I need out of my contract without paying ETF!!!

I need to get out of my contract i have had since november 2011 and can no longer afford it. I havent been able to pay my bill for 2 months. I didnt pay it last month and cant pay it this month. I am switching to at&t. I want to get out of my contract without paying a fee. I refuse to pay it. How long will it take before they just shut my service off?? I know it will mess a my credit up a little bit but right now its worth it. Does anybody have any idea how long it will take for them to shut my service off??
P.S. I am the account owner and i have my line and another line on my account and they are both smartphones

Dimetryus wrote:
1. I do want a new phone (Iphone 4S or Samsung Galaxy S2 or S3 without paying retail)
This one would be fulfilled. Though your service won't last long.
2. Im too behind on my bill and it will be hard to pay as i have no way paying the bill anymore but am looking before i switch.
Your AT&T will be prorated, and billed in advance. Don't forget the $35 activation fee. IF you catch it at the bad time you will have to pay for two months of service on your first bill. Since Verizon and AT&T are around the same price give or take $5 and you say you can't pay for the 2 months you missed then I don't see how you can pay the AT&T bill. Best case 1/2 a month and a full month in advance. Worse case 2 months on the first bill + $35.
3. I want to go back to one line but I dont have the money to cancel my 2nd line
Do an AOL with someone. Someone may take over your line depending on the phone on that line.
If I had a way to do that stuff I would definately stay with verizon.
I still don't see the difference. You will jump out of a pan into another pan...
I think it's a few months, before they terminate it, and send you the bill+ ETF. AT&T will do the same... I don't see how you can not afford one carrier and not the other when they are the same price.

Similar Messages

Getting out of my contract

I am so dissatisfied with the customer service that I have received from VZW over the last 10 months or so that I want to get out of my contract. Does anyone have any loopholes/suggestions? I am paying so much money and no one is willing to help me out - all they are interested in is getting my to pay MORE money. 10 years + a VZW customer - I really want out and need to figure out a way so that I can go back to affording my cell phones!

You can call customer service and cancel the contract, and your cell service. You will have an ETF to pay, based on the phone you purchased and how much time you have left in the contract.
If you are asking how to cancel the contract without paying the ETF, the only way would be to transfer the contract to someone else - find someone willing to take over the rest of the contract and then do an Assumption of Liability, turning the account over to them. You'd then be without a phone (unless the one who is taking over the contract has a Verizon phone and doesn't need yours).
That still leaves you with the dilemma of service for the phone you do have ... what phone is it? And can you work the plans to get one that you can afford and still use your current phone? You may be able to change your plan to a more affordable one and still keep your current account and phone...it would be helpful to know what plan and phone you have now so we can suggest ways to reduce your bill.

I bought a song on itunes a while ago and I couldn't back up my ipod because I needed more storage. Once my ipod was updated, ALL of my memory was deleted (since it wasn't backed up) and I couldn't get my song back without paying for it again. Is there a

I bought a song on itunes a while ago and I couldn’t back up my ipod because I needed more storage. Once my ipod was updated, ALL of my memory was deleted (since it wasn’t backed up) and I couldn't get my song back without paying for it again. Is there a way to retrieve it without paying for the second time?

Just follow these instructions:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I need to install Acrobat Pro, already bought, on my new computer. Can't find a download without paying again.

I need to install Acrobat Pro, already bought, on my new computer. Can't find a download without paying again. How can I transfer this license?
And why won't Adobe itself talk to its customers?

Hi Hammerwater Kate,
Welcome to the Adobe Forums!
You can download Acrobat XI Pro from the below mentioned link.
https://www.acrobat.com/en_us/free-trial-download.html?promoid=KBAUF
Thanks
Kapil

Macbook hard drive crashed, i lost windows for mac, bought a disc when i got the mac, no longer have the disc, need my apps, don't wanna pay for it again. know how to get it quick without having to give my mac to the genius bar at apple store overnight

macbook hard drive crashed, i lost windows for mac, bought a disc when i got the mac, no longer have the disc, need my apps, don't wanna pay for it again. know how to get it quick without having to give my mac to the genius bar at apple store overnight?

What is it you need - Windows installer disc or something else? Your question is unclear. Could you be more specific?

I do not remember my rescue email and i do not remember my security questions, what can i do to find out my rescue email without needing to answer security questions? Please help now I am unable to buy or install apps:(

forgot security answers and rescue email how do i find out the rescue email without needing to enter security questions?

Contact Apple support at the appropriate number found in http://support.apple.com/kb/HE57 and ask to speak with someone in account security.

I need to download LR5 again; how do I do this without paying for it again?

I need to download LR5 again; how do I do this without paying for it again?
I had to uninstall due to an error that kept on appearing after I updated to 5.3 (the error is a 0xc000007b error).

