I need urgent help with the GPS

i've ask my family to buy Nokia n 97 from syria,while i live in cyprus,how ever i got the phone with a card inside the box says:
this nokia device has been specially designed and manufactured for this market.the satandard GPS features have been disabled in accordance with market regulations.
im using this mobile for the second day,i can't send it back to syria and i don't know what to do,i can't connect with the gps system in cyprus and i can't connect with the internet,please help me to find a way to enable the GPS system in my phone.
THanks a lot

As I explained in an earlier post, you WILL NOT be able to do it yourself.
If the hardware is just disabled (the error message may be misleading), a Nokia service point may be able to reactivate it, though you'd have to pay because the phone only has warranty in Syria and because this wouldn't be a warranty fix anyway.
If the hardware is removed, then you are more than likely stuck.

Similar Messages

Need urgent help with the query - Beginer

Hello - I need help with a query to populate data in a table.Here is the scenario.
Source1
MnthID BranchCod CustID SegCode FXStatus ProfStatus Profit
200712 B1 C1 20 Y Y 100
Source2
MnthID BranchCod CustID ProdCode ProdIndex
200712 B1 C1 12 1
200712 B1 C2 12 0
Destination
MnthID BranchCod SegCode ProdCode CountSegCust CountProdCust ProfitProdCust
Condition and Calculations:
1)Source1 customer are base customers.If Source2 has customers who is not in source1 then that customer's record should not be fetched.
2)SegCode, FX Status, ProfStatus is one variable in destination table. [ SegCode = SegCode+ FXStatus (if FXStatus = Y)+ ProfStatus (if FXStatus = Y) ]
3)CountSegCust = CountCustID Groupby MnthID,BranchCod,SegCode Only.
4)CountProdCust = CountCustID Groupby MnthID,BranchCod,SegCode,ProdCode (when ProdIndex = 1)
5)ProfitProdCust = Sum of Profit of Customers Groupby MnthID,BranchCod,SegCode,ProdCode (when ProdIndex = 1)
Apologies for bad formatting.
Thanks in advance!!

A total guess indeed.
It's not clear whether some aggregation can be done (summing counts of grouped data might cause some customers being counted more than once)
insert into destination
select mnthid,branchcod,segcode,prodcode,countsegcust,countprodcust,profitprodcust
from (select s1.mnthid,
               s1.branchcod,
               s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end segcode,
               s2.prodcode,
               count(s1.custid) over (partition by s1.mnthid,
                                                   s1.branchcod,
                                                   s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
                                          order by null
                                     ) countsegcust,
               count(case proindex when 1
                                   then custid
                     end
                    ) over (partition by s1.mnthid,
                                         s1.branchcod,
                                         s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
                                         s2.prodcode
                                order by null
                           ) countprodcust,
               sum(case proindex when 1
                                 then profit
                   end
                  ) over (partition by s1.mnthid,
                                       s1.branchcod,
                                       s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
                                       s2.prodcode
                              order by null
                         ) profitprodcust,
               row_number() over (partition by s1.mnthid,
                                               s1.branchcod,
                                               s1.segcode || case s1.fxstatus when 'Y' then s1.fxstatus || s1.profstatus end
                                               s2.prodcode
                                      order by null
                                 ) the_row
          from source1 s1,source2 s2
         where s1.mnthid = s2.mnthid
           and s1.branchcod = s2.branchcod
           and s1.custid = s2.custid
where the_row = 1Regards
Etbin

Need urgent help with Ifs1.1 on Solaris

We have installed IFS 1.1 with Oracle 8.1.7 on a three tier System (two Suns). We use JWS as WebServer. When we start IFS and JWS everything seems to work fine. But after some time (irregulary) we are not able to contact the JSP-Sites via a bowser. After restarting JWS, everything works fine for some time.
Sometimes it happens (about one times a day), that the whole JWS crashes (JWS-Admin doesn't work). So we have to restart the whole IFS.
What can be the problem? We need urgent help, because the deadline for our project is Wednesday.
By the way:
Where do I have to start CTX on the IFS- or the Oracle-Side?
null

