I need help printing with HP laserjet 2200 and OS 10.6

I need help setting up my HP laserjet 2200 and OS 10.6 -- I've downloaded and installed all the software and still can't print.

Hey jeo1951,
If you haven't already, try running through the recommended steps in the following article:
Mac 101: Printing (Mac OS X v10.6)
http://support.apple.com/kb/HT3771
It should help you set up your printer.
Welcome to Apple Support Communities!
All the best,
Delgadoh

Similar Messages

  • Cannot print with HP Laserjet 2200 on network

    I run software update periodically and downloaded the HP driver update when it was offered.
    I uninstalled the Laserjet 2200 that worked with 10.5.8 in the print and fax system preferences and reinstalled it. It is recognized and I get the correct image for the printer, but when I try to print it pauses, I resume printing and it thinks a little and pauses again.
    I chose the Laserjet 2200 printer driver, but it does the same with a generic printer driver and the offered alternative Gutenprint driver.
    Other users on the network running 10.5.8 have no trouble printing to this printer.
    Thank you

    Getting it to work with Windows is super-easy. You'll need to install the printer's drivers and Bonjour for Windows ( http://www.apple.com/downloads/macosx/apple/windows/bonjourforwindows.html ). Install both of those, open Bonjour, select the printer, done.
    I have no experience with Linux, sorry.
    Michael

  • Can not Print with HP LaserJet 5000 and Epson AcuLaser C9100

    I am using MacBook Pro 2.3 GHz Intel Core i7 with Mac OS X (10.6.6)
    I already install the latest print driver from the Apple Software Update website.
    The driver for HP is Ver. 17.5 & for Epson is Ver. 5.2
    I connect two of the printer to my Belkin Surf N300 wireless N Router with ethernet cable.
    The error when print to HP LaserJet 5000 is as follow:-
    Unable to get printer status (Not Implemented)!
    Network host 'x.x.x.x' is busy; will retry in 30 seconds...
    This error can stay forever if I do not delete the print job
    The error when print to Epson AcuLaser C9100 is as follow:-
    Printer not responding
    This error can stay forever if I do not delete the print job
    Previously I can print with my emac with OS X 10.4.10, but now I can not print with 2 of my printer.
    My 2 printer are in good condition, so this is not the printer problem.
    Please, do anyone know how to fix this problem fast, because I need to use this two printer for my business.
    Thanks in advance.

    That is not what Greg needs to know. That is just the way that the IP addresses are assigned to the printers.
    Your problem is probably that the printers were probably originally found by AppleTalk. AppleTalk is not included in Snow Leopard. If the printers support Bonjour, they should be found that way. Otherwise, you have to use other methods.
    How did you add your printers on the new computer? If you delete them from Print & Fax, how would you add them again?

  • Need help - Print Menue in Acrobat Pro and Standard

    Hello,
    at first, i have to apologize for my bad englisch because I'm german.
    I downloaded a Trial of Acrobat pro and there I hava an extended Print menue where I can choose individual Color Profiles.
    There is an image attached.
    But I don't really need the Acobat pro Features, because I need Acrobat only for Color Printing on my Printer. And it ist expensive.
    So my Question to you is: Is this extended Print menue also in Acobat 9 Standard?
    There is no Trial, so that I hope, that someone can help me.
    Can I also set this settings in Acrobat 9 Standard?
    Thank you very much for helping me with my buying decision.
    Greetings from Munich
    Sebastian

    The Advanced Print menu in 9 Standard does not have all of the options that are in your screen shot.
    Checked with a coworker who has 9 Standard, and the options are much more limited. (I have 8 Pro).
    Bad news is you would need 9 Pro.
    Saw this the other day; sorry for the slow answer, good luck.

