I need to query, sort and calculate multiple levels
create table test_one(
col1 number(12),
col2 number(5),
col3 number(3),
col4 number(4));
commit;
insert into test_one values(111223333, 11111, 1, 3);
insert into test_one values(111223333, 11111, 5, 4);
insert into test_one values(333445555, 33333, 2, 1);
insert into test_one values(333445555, 33333, 4, 2);
insert into test_one values(566462114, 22222, 3, 1);
insert into test_one values(566462114, 22222, 1, 5);
insert into test_one values(328593522, 77667, 4, 6);
insert into test_one values(328593522, 77667, 6, 1);
insert into test_one values(453212345, 33442, 5, 2);
insert into test_one values(453212345, 33442, 3, 5);
insert into test_one values(765483432, 76543, 6, 5);
insert into test_one values(765483432, 76543, 1, 6);
insert into test_one values(453212345, 33442, 2, 4);
insert into test_one values(328593522, 77667, 3, 4);
insert into test_one values(111223333, 11111, 4, 2);
insert into test_one values(566462114, 22222, 5, 1);
I need a procedure or function to sort by col2
111223333, 11111, 1, 3
111223333, 11111, 5, 4
111223333, 11111, 4, 2
then order by the col4
111223333, 11111, 4, 2
111223333, 11111, 1, 3
111223333, 11111, 5, 4
if there are numbers duplicate or missing in col4 between 1-6
then assign a 0 to the missing numbers and choose the highest of the duplicate number. but only one number for each 1-6
then choose the top three highest number to do calculations on.
after this there will be calculations added to the contents of the procedure.
thank for your help.
select * from test_one order by 2,4
What do you mean by duplicates or missing in col4? With the data you have, what are the expected results you want to see?
Please explain more.
Similar Messages
-
I need to back up and sync multiple iPhones to a single iMac. Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others. How can I do this without getting all of the contacts, etc. mixed? Tnx
This might help: http://support.apple.com/kb/HT1495.
-
Table sorter and pie chart in sapui5
Hi ,
I have one combobox and table(i have table columns city , state, country, zone).... on change of combobox value(combobox values are city , state...) i want to sort table and display pie chart according to sorted table values.
Can anyone help me on this....
Regards,
Sathish.Hi Sathish,
You can refer below link, it will help you to build your own custom solution. It has everything you need.
Custom sorter and filter in SAPUI5 Table
Regards,
Shankar -
Is it a good idea to do this with a very large amount of objects in a transport?
What does it do exactly? Is there any risks?
Seemed like when I did it before one of the things it did was it would take a table doc object and compress it with the actuial table object itself
Thanks any feedback is appreciated.There is no limitation and you can transport number of objects with in single transport request.
no need to do sort and compress.
Thanks
Seshu -
Hi All,
Please have a look in to the below mentioned environment.
primary site :SITE 1
server 1
server 2
secondary site :SITE 2
server 3
Note : All the above three servers are in single DAG .All the database are mounted on the server (server 1) which is located in the primary site (I.E SITE 1).
On that 5 databases we are having 3500 users .Based on the user designation we have allocated the mailbox size.
Query : Each and every day we are having the large no copy queue length for all the five databases to the server located in SITE 2.
Please help me out on this and also tell me is there any tool available to exactly get the required bandwidth for the exchange servers located between the active directory sites.
Thanks & Regards S.NithyanandhamI don't know of any tool that can calculate things for you but latency is the biggest thing you have to worry about. The other issues is looking at the network gear between the 2 sites. I have seen many times were switches get maxed out if they are set to
1 GB or even ports getting maxed out and need to bonded for more throughput. Test your latency from the edge of each site then test it within to see if there is a difference.
Regardless of their geographic location relative to other DAG members, each member of the DAG must have round trip network latency no greater than 500 milliseconds between each other member.
As the round trip latency between two Mailbox servers hosting copies of a database increases, the potential for replication not being up to date also increases. Regardless of the latency of the solution, customers should validate that the networks between
all DAG members is capable of satisfying the data protection and availability goals of the deployment. Configurations with higher latency values may require special tuning of DAG, replication, and network parameters, such as increasing the number of databases
or decreasing the number of mailboxes per database, to achieve the desired goals.
Round trip latency requirements may not be the most stringent network bandwidth and latency requirement for a multi-datacenter configuration. You must evaluate the total network load, which
includes client access, Active Directory, transport, continuous replication, and other application traffic, to determine the necessary network requirements for your environment.
http://technet.microsoft.com/en-us/library/dd638104(v=exchg.150).aspx
DJ Grijalva | MCITP: EMA 2007/2010 SPA 2010 | www.persistentcerebro.com -
Multiple columns from a query sorted vertically
Is it possible to sort a query resultset vertically, with
multiple columns across the page, in the following manner, with
page breaks after 40 rows? I can get it to sort horizontally just
fine with tables, but how can it be done vertically as shown?