Yes, we tried the Oracle HTTP - Server, but we weren4t able to get it to work. We didn4t get our JSP-Files to work with it. But that is another issue. I think it4s not a problem of JWS, but IFS.
Additionally it is strange, that we are still able to connect to the database via SqlPlus.
IFS works fine for about 15 minutes, than it crashes, nothing works anymore. We found following errors in the IfsAgents.log:
maybe it can help?!
Mon Dec 04 23:12:20 CET 2000
Server STARTED: IfsAgents(19944) not managed
Attempting to load agent EventExchangerAgent
Agent EventExchangerAgent loaded
Server STARTED: IfsProtocols(19945) not managed
Attempting to start agent EventExchangerAgent
EventExchangerAgent: Start request
Agent EventExchangerAgent started
Attempting to load agent ExpirationAgent
Agent ExpirationAgent loaded
EventExchangerAgent: starting timer
Attempting to start agent ExpirationAgent
ExpirationAgent: Start request
Agent ExpirationAgent started
Attempting to load agent GarbageCollectionAgent
Agent GarbageCollectionAgent loaded
ExpirationAgent: computed initial delay (in ms) is: 10024504
ExpirationAgent: starting timer
Attempting to start agent GarbageCollectionAgent
GarbageCollectionAgent: Start request
Agent GarbageCollectionAgent started
Attempting to load agent ContentGarbageCollectionAgent
Agent ContentGarbageCollectionAgent loaded
GarbageCollectionAgent: computed initial delay (in ms) is: 11816890
GarbageCollectionAgent: starting timer
Attempting to start agent ContentGarbageCollectionAgent
ContentGarbageCollectionAgent: Start request
Agent ContentGarbageCollectionAgent started
Attempting to load agent DanglingObjectAVCleanupAgent
Agent DanglingObjectAVCleanupAgent loaded
ContentGarbageCollectionAgent: starting timer
Attempting to start agent DanglingObjectAVCleanupAgent
DanglingObjectAVCleanupAgent: Start request
Agent DanglingObjectAVCleanupAgent started
Attempting to load agent OutboxAgent
Agent OutboxAgent loaded
DanglingObjectAVCleanupAgent: computed initial delay (in ms) is: 5500105
DanglingObjectAVCleanupAgent: starting timer
Attempting to start agent OutboxAgent
OutboxAgent: Start request
Agent OutboxAgent started
Attempting to load agent ServiceWatchdogAgent
Agent ServiceWatchdogAgent loaded
OutboxAgent: Done processing
Attempting to start agent ServiceWatchdogAgent
ServiceWatchdogAgent: Start request
Agent ServiceWatchdogAgent started
Attempting to load agent QuotaAgent
Agent QuotaAgent loaded
ServiceWatchdogAgent: Initializing ServerWatchdogTable with 9 entries
ServiceWatchdogAgent: starting timer
Server STARTED: FtpServer(20082) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Attempting to start agent QuotaAgent
QuotaAgent: Start request
Agent QuotaAgent started
QuotaAgent: starting timer
Server STARTED: CupServer(20124) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: ImapServer(20130) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: SmtpServer(20150) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Freeing unlocked server 19687
ServiceWatchdogAgent: Freeing unlocked server 19666
Server STOPPED: CupServer(19687) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19723
ServiceWatchdogAgent: Freeing unlocked server 19520
Server STOPPED: FtpServer(19666) managed by IfsProtocols(19519)
Server STOPPED: SmtpServer(19723) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19519
Server STOPPED: IfsAgents(19520) not managed
ServiceWatchdogAgent: Freeing unlocked server 19712
Server STOPPED: IfsProtocols(19519) not managed
Server STOPPED: ImapServer(19712) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
QuotaAgent: Timer event: 0 active; 0 exceeded
ContentGarbageCollectionAgent: Freed 5 unreferenced ContentObjects
QuotaAgent: Timer event: 0 active; 0 exceeded
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-11012: Unable to get events from other services
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in checkForDeadServices():
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in handle loop; continuing:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
null

Need some help with the Select query.