You can go to Adobe's website and download the free trial, and then enter your serial number
however, downlaoding again is not necessary. You can use the same disk/download that you used before to install LR.
The 0xc000007b error is fixable via http://helpx.adobe.com/lightroom/kb/error-unable-start-correctly-0xc00007b.html

I bought an LG phone and a $35 dollar plan card. Less than a week later it said I was out of time for texts. Apparently it only gave me minutes, not the plan I wanted. Is there any way I can get the plan without paying again?

I bought an LG phone and a $35 dollar plan card. Less than a week later it said I was out of time for texts. Apparently it only gave me minutes, not the plan I wanted. Is there any way I can get the plan without paying again?

So you bought a plan and used it all and want another one for free? I understand you thought it had more texts or whatnot but they won't do that since you already used the other plan.
That's like going to McDonalds and ordering a double cheeseburger, them giving you a double cheeseburger, you eating it and then realizing you wanted a double quarter pounder and expecting them to give it to you free.

Want to learn how to do Dolby 5.1 without paying for Surcode?

If you have ever been interested in trying Dolby 5.1 in a Premiere Pro project that you can export out to a file or Blu-Ray, it is actually easier than you think. There are some very specific steps you need to take to make it work however and there is one very annoying issue that I have escalated with Adobe, but I have found a workaround that is quite effective. My goal of starting this thread is to help others save time discovering all the trial and error I have gone through and also hope others will chime in with any additional information and help with the elusive problem of getting files to play correctly on the ps3. I may make a video to demonstrate if there is enough interest.
Step 1: Setup Audition and Premiere Pro for ASIO and map speakers
You will need to ensure both Premiere Pro and Audition are setup using ASIO for your audio hardware. ASIO will allow you to directly access your sound cards. Depending on your sound card vendor, you may have to install ASIO drivers. In my case, I have a Creative Labs Titanium and they are installed with the sound card drivers. To select in Audition, go to preferences, click on Audio Hardware and under the device class, select ASIO, and under Device, select your ASIO driver. You may also need to map your channels. Under preferences, select Audio Channel Mapping and select the following:
File Channels      Device Channels
1[L]                     Front L/R
2[R]                     Front L/R
3[C]                     Front C/Sub
4[LFE]                 Front C/Sub
5[Ls]                    Rear L/R
6[Rs]                    Rear L/R
While this may look strange at first, it is pretty straight forward. On the left are the channels internal, and the right are the speakers it will send the sound to. Front L/R actually are actually the individual Left and Right Channels, for some reason they label them both as L/R. When you select the pull-out you will see two entries for Front L/R, the first one is your left channel, the second one is the right channel. The same thing applies to the Front C and Rear L/R labels.
For Premiere Pro, under preferences, choose Audio and select the 5.1 Mixdown type of Front+Rear+LFE. For Audio Hardware, again select your ASIO driver. Under Audio Output Mapping, also select your ASIO driver.
Step 2: Setup your Premiere Pro Project correct.
a) This one took a bit of looking into and I am proud to say I figured it out before Adobe tech support. For some reason my 5.1 channel would play correctly in audition, but would always play back in Stereo through Premiere, even though it was on a 5.1 audio track. So, the important thing to remember is your "Master" audio has to be set to 5.1. There are more sophisticated methods using submixes, but I will add those to this thread once I experiment with that. Anyway, you can't change a sequence after the fact, so create a new Sequence and under the "Tracks" tab, make sure the master is 5.1.
b) Now drag your video track onto the new sequence and it will be on a Stereo track...no problem, under the edit menu, select edit->edit in Adobe Audition, and select either the entire sequence or just that clip.
c) Now click the Multitrack button while in Audition and it will prompt you for a session name. Under Master, choose 5.1.
d) In Audition, in the files tab, drag your .wav file up into one of the tracks. Cool part is there is a little symbol next to the track label that looks like a diving helmet, click on that and a Track Panner window will come up. You can drag the bubbles around and it will visually show you where the sound will appear. By default the stereo will show sound going to the front left and right channels. I usually pull back a bit and let the sound go into the center channel as well. You can move the sound bubbles around and put the sound wherever you want. If you want to turn off a speaker specifically, then click the little lines next to the speaker representations. Anyway, it is pretty intuitive, but as I mentioned, if there is enough interest I will make this into a training video.
e) Drag any other sound files or special effects you want onto the other tracks and you can control where that sound goes as well using the same method as decribed in step d. You will need at least two tracks populated so just drag the same .wav file or add a sound effect or something to another track.
f) When you are ready to send it back to Premiere Pro, from the MultiTrack menu, select Export to Adobe Premiere Pro. When prompted select "Mixdown session to:: and select 5.1 file.(You have to have at least two tracks for this to work).
g) Now choose export and when you are back into Premiere, you can select to have it brought into a new track, or an existing one (just make sure it is 5.1 if you go to an existing one).
h) Now turn off the original stereo track and when you play it back, it should play back in surround sound in Premiere. Choose Window->Workspace->Audio and it will bring up the mixer window. When you play it, for your 5.1 tracks you can see all 5 channels and which channels are being played.
i) So far so good, the ultimate goal of course is to somehow get it exported to play. If you want to play it on your computer, you have a few choices. You can use Quicktime, H.264 and there are probably a few others. I had the best luck exporting in H.264(the non blu ray option), make sure to export channels to 5.1 and it plays back nicely in Windows Media Player as well and iTunes and uses .aac as the audio codec. It does not play back correctly in Quicktime however, it will play back in Stereo, although I think there is an update that corrects this now (haven't tested it yet).
j) Ok, that is nice, but my goal was to be able to play it back on my PS3 in my media room, and it didn't recognize any of the 5.1 formats I exported (and I tried several), I couldn't find a combination that it would play at all (video or audio), so it would be great if someone could add to this thread if they know some specific settings that would work (stereo or 5.1). I would really like to be able to serve up the video over the network in 5.1, but I am not hopeful that I will get there...perhaps someone else can figure it out.
k) Ok, so I know the PS3 will play Dolby via Blu-Ray, so I export my project to Encore but I discover that if Encore has to re-encode the audio, it will always convert it to Stereo, and the only format that it will bring in is an .ac3 file that has the dolby embedded in it. If dolby is already embedded in the .ac3 file, it will play it just fine. For Video, it is easy, just select H.264 Video - Blu Ray. Now, when you go down to the Audio tab you will see a choice for the Codec of SurCode for Dolby Digital. This will actually send out a dolby 5.1 audio .ac3 file...isn't that wonderful? The bad news is, this does not come with your product, you have to shell out another $300 for this privilege. You can trial it for 3 times, but it won't show up as having any available unless you right click on Premiere Pro when you launch it and launch it in administrative mode. When you perform the export and select Surcode, it will do it correctly and you can bring it into Encore which will not retranscode and it works great. I dont' know about you, but I purchased the full Master Collection and I think it is crazy that Adobe allows you to create and edit in 5.1, but not export it without paying more money. I have filed a complaint, but have not heard back...Adobe technical support also confirmed this is your only option.
However, there is another option. There is a program called OJOSoft Audio Converter
http://www.ojosoft.com/help/help-audio-converter.html
and it only costs $22. It will convert a .aac 5.1 encoded file and convert it to a .ac3 file..dolby intact! When you lauch it, you just need to remember to click the edit button under the ac3 profile and select "original" under the number of channels. It works great...it doesn't have the same number of options as Surcode, but it does work. I am still mad about the whole Surcode thing, but am hopeful that Adobe will make it right and include it at least in the Master Collection for goodness sakes.
l) So, the trick is when you export the video using H.264 blu ray, uncheck the export audio. Then choose the "Audio Only" format when you export again, and select 5.1 Channles and I increase the Bitrate to 192 for better quality, this will export a .aac file with the 5.1 embedded. Then just run the OJOSoft converter and bring the converted .ac3 file into Encore. Burn away to blu-ray and you are good to go.
In conclusion, I hope this helps others and if you have more tricks or tips, please add to this thread, I am particularly interested in anyone that can figure out a format that will play over the netowork to a PS3 (Heck I will even take Stereo at this point, but the dream is 5.1).
Enjoy

