I need to switch a 12V relay using USB6211.i am stuck with programming
i need to switch a 12V relay using USB6211.i am stuck with programming using daq assistant. i am doing hardware implementation also..can anyone give some help...
You can create tasks with individual lines and ports and then have multiple tasks all running for the same device. I would highly recommend the DAQmx VI API. It gives a little better control and is easier to see exactly what is happening.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Similar Messages
-
How do I know what OS I have on my iMac? I've used it as a PC for years and need to switch over but I may be out of date with current software. I think I read Lion somewehere....? OS 10.5.8
Click on the Apple icon at the top left of your menu bar, then About this Mac.
OS 10.5.8 is Leopard. Lion is 10.7
As for upgrading:
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
http://support.apple.com/kb/DL1399
Check via Software Update whether further updates are required.
You should now see the App Store icon, and you now need to set up your account:
http://support.apple.com/kb/HT4479
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/ -
Need to switch my iTunes account to a new Windows computer (with other issues)
I am trying to switch my iTunes account over to my Windows laptop. My old Windows computer is completely dead at the moment but I am trying to find someone to recover the data. All I have at this point is my ipod with the music on it, but I'm afraid that if I plug it into my laptop, it will delete the music from my account. Also, I need to figure out how to change the iTunes user on my laptop. My husband got an account which he never used, so I just need to log out and log on with my account that has the music synced the the ipod, but I couldn't find a way to do that. Any suggestions?
Hello, lnear259.
Thank you for visiting Apple Support Communities.
Here is an article that has some helpful information regarding moving your iTunes media to a new computer.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Cheers,
Jason H. -
Many apps I would like to download were out of reach because they needed the latest software download to work. I was extrememly excited to hear that the newest update was completely free and knew that it would help some of my problems. I was told that Mavericks could be installed straight from Snow Leopard, but I'm guessing a few updates have been missed on the way? How am I supposed to update my apps like Photo Booth when I am a student with low income and can't afford to buy things like Mountain Lion?
Is there anyway to update my apps without downsizing my software???First, I see from the screenshot that you have applications on your desktop - how did they wind up there? Any app should be installed in the Applications folder since that is where Software Update expects them to be when it searches for updates. So you might want to move your apps there. Do that, restart, and run Software Update again. If that does not update your very old version of Photo Booth, then I have only one suggestion: use recovery (hold down Command + R keys while restarting or rebooting) to re-download and install Mavericks again over the top of what you have.
-
I need to switch my iPod touch, 4S generation, to another computer. I use Dell, I origanally had it synched on a Dell laptop, but am not allowed to do so on that anymore. I am on a Dell PC, and want to change it over to this computer. How do I do that?
Plug it in and sync it.
It will erase the ipod content and replace with the content from the new computer so make sure that you have copied everything form the old computer, or your backup copy of the old computer, to your new one first. -
im having trouble using bbciplayer on my ipad it says i need to switch to wifi but im already connected can any one help? I ve uninstalled/ reinstalled switched it on and off what next?
Did you try downloading the movie from iTunes on your iPad? I know it takes longer but I'd try that.
Also try to reset all settings.
Settings > General > Reset. Reset all settings. -
DHCP Relay using Brocade Switches
Hi
I have a large project with 3 UCM cluster with unity cluster and UCCX
The network is a Brocade switch environement,
The Core is using OSPF and distribution is Layer 2.
I have configured the Cluster with a dedicated DHCP and TFTP service.
DHCP relay is not working, but when i configure one of the phones with a static IP address it registers and I have full functionality
When I connect my server dirrectly to the core which is not the design then the dhcp relay works and I get an IP address, but when i traverse the layer2 then i do not get an address.
In the same topology I connected a Windows DHCP server on the same vlan as my UCM cluster and change the relay address to point to the windows dhcp the i do get an address.
In an additional test i configured the same setup on cisco switches then the relay works great.
If anyone has seen or knows of any bug regarding DHCP relay i would be greatful for info
Thanks
LanceHi Experts,
i forgot to mention that i was reading an interesting document on Cisco website "network virtualization design guide", and they clearly mentioned the below:
"""VRF-awareness for DHCP-relay functionality is currently not supported on any Catalyst platform, but it is required only for supporting overlapping IP addresses"""
So i would like to ask you if you have any workaround to be done in such deployments
Thank you in advance
Samer Labaky
CCIE # 24675 -
My account was not valid for use in the U.S. store. I need to switch it to the malaysian store before purchase. How to setting it?
See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311 -
I am using 2 unit provided AC charger to charge my iPad mini. After a while, I checked the device. The battery is no longer in charge mode. It is only 80% charged. When I touch the AC charger, it is hot. I need to switch off the AC charger to let it cool down before continue to charge my iPad mini again. Of course it will be 100% charge but must make sure the AC charger is cool down completely.