JONES, Abby JONES, Betty JONES, Dawn JONES, Frank
JONES, Adam JONES, Bill JONES, Debbie JONES, Gayle
JONES, Alice JONES, Bob JONES, Denton JONES, Henry
JONES, Ben JONES, Cathy JONES, Emma JONES, JohnThis will get you started. I assume you had the appropriate
order by clause in your query. I also assume you want 4 columns per
line.
My approach would be to convert the query to an array and
then output the array.
columns = 4;
maxrows = 40;
recordsperpage = columns * rows;
records = query.recordcount;
myArray = ArrayNew(2);
ThisColumn = 1;
ThisRow = 1;
if (records gt recordsperpage)
LoopTill = recordsperpage;
else
LoopTill = records;
for ( ii = 1; ii lte LoopTill; ii = ii + 1){
myArray[ThisRow][ThisColumn] = query.field[ii];
increment ThisRow;
if (ThisRow = MaxRows + 1) {
ThisRow = 1;
increment ThisColumn;
} // if
} // looop
You can do the rest -
Need the query to calculate the time taken to excute it.
hi all,
i need the query to calculate the time taken to excute it.
for ex:
select * from emp;
how much time it will take to give o/p
Thanks in advance
satyaJust to add to what was said - the execution can each time be DIFFERENT as the factors that governs performance are NOT CONSTANT.
If Oracle has no idea how long the query is going to take before executing it, then how can you and your code know?
Oracle's CBO estimates the cost (expense) of the query. This is an indication of how expensive a query is - and the more expensive the query, the more resources need to be used, the longer the query will take. The less expensive the query, the fewer resources it need, the faster it will take.
And that is it. How fast or how slow? Oracle does not know. How much faster a query with a cost of 10,000 versus a query with a cost of 1? Oracle does not know.
Why? Because the platform is not constant. Just what data is at this exact moment in the db buffer cache? Just how much CPU capacity is available for the new few seconds? Just what will the sustained throughput be of the I/O subsystem and channels for the next minute? Just how many memory pages need to be swapped between cache and memory? Etc. etc.
All these factors change every single second. So forget about attempting to accurately calculate up-front the time it will take for a query. IT IS NOT POSSIBLE. -
Sorting and Grouping -Two months in this query
Hi All,
many thanks for jeneesh
i am doing project for construction company, i face this problem in grouping points according to relation between these points the
Relation is from 1 to 100. If the point between this rang that mean there is relation between these points.
this question already solve but the results not correct when the table has more data.
SQL - sorting and grouping.
from jeneesh and many thanks for him.
This example for more clarifications
for example i have these points
id location percentage comments
1 loc 1,2 20% that mean point 1 and 2 close to each other by 20%
2 loc 1,3 40% that mean point 1 and 3 close to each other byy 40%
3 Loc 8,6 25% that mean point 8 and 6 close to each other by 25%
4 Loc 6,10 20%
5 LOC 11,10 10 %
6 LOC 15,14 0%Also , we can see the relation between these points as follwoing
- points 1,2,3 in one group why becuase 1,2 has relation and 1,3 has relation that mean 1,3 also has hidden relation.
- Points 6,8,10,11 in second group there are relations between them .
- but no relation between 1 or 2 or 3 with any point of 6,8,9,10,11
- as well as no relation between 15, 14 that mean 14 in third group and 15 in fourth group.
whati need?
to group the points that has relation according to percentage value ascending
The most important part is to group the points. SO , the below query the gropuing is not correct.