Need some help with the Select query.
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
select single vkorg abgru from ZADS into it_rej.
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
        VKORG TYPE VBAK-VKORG,
        ABGRU TYPE VBAP-ABGRU,
       END OF IT_REJ.
This is causing performance issue. They are asking me to include the where condition for this select query.
What should be my select query here?
Please suggest....
Any suggestion will be apprecaiated!
Regards,
Developer

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Need some help with the colour profile please. Urgent! Thanks

Dear all, I need help with the colour profile of my photoshop CS6.
I've taken a photo with my Canon DSLR. When I opened the raw with ACDSee, the colour looks perfectly ok.
So I go ahead and open in photoshop. I did nothing to the photo. It still looks ok
Then I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
And the colour started to get messed up.
And the output is a total diasater
Put the above photo side by side with the raw, the red has became crimson!!
So I tried the other option, Use the embedded profile
The whole picture turns yellowish in Photoshop's interface
And the output is just the same as the third option.
Could someone please guide me how to fix this? Thank you.

I'm prompt the Embedded Profile Mismatch error. I go ahead and choose Discard the embedded profile option
always use the embedded profile when opening tagged images in Photoshop - at that point Photoshop will convert the source colors over to your monitor space correctly
if your colors are wrong at that point either your monitor profile is off, or your source colors are not what you think they are - if other apps are displaying correctly you most likely have either a defective monitor profile or source profile issues
windows calibrate link:
http://windows.microsoft.com/en-US/windows7/Calibrate-your-display
for Photoshop to work properly, i recall you want to have "use my settings for this device" checked in Color Management> Device tab
you may want to download the PDI reference image to check your monitor and print workflows
and complete five easy steps to profile enlightenment in Photoshop
with your settings, monitor profile and source profiles sorted out it should be pretty easy to pinpoint the problem...

Need urgent help with HSDIO hardware timing

Hi everyone,
I need urgent help regarding HSDIO hardware timing. I've been working in a project which generating serial ramp using HSDIO pxie device.
I'm using clock rate 40MHz and generating 14 bit of boolean for each step of ramp. And I have to generate simply 256 steps ramp.
Which means, 256 (steps) x 14 (boolean array) x 25 ns (period of 1 boolean value) = 89,6 ns.
What I'm doing right now is with using index of FOR loop as my input data (converting the index into 14bit boolean), then write into pxie device in every iteration,
which means, my data is getting into output in every 1ms time, right? (I'm using windows)
And I want to be able to generate faster than that.
How can I prewrite my 256 steps ramp, then write them all at once into pxie device. I'm really stuck here.
In the picture can you see how I do the write into device in every iteration of FOR Loop.
Regards,
Yan.

hi, thanks for responding.
with using example of dynamic generation with script, I can manage to generate the ramp with controllable delay (generate the whole waveform, including delay with script command, then write to the card).
But I still have 1 question, I can test the output of the generation using oscilloscope and cant see the start delay (I'm writing delay at the start, before generating the ramp). My signal generated at 0 sec.
How can I check this start delay? is there any good example delivered with Labview to check this generation? Somehow I cant use the "dynamic generation and acquisition" example to see my generation (cant figure out how to capture the generated signal).
regards,
Yan.

I've just came on board from Andriod and need massive help with the Contacts application any one out there willing to help the 'noob'?

I had the folks at the store port over all of my contacts from my old
ratty Andriod phone to my new shiny iPhone.
however all 200+ of my contacts sort of "shook" out,
meaning say John Smith, on my old phone,
had in my contacts the following:
John Smith
123 Main St. Anytown, Anystate USA
555-826-4879 home
555-799-4247 cell
[email protected]
johnsmith@facebook
all nice and neat on my andriod but when it ported over
all that information was just scattered all over my contacts sort of like:
john smith, smith john
john smith 123 main st. etc.
johhn smith home 555 etc.
john smith cell 555 etc.
john smith johnsmith@ etc.
etc.
so for all those 200+ contacts in my phone, I've got a zillion of them now...
so I'd like to get this all back in order before I and Siri explode.
I know nothing, and I know even less about outlook and the sort.
But I do know I am in Dire need of help with this... I figured that eveything else
involving iphones and apple in general was supposed to be cake but it seems
like this is the only thing that isn't cake at all... unless, I'm just a right idiot. (which is possible, hence spelling and grammatical issues).