I feel that the provided AC charger that is not suitable for our charging on iPad mini.I would book an appointment at an Apple Store, if you have one nearby, to have it looked at.
Genius Bar: Preparing for Your Apple Store Appointment -
One of my sons has an ipad mini and the other a larger ipad. The one using the mini needs a larger ipad for school, so they need to switch. They want to do so without losing their individual app progress. Can I simply switch the SIM cards?
SIM card has nothing to do with your Apple ID or apps.
IOS devices do not store anything on the SIM card.
BAckup everything on the iPads.
REstore tbe ipad from the backup of the other iPad.
REpeat for the other one. -
My iphone 4 keeps switching off if not used for an hour or so and needs the reboot to turn it on
My IPhone 4 keeps switching off if not used for an hour or so and needs the reboot to turn it back on again?
Hi, DREWidz.
Thank you for visiting Apple Support Communities.
It sounds like you are experiencing an issue with your device unexpectedly restarts. Here are some troubleshooting steps that may help.
iOS: Device unexpectedly restarts, displays Apple logo, or powers off
http://support.apple.com/en-us/TS5356
Cheers,
Jason H. -
Help need to switch Muse site to BC on a allready hosted plan
Hi, i also posted on BC forum...
I have a client that was in a hurry to have his emails accounts before the entire website.
So i went on and bought the email marketing plan (cos he will also need to do email campains) an pointed his domain everything is working fine, at this moment he has his accounts the domain is live.
The site would be just a small 7-10 pages not to complicated.
Has a graphic designer (who has venture into Business catalyst cos it had all the solutions i needed, well that's what the promotional videos said anyway) I made a site in Muse.
First i did a temporary page thats says "comming soon", and then i made the entire site, all the design and menu but with blank pages cos the client didnt have all the content yet (and still dont have). I uploaded that site to a sub directory so he could see the evolution.
He approved the design, yay!
At the end of the process, he told me he needed to have full control with the editor. (style, images, bulleted list, need to put downloadable document like pdf etc.) i told him that he could only modify what was allready there with the Muse in Browser editing (that he saw when i made the pitch using another site) he was impress with the way it worked.
so i told him i would have to remake "template".
I thought of using a BC template, and modify the looks to adapt to my client image, Of course, use a responsive theme so he could make the change at one place only. (cos in Muse you need to make the changes on the 3 layouts).
Now, i created a new temporary site using one of the new responsive template available.
How can i import that new site onto his live domain? In other words, how can a switch from a theme made in Muse, to a BC template?
cant i just delete everything in the root folder, and upload the entire new site via ftp?
please help me find the solution. i am a bit in a panic here
hope you could understand my lousy English.
Sincerely,
i.d.This would need to be transparent for m'y client...
Y
Envoyé de mon iPhone
Le 2014-04-20 à 15:29, Sanjit_Das <[email protected]> a écrit :
Re: help need to switch Muse site to BC on a allready hosted plan
created by Sanjit_Das in Help with using Adobe Muse CC - View the full discussion
Thanks for additional details.
Unfortunately we cannot change site template of a live site in BC , but as a workaround Create a site from BC using the template you wish to use then publish the site from Muse to the site created from BC and transfer the contents stored from live site to trial site. Ater final transition is done , you can delete the already paid site and make live the new trial site which includes new site template.
Thanks,
Sanjit
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6314730#6314730
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6314730#6314730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6314730#6314730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Help with using Adobe Muse CC at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
PYRO A/V Link XP,Vista, & Win7 switch settings + info for use in PE7
I see a lot of confusion regarding capture glitches and switch settings using the PYRO A/V Link. I looked at Canopus and others before I bought this one because it fit my budget. After I bought it I went through the glitches and the Support system of ADS Tech problems that others are experiencing.The settings I use worked on my Vista 32 bit laptop and without a hitch when I got my Windows 7 64 bit desktop using PE7. I"m sure they will work for PE8. I have a ton of VHS tapes that I am working with so my point of reference is for VHS capture. I am also using NTSC.
If you are ordering one what you will be ordering is an API-558-EFS. Or maybe you are using one of the API-550 units. Thjis information should work fine for the 550. There is NO API-558 unit unless this has changed since I bought mine. The BOX with an API-557, a power cord, and an outdated API-550 user manual is what constitutes an API-558. I know this because an irate ADS Tech rep told me. I emailed to find out why I didn't get an API-558 and that is what I was told. "We no cheat you. You got what you pay for".
I checked for updated drivers and info from ADS Tech and found a REVISION E. You can go online to their website and print it off if you like but I will dialog on this revision in the switch settings. I tried to get the ADS Tech rep to give me a serial number break as to when they changed from the 550 to the 557 units but did not get an answer. I think he said REV.E started with the API-557 but who knows seems to be answer.
