I need help syncing my contacts between Outlook and iPhone using iTunes. I followed the steps given and ended up with just email addresses showing in my contacts even though I have phone numbers and snail mail in my Outlook Contacts. Using Windows 7

I need help syncing my contacts between Outlook and iPhone using iTunes. I used the knowldge document and set it up to transfer my Outlook contacts to the iphone using itunes.
In contacts on the iphone I only see the email addresses.
Yet in Outlook I have email, snail mail and phone numbers.
I followed the knowledge document from iphone.
I did it once, didn't work so deleted all the contacts from the phone and tried again. Same result. I have a PC using Windows 7 64 bit.

You can't access an Exchange account via ActiveSync with the Address Book and iCal on your Mac.
You can access a MM account with Outlook on your PC at work and keep your MM email account server stored mailboxes synced between your PC at work, your iPhone, and the MM "cloud". Not sure about syncing MM contact info and calendar events with Outlook at the same time with an Exchange account.
This will not provide for syncing your Exchange account contact info and calendar events with the Addresss Book and iCal on your Mac because the accounts are separate.
You can access an Exchange account and a MM account at the same time with the iPhone's mail client, and sync contact info and calendar events over the air with both accounts at the same time. You can view combined contact info or separately for each account, and the same for calendar events.

Similar Messages

I need help Syncing my ipod to my mac. It has music on the mac currently but I want both my ipod music and the mac music together but it says i have to delete my ipod and only have the Laptop music on it. is there anyway to have both?

I need help Syncing my ipod to my mac. It has music on the mac currently but I want both my ipod music and the mac music together but it says i have to delete my ipod and only have the Laptop music on it. is there anyway to have both?

I got a Mac and started buying music on it, and My PC has all of my whole Itunes library which is like 1000+. Well I want to put all of my music on my Mac, But everytime I plug it in and ask it to sync all music it tells me that I have to erase my Ipod and sync in with the music on my Mac... Gosh its so confusing.

My email account got hacked so I changed the password and now when I try to get mail it just says operation can not be completed even though I have typed in my new password what do I do?

My email account got hacked so I changed the password and now when I try to get mail it just says operation can not be completed even though I have typed in my new password what do I do?

Can you acces the the account on another device?
Try contacting your email provider.

Why do my 2 iphones ring at the same time even though they have different numbers?

Why do my 2 iphones ring at the same time even though they have different numbers?

Are they sharing an Apple ID?
On both phones:
Settings > FaceTime > turn iPhone Cellular Calls off

Does an iphone4s become locked to the SIM card that you insert after you follow the steps given to unlock the phone? Thanks a mill

Does an iphone4s become locked to the SIM card that you insert after you follow the steps given to unlock the phone?
I just received the steps by email from meteor and I'm moving to OZ in September. I have the OZ SIM card I intend using over there but I don't want to end up locking the whole phone to the OZ network before I go there.
Any help on this matter would be greatly appreciated

That only happens when you purchase a supposedly unlocked phone from specific stores that say their unlocked but as soon as you insert a sim card they lock to that carrier... a trick (sort of)... that's something totally different than what you are about to do!

My ipad is no longer showing all my videos, even though i have the option set to show all, even those that are in my cloud. I can't do anything to get all my videos to re-appear. any help?

My ipad is no longer showing all my vidoes, even though i have the option set to show all, even those that are in my cloud. Any suggestions??

Close the videos app and launch it again.
To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
if they still don't show up after you launch the app again, try resetting the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Need help creating a bootable dvd for solaris 9 using windows

Ok, I am using windows XP, I have 2 hard drives in my computer and want to load Solaris 9 on my other hard drive. I have downloaded the ziped ISO files from sun.com, I have extracted them (sol-9-u8-ga-x86-dvd-iso-a, sol-9-u8-ga-x86-dvd-iso-b, sol-9-u8-ga-x86-dvd-iso-c, sol-9-u8-ga-x86-dvd-iso-d, and sol-9-u8-ga-x86-dvd-iso-e) Now what? I burned them to a DVD but its not booting to them (I have checked my boot sequence) I figured I would have to make a bootable DVD but I don't know how. All the instructions I am finding are for doing it in Solaris 9. Can someone please give me instructions on what I need to do now that I have downloaded the files or point me to a site that already has the instructions? Also I have Nero 7 Essentials as my DVD burning software.
Thanks