  • Need help recording with two linked firepods and an outboard mixer

    Hi!
    Well I've been using Logic for a couple of years but always stayed "in the box".
    Now that I started working out of the box I encountered a strange problem. Let me explain...
    Since recently I have an analog Soundcraft Ghost mixer and two firepods. I linked the two firepods (aggregate device) and recorded 16 tracks into Logic. I sent these back to the mixer through the outputs of my firepods (I used the I/O plugin on each track to get a mono output).
    I made the whole mix on the mixer and now I want to record that mix back into logic (in order to have a Stereo mix ready for mastering).
    I thought all I had to do was create a new stereo audio track in Logic (choose input i.e. 1-2), connect the master output from the table to input 1-2 on my firepods, set the gain on the preamps. Arm the track, hit record.
    Now the problem I have is that what is recorded sounds reeeaaaally strange. It's like distorted or some kinda feedback. Bit difficult to explain. But it sure doesn't sound right at all...
    Does anyone knows what the problem could be?
    Could it be that with the firepods you can't use an input if you allready use it's output?
    If you need any more info, let me know!
    By the way, I'm working on a Macbook Pro 2,4 with osx10.5.6 and Logic Pro 8.0.2
    Greetz,
    NLS

    The problem sounds like you have a feedback loop between the outputs and the input. Here's my suggestion:
    1 Turn the Mixer control on the Firepods all the way to the right, to make sure the Input signal is not mixed back in to the outputs
    2 Mute the stereo Input channel that you're recording on (in Logic) before you arm the Record button
    3 After you have recorded your mix into Logic, disarm the Record button, un-mute and solo the channel, then play back

  • Need help to Settings Apple iMAC 2012 and HP LaserJet 1100.

    Need help to Settings Apple iMAC 2012 and HP LaserJet 1100.
    I purchased a imac, 2012, before there was Windows 7. I have the HP LaserJet 1100 and Print Servers Trendnet TE100 P21, with Windows 7 it ​​worked, but with MAC OSX 10.8 does not want to, do not go printing. Could help with the setting?
    Нужна помощь в настроке Apple iMAC 2012 и HP LaserJet 1100.
    Я купил imac 2012, до этого был Windows 7. У меня есть принтер HP LaserJet 1100 и принтсервер Trendnet TE100 P21, с Windows 7 все работало, но с MAC OSX 10.8 работать не хочет, не идет печать. Могли бы помочь с настройкой?

    привет Roman,
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7/10.8 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.
    Mac OS X: О сброса системы Печать ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7/10.8 инструкции ...
    В System Preferences> Печать и факс, правой кнопкой мыши или Control + Click на боковой панели списка принтеров, выберите Сброс системы печати.
    если вы держите опцию и нажмите кнопку "-" на вкладке он сбрасывает систему печати.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Безопасная загрузка с HD, (Удержание нажатой клавиши Shift нажатой при загрузке), запустите Disk Utility в Приложения> Утилиты, затем выделите диск, нажмите на ремонт разрешения.
    Любые устройства, которые ранее появились в списке принтеров и факсов список необходимо будет добавить снова после перезагрузки системы печати.
    Сброс системы печати в Mac OS X 10.5.x + + +
    1. Для сброса системы печати в Mac OS X 10.5.x, выполните следующие действия:
    2. Выберите Системные настройки в меню Apple.
    3. Выбери для печати и факса в меню Вид.
    4. Управление кнопкой мыши на список принтеров в левой части окна, затем выберите "Сброс системы печати" из контекстного меню. Если вы не видите списка принтеров, управление кнопкой мыши на текст "Нажмите, чтобы добавить + принтер или факс" и выберите "Сброс системы печати ..." В качестве альтернативы, если у Вас уже есть один или несколько принтеров в списке, можно Option-нажмите кнопку "-" (Удалить принтер) кнопки.
    http://support.apple.com/kb/ht1341
    Перезагрузку.

  • How to print on HP LaserJet 2200 over Ethernet?

    Hi,
    I did an upgrade to Snow Leopard and would like to print on a HP LaserJet 2200 over Ethernet. OS X and the HP printer drivers are up to date now.
    The printer has been cold reset and on the configuration print out there's the IP address 0.0.0.0
    Now my question is how to get this printer to work with Snow Leopard over Ethernet? I did not find a tutorial how to assign an IP address to the printer first so I got stuck.
    Could you give me a hint where I should start with the configuration first?