Switch settings: I use #1 DOWN #2 UP #3 DOWN #4 DOWN and here are the reasons why.
The API-550 booklet/user manual shows a few windows versions. I refer to Windows XP because Vista and Win 7 seem to be offshoots of XP.
SWITCH NO. 1 for the API-550 (the API-557 and Vista and Win 7 are not in there) says DOWN for NTSC and Up for PAL . REV E says this has been changed to a black level (Color IRE) down being 0 IRE and up being 7 IRE(default). The ADS Tech rep told me the new unit Automatically detects NTSC or PAL. Do I believe him? Not at this point in time.
SWITCH NO.2 was not changed with REV.E UP for XP, Vista, and Win 7
SWITCH NO.3 was not changed with REV.E DOWN for XP, Vista, and Win 7
SWITCH NO.4 was originally (for the API-550) DOWN for LOCKED AUDIO and Up for Unlocked Audio. REV E. changed this to Down =12-bit/32kHz and Up =16-bit/48kHz Audio Sampling Rate
At this point in time I believe I have an API-550 with an API-557 sticker on it. My reasoning is that I import one long stream (60 to 90 minutes) of video from VHS into PE7 without stopping and after making a DVD where the video and sound separated further and further to about 5 minutes off at the end. I went back to switch #4 LOCKED AUDIO. I also didn't care about black level so I set the #! Switch DOWN fo make sure of NTSC. Depending on which unit you think you have you can experiment with the first and last switches. It is possible on short video you might not notice the video/audio separation. ALSO PE7 identifies the unit as an API-550 at the top of the capture screen/panel.(Capturing Device) Whether or not this is the result of windows drivers I don't know.
Connections I have a VHS/DVD Recorder unit with HDMI and Component Video (3 Video and R & L Audio) output. The PYRO AV link has Component Video IN which I use and the Canopus did not as I recall. I don't know what the other various units have as they were over my spending limit. The quality of Video I get seems really good.. If you are thinking about upgrading your VHS player look on the Back of the unit you think you want to buy and see if it has the Component Video output. The users guide says for DVD player out on my machine but works fine for VHS out. To connect the Pyro to computer you need Firewire as others have said. No USB connection.
One Major Glitch; Get off the Internet (as others have said) before you start trying to do video. This is even more important with an underpowered computer. My laptop had a switch I would flip to disconnect. My desk top Internet connection has to be disabled. or unplugged from router, or turn router off if you don't need it for other computers. If you don't know how to watch your task manager learn how to bring it up and watch it to see cpu and memory usage and the ammount of processes being used. RESTART the computer maybe more than once. What you will notice will be the number of processes being used will drop and the ammount of memory being used will drop. Restarting seems to dump all the Internet garbage at least till you get back on again and surf around and collect it again. I used to leave mine off the internet for several days and the movie making went smoothly. On my laptop it took up to 10% of the memory and the desktop takes 6+% of 12GB just to be on the internet. I started noticing this early on when things would lock up and I would have to restart anyway.
Starting; After you get off the internet, restart, bring up the task manager, and watch till things settle down to about 0 cpu usage, start PE7 or whatever Video program you want. Watch the task manager again and when everything is down to about 0 cpu usage, start a new project in the welcome screen. Where you want to put your project and how you name it is up to you. I make a new folder and put Everything in there. If you use an external hard drive make sure you dont forget to have it hooked up and on when your video program goes looking for projects the next time you open one up.
After you push ok and the selections come up for what type of video you are working with Click on the NTSC DV and it will give you a choice of 4:3 or 16:9 Wldescreen. I use the standard 4:3 because all of my footage is old and when playing a DVD later on, the newer TVs seem to be able to widen it out and on older TVs things look normal anyway. I click done and when mainscreen comes up select Get Media. I again select DV ( Camcorder) and the capture Window opens up.
I fire up my VCR, put a tape in and plug in the PYRO unit. I don't know if that's bad or not, I just got tired of pushing the teeny power button on the unit so I just plug or unplug the PYRO power cord. If the red light is not on the front of the PYRO push the button next to it and hold briefly. When you let go the Red light should be on for Analog. When you hook up one of these to the computer Windows may install a driver. Some firewire devices say you don't need a driver. With the PYRO TURNED ON, if you open up DEVICE MANAGER you will see the Pyro show up under IMAGING Devices. Imaging Devices does not show up in my machine until the PYRO is plugged in. Then when Imaging Devices shows up mine says AD API-550. Click on properties,then driver, and windows shows a driver. Says its an older driver but it works. If you don't see it listed before you try to import video you may have other issues.
