I need help with the roto brush tool, please?

whenever I go to roto brush my clip, I start off by making my first stroke. When I do this it changes the layer time, and it is not synced up any more. If I uncheck the render box it goes to the next frame. Whenever I make a stroke, it does not effect the frame I drew on, but the one after. Any help?

Here we go. I have AE CS6. I'm trying to roto scope a bit of footage that is easily longer than 30 seconds. I have windows 7. When I started out roto scoping, it worked fine. At one point I clicked page down and nothing happened. When I clicked it again it went to the next frame as it should have done. Then, when I tried to corrections to the roto scope, nothing happened. No matter where I drew, either using the foreground or background tool, you know the red dot or the green dot, nothing happened. When I push page down it goes to the next frame and everything I drew on the previous frame happened on that frame. Therfore, whenever I use the rotoscope, it is not working on the frame I am drawing on but the one after. When ever I check the render box the view is now the next frame, not the frame I am working on. When I recheck the render box it goes back to the previous frame that I was working in, but nothing was happening. I restarted the roto brush tool to see if that would help. When I make my original line for the foreground there is a short pause, then it acts like the brush should. I noticed in the time line that the layer I was working on sifted over a frame to the right. If I control+z it the history says undo layer time change.
Is that enough information to get some help?

Similar Messages

I need help with the adjustment brush.

When I first started using Lightroom, the adjustment brush worked fine. Now, I will select the adjustment brush, click on the photo I'm editing, and a red circle will appear depending on the circumference I chose. If I look at the thumbnail in the navigation sidebar to the left, the red circle appears as a black circle in that photo. In addition, none of the sliders will work with the exception of the exposure adjuster. However, the effects of adjusting the exposure only appear in the thumbnail in the navigation sidebar; the main image will stay red in the area selected. Does anybody have a clue how to fix this?

Press the [o] key (overlay) to make the red overlay disappear. The black that appears in your thumbnail is likely caused by a very high negative exposure value for the brush. It also sounds like you have the Adjustment Brush panel partially collapesed. On the same line as the word Effect: on the right side is a small black triangle, click on it to expand. These are the sliders that go with the brush - not hte sliders in the basic panel which I suspect you are using.

I need help with the Xcode Dev tools!!!

So I recently got a new iMac and went to install the xcode dev tools on the app store but it only installed Xcode and no other dev tools. How to I get the whole Dev toolset????? I went to the the apple site and downloaded the diskimage and it was still just Xcode HELP PLEASE!!!!!!

I think your using a older version cause it no longer installs under /MacintoshHD/Developer it installs under /Applactions/Xcode as of Xcode 4.3.2
I know I am which is why my post said "If they haven't changed it from the ones for Snow Leopard...". I'm still using 10.6.5.

Help with the horizontal mask tool ,please?

I am still using the trial version of PSE 8. I have read the help section on creating & using the type mask tool. I also looked at the creating type mask tutorial. Hoewever, it does not work for me. I want to use a photo (like the zebra stripes in the tutorial). The font used in the tutorial is Stencil Std. and I don't have that one. I set the font size to 100, but what is typed isn't even close. The font style in the tutorial is set on bold. Mine is set on regular and I can't the menu to drop down to change it. What am I doing wrong?

You need to choose a really fat, chunky font, and set the size as large as it needs to be, which may be much bigger than 100 pts. Bold is available as a faux style via the options bar settings but it only appears in the menu if there is an actual bold font (in other words, if you are using a font which doesn't have a true bold style you may be able to fake it, but you won't see the name as myfont bold).

How can we improve the Roto Brush tool and Refine Matte effect?

If you use the Roto Brush tool and/or Refine Matte effect, let us know how you're using it and what you'd like to see improved.
(We'd especially appreciate it if you gave feedback after you've had a chance to learn how to use the features and try them out on some real work.)
Normally, we like to encourage feedback through the feature-request form, but in this case we'd like to get a more public conversation going.