    OK, now the printer works
    I reset the router and checked if DHPC is running.
    I reset the printer (hold down the GO button, turn the printer on and continue to hold the GO button for five to ten seconds).
    Checked at router that the printer is visible as network device.
    At the router I assigned a fixed IP address to the printer.
    At OS X System Preferences > Printer I added a new printer with "HP Jetdirect - Socket", the fixed IP address and the correct printer driver "HP LaserJet 2200".
    Now the printer has been recognized well by the system (Tray 3, Duplex and printer RAM) and printing works.
    THANKS.

  • Need to print with out comma

    Hi all,
    My table is loaded like this 123,678 .00 .I need to extract the data without comma like this 1234678.00
    can any one help me to resolve this issue?
    Thanks in advance.

    You can do this.
    data: str(15) type c value '123,678.00'.
    translate str using ', '.
    condense str no-gaps.
    ABAP related questions should be posted in the ABAP forum. 
    As I see you have done.
    need to print with out comma
    Regards,
    Rich Heilman
    Message was edited by: Rich Heilman

  • AutoCAD 2009 crashes when printing with HP Laserjet CP1525nw via wireless connection

    Printing to CP1525nw via wireless connection crashes AutoCAD 2009 on a WIndows 7 Home OS + Sony VAIO VPCL21M1E
    Works fine printing from any other application.

    I'm facing the same problem but, i'm AutoCAD 2012 and it crashes when printing with HP Laserjet CP1525n via USB or network cable

  • Can not print with HP LaserJet 6L since the upgrade to Mavericks.

    Can not print with HP LaserJet 6L since the upgrade to Mavericks. Any alternative driver for this printer?

    I have an HP LaserJet 5P and had the same problem. My LaserJet is connected to a D-Link ethernet print server, then to an Airport Express to support wireless printing.
    As recommended in earlier posts, I first downloaded the Gutenprint HP drivers at Sourceforge, version 5.2.9 That did not work. Then found the reference to the Apple kb here: http://support.apple.com/kb/dl907
    Downloaded these drivers. When setting up the printer, I got the autoselect option for Generic Postscript Printer and used that. Printer worked, but printed out garbage. I then deleted the printer, and this time selected the HP LaserJet 5P CUPS + Gutenprint v.5.2.9 THAT WORKED! I don't know if was the combination of downloading the drivers from Sourceforge and the Apple kb, or just the Apple kb that solved the problem, but I'm glad this is now sorted.
    I was a bit surprised when I hit this snag to begin with because the last upgrade I did from Lion to Mountain Lion, I did not have this issue. It was seamless.

  • I have tried everything I know to retrieve the iPhoto Library app.  I detest this new Photo app, which obviously wasn't designed with photographers in mind.  I desperately need help in retrieving the old app and have not been able to do it so far.

    I have tried everything I know to retrieve the iPhoto Library app.  I detest this new Photo app, which obviously wasn't designed with photographers in mind.  I desperately need help in retrieving the old app and have not been able to do it so far.  I have gone to my app folder and tried to update my iPhoto Library.  I have gone to my trash and brought it over to my desktop and still cannot use it.  Please help!

    Try this fix discovered by User photosb189:
    From Finder, hold down the option key on your keyboard and click on the Go menu at the top of the screen
    Select Library from the drop down menu
    Then navigate to Application Support > iLifeAssetManagement > assets
    Right click on the 'sub' folder and choose Compress
    Drag the resulting zip file to your Desktop (as a backup)
    Go to your System Preferences and choose iCloud
    Turn OFF the iCloud Photos option
    Go back to Library > Application Support and DELETE the iLifeAssetManagement folder
    Now, in System Preferences, turn the iCloud Photos option ON
    iPhoto should now be able to launch. Give it enough time to re-download your Photo Stream content. if you are missing any of your My Photo Stream photos (more than 30 days old), unzip the sub folder on your desktop and drag that into iPhoto.

  • I need help syncing my contacts between Outlook and iPhone using iTunes. I followed the steps given and ended up with just email addresses showing in my contacts even though I have phone numbers and snail mail in my Outlook Contacts. Using  Windows 7

    I need help syncing my contacts between Outlook and iPhone using iTunes. I used the knowldge document and set it up to transfer my Outlook contacts to the iphone using itunes.
    In contacts on the iphone I only see the email addresses.
    Yet in Outlook I have email, snail mail and phone numbers.
    I followed the knowledge document from iphone.
    I did it once, didn't work so deleted all the contacts from the phone and tried again. Same result. I have a PC using Windows 7 64 bit.