Hi there,
just checking my DD Options for a concert I have recorded with our choir (non Commercial stuff that is) but what irritates me, maybe because your Version of Premiere CC has been altered, is the following:
" Then choose the "Audio Only" format when you export again, and select 5.1 Channles and I increase ...."
I can unclick Video Export and just leave Export Audio. And if I click Dolby Digital that is the closest I get to it. My Master says 5.1 as I have changed all relevant layers from Stereo into 5.1 and the Levels give me 5.1 as well, but I can neither see any "Audio Only" Format and not choose 5.1 Channels at all. And it does not make any difference wheather I choose the Queue-Option for the media Encoder or Export it straight away. So how come that you got more Options? However, when I could create a "Dolby Digital" (Stereo) file (that Comes up in Premiere) it gives me the ending AC3, but according to my Screen it will only be Stereo. And last time I tried it (some month ago) all I got was noises .... instead of Stereo.
First I wanted to download the Trial Version of Surcode (yet I am not even sure which one to pick from their webside ... the normal 5.1 code? And then: a few weeks ago, when I started hunting down Options for 5.1 sounds (actually it is mostly the audience "noise" that has to come from the Speakers) I learned from one webside that Pinnacle for their studio and the Surcode would only cost like 10 Dollars extra and some People would ask why on Earth are they getting that Option whilst Adobe is charging a month income (well a Little less). So maybe Pinnacle has much better Connections to that Company. Yet, if I look at other Prices they have, then only companies who are well off, can afford that. Or rich People. So as a private Person, who want to give People "simple" Surround Sound, that has become so normal, is basically screwed.
However: I wonder if I can get any advice. Currently I do render all stuff with the Options I have (yet for iPad, the QuickTime-Option has to be done seperately because there is no Action in the Encoder if I put it in the Queue. BluRay and DVD have been accepted but no Quicktime. Well I still got til the Weekend to get it sorted and then the 4-disc-set (BD, DVD, DVD-Rom (with files for iPad, iPhone, Android in various sizes as People have various RAM on their devices) and CD - already delivered) will have to be ready.
Thanks for any reply in advance.
Ronnie