Hello,
I've been using the Roto Brush and so far I am very impressed. It is much more stable than I anticipated and gets me pretty far with much less work. I'd say I can get my shots 85-90% of the way done with the Roto Brush tools, in a fraction of the time. Bravo to Adobe for such a great tool. I have however, hit one major snag. I am part of a pipeline and I need to render out my mattes and pass them up the chain. When I look at my Roto Brush precomp it is beautiful, the motion blur is perfect and the alpha looks identical when I check that out. However when I render out my tiff sequence and pull it back in to check it, there is bleed in the motion blur. I'm not sure this is a roto brush problem because when I look at the alpha of the roto brush layer and the rendered matte they appear identical. Any suggestions on how to get the bleed out of the blur?
Thanks,
Danielle

Need Help with the Clone Tool

I need help with the clone tool, in that when I clone (let's say grass as example), the new cloned area does NOT come out as sharp as the area selected. It comes out much softer and somewhat blurred. I have the opacity and flow both set at 100%. This is very frustrating since I can not get a true clone.

what "tip" do you have selected? where are you sampling from ( found in top option bar) ALSO make sure MODE is normal
http://helpx.adobe.com/photoshop/using/retouching-repairing-images.html
-janelle

Need help with the Vibrance adjustment in Photoshop CC 2014.

Need help with the Vibrance adjustment in Photoshop CC 2014.
Anytime I select Vibrance to adjust the color of an image. The whole image turns Pink in the highlights when the slider is moved from "0" to - or + in value. Can the Vibrance tool be reset to prevent this from happening? When this happens I cn not make adjustments...just turns Pink.
Thanks,
GD

Thank you for your reply.
Yes, that does reset to “0” and the Pink does disappear.
But as soon as I move the slider +1 or -1 or higher the image turns Pink in all of the highlights again, rather than adjusting the overall color.
GD
Guy Diehl web: www.guydiehl.com | email: [email protected]

I need help with the iPad Remote app to connect to apple TV 2

I need help with the iPad Remote app to connect to apple TV 2 I have the app already on my ipad and when I open it only shows my itunes library and not the small black Apple TV 2 icon! How do i fix this and i know it's something

Get the manual at http://manuals.info.apple.com/en_US/AppleTV_SetupGuide.pdf
 Cheers, Tom

I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

I need help with the photo stream. Everytime I try to open it on my PC it says photo stream is unable and I have tried everuthing to enable it but it doesn't work. Any help, please?

Freezing, or crashing?
ID on the Mac can produce reports that may (or may not) prove helpful in diagnosing the problem. I suspect this is something not directly related to InDesign, and maybe not to any of the Adobe apps directly since you seem to be having a problem in more than one. That often inidcates a problem at the system level.
Nevertheless, it won't hurt to try to gather the reports. You'll find driections for how to generate them, and to post them on Pastebin.com (then put a link to them here) so we can see what's going on at Adobe Forums: InDesign CS5.5 Not Responding
Do you happen to run a font manager? If so, which one, and waht version?

Need help with the session state value items.

I need help with the session state value items.
Trigger is created (on After delete, insert action) on table A.
When insert in table B at least one row, then trigger update value to 'Y'
in table A.
When delete all rows from a table B,, then trigger update value to 'N'
in table A.
In detail report changes are visible, but the trigger replacement value is not set in session value.
How can I implement this?

You'll have to create a process which runs after your database update process that does a query and loads the result into your page item.
For example
SELECT YN_COLUMN
FROM My_TABLE
INTO My_Page_Item
WHERE Key_value = My_Page_Item_Holding_Key_ValueThe DML process will only return key values after updating, such as an ID primary key updated by a sequence in a trigger.
If the value is showing in a report, make sure the report refreshes on reload of the page.
Edited by: Bob37 on Dec 6, 2011 10:36 AM

I need help with the Quote applet.

Hey all,
I need help with the Quote applet. I downloaded it and encoded it in the following html code:
<html>
<head>
<title>Part 2</title>
</head>
<body>
<applet      codebase="/demo/quote/classes" code="/demo/quote/JavaQuote.class"
width="300" height="125" >
<param      name="bgcolor"      value="ffffff">
<param      name="bheight"      value="10">
<param      name="bwidth"      value="10">
<param      name="delay"      value="1000">
<param      name="fontname"      value="TimesRoman">
<param      name="fontsize"      value="14">
<param      name="link"      value="http://java.sun.com/events/jibe/index.html">
<param      name="number"      value="3">
<param      name="quote0"      value="Living next to you is in some ways like sleeping with an elephant. No matter how friendly and even-tempered is the beast, one is affected by every twitch and grunt.|- Pierre Elliot Trudeau|000000|ffffff|7">
<param      name="quote1"      value="Simplicity is key. Our customers need no special technology to enjoy our services. Because of Java, just about the entire world can come to PlayStar.|- PlayStar Corporation|000000|ffffff|7">
<param      name="quote2"      value="The ubiquity of the Internet is virtually wasted without a platform which allows applications to utilize the reach of Internet to write ubiquitous applications! That's where Java comes into the picture for us.|- NetAccent|000000|ffffff|7">
<param      name="space"      value="20">
</applet>
</body>
</html>When I previewed it in Netscape Navigator, a box with a red X appeared, and this appeared in the console when I opened it:
load: class /demo/quote/JavaQuote.class not found.
java.lang.ClassNotFoundException: .demo.quote.JavaQuote.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.FileNotFoundException: \demo\quote\JavaQuote\class.class (The system cannot find the path specified)
     at java.io.FileInputStream.open(Native Method)
     at java.io.FileInputStream.<init>(Unknown Source)
     at java.io.FileInputStream.<init>(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.connect(Unknown Source)
     at sun.net.www.protocol.file.FileURLConnection.getInputStream(Unknown Source)
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
Exception in thread "Thread-4" java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletException(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
java.lang.NullPointerException
     at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
     at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)What went wrong? and how can I make it run correct?
Thanks,
Nathan Pinno