    You can't access an Exchange account via ActiveSync with the Address Book and iCal on your Mac.
    You can access a MM account with Outlook on your PC at work and keep your MM email account server stored mailboxes synced between your PC at work, your iPhone, and the MM "cloud". Not sure about syncing MM contact info and calendar events with Outlook at the same time with an Exchange account.
    This will not provide for syncing your Exchange account contact info and calendar events with the Addresss Book and iCal on your Mac because the accounts are separate.
    You can access an Exchange account and a MM account at the same time with the iPhone's mail client, and sync contact info and calendar events over the air with both accounts at the same time. You can view combined contact info or separately for each account, and the same for calendar events.

  • I need help/suggestions with the HTC Rhyme

    Hello,
        I have the HTC Rhyme and I am so unhappy with it.  I hate knowing I have to wait until 2014 until I can upgrade.  I am wondering if anyone else has the issues I have with mine.  1.)  Drops calls alot even when I have all bars.  2.) It is very slow if I try to pull something up online.  3.)  My phone numbers seem to disappear at nothing.  3.)  My phone cuts off randomly without my knowing it.  4.)  My charge never lasts long at all.  In fact I had straight talk before and that phone stayed charged forever and it was a smart phone as well.  5.) My apps disappear as well.  6.) When I am talking to family and friends they are always asking me to repeat myself or I cant hear them. 7.)  Trying to send a picture is like pulling teeth about near impossible for me to do.  8.)  Text messages gets to where they are going sometimes and sometimes not.  9.)  And try to find a decent case for this phone is not easy.  In fact I've not found one yet that I like thats not plastic or silicone.
       Is anyone else having these problems.?? I believe my phone is a lemon if I'm the only one having these problems.  I am not a person to complain about things but even my family and friends say I have a piece of crap for a phone.  What do I do??  Just got the phone in May.

    I totally agree with Ginny.  I have had my phone for about a month.  It won't hold a charge.  Someone suggested turning it off overnight to see if it will take a full charge.  After I did, it wouln't come on.  Still didn't get a full charge.  When I place it in the docking station, it gets so hot I can't hold it to my ear.  It is dropping calls even when I have the full bars.  At times, my phone shows that I am still connected on the call, but the other person can't hear me and hang up.  This is crap.  I can't go until 2014 to get a decent phone.  I want a different phone.  I had a little crappy Samsung Galaxy with TMOBILE and it stayed charged, never over heated, seldom dropped calls and I gave it up for THIS?  Surely you people must have some kind of replacement plan with this phone given all the people that are having the same issues that apparently are not getting fixed.  When I switched from TMOBILE, the guy that helped me with my new phone and plan swore by this phone.  I had done my homework and had seen all the negative responses to the phone, so when I asked him about it during his sales pitch, he assured me everything had been updated and it wasn't happening any longer.  Given that he was a Verizon representative, I believed him.

  • I Need help. I Change My Number and now imessage don t work.

    I Need help. I Change My Number and now imessage don t work.

    Hi Ivonka88,
    Here are some steps to try troubleshooting your issue with, depending on your specific symptoms:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Cheers!
    - Ari

  • Need help on transportable tablespace, after convert and move datafile over

    I need help on transportable tablespace, after convert and move datafile over the target server, How do I plug them in to the ASM instance?
    And How do I start the database ? what controlfile I should use?
    Thanks.

    I got error like this:
    RMAN> copy datafile '/oracle_backup/stage/ar.269.775942363' to '+RE_DAT';
    Starting backup at 29-MAY-12
    using channel ORA_DISK_1
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of backup command at 05/29/2012 17:46:21
    RMAN-20201: datafile not found in the recovery catalog
    RMAN-06010: error while looking up datafile: /oracle_backup/stage/ar.269.775942363
    How to deal with this?
    I deleted all the current target tablespaces including contents. Do I have to do anything to make the database recognize those converted datafiles?

Maybe you are looking for