My ipad was dropped, and I just want to know if I have a warranty still or If I have one at all to see if I can get it fixed without paying a ton of money?

It was just small spider web cracks in three of the corners. It's not but I just don't want to pay a ton of money. I just need to see if my warranty can get my ipad fixed without paying a ton of money. So how do I figure out if I still have a warranty?

It will cost you approximately US$219.00 to US$299.00 depending on the model.
Apple will replace the entire iPad; they don't repair.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad

Canceling service without paying eft for no service area

I have called to cancel my cell phone service but was told needed to pay an early termination fee of $140.00. I explained to the customer service agent that I was speaking to that I do not get any service on my cell phone in which I work. I get horrible service at my home and absolutely none outside of my home. I am a police officer and patrol through several counties and my cell phone is my life line. I had to get an AT&T cell phone due to the fact that it is the only coverage in my Area. I don't want to pay this ridiculous fee. The contract is up in march of 2014 which is less than 3 months away. Can I just cancel without paying an early termination fee.

Dell86 wrote:
... I don't want to pay this ridiculous fee. The contract is up in march of 2014 which is less than 3 months away. Can I just cancel without paying an early termination fee.
Why now? If the service is so terrible - why wait until 21 months into the contract before deciding to cancel? And if the phone is so vital to your job, doesn't the police department provide you with a reliable device?
The short answer to your questions is no, you can't cancel without paying the ETF. Which is more cost effective? Keep the line for three more months, or pay the $140? Is the bill more than $50 a month?

Can the macbook pro accept a 30 inch monitor without paying extra

Does the mbp allow video out to a 30 inch monitor without
paying extra for the adaptor if an adaptor is even needed?
i.e is the video card to run a 30 inch monitor already included?

Since you can add in the build to order on the store the 30" LCD without paying any more than the 30" LCD on its own, I can only surmise it includes everything you ened for the 30" LCD. I'd go to one of the stores here:
http://www.apple.com/retail/
and verify.

Is there any way i can upgrade to an iPhone 5C without paying a fee?

I lost my old phone and my 2 year contract is still going but i need a phonne but i dont want to spend too much money on getting an unlocked phone HELP
PLEASE

It seems to be a question about how much is too much money.
No, you will not be able to get an iPhone 5C without paying a fee, unless you know someone who is willing to give you theirs.
If you are currently under contract, you would have to pay full retail for the phone if purchasing at Verizon or another 3rd party retailer.
You could try checking on sites such as swappa.com, but I would suspect any iPhone 5C currently selling on there would be close to full retail.
You could also try talking someone into extending their contract and then selling the phone to you at the discounted price. They may do this if you promised to do the same for them when you complete your contract. It would obviously have to be someone who trusted you quite a bit, though.
Good luck.

My Ipod classic is corrupted and I only get the red X on the screen...Cannot move to any other screens. Any ideas on fixing without paying Applw?

My Ipod classic is corrupted and I only get the red X on the screen...Cannot move to any other screens. Any ideas on fixing without paying Applw?

Unfortunately there isn't. A Red X is usually an indicator that the HDD has failed, if you are unable to restore the device using iTunes and also not able to reformat using windows prior to restoring then a hardware repair is needed. If your iPod is out of warranty then the pricing you pay is to have the iPod replaced not repaired. You're looking at 129.00 - 179.00 plus shipping depending on the gen.

I've downloaded the wrong version as I thought I had a previous subscribed product. How do I change it to the full product without paying twice?

I've downloaded the upgrade instead of the full version of Acrobat XI Pro. i thought my previous version just needed to be upgraded but it obviously doesn't have a serial number. How can I download an upgraded version without paying the full price as I've already paid for the upgrade?

Your explanation is a bit confusing. If you purchased an upgrade then you need to have purchased a previous version from which you are upgrading. If you purchased an upgrade without having a previous version then you need to return/cancel that order and purchase the full version at the full version price.
In terms of the software itself, the full version and the upgrade version are the same file. The serial number you acquire from your purchase dictates whether a version is processed as a full version or an upgrade version.

I need out of my contract without paying ETF!!!

Similar Messages

Maybe you are looking for