Copy all unzipped pieces into one directory (sol-9-u8-ga-x86-dvd-iso-a, sol-9-u8-ga-x86-dvd-iso-b etc... all 5 pieces)
take command prompt and goto that directory and run the below command
copy /b sol-9-u8-ga-x86-dvd-iso-a + sol-9-u8-ga-x86-dvd-iso-b + sol-9-u8-ga-x86-dvd-iso-c + sol-9-u8-ga-x86-dvd-iso-d + sol-9-u8-ga-x86-dvd-iso-e sol-9-u8-ga-x86-dvd-iso.iso
It will create sol-9-u8-ga-x86-dvd-iso.iso file.
Using any DVD Burner software (e.g. Nero 7 or later), Burn the newly ceated image ( sol-9-u8-ga-x86-dvd-iso.iso) do "Burn Image" (NOT a DATA DVD/CD)
Regards,
Prvn

Splitting the "To" field when crawling an email and then using the "To" field as a refiner with single email addresses

Hi
I am using SP2013 SP1 with the September 2014 CU.
When I crawl an email I use the "To" field subsequently as a refiner.
Unfortunately, if the email has many email addresses in the "To" field, they all appear in the refiner which is not much help if you only want to refine by a single email address.
IS there a way of splitting the list of email addresses in the "To" field into separate email addresses so that the field can be used as a refiner, with each refiner entry having a single email address ?
I have seen articles for SP2010 FAST search, but not for SP2013 Search or do I need to get involved in Content Enrichment / Content Extraction for there appears to be little documentation available on these.
I would have thought this would have been a fairly popular feature.
Regards
Nigel
Nigel Price NJPEnterprises

Hi，
According to your description, my understanding is that the "to"search refiner has many email address when searching the "To" managed property in SharePoint 2013. but you only want to refine by a single email address.
Whether you create custom "To" managed property, and then you can search email address with the "To" managed property.
The refiner value is correspond to the crawel property(column value), when you search different email adress, you would get different refiner values.
If the issue exists, Please offer a screenshot about your issue and tell "To" managed property is mapping to which crawl property.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

The last few photos in my album won't stay in order even though I have them numbered

I have added about 40 new photos to an old album, but the last few will not stay in order. There are over 700 photos in this album and have them numbered consecitivly. I have checked the numbering and have moved them back into position several time, but whenever I close iphoto and reopen it they always move back to the same spot, near the beginning of the album.

I found the problem. I went into view and there it has sort by and I chose Title and that solved my problem. It was weird that this only just started happening and it was only the last few of the Album I was doing.
Now I'm moving my album into imovie and the only problem I'm having so far is that the Ken Burn effect doesn't show what I want it to show on about 10% of the photos. ie, it will pan in on a photo of my mother & father's feet and slowly pan up to the shoulder before the next slide begins. Can you tell me how to adjust the panning so that the subject on the photo is in the imovie?
Thanks, Gordon

HT1212 i've placed my ipod 4th generation in recovery mode by following the steps given in apple supports. now my ipod is stuck on a screen showing a usb cable and arrow pointing upwards and then itunes. what do i do? is this supposed to happen? someone p

I've placed my iPod touch 4th generation in recovery mode by follwing the steps Apple offers in Support. Now my iPod is stuck on a screen that has a picture of a USB cable, an arrow pointing up, and a music note showing iTunes. What do I do now? is This supposed to happen?? Someone, anyone pleaseeeeee help me!!!