I believe I've tried to sync it with google, but it didn't seem to take
muchless take my calender. it seems to favor my facebook calender
more over my google calender, but Siri seems to be helping me re-write
it...but that's not the game here, it's the contacts. I've tried to export
the cvp (??) list and import it into my iTunes account. However, It only
doubled my issue because it didn't over write my existing contacts.

Need urgent help with communicating with the HP 4155B analyser with Labview

i folks,
I'm currently trying to communicate with our HP 4155B semiconductor pamaremter analyser. I do not have experience with GPIB yet. I have installed the NI VISA.
I was wondering if anyone could help with getting me started on how to start communicating with the device using Labview.
I'm not certain where to start.
Kind regards
Rob

Hi,
Thanks for the help. I now have communication with the instrument.
I was wondering if it's possible to to setup a data measurement (I-V Sweep) and be able to read the measurement data in realtime as it is being measured. So I basically see the graph updating itself on the PC during the measurement.
Is this possible? Could anyone give advice on how I can go about this or are there any examples that can help me understand how to do this?
I'm not completely sure how to initialise the instruemnt for communication and handle VISA WRITEs and READs. within LabView
Best regards
Rob

Need Urgent Help With Alesis Firewire 8: 10.6.5 cannot recognize the mixer?

I managed to install all the up to date drivers on the Alesis website (as instructed by the manual). THen restarted the computer and when i go to my SYSTEM PREFERENCES to change the AUDI/MIDI to the mixer, the mixer isn't even there as an option (although it is on and connected to my macbook via 6-6pin firewire cable!
-I also went on *ABOUT THIS MAC > MORE INFO > FIREWIRE >* nothing here just "Maximum Speed: Up to 400 Mb/sec"
- THen I went BACK TO SYSTEM PREFERENCES, under OTHER there is a MULTIMIX icon but when I click on it it says "+Preferences Error. You can’t open MultiMix Settings preferences because it doesn’t work on an Intel-based Mac.+"
- What im wondering about is the fact that I am running *Snow Leopard OSX 10.6.5* and on the alesis website [http://www.alesis.com/multimix8firewire#] Under Docs & Downloads of the Multimix FireWire 8, the latest drivers available for download are:
1)MultiMix FireWire - Macintosh Drivers [v3.5.3.8671]
Adds support for Mac OS 10.6.3 Snow Leopard.
Updated by Alesis 06/16/2010.
2) MB zip
MultiMix FireWire - Macintosh Drivers [v3.4.2.6300]
Adds support for Mac OS 10.6 Snow Leopard.
Updated by Alesis 09/14/2009.
Like i said, I am running * Snow Leopard OS X 10.6.5* so which one should I download? I have tried both and none have worked. I am frustrated. Somebody help me please! Thanks in advance.

Gave them a call today. Apparently, it has to do with the version software im running (10.6.5 SL) which is too high. Because their latest available driver for download is for 10.6.3, I have to obtain the retail instal disks from apple to reformat my mac back to 10.6.0.
Other than the fact that I had to wait 40 mins on phone hold before getting an Alesis customer service to help me, what bothers me the most is the fact that they said having a macbook with 10.6.3 should be compatible with their Alesis device, yet they were UNSURE about whether anything running higher than 10.6.3 would work with their interface. I think its important to let customers know that, yet they fail to do so.
Does anyone know how long it takes to receive retail snow leopard instal disks?
and thanks for the help!

