TARG_NAME","A")%>
<%=odiRef.getColList("", "[COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
<%=odiRef.getColList(",", "[COL_NAME]", ",\n\t", "", "((INS and TRG) and REW)")%>
Select
source.column1,sum(source.column2) from <%=odiRef.getFrom()%> GROUP BY source.column1
Thanks.

I did try as per your advise.
Filter is not making a difference. Irrespective of me adding a filter or not, ODI generates a sql that has GROUP BY , just by looking at SUM(SALARY).
Coming back to the main issue, this does do what I wanted to do. I was planning on using a custom KM. But I guess, this is as good as custom KM, since the work done in an interface (assuming a custom KM exists) by going through either route is the same, so I can live with this approach.
Thanks for the help.

Need help with EXS24 "read velocity range from file name"

I am trying to import 127 drum samples to a single key using the option shown here. The option says "Map to key dropped on and read velocity range from file name". I can find no documentation in the manuals on how to do this. What is the syntax required in the file name to make this work? I need to do several of these imports. The capability is cleary there, but I need help on how the file name should be formatted. My thanks to anyone who can help.

Hi
Not a direct answer to your question, but if you are doing a lot of sample mapping etc, you may want to check out Redmatica's KeyMap Pro or the simpler Keymap 1:
http://www.redmatica.com
CCT

I need HELP! I want to populate fields from a data connection...

Similar Messages

Maybe you are looking for