JavaQuote.class is not where your HTML says it is. That is at the relative URL "/demo/quote/".

I need Help with the dynamic link feature in CS3

Hi I was wondering if anyone could help me with an issue I am having? I have the adobe cs3 master collection. Having watched tutorials on the dynamic link feature my version seems not to have the same options as those I have viewed. I wish to send my premiere video creation to encore using dynamic link, however when I click "file" and then "adobe dynamic link" the only options available are about "adobe after effects". I can export to encore however I am only alloowed to export one premiere sequence to one new encore file, I cannot create an encore file and import several premiere sequence into the same encore project. That means currently I can only have an encore creation with one premiere sequence in it, and I have no adobe dynamic link. Any help anyone could offer would be greatly appreciated.

Thanks very much for that guys but my premiere media encoder only lets me export as: MPEG1, MPEG1-VCD, MPEG2, MPEG2 blu-ray, MPEG2-DVD, MPEG2-SVCD, H.264, H.264 blu-ray, Adobe Flash Video, Quicktime, Real Media, Windows Media. Are any of these formats DV AVI?
Am I to export my videos direct to encore or save them elsewhere (e.g desktop). It seems that I cannot export sequences from different premiere projects to the same encore project.
Sorry if any of these questions seem obvious, I am just new to premiere and keen to do things right from the off.
Many thanks again guys.
Date: Tue, 24 Nov 2009 19:32:47 -0700
From: [email protected]
To: [email protected]
Subject: I need Help with the dynamic link feature in CS3
Harm is correct. For SD DVD, exporting as a DV AVI file from Pr will give you good results. Encore's Automatic Transcoding will give you maximum quality for the available disc space.
-Jeff
>

HT4528 Hi I need help with the volume on my phone even on speaker i can barely hear who I am speaking with

Hi I need help with the volume on my phone, even on speaker I can barely hear who I am speaking with . How do I make it louder /

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
-Griff W.

I am needing help with the final steps in restoring my iPod Touch 5

I need help with the final steps in restoring my iPod

I was told that the iPod would automatically go to restore mode when connected to wifi. It did not do that

I need help with the Web Application Certificate

Greets,
The title says it all really. I need help with the Web Application Certificate.
I've followed the instructions from here:
https://www.novell.com/documentation....html#b13qz9rn
I can get as far as item 3.c
3. Getting Your Certificate Officially Signed
C. Select the self-signed certificate, then click File > Certification Request > Import CA Reply.
I can get the certificate in to the Filr appliance but from there I'm stuck.
Any help much appreciated.

Originally Posted by bentinker
Greets,
The title says it all really. I need help with the Web Application Certificate.
I've followed the instructions from here:
https://www.novell.com/documentation....html#b13qz9rn
I can get as far as item 3.c
ok when you have you self signed certificate and you requested an official certificate with the corresponding CSR then you just need to go back to the digital certificates console. To import the official certificate, select the self signed certificate, then click File > Certification Request > Import CA Reply. Then a new windows pops out to select the certificate from your trusted authority from your local hard disk. Find the file (.cer worked for me) and click ok. As soon as you do this in the digital certificates console the self signed certificate will change the information that now it is officially signed. Look at the second column and you should see the name of your trusted authority under "issue from"
I personally had a lot of issues across all platforms. Especially Firefox and Chrome for android. Needed to pack all the root cert, intermediate cert and signed cert into one file and import as CA reply. Not even sure if this is correct now. But at least it works.

I need help with the roto brush tool, please?

Similar Messages

Maybe you are looking for