I need some help with my GPS issue

I'm writing to ask you if You could somehow help me solve my GPS issue. I own Nokia 5800 XpressMusic. I've recently updated it's software and installed the new OVI Maps. I know that there is an option to use it offline which means without an Internet connection. When I start the Maps application and choose the offline mode, the only thing that appears at the top of the screen is "Searching position". The map is available but my position can't be specified without Internet on. When I turn my wireless router on, even though my maps are set in offline mode, it automatically connects to the Internet and spends something like 5KB download. If I keep navigating it spends even more. I've left my mobile phone offline to search for my position for an about half an hour but nothing happened. So, my question is, could you tell me what to do and how to use OVI Maps offline?

Assuming you are useing Maps 3.06 from beta labs and the map data is the latest compatible maps installed through ovi suite, then all should work well provided you followed the installation instructions correctly. If you don't use assisted gps or any other method of positioning except integrated Gps then you need to be in an open space with clear view of the sky to allow the GPS antenna to get a lock, this can take 10 to 30 minutes (the first time you try for a lock, shouldn't take that long again) and once you have a lock the location should work fine. The reason the other methods are available is thet they speed up the whole process and also work when in built up areas where buildings can block thre satelite view from the gps antenna. The amount of data used to lock your position is minimal and unless you have zero data allowance I suggest using all the positioning methods. If using the navigation abroad, you can disable evrything and simply use integrated GPS as long as you've loaded the local map data to your phone previously.
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Need some help with the Table Function Operator

I'm on OWB 10gR2 for Sun/Solaris 10 going against some 10gR2 DB's...
I've been searching up and down trying to figure out how to make OWB use a Table Function (TF) which will JOIN with another table; allowing a column of the joined table to be a parameter in to the TF. I can't seem to get it to work. I'm able to get this to work in regular SQL, though. Here's the setup:
-- Source Table:
DROP TABLE "ZZZ_ROOM_MASTER_EX";
CREATE TABLE "ZZZ_ROOM_MASTER_EX"
( "ID" NUMBER(8,0),
"ROOM_NUMBER" VARCHAR2(200),
"FEATURES" VARCHAR2(4000)
-- Example Data:
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (1,'Room 1',null);
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (2,'Room 2',null);
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (3,'Room 3','1,1;2,3;');
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (4,'Room 4','5,2;5,4;');
Insert into ZZZ_ROOM_MASTER_EX (ID,ROOM_NUMBER,FEATURES) values (5,'Room 5',' ');
-- Destination Table:
DROP TABLE "ZZZ_ROOM_FEATURES_EX";
CREATE TABLE "ZZZ_ROOM_FEATURES_EX"
( "ROOM_NUMBER" VARCHAR2(200),
"FEATUREID" NUMBER(8,0),
"QUANTITY" NUMBER(8,0)
-- Types for output table:
CREATE OR REPLACE TYPE FK_Row_EX AS OBJECT
ID NUMBER(8,0),
QUANTITY NUMBER(8,0)
CREATE OR REPLACE TYPE FK_Table_EX AS TABLE OF FK_Row_EX;
-- Package Dec:
CREATE OR REPLACE
PACKAGE ZZZ_SANDBOX_EX IS
FUNCTION UNFK(inputString VARCHAR2) RETURN FK_Table_EX;
END ZZZ_SANDBOX_EX;
-- Package Body:
CREATE OR REPLACE
PACKAGE BODY ZZZ_SANDBOX_EX IS
FUNCTION UNFK(inputString VARCHAR2) RETURN FK_Table_EX
AS
RETURN_VALUE FK_Table_EX := FK_Table_EX();
i NUMBER(8,0) := 0;
BEGIN
-- TODO: Put some real code in here that will actually read the
-- input string, parse it out, and put data in to RETURN_VALUE
WHILE(i < 3) LOOP
RETURN_VALUE.EXTEND;
RETURN_VALUE(RETURN_VALUE.LAST) := FK_Row_EX(4, 5);
i := i + 1;
END LOOP;
RETURN RETURN_VALUE;
END UNFK;
END ZZZ_SANDBOX_EX;
I've got a source system built by lazy DBA's and app developers who decided to store foreign keys for many-to-many relationships as delimited structures in driving tables. I need to build a generic table function to parse this data and return it as an actual table. In my example code, I don't actually have the parsing part written yet (I need to see how many different formats the source system uses first) so I just threw in some stub code to generate a few rows of 4's and 5's to return.
I can get the data from my source table to my destination table using the following SQL statement:
-- from source table joined with table function
INSERT INTO ZZZ_ROOM_FEATURES_EX(
ROOM_NUMBER,
FEATUREID,
QUANTITY)
SELECT
ZZZ_ROOM_MASTER_EX.ROOM_NUMBER,
UNFK.ID,
UNFK.QUANTITY
FROM
ZZZ_ROOM_MASTER_EX,
TABLE(ZZZ_SANDBOX_EX.UNFK(ZZZ_ROOM_MASTER_EX.FEATURES)) UNFK
Now, the big question is--how do I do this from OWB? I've tried several different variations of my function and settings in OWB to see if I can build a single SELECT statement which joins a regular table with a table function--but none of them seem to work, I end up getting SQL generated that won't compile because it doesn't see the source table right:
INSERT
/*+ APPEND PARALLEL("ZZZ_ROOM_FEATURES_EX") */
INTO
"ZZZ_ROOM_FEATURES_EX"
("ROOM_NUMBER",
"FEATUREID",
"QUANTITY")
(SELECT
"ZZZ_ROOM_MASTER_EX"."ROOM_NUMBER" "ROOM_NUMBER",
"INGRP2"."ID" "ID_1",
"INGRP2"."QUANTITY" "QUANTITY"
FROM
(SELECT
"UNFK"."ID" "ID",
"UNFK"."QUANTITY" "QUANTITY"
FROM
TABLE ( "ZZZ_SANDBOX_EX"."UNFK2" ("ZZZ_ROOM_MASTER_EX"."FEATURES")) "UNFK") "INGRP2",
"ZZZ_ROOM_MASTER_EX" "ZZZ_ROOM_MASTER_EX"
As you can see, it's trying to create a sub-query in the FROM clause--causing it to just ask for "ZZZ_ROOM_MASTER_EX"."FEATURES" as an input--which isn't available because it's outside of the sub-query!
Is this some kind of bug with the code generator or am I doing something seriously wrong here? Any help will be greatly appreciated!