I have the follwoing table with data
drop table temp_value;
create table temp_value(id number(10),location varchar2(20), percentage number(9));
insert into temp_value values (1,'LOC 1,2',10);
insert into temp_value values (2,'LOC 1,3',0);
insert into temp_value values (3,'LOC 1,4',0);
insert into temp_value values (4,'LOC 1,5',0);
insert into temp_value values (5,'LOC 1,6',0);
insert into temp_value values (6,'LOC 2,3',0);
insert into temp_value values(7,'LOC 2,4',0);
insert into temp_value values (8,'LOC 2,5',30);
insert into temp_value values (9,'LOC 2,6',0);
insert into temp_value values (10,'LOC 3,4',0);
insert into temp_value values (11,'LOC 3,5',0);
insert into temp_value values (12,'LOC 4,5',40);
insert into temp_value values (13,'LOC 4,6',0);
insert into temp_value values (14,'LOC 6,7',40);
insert into temp_value values (15,'LOC 7,2',0);
insert into temp_value values (16,'LOC 8,2',60);
insert into temp_value values (17,'LOC 8,3',0);
insert into temp_value values (18,'LOC 3,1',0);
insert into temp_value values (19,'LOC 9,6',30);
insert into temp_value values (20,'LOC 11,2',0);
insert into temp_value values (22,'LOC 12,3',10);
insert into temp_value values (23,'LOC 19,3',0);
insert into temp_value values (24,'LOC 17,3',0);
insert into temp_value values (24,'LOC 20,3',0);when i used this query , the results is not correct
with t as
(select percentage,loc1,loc2,sum(case when percentage = 0 then 1
when loc1 in (l1,l2) then 0
when loc2 in (l1,l2) then 0
when l1 is null and l2 is null then 0
else 1
end) over(order by rn) sm
from ( select id,location,percentage,
regexp_substr(location,'\d+',1,1) LOC1,
regexp_substr(location,'\d+',1,2) LOC2,
lag(regexp_substr(location,'\d+',1,1))
over(order by percentage desc) l1,
lag(regexp_substr(location,'\d+',1,2))
over(order by percentage desc) l2,
row_number() over(order by percentage desc) rn
from temp_value
order by percentage desc
select loc,min(sm)+1 grp
from(
select loc,rownum rn,sm
from(
select percentage,decode(rn,1,loc1,loc2) loc,sm
from t a,
(select 1 rn from dual union all
select 2 from dual ) b
order by percentage desc,decode(rn,1,loc1,loc2) asc
group by loc
order by min(sm),min(rn);the results
SQL> /
LOC GRP
2 1
8 1
6 2
7 2
4 3
5 3
9 4
1 5
12 6
3 6
11 13
LOC GRP
19 14
17 15
20 22
14 rows selected.SQL>
but the correct is
Location group No
2 1
8 1
4 1
5 1
1 1
6 2
7 2
9 2
12 3
3 3
19 4
17 5
20 6many thanks in advance.
Edited by: Ayham on Nov 30, 2012 3:07 AMThanks,
i want the sorting for each group DESC not all groups to gather
when i used your query i get
SQL> with connects as (
2 select distinct
3 loc1
4 ,loc2
5 ,dense_rank() over (order by connect_by_root(loc1)) grp
6 from temp_value
7 start with
8 percentage != 0
9 connect by nocycle
10 (prior loc2 = loc1
11 or
12 prior loc1 = loc2
13 or
14 prior loc1 = loc1
15 or
16 prior loc2 = loc2)
17 and
18 percentage != 0
19 )
20 , got_grp AS
21 (
22 select
23 loc
24 ,dense_rank() over (order by grp) grp
25 from (
26 select
27 loc
28 ,max(grp) keep (dense_rank first order by grp) grp
29 from (
30 select
31 loc1 loc
32 ,grp
33 from connects
34 union
35 select
36 loc2
37 ,grp
38 from connects
39 )
40 group by
41 loc
42 )
43 )
44 SELECT loc
45 , grp
46 FROM got_grp
47 ORDER BY COUNT (*) OVER (PARTITION BY grp) DESC
48 , grp
49 , loc
50 ;The output is
LOC GRP
1 1
2 1
4 1
5 1
8 1
6 3
7 3
9 3
12 2
3 2
10 rows selected.but i want it like this
Loc Grp
2 1
8 1
4 1
5 1
1 1
12 2
3 2
6 3
7 3
9 3So , the sorting for each group Separate based on the percentage column.
many thanks
Edited by: Ayham on Nov 30, 2012 9:43 AM -
Need MDX query to find something like date diff and Date Range for last 10 days
Hi ,
I need two Query .First Query for below;
I have below data in table like.
Cat StartDate EndDate
A 2000-01-01 2000-01-15
B 2000-01-02 2000-01-30
C 2000-01-01 2000-01-31
D 2000-02-01 2000-02-28
A 2000-01-10 2000-01-31
I need if Startdate and Date completes whole one month then set status =1 else 0 using MDX query.
like this ;
Cat StartDate EndDate Status
A 2000-01-01 2000-01-15 1
B 2000-01-02 2000-01-30 0
C 2000-01-01 2000-01-31 1
D 2000-02-01 2000-02-28 1
A 2000-01-10 2000-01-31 1
In second query I need last 10 days from current days like;
Now = 8/20/2014
output will be ;
8/20/2014
8/19/2014
8/18/2014
8/17/2014
8/16/2014
8/15/2014
8/14/2014
8/13/2014
8/12/2014
8/11/2014
8/10/2014
Please help me .
ThanksHi Prajapati,
In your scenario, you can use Properties and Datediff function to achieve your requirement. Since not know the structure of your cube, we cannot give you the esact query.
I have tested it on the AdventureWorks cube, the query below is for you reference.