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode

My Apple ID always goes to my husbands on MY iPad and is showing OLD Apple ID even though we have separate ones. Can you help

First my husband got an iPad then weeks later I did. When setting mine up we used the same email for my Apple ID - everything was fine until last week when I tried to add an app it wouldn't work with respect to password.
He changed his Apple ID on his iPad
I changed mine and everything was great
Today I try to download an app and it is showing our ORIGINAL Apple ID and both of us can't remember password - plus when we go to reset password the Apple ID that shows is his NEW Apple ID on both of our iPads.
So frustrating

This seems so simple now but what a crazy day. What I ended up doing was updating my ipad (music) from my computer to the ipad and for some reason I decided to click on "The Store" and noticed the OLD email address we used for the ORIGINAL Apple ID
So I changed it and uninstalled the app for Facebook as this is the app that I couldn't update and
Boom
Everything is working on my ipad - when I go to download or update an app it shows the NEW Apple ID.
Hope if anyone else has this problem it helps and the only thing now to hope for is The Canucks win their game tonight
Happy dance

How do i get rid of the annoying wifi connect screen whenever i am in a mall, it pops up even though i have cancelled it many times and revert to 3g

how do i get rid of the annoying wifi connect screen, even after i have rejected and cancelled using it and revert to 3g?

Actually just turn off "Ask to join networks". Settings -> Wi-Fi -> Ask to Join Networks. This way your wi-fi will still work at home or anywhere that you want to use it but you won't get prompted to join unknown networks.

Need help sharing internet connection between pc and mac using airport

Hello
I have a PC with an internal modem that connects to the internet via 3g+. it's got wi-fi as my macbook.
i want to share the internet connection of the pc via wifi (using what is called an "ad hoc" connection ( a pc to pc network)) so that the mac can connect to the pc (via wifi) and use its internet connection.
i've already tried a bunch of things but they don't work, can someone help me or tell me where i can find a GOOD guide to do this? (i've already looked around but i haven't found anything that works)
thanks

Hi. I'm not sure if this helps, but I just found a nice way to do it the other ways around (share the internet from your mac with your pc).
See: http://echeng.com/journal/2009/07/06/encrypted-internet-sharing-between-mac-os-a nd-windows-xp/
Specifically, step 4 and 6 are crucial!:
1. In Mac OS X, enable Internet Sharing to computers using Airport
2. In AirPort Options, select 128-bit WEP encryption and enter a 13-character password
3. In Windows, add a new wireless network
4. Enter the SSID and select WEP encryption with Shared Network Authentication (not Open)
5. Uncheck “The key is provided automatically” and enter the 13-character password
6. In the Authentication tab, be sure that “Enable IEEE 802.1x authentication” is unchecked
The main idea is that MAC-WEP and PC-WEP are not quite the same, so this tweak makes them line up. Perhaps you can do it the other way around from PC to MAC by sort of reversing the idea?
Hope that helps you!

Need help finding a BIOS flash tool and BIOS updates for HP Compaq nc8230 running Windows 7

I put together this laptop. It didnt come with a hardrive, and basically I installed everything from the ground up.
It is an HP Compaq nc8230, IDE Hard drive, Windows 7 32 bit. The BIOS on it is the original one. I've searched far and wide, but to no avail, it seems there's zero support for this model anymore.
Basically it was never intended to go beyond Vista, back in 2004 when this model was introduced.
The reason I am searching for some kind of BIOS update, whether it is BIOS or SMBios is to get the ACPI driver to recognize the primary laptop battery. This is crucial: it only sees both as the travel battery. Other than that, all else is fine.

Hi:
Here is the latest BIOS update for your notebook.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
You cannot use the windows based flash because you installed windows 7, so I provided the link to the DOS based flash.
You need to use a USB floppy drive for this update.
Oh, and the card reader won't work unless you install this updated driver which is not on your PC's support and driver page.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Also, here is the link to your PC's support and driver page...
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodTypeId=321957&prodSeries...

HT201263 I followed the steps given by apple so I could restore my iPod Touch, but a message on my computer that mentioned error 3004. I uninstalled and re-downloaded itunes but still the same thing happened. Any ideas how to fix it?

I've had the iPod for a few months and it worked great. For some reason it went into recovery mode but I have no clue. I've always used the laptop I have with the same wifi. As soon as I plugged by ipod into the computer to recharge the battery it went into recovery mode.
Side note: I know almost nothing about computers.

Error 3004
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.

I need help syncing my contacts between Outlook and iPhone using iTunes. I followed the steps given and ended up with just email addresses showing in my contacts even though I have phone numbers and snail mail in my Outlook Contacts. Using Windows 7

Similar Messages

Maybe you are looking for