Play some video through your VCR and make sure the light stays Red on the Pyro. You should see the Video in the Capture Window and also hear the audio. I let my VCR do some auto tracking, play and rewind and zero the counter when I reach the point I want to push the capture button. After a few times you can pretty much tell where the tape needs to be at the point you push capture. When capturing it will say capturing and a red line will appear around the window. If you push pause, that segment is pretty much a done deal. If it didn't capture enough video you may have to rewind and capture again and leave the first capture out of your project.
If you have glitches or the capture is screwy you may have to exit the project (save it if you alrerady have existing material in) RESTART and try again, or delete and start over. Once you learn what you want to do you shouldn't have that problem. I also learned early on to NEVER push the close button in the upper RH corner to close PE7 as you would normally do to close a window or program. PE7 didn't like that. Always use File and EXit.
Always wait for PE7 to settle down on each step before you try to do other things or you are going to lock things up depending on how fast your machine is. I have the Task manager to always be on top of other windows (under options at the top of Task Manager window). If it gets in the road I minimize the window and bring it back up whenever I think things are moving slow or I want to check something.
I have used this procedure for other movie programs and capture always works. Hope it works for others using PYRO. Hopefully I was to the point and this makes sense. Bill Hunt suggested I maybe post this to Muvipix but when I visited the Muvipix site there was Pyro stuff all over the place and I wasn't sure where to post. Maybe after he reads this he may not want me to post. Or If he thinks its ok material maybe he can scoot it over to Muvipix for me. Thanks again. I will watch this post to see if I was unclear on anything. Or if you guys clear up any mistatements you think I made.Steve,
I am pleased you thought this was good info. Please use it as you think it will do the most good. The reason I posted it to the main forum is because I am a novice when it comes to forum use. I wasn't aware of the fact there were sub forums (so to speak) until recently. The same for Muvipix.
What I mean is, that when I first found Adobe forums I was only looking at the main forum for answers, as I would guess other novices are doing. I found the PE portion, and that was as far as I went unless you guys had links to other stuff, and even then it didn't dawn on me that there was a Tips & Tricks or hardware sections, etc. I would type in PYRO for example, and if nothing came up in the main forum first to redirect me to something else, I thought that was all there was. Don't know if there are other novices thinking the same thing.
I apologize for my ignorance on posting to Muvipix. The format seems to be different and I found Pyro discussions there which seemed to be in several sub forums? So I posted here first and the only knowledge I have about sending this material to Muvipix (outside of re-typing the whole thing) would be to copy and paste it. (Bring up Muvipix in a separate Internet window along side Adobe and copy/paste). Sounds dumb, but as I said I am still computer illiterate. Also which section of Muvipix would I post it under? I'm pretty sure you guys have a better way of posting the same material in both forums at the same time than copy/paste. Thanks for the info. -
iPhone calendar appointments set to local calendar, and need
to switch to exchange calendar. Have to edit each appointment one at a time and
change to exchange calendar. Is there any method to edit all appoints in my
calendar at once and change the calendar setting?Not sure this will work but if you go into the Keyboard preferences, then click the Keyboad Shortcuts tab, and then the '+', you can add your own shortcuts for any application. I am not sure what happens if you try to override an existing shortcut since I haven't tried using this.
Edit/Update:
Probably against my better judgement I'll also throw this out there - there's an Unsanity haxie called Menumaster which might also allow you to do what you want. Against my better judgement because personally I stay clear of haxies. It's (all haxies) probably almost certain to break in Lion. They always do with each major release. -
The App Store said I needed to switch countries so I clicked the button and it switched it for me but now I can't update my apps but when I try to change it through settings it still says the country is the u.s. I don't know what to do to change it back
See > Change your iTunes Store country
Here > http://support.apple.com/kb/HT1311
If necessary Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Maybe you are looking for
-
My iMac does not sleep. The display does go to sleep but the computer itself does not, and as a result heats up like none other. Any help?
-
Still getting errors when I try to render
I've been working on a title and last week when i went to render I got an error message saying: "After Effects error: crash occurred while invoking effect plug-in "Shatter". then followed by a second message "After Effects error: Crash in progress.
-
Is there any hope for my 5S after it's dip?
Hi All I dropped my 5S in water two days ago. I got it out in seconds, powered it off, dried it with a cloth, removed sim, and shook all water out and placed it in rice. It's been in the rice in the airing cupboard for 48 hours. So I took it out a
-
Capacity requirement showing up in previous month in RCCP
Hi Experts, I am doing RCCP through MC88. But when i am giving the sales quantity in January and generating a synchronous production quantity, the capacity requirement and load are shown in the month of December instead of in January
-
Hi, Is it possible to have a NAT load blanacing service on a WRT310N router? I would like to setup a web farm that contains multiple webserver. If the router receives a HTTP request, it will automatically forward to request to any of the server in th