Hello Everybody!
Thank you for all your response!
I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
I had created a Z table with the following fields :
ZADS :
MANDT
VKORG
ABGRU.
I had written a select query as below :
I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table
select vkorg abgru from ZADS into it_rej.
Earlier :
IT_REJ is a Work area:
DATA : BEGIN OF IT_REJ,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
Now :
DATA : BEGIN OF IT_REJ occurs 0,
VKORG TYPE VBAK-VKORG,
ABGRU TYPE VBAP-ABGRU,
END OF IT_REJ.
I guess this will fix the issue correct?
PLease suggest!
Regards,
Developer.

Need some Help with the new Genius Mixes on iTunes 9

I would like to know how to use the New Genius Mixes on iTunes 9. I don't quit know how to use it yet and like all of us we're all just learning how to use the Genius Mixes. I did watch the KeyNote but they didn't go into great detail on how to use it. Does Apple have a web site that has more detail instruction on how to use the genius Mixes? I did find some info. on how to use the Genius mixes but it didn't go into great detail on how or what to do with the genius Mixex and thats what I need.
when I click on the genius Mixes icon under the "Genius", what shows up is a Big square with four album images of my music that I have in my music collection, I go and roll my mouse over the Big square with my four music albums and click on it to play the music and it'll play what ever I have in the Genius Mix list plus as I roll my mouse over the Big Square, under it it says "Jazz Mix" with some text writings under the Jazz mix.
I want to change the Jazz mix Title and I want to know how to add more music square boxes to my Genius Mixes just like they show in the Keynote and I would like to edit and create my own four square music boxes in my Genius Mixes.
I never used my music genius list, I always created just a play List, now I am just learning how to use this music Genius lists and I don't know how to use it at all and I need someone that knows how to use thr Genius Mixes list to help me how to use it since there isn't a how to book yet for the new iTunes 9.
Can someone Please help me with the new genius Mixes on iTunes.
Thank you,
Mrs Trisha Foster