WITH MEMBER [Measures].[StartDate]
AS
[Employee].[Employee Department].CURRENTMEMBER.PROPERTIES('Start Date')
MEMBER [Measures].[WorkYear]
AS
DATEDIFF('yyyy',[Measures].[StartDate],NOW())
MEMBER [Measures].[Status]
AS
IIF(DATEDIFF('yyyy',[Measures].[StartDate],NOW())>10,1,0)
SELECT {[Measures].[StartDate],[Measures].[WorkYear],[Measures].[Status]} ON 0,
[Employee].[Employee Department].[Employee].MEMBERS ON 1
FROM [Adventure Works]
Results
Reference
http://msdn.microsoft.com/en-us/library/ms144821.aspx
Regards,
Charlie Liao
TechNet Community Support -
Question
I can no longer (since upgrading to the latest firefox) open up multiple tabs of the same page (something I need to be able to do when emailing and referencing multiple emails while writing one email). The only option it gives me is to 'switch to tab'.I'll try to make this clear. I USED to be able to left click on a hyper link and the hyper link would open in a NEW tab. Now for some unknown reason the hyper link by default opens in the same tab (window). I have to right click the hyper link in order for it to open in a NEW tab. (Yes, my 'tools'> 'options'> 'tabs' are set to "open new windows in a new tab." (Please no answers telling me to get rid of the Ask toolbar because I don't have one.) Thank you.
-
Hi my question is how can I sort and delete photo files which I have had backed up multiple times? Another way how can I get rid of from the duplicate?
Provide the name of the program you are using so a Moderator may move this message to the correct program forum
The Cloud is not a program, it is a delivery process... a program would be Photoshop or InDesign or Muse or ??? -
apple cinema display will not allays start
i need to plug and unplug multiple times for ti to start.
any thoughts ideas would be helpful thanksOkay, Mr. Easthills, you have an imac, but yet you mention apple cinema display....Hmmm, curious. you could try zapping the PRAM, hold down command (apple?), Option+P+R keys while rebooting mac. Hold down for 3 chimes, then let go and boot normally. I have this problem too, and I have a 20" widescreen apple cinema display(DVI connector--did I just date myself or what?),anyways, it's behaving itself now okay, but it tended to go dark right in the middle of whatever I was doing, and only unplugging the power cord to the display, and replugging in it would fix it for a while. sometimes it would happen again, and again the same solution. As to why it happens now with Yosemite, I don't know . This dear old monitor has lasted me about 8 years and it's still going just fine.. not state of the art anymore, though...
oh well, good luck to you
John B -
really need urgent help - where do I find the entire list of all my email addresses? and how do I sort and organize them into folders ?
really need urgent help - where do I find the entire list of all my email addresses? and how do I sort and organize them into folders ?
-
Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click on a link or anywhere on the page we are redirected to this casino web site, https://casino.7bets10.com/tr/?from=hy9yKXD43jSC-8Oxbw4femNd7ZgqdRLk-dHJpeG9uaXR l. Its the same whether on Chrome or Safari. Does anyone have a solution, thank you!
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Need to display count and report both by using single Query
Hi All,
I got any requirement in that i need to display count and report both.
Like
Count os Unassigned=20
Count of Assined=23
Sr name summary etc ......
1 dssss sdsds dsds
2 sdada sdsd sdsds
3 dadad afds sdada And the problem is ,My Application is providing the single window where i can put a single query
so pls help me with thisI think you need to do it like this:
WITH x AS (
SELECT DECODE(name,NULL,0,1) AS ind, COUNT(*) AS counter FROM your_table
GROUP BY DECODE(name,NULL,0,1)
UNION SELECT 1,0 FROM dual
UNION SELECT 0,0 FROM dual)
SELECT DECODE(ind,0,'Count os Unassigned=','Count of Assined=') ||
TO_CHAR(SUM(counter)) FROM x GROUP BY ind;Replace your_table with whatever your table is called.
Maybe you are looking for
-
Hi, We have an report in which we are using FM :- REUSE_ALV_LIST_DISPLAY. In forgroud the Report Header is getting displayed only Once. When we run the report in background, we are getting in spool in which there are "Page Break and Header" in every
-
Error while deploying the application to remote server
Dear All, I am trying to deploy the application to remote server directly from jdeveloper ide.The server is on LAN and installed on other PC,I can also access the console and login correctly to console. After doing application server connection and t
-
Running a Crystal Report in CF5
Hello I have been asked to write an app to query a Sybase server and then run some reports, based on user input. I though about writing the reports in Crystal (I have Crystal Reports Professional 10) and then using Coldfusion (we use version 5 here :
-
Can someone tell me why scrubbing an H264 video is so painfully slow? It's not like I'm using a G3 or anything.
-
BT Infinity I - Serious Latency Issues
Dear all I am having serious intermitent latancy issues. It goes from 36ms up to 2200ms every 3 or so minutes. Pls see below. What can I do? Reply from 212.58.244.66: bytes=32 time=36ms TTL=50 Reply from 212.58.244.66: bytes=32 time=36ms TTL=50 Reply