Today, I was getting an array out of bounds exception on a split
I don't see how that could happen with the 'split' method since it creates its own array.
For this particular string, ordSplit.length = 24 and commas = 26.
PERFECT! That is exactly what it should be!
Look closely at the end of the sample string you posted and you will see that it has trailing empty strings at the end: '1096200000000242505,,,'
Then if you read the Javadocs for the 'split' method you will find that those will NOT be included in the resulting array:
http://docs.oracle.com/javase/6/docs/api/java/lang/String.html#split(java.lang.String)
split
public String[] split(String regex)
Splits this string around matches of the given regular expression. This method works as if by invoking the two-argument split method with the given expression and a limit argument of zero. Trailing empty strings are therefore not included in the resulting array.
Just a hunch but your 'out of bounds exception' is likely due to your code assuming that there will be 26 entries in the array and there are really only 24.

Need urgent help with database startup

dear all,
i am using oracle 10g on windower server 32 bit.
i try to startup my database today, and it give me error, and it is my production database,
i need very urgent help from you.(i have no rman backup , and the data is not so necessory, since it is for student practice.)
SQL> startup open
ORACLE instance started.
Total System Global Area 524288000 bytes
Fixed Size                   790180 bytes
Variable Size             250343772 bytes
Database Buffers          272629760 bytes
Redo Buffers                 524288 bytes
Database mounted.
ORA-01110: data file 34: 'G:\ORACLE\DATAFILES_ACADEMY\ACADEMY'
ORA-01115: IO error reading block from file 34 (block # 1)
ORA-27070: async read/write failed
OSD-04016: Error queuing an asynchronous I/O request.
O/S-Error: (OS 23) Data error (cyclic redundancy check).regards.

Maahjoor wrote:
Hi dears,
i need further assistance from your side, i have restarted the server, but the same problem.
as there a way to drop and re-create a system tablespace? since the file 34 belong to system tablesapce.
regardsNo.
So just create a new database. That will take all of ten minutes. And tell your students to create new tablespaces. That will take them two minutes.

I need major help with the 5.0 device software!

I recently had to get a refurbished Blackberry Curve 8900 from T-mobile because my phone was no longer charging. The old one had the 5.0 update on it, this one however, does not. I know how to download it and everything, but when I am JUST about to click "finish" a message pops up that says
"Invalid Configuration
The Blackberry Device Software upgrade new features and significant enhancements to the Blackberry solution and, as such, is only available to users with an active BlackBerry subscription. To learn more about Blackberry service, please visit www.blackberry.com/service."
I don' t know what a BlackBerry subscription is.
I need help getting passed this, so I can continue on with device update.
Thanks!

Hi and Welcome to the Forums!
It is referring to a full BB data plan, the last one in this list:
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
That plan is what enables BIS -- BlackBerry Internet Service -- which enables all of the rich and proprietary features of BBs. If you had those before, then it sounds like your carrier has not completed shifting your prior account from your old BB to the new one (it is controlled by the BB PIN). I suggest you contact them for formal assistance.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I need your help with the Bios password!

Hi,
I'm using a satellite l305D-S5895 and i have a problem with the bios password. I was setting a password in the Bios or CMOS ( i don't know exactly). Every time i start up my computer, a blue box appears and ask me for the password. I know the password but I think it complicated and i want to take it off, and clear it. Please help me with that. If you guys have a way by turn of the battery or push the reset key inside the laptop, please give me some pictures to show that. Thanks a lot.

This does not sound like a Toshiba Bios password. The Toshiba passwords come on a black screen with white writing and say "Password =". Toshiba Service Centers have the tools needed to remove the password. provided that you can prove the computer is yours. So bring a proof of purchase and be prepared to pay, because password removal is not covered under warranty.

I need urgent help with the GPS

Similar Messages

Maybe you are looking for